[Python-checkins] CVS: python/dist/src Makefile.pre.in,NONE,1.1
Neil Schemenauer
nascheme@users.sourceforge.net
Wed, 24 Jan 2001 09:11:45 -0800
Update of /cvsroot/python/python/dist/src
In directory usw-pr-cvs1:/tmp/cvs-serv9034
Added Files:
Makefile.pre.in
Log Message:
Flat makefile based on toplevel Makefile.in and makefiles in build
subdirectories. Those other makefiles will go away eventually.
--- NEW FILE: Makefile.pre.in ---
# Top-level Makefile for Python
#
# As distributed, this file is called Makefile.pre.in; it is processed
# into the real Makefile by running the script ./configure, which
# replaces things like @spam@ with values appropriate for your system.
# This means that if you edit Makefile, your changes get lost the next
# time you run the configure script. Ideally, you can do:
#
# ./configure
# make
# make test
# make install
#
# If you have a previous version of Python installed that you don't
# want to overwrite, you can use "make altinstall" instead of "make
# install". This changes the install procedure so it installs the
# Python binary as "python<version>". The libraries and include files
# are always installed in a subdirectory called "python<version>".
# "make altinstall" does not install the manual page. If you want to
# make this installation the "official" installation but want to keep
# the old binary around "just in case", rename the installed python
# binary to "python<oldversion>" before running "make install".
# (This only works between different versions, e.g. 1.3 and 1.4 --
# different betas of the same version will overwrite each other in
# installation unless you override the VERSION Make variable.)
#
# In fact, "make install" or "make bininstall" installs the binary
# as python<version> and makes a hard link to python, so when
# installing a new version in the future, nothing of the current
# version will be lost (except for the man page).
#
# See also the section "Build instructions" in the README file.
# === Variables set by makesetup ===
MODOBJS= _MODOBJS_
MODLIBS= _MODLIBS_
# === Variables set by configure
VERSION= @VERSION@
srcdir= @srcdir@
VPATH= @srcdir@
CC= @CC@
CXX= @CXX@
LINKCC= @LINKCC@
AR= @AR@
RANLIB= @RANLIB@
# Shell used by make (some versions default to the login shell, which is bad)
SHELL= /bin/sh
# Use this to make a link between python$(VERSION) and python in $(BINDIR)
LN= @LN@
# Portable install script (configure doesn't always guess right)
INSTALL= @INSTALL@
INSTALL_PROGRAM=@INSTALL_PROGRAM@
INSTALL_DATA= @INSTALL_DATA@
# Shared libraries must be installed with executable mode on some systems;
# rather than figuring out exactly which, we always give them executable mode.
# Also, making them read-only seems to be a good idea...
INSTALL_SHARED= ${INSTALL} -m 555
MAKESETUP= $(srcdir)/Modules/makesetup
# Compiler options
OPT= @OPT@
DEFS= @DEFS@
CFLAGS= $(OPT) -I. -I$(srcdir)/Include $(DEFS)
LDFLAGS= @LDFLAGS@
LDLAST= @LDLAST@
SGI_ABI= @SGI_ABI@
# Machine-dependent subdirectories
MACHDEP= @MACHDEP@
# Install prefix for architecture-independent files
prefix= @prefix@
# Install prefix for architecture-dependent files
exec_prefix= @exec_prefix@
# Expanded directories
BINDIR= $(exec_prefix)/bin
LIBDIR= $(exec_prefix)/lib
MANDIR= $(prefix)/man
INCLUDEDIR= $(prefix)/include
CONFINCLUDEDIR= $(exec_prefix)/include
SCRIPTDIR= $(prefix)/lib
# Detailed destination directories
BINLIBDEST= $(LIBDIR)/python$(VERSION)
LIBDEST= $(SCRIPTDIR)/python$(VERSION)
INCLUDEPY= $(INCLUDEDIR)/python$(VERSION)
CONFINCLUDEPY= $(CONFINCLUDEDIR)/python$(VERSION)
LIBP= $(LIBDIR)/python$(VERSION)
