[pypy-commit] extradoc extradoc: more text; corrections
Raemi
noreply at buildbot.pypy.org
Thu May 1 14:25:52 CEST 2014
Author: Remi Meier <remi.meier at gmail.com>
Branch: extradoc
Changeset: r5209:98a3ff04f14b
Date: 2014-05-01 14:25 +0200
http://bitbucket.org/pypy/extradoc/changeset/98a3ff04f14b/
Log: more text; corrections
diff --git a/talk/icooolps2014/position-paper.tex b/talk/icooolps2014/position-paper.tex
--- a/talk/icooolps2014/position-paper.tex
+++ b/talk/icooolps2014/position-paper.tex
@@ -69,14 +69,14 @@
have a problem. While there is certainly a lot of popularity around
languages like Python and Ruby, their ability to make use of multiple
cores is somewhat limited. For ease of implementation they chose to
-use a single, global interpreter lock (GIL) to synchronize the
+use a single, global interpreter lock (GIL) to synchronise the
execution of code in multiple threads. While this is a
-straight-forward way to eliminate synchronization issues in the
+straight-forward way to eliminate synchronisation issues in the
interpreter, it prevents parallel execution. Code executed in multiple
-threads will be serialized over this GIL so that only one thread can
+threads will be serialised over this GIL so that only one thread can
execute at a time.
-There exist several solutions and work-arounds to remove or avoid the
+There exist several solutions and workarounds to remove or avoid the
GIL in order to benefit from multiple cores. We are going to discuss
several of them and try to find the best way forward. The first
approach uses fine-grained locking to replace the single GIL. Then
@@ -96,7 +96,7 @@
These requirements are not easy to meet. We argue that STM is the
overall winner. While it has a big performance problem currently, it
gets more points in all the other categories. We think that it is the
-only solution that also provides a better synchronization mechanism to
+only solution that also provides a better synchronisation mechanism to
the application in the form of atomic blocks.
%% \subsection{Issue}
@@ -124,13 +124,13 @@
\section{Discussion}
\paragraph{dynamic language VM problems}
-
+XXX:
- high allocation rate (short lived objects)\\
- (don't know anything about the program that runs until it actually runs: arbitrary atomic block size)
\subsection{Why is there a GIL?}
-The GIL is a very simple synchronization mechanism for supporting
+The GIL is a very simple synchronisation mechanism for supporting
multi-threading in the interpreter. The basic guarantee is that the
GIL may only be released in-between bytecode instructions. The
interpreter can thus rely on complete isolation and atomicity of these
@@ -151,7 +151,7 @@
thread-safe can voluntarily release the GIL themselves in order to
still provide some parallelism. This is done for example for
potentially long I/O operations. Consequently, I/O-bound,
-multi-threaded applications can actually parallelize to some
+multi-threaded applications can actually parallelise to some
degree. Again, a potential solution should be able to integrate with
external libraries with similar ease. We will however focus our
argumentation more on running code in the interpreted language in
@@ -159,21 +159,21 @@
Since the GIL is mostly an implementation detail of the interpreter,
it is not exposed to the application running on top of it. To
-synchronize memory accesses in applications using threads, the
+synchronise memory accesses in applications using threads, the
state-of-the-art still means explicit locking everywhere. It is well
-known that using locks for synchronization is not easy. They are
+known that using locks for synchronisation is not easy. They are
non-composable, have overhead, may deadlock, limit scalability, and
overall add a lot of complexity. For a better parallel programming
model for dynamic languages, we propose another, well-known
-synchronization mechanism called \emph{atomic blocks}.
+synchronisation mechanism called \emph{atomic blocks}.
Atomic blocks are composable, deadlock-free, higher-level and expose
useful atomicity and isolation guarantees to the application for a
-series of instructions. Interpreters using using a GIL can simply
-guarantee that the GIL is not released during the execution of the
-atomic block. Of course, this still means that no two atomic blocks
-can execute in parallel or even concurrently. Potential solutions
-that provide a good way to implement atomic blocks are therefore
+series of instructions. Interpreters using a GIL can simply guarantee
+that the GIL is not released during the execution of the atomic
+block. Of course, this still means that no two atomic blocks can
+execute in parallel or even concurrently. Potential solutions that
+provide a good way to implement atomic blocks are therefore
preferable.
@@ -188,9 +188,9 @@
\item[Performance:] How well does the approach perform compared to the
GIL on single and multiple threads?
\item[Existing applications:] How big are the changes required to
- integrate with and parallelize existing applications?
-\item[Better synchronization:] Does the approach enable better
- synchronization mechanisms for applications (e.g. atomic blocks)?
+ integrate with and parallelise existing applications?
+\item[Better synchronisation:] Does the approach enable better
+ synchronisation mechanisms for applications (e.g. atomic blocks)?
\item[Implementation:] How difficult is it to implement the approach
in the interpreter?
\item[External libraries:] Does the approach allow for easy
@@ -210,7 +210,7 @@
Jython\footnote{www.jython.org} is one project that implements an
interpreter for Python on the JVM\footnote{Java Virtual Machine} and
-that uses fine-grained locking to correctly synchronize the
+that uses fine-grained locking to correctly synchronise the
interpreter. For a language like Python, one needs quite a few,
carefully placed locks. Since there is no central location, the
complexity of the implementation is quite a bit greater compared to
@@ -219,8 +219,8 @@
to avoid this issue.
In the end, fine-grained locking can transparently replace the GIL
-and therefore parallelize existing applications without any
-changes. It does however not provide a better synchronization
+and therefore parallelise existing applications without any
+changes. It does however not provide a better synchronisation
mechanism to the application like e.g. atomic blocks.
