[Python-checkins] r80715 - in python/branches/release31-maint: Doc/c-api/arg.rst
antoine.pitrou
python-checkins at python.org
Mon May 3 18:07:57 CEST 2010
Author: antoine.pitrou
Date: Mon May 3 18:07:56 2010
New Revision: 80715
Log:
Merged revisions 80714 via svnmerge from
svn+ssh://pythondev@svn.python.org/python/branches/py3k
........
r80714 | antoine.pitrou | 2010-05-03 17:57:23 +0200 (lun., 03 mai 2010) | 3 lines
Issue #8593: Fix, reorder and improve the documentation for argument parsing
........
Modified:
python/branches/release31-maint/ (props changed)
python/branches/release31-maint/Doc/c-api/arg.rst
Modified: python/branches/release31-maint/Doc/c-api/arg.rst
==============================================================================
--- python/branches/release31-maint/Doc/c-api/arg.rst (original)
+++ python/branches/release31-maint/Doc/c-api/arg.rst Mon May 3 18:07:56 2010
@@ -14,6 +14,10 @@
strings* which are used to tell the function about the expected arguments. The
format strings use the same syntax for each of these functions.
+-----------------
+Parsing arguments
+-----------------
+
A format string consists of zero or more "format units." A format unit
describes one Python object; it is usually a single character or a parenthesized
sequence of format units. With a few exceptions, a format unit that is not a
@@ -23,75 +27,108 @@
the format unit; and the entry in [square] brackets is the type of the C
variable(s) whose address should be passed.
-``s`` (string or Unicode object) [const char \*]
- Convert a Python string or Unicode object to a C pointer to a character string.
- You must not provide storage for the string itself; a pointer to an existing
- string is stored into the character pointer variable whose address you pass.
- The C string is NUL-terminated. The Python string must not contain embedded NUL
- bytes; if it does, a :exc:`TypeError` exception is raised. Unicode objects are
- converted to C strings using the default encoding. If this conversion fails, a
- :exc:`UnicodeError` is raised.
-
- Starting with Python 2.5 the type of the length argument can be
- controlled by defining the macro :cmacro:`PY_SSIZE_T_CLEAN` before
- including :file:`Python.h`. If the macro is defined, length is a
- :ctype:`Py_ssize_t` rather than an int.
-
-``s*`` (string, Unicode, or any buffer compatible object) [Py_buffer]
- This is similar to ``s``, but the code fills a :ctype:`Py_buffer` structure
- provided by the caller. In this case the Python string may contain embedded
- null bytes. Unicode objects pass back a pointer to the default encoded
- string version of the object if such a conversion is possible. The
- underlying buffer is locked, so that the caller can subsequently use the
- buffer even inside a ``Py_BEGIN_ALLOW_THREADS`` block. **The caller is
- responsible** for calling ``PyBuffer_Release`` with the structure after it
- has processed the data.
-
-``s#`` (string, Unicode or any read buffer compatible object) [const char \*, int or :ctype:`Py_ssize_t`]
- This variant on ``s`` stores into two C variables, the first one a pointer to
- a character string, the second one its length. In this case the Python
- string may contain embedded null bytes. Unicode objects pass back a pointer
- to the default encoded string version of the object if such a conversion is
- possible. All other read-buffer compatible objects pass back a reference to
- the raw internal data representation. Since this format doesn't allow
- writable buffer compatible objects like byte arrays, ``s*`` is to be
- preferred.
+Strings and buffers
+-------------------
- The type of the length argument (int or :ctype:`Py_ssize_t`) is controlled by
+These formats do not expect you to provide raw storage for the returned string
+or bytes. Also, you won't have to release any memory yourself, except with
+the ``es``, ``es#``, ``et`` and ``et#`` formats.
+
+However, when a :ctype:`Py_buffer` structure gets filled, the underlying
+buffer is locked so that the caller can subsequently use the buffer even
+inside a ``Py_BEGIN_ALLOW_THREADS`` block without the risk of mutable data
+being resized or destroyed. As a result, **you have to call**
+:cfunc:`PyBuffer_Release` after you have finished processing the data (or
+in any early abort case).