# Symbols used for using shared libraries
SO= @SO@
LDSHARED= @LDSHARED@
CCSHARED= @CCSHARED@
LINKFORSHARED= @LINKFORSHARED@
DESTSHARED= $(BINLIBDEST)/lib-dynload
# Executable suffix (.exe on Windows and Mac OS X)
EXEEXT= @EXEEXT@
# Modes for directories, executables and data files created by the
# install process. Default to user-only-writable for all file types.
DIRMODE= 755
EXEMODE= 755
FILEMODE= 644
# --with-PACKAGE options for configure script
# e.g. --with-readline --with-svr5 --with-solaris --with-thread
# (see README for an explanation)
WITH=
# Subdirectories with code
SRCDIRS= @SRCDIRS@
# Other subdirectories
SUBDIRSTOO= Include Lib Misc Demo
# Files and directories to be distributed
CONFIGFILES= configure configure.in acconfig.h config.h.in Makefile.pre.in
DISTFILES= README ChangeLog $(CONFIGFILES)
DISTDIRS= $(SUBDIRS) $(SUBDIRSTOO) Ext-dummy
DIST= $(DISTFILES) $(DISTDIRS)
LIBRARY= libpython$(VERSION).a
LDLIBRARY= @LDLIBRARY@
DLLLIBRARY= @DLLLIBRARY@
LIBS= @LIBS@
LIBM= @LIBM@
LIBC= @LIBC@
SYSLIBS= $(LIBM) $(LIBC)
MAINOBJ= @MAINOBJ@
LIBOBJS= @LIBOBJS@
DLINCLDIR= @DLINCLDIR@
DYNLOADFILE= @DYNLOADFILE@
PYTHON= python$(EXEEXT)
# === Definitions added by makesetup ===
##########################################################################
# Modules
MODULE_OBJS= \
Modules/config.o \
Modules/getpath.o \
Modules/main.o \
Modules/getbuildinfo.o
# Used of signalmodule.o is not available
SIGNAL_OBJS= @SIGNAL_OBJS@
##########################################################################
# Grammar
GRAMMAR_H= $(srcdir)/Include/graminit.h
GRAMMAR_C= $(srcdir)/Python/graminit.c
GRAMMAR_INPUT= $(srcdir)/Grammar/Grammar
##########################################################################
# Parser
PGEN= Parser/pgen$(EXEEXT)
POBJS= \
Parser/acceler.o \
Parser/grammar1.o \
Parser/listnode.o \
Parser/node.o \
Parser/parser.o \
Parser/parsetok.o \
Parser/tokenizer.o \
Parser/bitset.o \
Parser/metagrammar.o
PARSER_OBJS= $(POBJS) Parser/myreadline.o
PGOBJS= \
Parser/firstsets.o \
Parser/grammar.o \
Parser/pgen.o \
Parser/printgrammar.o \
Parser/pgenmain.o
PGENOBJS= $(PGENMAIN) $(POBJS) $(PGOBJS)
##########################################################################
# Python
PYTHON_OBJS= \
Python/bltinmodule.o \
Python/exceptions.o \
Python/ceval.o \
Python/compile.o \
Python/codecs.o \
Python/errors.o \
Python/frozen.o \
Python/frozenmain.o \
Python/getargs.o \
Python/getcompiler.o \
Python/getcopyright.o \
Python/getmtime.o \
Python/getplatform.o \
Python/getversion.o \
Python/graminit.o \
Python/import.o \
Python/importdl.o \
Python/marshal.o \
Python/modsupport.o \
Python/mystrtoul.o \
Python/pyfpe.o \
Python/pystate.o \
Python/pythonrun.o \
Python/structmember.o \
Python/sysmodule.o \
Python/traceback.o \
Python/getopt.o \
Python/$(DYNLOADFILE) \
$(LIBOBJS)