%% - support of atomic blocks?\\
@@ -248,13 +248,13 @@
long as the application does not need to communicate a lot, because
inter-process communication is relatively expensive. Also the
implementation of this approach is very cheap since one can
-actually take an unmodfied GIL-supported interpreter and run
+actually take an unmodified GIL-supported interpreter and run
multiple of them in parallel. That way, we also inherit the
easy integration of external libraries without any changes.
While the model of explicit communication is often seen as a
-superior way to synchronize concurrent applications because
+superior way to synchronise concurrent applications because
of its explicitness, it does not actually introduce a better
-synchronization mechanism for applications.
+synchronisation mechanism for applications.
%% - often needs major restructuring of programs (explicit data exchange)\\
%% - sometimes communication overhead is too large\\
@@ -292,16 +292,16 @@
to have a fallback in place in case this limit is reached. In recent
attempts, the usual fallback is the GIL (XXX: cite). The current
generation of HTM hits this limit very often for our use case (XXX:
-cite ruby GIL paper) and therefore does not parallelize that well.
+cite ruby GIL paper) and therefore does not parallelise that well.
The performance of HTM is pretty good (XXX: cite again...) as it does
-not introduce much overhead. And it can transparently parallelize
+not introduce much overhead. And it can transparently parallelise
existing applications to some degree. The implementation is very
straight-forward because it directly replaces the GIL in a central
place. HTM is also directly compatible with any external library that
-needs to be integrated and synchronized for use in multiple
+needs to be integrated and synchronised for use in multiple
threads. The one thing that is missing is support for a better
-synchronization mechanism for the application. It is not possible
+synchronisation mechanism for the application. It is not possible
in general to expose the hardware-transactions to the application
in the form of atomic blocks because that would require much
longer transactions.
@@ -326,9 +326,9 @@
limitations. Transactions can be arbitrarily long. This makes it
possible to actually expose transactions to the application in the
form of atomic blocks. This is the only approach that enables a better
-synchronization mechanism than locks for applications \emph{and} still
-parallelizes when using it. We think this is a very important point
-because it not only gives dynamic languages the ability to parallelize
+synchronisation mechanism than locks for applications \emph{and} still
+parallelises when using it. We think this is a very important point
+because it not only gives dynamic languages the ability to parallelise
(already commonplace in most other languages), but also pushes
parallel programming forward. Together with sequential consistency it
provides a lot of simplification for parallel applications.
@@ -337,35 +337,59 @@
%% (FastLane: low overhead, not much gain)\\
%% - unlimited transaction length (easy atomic blocks)
+
\section{The Way Forward}
-\begin{table}[]
+
+\begin{table*}[!ht]
\centering
- \begin{tabular}{|p{2cm}|c|c|c|c|c|}
+ \begin{tabular}{|l|c|c|c|c|c|}
\hline
- & \textbf{GIL} & \parbox[t]{1cm}{\textbf{Fine-grained locking}}
- & \parbox[t]{1cm}{\textbf{Shared-nothing}} & \textbf{HTM} & \textbf{STM}\\
+ & \textbf{GIL} & \textbf{Fine-grained locking}
+ & \textbf{Shared-nothing} & \textbf{HTM} & \textbf{STM}\\
\hline
- Performance & 0 & + & ++ & + & -{-} \\
+ Performance (single-threaded) & ++ & + & ++ & ++ & -{-} \\
\hline
- Existing applications & ++ & ++ & -{-} & ++ & ++ \\
+ Performance (multi-threaded) & -{-} & + & + & + & + \\
\hline
- Better synchronization & 0 & 0 & - & - & ++ \\
+ Existing applications & ++ & ++ & -{-} & ++ & ++ \\
\hline
- Implementation & ++ & - & ++ & ++ & ++ \\
+ Better synchronisation & - & - & - & - & ++ \\
\hline
- External libraries & ++ & ++ & ++ & ++ & ++ \\
+ Implementation & ++ & - & ++ & ++ & ++ \\
+ \hline
+ External libra\-ries & ++ & ++ & ++ & ++ & ++ \\
\hline
\end{tabular}
- \caption{Comparison (--/-/0/+/++)}
+ \caption{Comparison between the approaches (-{-}/-/o/+/++)}
\label{tab:comparison}
-\end{table}
+\end{table*}
-Comparison in Table \ref{tab:comparison}
+Following the above argumentation for each approach we assembled a
+general overview in Table \ref{tab:comparison}. The general picture is
+everything else than clear. It looks like HTM may be a good solution
+to replace the GIL in the future. Current implementations are however
+far too limiting and do not provide good scaling.
-possible solution:\\
-- use virtual memory paging to somehow lower the STM overhead\\
-- tight integration with GC and jit?
+Just allowing for parallel execution only means that dynamic languages
+catch up to all other languages that already provide real
+parallelism. This is why we think that only the STM approach is a
+viable solution in the long-term. It provides the application with a
+simple memory model (sequential consistency) and a composable way to
+synchronise memory accesses using atomic blocks.
+
+STM has a big performance problem. We believe that further work
+to reduce the overhead by closely working together with the
+hardware should be the focus of research. Hybrid approaches that
+combine STM and HTM for performance may be able to overcome this
+obstacle.
+
+
+
+
+%% possible solution:\\
+%% - use virtual memory paging to somehow lower the STM overhead\\
+%% - tight integration with GC and jit?
%% \appendix
@@ -375,7 +399,7 @@
\acks
-Acknowledgments, if needed.
+Acknowledgments...
% We recommend abbrvnat bibliography style.
More information about the pypy-commit
mailing list