+
+Unless otherwise stated, buffers are not NUL-terminated.
+
+.. note::
+ For all ``#`` variants of formats (``s#``, ``y#``, etc.), the type of
+ the length argument (int or :ctype:`Py_ssize_t`) is controlled by
defining the macro :cmacro:`PY_SSIZE_T_CLEAN` before including
- :file:`Python.h`. If the macro was defined, length is a :ctype:`Py_ssize_t`
- rather than an int. This behavior will change in a future Python version to
- only support :ctype:`Py_ssize_t` and drop int support. It is best to always
- define :cmacro:`PY_SSIZE_T_CLEAN`.
+ :file:`Python.h`. If the macro was defined, length is a
+ :ctype:`Py_ssize_t` rather than an int. This behavior will change
+ in a future Python version to only support :ctype:`Py_ssize_t` and
+ drop int support. It is best to always define :cmacro:`PY_SSIZE_T_CLEAN`.
-``y`` (bytes object) [const char \*]
- This variant on ``s`` converts a Python bytes or bytearray object to a C
- pointer to a character string. The bytes object must not contain embedded
- NUL bytes; if it does, a :exc:`TypeError` exception is raised.
-``y*`` (bytes object) [Py_buffer \*]
- This is to ``s*`` as ``y`` is to ``s``.
+``s`` (Unicode object) [const char \*]
+ Convert a Unicode object to a C pointer to a character string.
+ A pointer to an existing string is stored in the character pointer
+ variable whose address you pass. The C string is NUL-terminated.
+ The Python string must not contain embedded NUL bytes; if it does,
+ a :exc:`TypeError` exception is raised. Unicode objects are converted
+ to C strings using the default encoding. If this conversion fails, a
+ :exc:`UnicodeError` is raised.
+
+ .. note::
+ This format does not accept bytes-like objects. If you want to accept
+ filesystem paths and convert them to C character strings, it is
+ preferrable to use the ``O&`` format with :cfunc:`PyUnicode_FSConverter`
+ as *converter*.
+
+``s*`` (Unicode object or any buffer compatible object) [Py_buffer]
+ This format accepts Unicode objects as well as objects supporting the
+ buffer protocol (such as :class:`bytes` or :class:`bytearray` objects).
+ It fills a :ctype:`Py_buffer` structure provided by the caller.
+ Unicode objects are converted to C strings using the default encoding.
+ In this case the resulting C string may contain embedded NUL bytes.
-``y#`` (bytes object) [const char \*, int]
- This variant on ``s#`` stores into two C variables, the first one a pointer
- to a character string, the second one its length. This only accepts bytes
- objects, no byte arrays.
+``s#`` (string, Unicode or any read buffer compatible object) [const char \*, int or :ctype:`Py_ssize_t`]
+ Like ``s*``, except that it doesn't accept mutable buffer-like objects
+ such as :class:`bytearray`. The result is stored into two C variables,
+ the first one a pointer to a C string, the second one its length.
+ The string may contain embedded null bytes.
-``z`` (string or ``None``) [const char \*]
+``z`` (Unicode object or ``None``) [const char \*]
Like ``s``, but the Python object may also be ``None``, in which case the C
pointer is set to *NULL*.
-``z*`` (string or ``None`` or any buffer compatible object) [Py_buffer]
- This is to ``s*`` as ``z`` is to ``s``.
+``z*`` (Unicode object or ``None`` or any buffer compatible object) [Py_buffer]
+ Like ``s*``, but the Python object may also be ``None``, in which case the
+ ``buf`` member of the :ctype:`Py_buffer` structure is set to *NULL*.
-``z#`` (string or ``None`` or any read buffer compatible object) [const char \*, int]
- This is to ``s#`` as ``z`` is to ``s``.
+``z#`` (Unicode object or ``None`` or any read buffer compatible object) [const char \*, int]
+ Like ``s#``, but the Python object may also be ``None``, in which case the C
+ pointer is set to *NULL*.
+
+``y`` (bytes object) [const char \*]
+ This format converts a bytes-like object to a C pointer to a character
+ string; it does not accept Unicode objects. The bytes buffer must not
+ contain embedded NUL bytes; if it does, a :exc:`TypeError`
+ exception is raised.