##########################################################################
# Objects
OBJECT_OBJS= \
Objects/abstract.o \
Objects/bufferobject.o \
Objects/classobject.o \
Objects/cobject.o \
Objects/complexobject.o \
Objects/fileobject.o \
Objects/floatobject.o \
Objects/frameobject.o \
Objects/funcobject.o \
Objects/intobject.o \
Objects/listobject.o \
Objects/longobject.o \
Objects/dictobject.o \
Objects/methodobject.o \
Objects/moduleobject.o \
Objects/object.o \
Objects/rangeobject.o \
Objects/sliceobject.o \
Objects/stringobject.o \
Objects/tupleobject.o \
Objects/typeobject.o \
Objects/unicodeobject.o \
Objects/unicodectype.o
##########################################################################
# objects that get linked into the Python library
LIBRARY_OBJS= \
$(PARSER_OBJS) \
$(OBJECT_OBJS) \
$(PYTHON_OBJS) \
$(MODULE_OBJS) \
$(SIGNAL_OBJS) \
$(MODOBJS)
#########################################################################
# Rules
# Default target
all: $(PYTHON) sharedmods
# Build the interpreter
$(PYTHON): $(MAINOBJ) $(LDLIBRARY)
expr `cat buildno` + 1 >buildno1
mv -f buildno1 buildno
$(LINKCC) $(LDFLAGS) $(LINKFORSHARED) -o $@ $(MAINOBJ) \
$(LDLIBRARY) $(LIBS) $(MODLIBS) $(SYSLIBS) $(LDLAST)
buildno:
echo 1 >buildno
platform: $(PYTHON)
./$(PYTHON) -c 'import sys ; from distutils.util import get_platform ; print get_platform()+"-"+sys.version[0:3]' >platform
# Build the shared modules
sharedmods: $(PYTHON)
./$(PYTHON) $(srcdir)/setup.py build
# Build static library
$(LIBRARY): $(LIBRARY_OBJS)
-rm -f $@
# avoid long command lines, same as LIBRARY_OBJS
$(AR) cr $@ $(PARSER_OBJS)
$(AR) cr $@ $(OBJECT_OBJS)
$(AR) cr $@ $(PYTHON_OBJS)
$(AR) cr $@ $(MODULE_OBJS) $(SIGNAL_OBJS)
$(AR) cr $@ $(MODOBJS)
$(RANLIB) $@
# This rule is only here for DG/UX and BeOS!!!
libpython$(VERSION).so: $(LIBRARY)
case `uname -s | tr -d '/ ' | tr '[A-Z]' '[a-z]'` in \
*dgux*) \
test -d dgux || mkdir dgux; \
(cd dgux;ar x ../$^;ld -G -o ../$@ * ); \
/bin/rm -rf ./dgux \
;; \
beos) \
$(srcdir)/BeOS/ar-fake so $(LIBRARY) $@ \
;; \
esac
# This rule is here for OPENSTEP/Rhapsody/MacOSX
libpython$(VERSION).dylib: $(LIBRARY)
libtool -o $(LDLIBRARY) -dynamic $(OTHER_LIBTOOL_OPT) $(LIBRARY) \
-framework System @LIBTOOL_CRUFT@
# This rule builds the Cygwin Python DLL
libpython$(VERSION).dll.a: $(LIBRARY_OBJS)
dlltool --export-all --output-def $@ $^
$(LDSHARED) -Wl,--out-implib=$@ -o $(DLLLIBRARY) $^ \
$(LIBS) $(MODLIBS) $(SYSLIBS)
oldsharedmods: $(SHAREDMODS)
Makefile Modules/config.c: Makefile.pre \
$(srcdir)/Modules/config.c.in \
$(MAKESETUP) \
Modules/Setup.config \
Modules/Setup \
Modules/Setup.local
$(SHELL) $(MAKESETUP) -c $(srcdir)/Modules/config.c.in \
-s Modules \
Modules/Setup.config \
Modules/Setup.local \
Modules/Setup
@mv config.c Modules
@echo "The Makefile was updated, you may need to re-run make."
