[Mailman-Users] mailman postfix howto
LuKreme
kremels at kreme.com
Sun Sep 15 03:01:55 CEST 2002
On Saturday, September 14, 2002, at 06:22 PM, Roger Chrisman wrote:
> Am I blind?
Nope. REAME.POSTFIX is in 2.1b3 though. Might be useful.
Mailman - The GNU Mailing List Management System
Copyright (C) 2001,2002 by the Free Software Foundation, Inc.
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
GENERAL SETUP INFORMATION
Mailman should work pretty much out of the box with a standard
Postfix installation. As of this writing I've tested it with
Postfix 19991231 up to pl13, and with 200010228 up to pl08.
It is recommended that you set "owner_request_special = no" in
your main.cf config file so that Postfix won't treat -owner and
-request addresses specially (we want Postfix to simply deliver
such messages to the Mailman wrapper). The default is "yes" I
believe.
In order to support Mailman's optional VERP delivery, you will
want to disable luser_relay (the default) and you will want to set
recipient_delimiter for extended address semantics. Here, my
recommendations are to comment out any luser_relay value in your
main.cf and just go with the defaults. Also, set
"recipient_delimiter = +" so that the symbol used to separate an
address from its extended semantics is a + sign. This will work
well with the default values for VERP_FORMAT and VERP_REGEXP in
Defaults.py.
Finally, if you are using Postfix-style virtual domains, read the
section on virtual domain support below.
INTEGRATING POSTFIX AND MAILMAN
You can integrate Postfix and Mailman such that when new lists are
created, or lists are removed, Postfix's alias database will be
automatically updated. The following are the steps you need to
take to make this work.
In the description below, we assume that you've installed Mailman
in the default location, i.e. /usr/local/mailman. If that's not
the case, adjust the instructions according to your use of
configure's --prefix and --with-var-prefix options.
- If you are using Postfix-style virtual domains and you want
Mailman to honor your virtual domains, read the section below
first!
- Add this to the bottom of the $prefix/Mailman/mm_cfg.py file:
MTA = 'Postfix'
The MTA variable names a module in Mailman/MTA which contains the
MTA-specific functions to be executed when a list is created or
removed.
- Look at the Defaults.py file for the variables POSTFIX_ALIAS_CMD
and POSTFIX_MAP_CMD command. Make sure these point to your
postalias and postmap programs respectively.
- Run the genaliases script to initialize your aliases file.
% cd /usr/local/mailman
% bin/genaliases
Make sure that the owner of the data/aliases and data/aliases.db
file is `mailman' and that the group owner for those files is
`mailman'. E.g.:
% su
% chown mailman.mailman data/aliases*
- Hack your Postfix's main.cf file to include the following path
in your alias_maps variable:
/usr/local/mailman/data/aliases
(no trailing .db). Do not include this in your alias_database
variable. This is because you do not want Postfix's newaliases
command to modify Mailman's aliases.db file, but you do want
Postfix to consult aliases.db when looking for local addresses.
You probably want to use a hash: style database for this entry.
Here's an example:
alias_maps = hash:/etc/postfix/aliases,
hash:/usr/local/mailman/data/aliases
- When you configure Mailman, use the --with-mail-gid=mailman
switch (actually, this will be the default if you configured
Mailman after adding the `mailman' owner). Because the owner of
the aliases.db file is `mailman', Postfix will execute Mailman's
wrapper program as uid and gid mailman.
That's it! One caveat: when you add or remove a list, the
aliases.db file will updated, but it will not automatically run
"postfix reload". This is because you need to be root to run this
and suid-root scripts are not secure. The only effect of this is
that it will take about a minute for Postfix to notice the change
to the aliases.db file and update its tables. I consider this a
minor inconvenience.
VIRTUAL DOMAINS
Postfix supports two styles of virtual domains, called
"Postfix-style" and "Sendmail-style". With the latter, all
aliases are visible in all domains, and nothing special need be
done with Mailman.
With Postfix-style virtual domains, things are a little trickier,
although Mailman should work well with it. First, you'll need to
add a path to Postfix's virtual_maps variable:
virtual_maps = <your normal virtual files>,
hash:/usr/local/mailman/data/virtual-mailman
assuming you've installed Mailman in the default location. Note
that you must follow Postfix's instructions for setting up the
virtual domains; get your virtual domains working in Postfix
first before integrating Mailman.
Next, in your mm_cfg.py file, you will want to set the variable
POSTFIX_STYLE_VIRTUAL_DOMAINS to the list of virtual domains that
Mailman should update. This may not be all of the virtual domains
that your Postfix installation supports! The values in this list
will be matched against the host_name attribute of mailing lists
objects, and must be an exact match.
Here's an example:
Let's say I've set up Postfix to handle the virtual domains
dom1.ain, dom2.ain, and dom3.ain. Let's say further that in
main.cf you've got the following settings:
myhostname = mail.dom1.ain
mydomain = dom1.ain
mydestination = $myhostname, localhost.$mydomain
virtual_maps = hash:/some/path/to/virtual-dom1,
hash:/some/path/to/virtual-dom2,
hash:/some/path/to/virtual-dom2
Let's say further that in virtual-dom1, you've got the following
lines:
dom1.ain IGNORE
@dom1.ain @mail.dom1.ain
This tells Postfix to deliver anything addressed to dom1.ain to
the same mailbox at mail.dom1.com, it's default destination.
In this case you would not include dom1.ain in
POSTFIX_STYLE_VIRTUAL_DOMAINS because otherwise Mailman will write
entries for mailing lists in the dom1.ain domain as
mylist at dom1.ain mylist
mylist-request at dom1.ain mylist-request
# and so on...
The more specific entries trump your more general entries and thus
breaking the delivery of any dom1.ain mailing list.
However, you would include dom2.ain and dom3.ain in mm_cfg.py:
POSTFIX_STYLE_VIRTUAL_DOMAINS = ['dom2.ain', 'dom3.ain']
Now, any list that Mailman creates in either of those two domains,
will have the correct entries written to
/usr/local/mailman/data/virtual-mailman
As above with the data/aliases* files, you want to make sure that
both data/virtual-mailman and data/virtual-mailman.db are user and
group owned by the `mailman' user/group. So to get things
started, set up your virtual domains, run bin/genaliases, and
check the ownerships of the files. From here on out, you should
be good to go.
AN ALTERNATIVE APPROACH
Fil <fil at rezo.net> has an alternative approach based on virtual
maps and regular expressions, as described at:
(French) http://listes.rezo.net/comment.php
(English) http://listes.rezo.net/how.php
This is a good (and simpler) alternative if you don't mind
exposing an additional hostname in the domain part of the
addresses people will use to contact your list. I.e. if people
should use mylist at lists.dom.ain instead of mylist at dom.ain.
I have not extensively tested this approach however.
Local Variables:
mode: text
indent-tabs-mode: nil
End:
--
There is no Satan. That's just god when he's drunk.
More information about the Mailman-Users
mailing list