+
+``y*`` (any buffer compatible object) [Py_buffer \*]
+ This variant on ``s*`` doesn't accept Unicode objects, only objects
+ supporting the buffer protocol. **This is the recommended way to accept
+ binary data.**
+
+``y#`` (bytes object) [const char \*, int]
+ This variant on ``s#`` doesn't accept Unicode objects, only bytes-like
+ objects.
+
+``S`` (bytes object) [PyBytesObject \*]
+ Requires that the Python object is a :class:`bytes` object, without
+ attempting any conversion. Raises :exc:`TypeError` if the object is not
+ a bytes object. The C variable may also be declared as :ctype:`PyObject\*`.
+
+``Y`` (bytearray object) [PyByteArrayObject \*]
+ Requires that the Python object is a :class:`bytearray` object, without
+ attempting any conversion. Raises :exc:`TypeError` if the object is not
+ a bytearray object. The C variable may also be declared as :ctype:`PyObject\*`.
``u`` (Unicode object) [Py_UNICODE \*]
Convert a Python Unicode object to a C pointer to a NUL-terminated buffer of
- 16-bit Unicode (UTF-16) data. As with ``s``, there is no need to provide
- storage for the Unicode data buffer; a pointer to the existing Unicode data is
- stored into the :ctype:`Py_UNICODE` pointer variable whose address you pass.
+ Unicode characters. You must pass the address of a :ctype:`Py_UNICODE`
+ pointer variable, which will be filled with the pointer to an existing
+ Unicode buffer. Please note that the width of a :ctype:`Py_UNICODE`
+ character depends on compilation options (it is either 16 or 32 bits).
+
+ ..note ::
+ Since ``u`` doesn't give you back the length of the string, and it
+ may contain embedded NUL characters, it is recommended to use ``u#``
+ or ``U`` instead.
``u#`` (Unicode object) [Py_UNICODE \*, int]
This variant on ``u`` stores into two C variables, the first one a pointer to a
@@ -100,11 +137,40 @@
array.
``Z`` (Unicode or ``None``) [Py_UNICODE \*]
- Like ``s``, but the Python object may also be ``None``, in which case the C
- pointer is set to *NULL*.
+ Like ``u``, but the Python object may also be ``None``, in which case the
+ :ctype:`Py_UNICODE` pointer is set to *NULL*.
``Z#`` (Unicode or ``None``) [Py_UNICODE \*, int]
- This is to ``u#`` as ``Z`` is to ``u``.
+ Like ``u#``, but the Python object may also be ``None``, in which case the
+ :ctype:`Py_UNICODE` pointer is set to *NULL*.
+
+``U`` (Unicode object) [PyUnicodeObject \*]
+ Requires that the Python object is a Unicode object, without attempting
+ any conversion. Raises :exc:`TypeError` if the object is not a Unicode
+ object. The C variable may also be declared as :ctype:`PyObject\*`.
+
+``t#`` (read-only character buffer) [char \*, int]
+ Like ``s#``, but accepts any object which implements the read-only buffer
+ interface. The :ctype:`char\*` variable is set to point to the first byte of
+ the buffer, and the :ctype:`int` is set to the length of the buffer. Only
+ single-segment buffer objects are accepted; :exc:`TypeError` is raised for all
+ others.
+
+``w`` (read-write character buffer) [char \*]
+ Similar to ``s``, but accepts any object which implements the read-write buffer
+ interface. The caller must determine the length of the buffer by other means,
+ or use ``w#`` instead. Only single-segment buffer objects are accepted;
+ :exc:`TypeError` is raised for all others.
+
+``w*`` (read-write byte-oriented buffer) [Py_buffer]
+ This is to ``w`` what ``s*`` is to ``s``.
+
+``w#`` (read-write character buffer) [char \*, int]
+ Like ``s#``, but accepts any object which implements the read-write buffer
+ interface. The :ctype:`char \*` variable is set to point to the first byte
+ of the buffer, and the :ctype:`int` is set to the length of the buffer.
+ Only single-segment buffer objects are accepted; :exc:`TypeError` is raised
+ for all others.