Modules/Setup: $(srcdir)/Modules/Setup.dist
@if test -f Modules/Setup; then \
echo "-----------------------------------------------"; \
echo "Modules/Setup.dist is newer than Modules/Setup;"; \
echo "check to make sure you have all the updates you"; \
echo "need in your Modules/Setup file."; \
echo "-----------------------------------------------"; \
else cp $(srcdir)/Modules/Setup.dist Modules/Setup; fi
Modules/Setup.local:
@echo "# Edit this file for local setup changes" >Modules/Setup.local
############################################################################
# Special rules for object files
Modules/getbuildinfo.o: $(srcdir)/Modules/getbuildinfo.c buildno
$(CC) -c $(CFLAGS) -DBUILD=`cat buildno` \
$(srcdir)/Modules/getbuildinfo.c \
-o Modules/getbuildinfo.o
Modules/getpath.o: $(srcdir)/Modules/getpath.c Makefile
$(CC) -c $(CFLAGS) -DPYTHONPATH='"$(PYTHONPATH)"' \
-DPREFIX='"$(prefix)"' \
-DEXEC_PREFIX='"$(exec_prefix)"' \
-DVERSION='"$(VERSION)"' \
-DVPATH='"$(VPATH)"' \
$(srcdir)/Modules/getpath.c -o $@
Modules/ccpython.o: Modules/ccpython.cc
$(CXX) $(CFLAGS) -c $< -o $@
$(GRAMMAR_H) $(GRAMMAR_C): $(PGEN) $(GRAMMAR_INPUT)
$(PGEN) $(GRAMMAR_INPUT)
mv graminit.h $(GRAMMAR_H)
mv graminit.c $(GRAMMAR_C)
$(PGEN): $(PGENOBJS)
$(CC) $(OPT) $(PGENOBJS) $(LIBS) -o $(PGEN)
Parser/grammar.o: $(srcdir)/Parser/grammar.c \
$(srcdir)/Parser/assert.h \
$(srcdir)/Include/token.h \
$(srcdir)/Include/grammar.h
Parser/metagrammar.o: $(srcdir)/Parser/metagrammar.c
Python/getplatform.o: $(srcdir)/Python/getplatform.c
$(CC) -c $(CFLAGS) -DPLATFORM='"$(MACHDEP)"' \
-o Python/getplatform.o $(srcdir)/Python/getplatform.c
Python/importdl.o: $(srcdir)/Python/importdl.c
$(CC) -c $(CFLAGS) -I$(DLINCLDIR) \
-o Python/importdl.o $(srcdir)/Python/importdl.c
Objects/unicodectype.o: $(srcdir)/Objects/unicodectype.c \
$(srcdir)/Objects/unicodetype_db.h
############################################################################
# Header files
$(LIBRARY_OBJS) $(MAINOBJ): \
config.h \
Include/Python.h \
Include/patchlevel.h \
Include/pyport.h \
Include/pymem.h \
Include/object.h \
Include/objimpl.h \
Include/pydebug.h \
Include/unicodeobject.h \
Include/intobject.h \
Include/longobject.h \
Include/floatobject.h \
Include/complexobject.h \
Include/rangeobject.h \
Include/stringobject.h \
Include/bufferobject.h \
Include/tupleobject.h \
Include/listobject.h \
Include/dictobject.h \
Include/methodobject.h \
Include/moduleobject.h \
Include/funcobject.h \
Include/classobject.h \
Include/fileobject.h \
Include/cobject.h \
Include/traceback.h \
Include/sliceobject.h \
Include/codecs.h \
Include/pyerrors.h \
Include/pystate.h \
Include/modsupport.h \
Include/ceval.h \
Include/pythonrun.h \
Include/sysmodule.h \
Include/intrcheck.h \
Include/import.h \
Include/abstract.h \
Include/pyfpe.h
######################################################################
# Test the interpreter (twice, once without .pyc files, once with)
TESTOPTS= -l
TESTPROG= $(srcdir)/Lib/test/regrtest.py
TESTPYTHON= ./$(PYTHON) -tt
test: all platform
-rm -f $(srcdir)/Lib/test/*.py[co]
-PYTHONPATH= $(TESTPYTHON) $(TESTPROG) $(TESTOPTS)
PYTHONPATH= $(TESTPYTHON) $(TESTPROG) $(TESTOPTS)
# Install everything
install: altinstall bininstall maninstall
# Install almost everything without disturbing previous versions
altinstall: altbininstall libinstall inclinstall libainstall sharedinstall
# Install shared libraries enabled by Setup
DESTDIRS= $(exec_prefix) $(LIBDIR) $(BINLIBDEST) $(DESTSHARED)
oldsharedinstall: $(DESTSHARED) $(SHAREDMODS)
@for i in X $(SHAREDMODS); do \
if test $$i != X; \
then $(INSTALL_SHARED) $$i $(DESTSHARED)/$$i; \
fi; \
done
$(DESTSHARED):
@for i in $(DESTDIRS); \
do \
if test ! -d $$i; then \
echo "Creating directory $$i"; \
mkdir $$i; \
chmod 755 $$i; \
else true; \
fi; \
done
# Install the interpreter (by creating a hard link to python$(VERSION))
bininstall: altbininstall
-if test -f $(BINDIR)/$(PYTHON); \
then rm -f $(BINDIR)/$(PYTHON); \
else true; \
fi
(cd $(BINDIR); $(LN) python$(VERSION)$(EXEEXT) python$(EXEEXT))
# Install the interpreter with $(VERSION) affixed
# This goes into $(exec_prefix)
altbininstall: $(PYTHON)
@for i in $(BINDIR); \
do \
if test ! -d $$i; then \
echo "Creating directory $$i"; \
mkdir $$i; \
chmod $(DIRMODE) $$i; \
else true; \
fi; \
done
$(INSTALL_PROGRAM) $(PYTHON) $(BINDIR)/python$(VERSION)$(EXEEXT)
if test -f libpython$(VERSION).so; then \
$(INSTALL_DATA) libpython$(VERSION).so $(LIBDIR); \
else true; \
fi
if test -f "$(DLLLIBRARY)"; then \
$(INSTALL_DATA) $(DLLLIBRARY) $(BINDIR); \
else true; \
fi
# Install the manual page
maninstall:
@for i in $(MANDIR) $(MANDIR)/man1; \
do \
if test ! -d $$i; then \
echo "Creating directory $$i"; \
mkdir $$i; \
chmod $(DIRMODE) $$i; \
else true; \
fi; \
done
$(INSTALL_DATA) $(srcdir)/Misc/python.man \
$(MANDIR)/man1/python.1
# Install the library
PLATDIR= plat-$(MACHDEP)
MACHDEPS= $(PLATDIR)
XMLLIBSUBDIRS= xml xml/dom xml/parsers xml/sax
LIBSUBDIRS= lib-old lib-tk site-packages test test/output encodings \
distutils distutils/command $(XMLLIBSUBDIRS) curses $(MACHDEPS)
libinstall: python $(srcdir)/Lib/$(PLATDIR)
@for i in $(SCRIPTDIR) $(LIBDEST); \
do \
if test ! -d $$i; then \
echo "Creating directory $$i"; \
mkdir $$i; \
chmod $(DIRMODE) $$i; \
else true; \
fi; \
done
@for d in $(LIBSUBDIRS); \
do \
a=$(srcdir)/Lib/$$d; \
if test ! -d $$a; then continue; else true; fi; \
b=$(LIBDEST)/$$d; \
if test ! -d $$b; then \
echo "Creating directory $$b"; \
mkdir $$b; \
chmod $(DIRMODE) $$b; \
else true; \
fi; \
done
@for i in $(srcdir)/Lib/*.py $(srcdir)/Lib/*.doc; \
do \
if test -x $$i; then \
$(INSTALL_PROGRAM) $$i $(LIBDEST); \
echo $(INSTALL_PROGRAM) $$i $(LIBDEST); \
else \
$(INSTALL_DATA) $$i $(LIBDEST); \
echo $(INSTALL_DATA) $$i $(LIBDEST); \
fi; \
done
@for d in $(LIBSUBDIRS); \
do \
a=$(srcdir)/Lib/$$d; \
if test ! -d $$a; then continue; else true; fi; \
b=$(LIBDEST)/$$d; \
for i in $$a/*; \
do \
case $$i in \
*CVS) ;; \
*.py[co]) ;; \
*.orig) ;; \
*~) ;; \
*) \
if test -d $$i; then continue; fi; \
if test -x $$i; then \
echo $(INSTALL_PROGRAM) $$i $$b; \
$(INSTALL_PROGRAM) $$i $$b; \
else \
echo $(INSTALL_DATA) $$i $$b; \
$(INSTALL_DATA) $$i $$b; \
fi;; \
esac; \
done; \
done
$(INSTALL_DATA) $(srcdir)/LICENSE $(LIBDEST)/LICENSE.txt
PYTHONPATH=$(LIBDEST) \
./$(PYTHON) -tt $(LIBDEST)/compileall.py $(LIBDEST)
PYTHONPATH=$(LIBDEST) \
./$(PYTHON) -O $(LIBDEST)/compileall.py $(LIBDEST)