``es`` (string, Unicode object or character buffer compatible object) [const char \*encoding, char \*\*buffer]
This variant on ``s`` is used for encoding Unicode and objects convertible to
@@ -165,6 +231,9 @@
them. Instead, the implementation assumes that the string object uses the
encoding passed in as parameter.
+Numbers
+-------
+
``b`` (integer) [unsigned char]
Convert a nonnegative Python integer to an unsigned tiny int, stored in a C
:ctype:`unsigned char`.
@@ -207,13 +276,13 @@
``n`` (integer) [Py_ssize_t]
Convert a Python integer to a C :ctype:`Py_ssize_t`.
-``c`` (string of length 1) [char]
- Convert a Python character, represented as a byte string of length 1, to a C
- :ctype:`char`.
-
-``C`` (string of length 1) [int]
- Convert a Python character, represented as a unicode string of length 1, to a
- C :ctype:`int`.
+``c`` (bytes object of length 1) [char]
+ Convert a Python byte, represented as a :class:`bytes` object of length 1,
+ to a C :ctype:`char`.
+
+``C`` (Unicode object of length 1) [int]
+ Convert a Python character, represented as a :class:`str`: object of
+ length 1, to a C :ctype:`int`.
``f`` (float) [float]
Convert a Python floating point number to a C :ctype:`float`.
@@ -224,6 +293,9 @@
``D`` (complex) [Py_complex]
Convert a Python complex number to a C :ctype:`Py_complex` structure.
+Other objects
+-------------
+
``O`` (object) [PyObject \*]
Store a Python object (without any conversion) in a C object pointer. The C
program thus receives the actual object that was passed. The object's reference
@@ -258,39 +330,6 @@
.. versionchanged:: 3.1
Py_CLEANUP_SUPPORTED was added.
-``S`` (string) [PyStringObject \*]
- Like ``O`` but requires that the Python object is a string object. Raises
- :exc:`TypeError` if the object is not a string object. The C variable may also
- be declared as :ctype:`PyObject\*`.
-
-``U`` (Unicode string) [PyUnicodeObject \*]
- Like ``O`` but requires that the Python object is a Unicode object. Raises
- :exc:`TypeError` if the object is not a Unicode object. The C variable may also
- be declared as :ctype:`PyObject\*`.
-
-``t#`` (read-only character buffer) [char \*, int]
- Like ``s#``, but accepts any object which implements the read-only buffer
- interface. The :ctype:`char\*` variable is set to point to the first byte of
- the buffer, and the :ctype:`int` is set to the length of the buffer. Only
- single-segment buffer objects are accepted; :exc:`TypeError` is raised for all
- others.
-
-``w`` (read-write character buffer) [char \*]
- Similar to ``s``, but accepts any object which implements the read-write buffer
- interface. The caller must determine the length of the buffer by other means,
- or use ``w#`` instead. Only single-segment buffer objects are accepted;
- :exc:`TypeError` is raised for all others.
-
-``w*`` (read-write byte-oriented buffer) [Py_buffer]
- This is to ``w`` what ``s*`` is to ``s``.
-
-``w#`` (read-write character buffer) [char \*, int]
- Like ``s#``, but accepts any object which implements the read-write buffer
- interface. The :ctype:`char \*` variable is set to point to the first byte
- of the buffer, and the :ctype:`int` is set to the length of the buffer.
- Only single-segment buffer objects are accepted; :exc:`TypeError` is raised
- for all others.
-
``(items)`` (tuple) [*matching-items*]
The object must be a Python sequence whose length is the number of format units
in *items*. The C arguments must correspond to the individual format units in
@@ -339,6 +378,8 @@
of the format units, the variables at the addresses corresponding to that
and the following format units are left untouched.
+API Functions
+-------------
.. cfunction:: int PyArg_ParseTuple(PyObject *args, const char *format, ...)
@@ -415,6 +456,10 @@
PyArg_ParseTuple(args, "O|O:ref", &object, &callback)
+---------------
+Building values
+---------------
+
.. cfunction:: PyObject* Py_BuildValue(const char *format, ...)
Create a new value based on a format string similar to those accepted by the
More information about the Python-checkins
mailing list