# Create the PLATDIR source directory, if one wasn't distributed..
$(srcdir)/Lib/$(PLATDIR):
mkdir $(srcdir)/Lib/$(PLATDIR)
cp $(srcdir)/Lib/plat-generic/regen $(srcdir)/Lib/$(PLATDIR)/regen
export PATH; PATH="`pwd`:$$PATH"; \
export PYTHONPATH; PYTHONPATH="`pwd`/Lib"; \
export EXEEXT; EXEEXT="$(EXEEXT)"; \
cd $(srcdir)/Lib/$(PLATDIR); ./regen
# Install the include files
INCLDIRSTOMAKE=$(INCLUDEDIR) $(CONFINCLUDEDIR) $(INCLUDEPY) $(CONFINCLUDEPY)
inclinstall:
@for i in $(INCLDIRSTOMAKE); \
do \
if test ! -d $$i; then \
echo "Creating directory $$i"; \
mkdir $$i; \
chmod $(DIRMODE) $$i; \
else true; \
fi; \
done
@for i in $(srcdir)/Include/*.h; \
do \
echo $(INSTALL_DATA) $$i $(INCLUDEPY); \
$(INSTALL_DATA) $$i $(INCLUDEPY); \
done
$(INSTALL_DATA) config.h $(CONFINCLUDEPY)/config.h
# Install the library and miscellaneous stuff needed for extending/embedding
# This goes into $(exec_prefix)
LIBPL= $(LIBP)/config
libainstall: all
@for i in $(LIBDIR) $(LIBP) $(LIBPL); \
do \
if test ! -d $$i; then \
echo "Creating directory $$i"; \
mkdir $$i; \
chmod $(DIRMODE) $$i; \
else true; \
fi; \
done
@if test -d $(LDLIBRARY); then :; else \
$(INSTALL_DATA) $(LDLIBRARY) $(LIBPL)/$(LDLIBRARY) ; \
$(RANLIB) $(LIBPL)/$(LDLIBRARY) ; \
fi
$(INSTALL_DATA) Modules/config.c $(LIBPL)/config.c
$(INSTALL_DATA) Modules/python.o $(LIBPL)/python.o
$(INSTALL_DATA) $(srcdir)/Modules/config.c.in $(LIBPL)/config.c.in
$(INSTALL_DATA) Makefile $(LIBPL)/Makefile
$(INSTALL_DATA) Modules/Setup $(LIBPL)/Setup
$(INSTALL_DATA) Modules/Setup.local $(LIBPL)/Setup.local
$(INSTALL_DATA) Modules/Setup.config $(LIBPL)/Setup.config
$(INSTALL_PROGRAM) $(srcdir)/Modules/makesetup $(LIBPL)/makesetup
$(INSTALL_PROGRAM) $(srcdir)/install-sh $(LIBPL)/install-sh
$(INSTALL_DATA) $(srcdir)/Misc/Makefile.pre.in $(LIBPL)/Makefile.pre.in
@if [ -s Modules/python.exp -a \
"`echo $(MACHDEP) | sed 's/^\(...\).*/\1/'`" = "aix" ]; then \
echo; echo "Installing support files for building shared extension modules on AIX:"; \
$(INSTALL_DATA) Modules/python.exp \
$(LIBPL)/python.exp; \
echo; echo "$(LIBPL)/python.exp"; \
$(INSTALL_PROGRAM) $(srcdir)/Modules/makexp_aix \
$(LIBPL)/makexp_aix; \
echo "$(LIBPL)/makexp_aix"; \
$(INSTALL_PROGRAM) $(srcdir)/Modules/ld_so_aix \
$(LIBPL)/ld_so_aix; \
echo "$(LIBPL)/ld_so_aix"; \
echo; echo "See Misc/AIX-NOTES for details."; \
else true; \
fi
@case "$(MACHDEP)" in beos*) \
echo; echo "Installing support files for building shared extension modules on BeOS:"; \
$(INSTALL_DATA) BeOS/README $(LIBPL)/README; \
echo; echo "$(LIBPL)/README"; \
$(INSTALL_DATA) BeOS/README.readline-2.2 $(LIBPL)/README.readline-2.2; \
echo "$(LIBPL)/README.readline-2.2"; \
$(INSTALL_PROGRAM) BeOS/ar-fake $(LIBPL)/ar-fake; \
echo "$(LIBPL)/ar-fake"; \
$(INSTALL_PROGRAM) BeOS/linkmodule $(LIBPL)/linkmodule; \
echo "$(LIBPL)/linkmodule"; \
echo; echo "See BeOS/README for details."; \
;; \
esac
# Install the dynamically loadable modules
# This goes into $(exec_prefix)
sharedinstall:
./$(PYTHON) $(srcdir)/setup.py install
# Build the toplevel Makefile
Makefile.pre: Makefile.pre.in config.status
CONFIG_FILES=Makefile.pre CONFIG_HEADERS= $(SHELL) config.status
$(MAKE) -f Makefile.pre Makefile
# Run the configure script. If config.status already exists,
# call it with the --recheck argument, which reruns configure with the
# same options as it was run last time; otherwise run the configure
# script with options taken from the $(WITH) variable
config.status: $(srcdir)/configure
if test -f config.status; \
then $(SHELL) config.status --recheck; \
$(SHELL) config.status; \
else $(SHELL) $(srcdir)/configure $(WITH); \
fi
.PRECIOUS: config.status $(PYTHON) Makefile Makefile.pre
# Some make's put the object file in the current directory
.c.o:
$(CC) -c $(CFLAGS) $(CPPFLAGS) -o $@ $<
# Rerun configure with the same options as it was run last time,
# provided the config.status script exists
recheck:
$(SHELL) config.status --recheck
$(SHELL) config.status
# Rebuild the configure script from configure.in; also rebuild config.h.in
autoconf:
(cd $(srcdir); autoconf)
(cd $(srcdir); autoheader)
# Create a tags file for vi
tags::
cd $(srcdir); \
ctags -w -t Include/*.h; \
for i in $(SRCDIRS); do ctags -w -t -a $$i/*.[ch]; \
done; \
sort tags -o tags
# Create a tags file for GNU Emacs
TAGS::
cd $(srcdir); \
etags Include/*.h; \
for i in $(SRCDIRS); do etags -a $$i/*.[ch]; done
# Sanitation targets -- clean leaves libraries, executables and tags
# files, which clobber removes those as well
clean:
-rm -f core *~ [@,#]* *.old *.orig *.rej
-rm -rf build
# avoid long command lines, same as LIBRARY_OBJS MAINOBJ PGOBJS
-rm -f $(PARSER_OBJS)
-rm -f $(OBJECT_OBJS)
-rm -f $(PYTHON_OBJS)
-rm -f $(MODULE_OBJS) $(SIGNAL_OBJS)
-rm -f $(MODOBJS) $(MAINOBJ) $(PGOBJS)
clobber: clean
-rm -f tags TAGS $(PYTHON) $(LIBRARY) $(LDLIBRARY) $(DLLLIBRARY)
-rm -f Makefile.pre config.log config.cache config.h setup.cfg
-rm -f Modules/*.so Modules/*.sl
# Make things extra clean, before making a distribution:
# remove all generated files, even Makefile[.pre]
distclean: clobber
-$(MAKE) -f $(srcdir)/Makefile.pre.in \
SUBDIRS="$(SUBDIRSTOO)" clobber
-rm -f config.status config.log config.cache config.h Makefile
-rm -f buildno Modules/Setup Modules/Setup.local Modules/Setup.config
-rm -f Modules/config.c
-for i in $(SUBDIRSTOO); do \
for f in $$i/*.in; do \
f=`basename "$$f" .in`; \
if test "$$f" != "*"; then \
echo rm -f "$$i/$$f"; \
rm -f "$$i/$$f"; \
fi; \
done; \
done
# Check for smelly exported symbols (not starting with Py/_Py)
smelly: all
nm -p $(LIBRARY) | \
sed -n "/ [TDB] /s/.* //p" | grep -v "^_*Py" | sort -u; \
# Find files with funny names
funny:
find $(DISTDIRS) -type d \
-o -name '*.[chs]' \
-o -name '*.py' \
-o -name '*.doc' \
-o -name '*.sty' \
-o -name '*.bib' \
-o -name '*.dat' \
-o -name '*.el' \
-o -name '*.fd' \
-o -name '*.in' \
-o -name '*.tex' \
-o -name '*,[vpt]' \
-o -name 'Setup' \
-o -name 'Setup.*' \
-o -name README \
-o -name Makefile \
-o -name ChangeLog \
-o -name Repository \
-o -name Root \
-o -name Entries \
-o -name Tag \
-o -name tags \
-o -name TAGS \
-o -name .cvsignore \
-o -name MANIFEST \
-o -print
# IF YOU PUT ANYTHING HERE IT WILL GO AWAY