[Python-checkins] r80792 - in python/branches/release31-maint: Modules/_ssl.c
antoine.pitrou
python-checkins at python.org
Wed May 5 18:01:14 CEST 2010
Author: antoine.pitrou
Date: Wed May 5 18:01:14 2010
New Revision: 80792
Log:
Merged revisions 80790 via svnmerge from
svn+ssh://pythondev@svn.python.org/python/branches/py3k
................
r80790 | antoine.pitrou | 2010-05-05 17:57:33 +0200 (mer., 05 mai 2010) | 9 lines
Merged revisions 80789 via svnmerge from
svn+ssh://pythondev@svn.python.org/python/trunk
........
r80789 | antoine.pitrou | 2010-05-05 17:53:45 +0200 (mer., 05 mai 2010) | 3 lines
Untabify Modules/_ssl.c
........
................
Modified:
python/branches/release31-maint/ (props changed)
python/branches/release31-maint/Modules/_ssl.c
Modified: python/branches/release31-maint/Modules/_ssl.c
==============================================================================
--- python/branches/release31-maint/Modules/_ssl.c (original)
+++ python/branches/release31-maint/Modules/_ssl.c Wed May 5 18:01:14 2010
@@ -19,14 +19,14 @@
#ifdef WITH_THREAD
#include "pythread.h"
#define PySSL_BEGIN_ALLOW_THREADS { \
- PyThreadState *_save = NULL; \
- if (_ssl_locks_count>0) {_save = PyEval_SaveThread();}
-#define PySSL_BLOCK_THREADS if (_ssl_locks_count>0){PyEval_RestoreThread(_save)};
-#define PySSL_UNBLOCK_THREADS if (_ssl_locks_count>0){_save = PyEval_SaveThread()};
-#define PySSL_END_ALLOW_THREADS if (_ssl_locks_count>0){PyEval_RestoreThread(_save);} \
- }
+ PyThreadState *_save = NULL; \
+ if (_ssl_locks_count>0) {_save = PyEval_SaveThread();}
+#define PySSL_BLOCK_THREADS if (_ssl_locks_count>0){PyEval_RestoreThread(_save)};
+#define PySSL_UNBLOCK_THREADS if (_ssl_locks_count>0){_save = PyEval_SaveThread()};
+#define PySSL_END_ALLOW_THREADS if (_ssl_locks_count>0){PyEval_RestoreThread(_save);} \
+ }
-#else /* no WITH_THREAD */
+#else /* no WITH_THREAD */
#define PySSL_BEGIN_ALLOW_THREADS
#define PySSL_BLOCK_THREADS
@@ -36,37 +36,37 @@
#endif
enum py_ssl_error {
- /* these mirror ssl.h */
- PY_SSL_ERROR_NONE,
- PY_SSL_ERROR_SSL,
- PY_SSL_ERROR_WANT_READ,
- PY_SSL_ERROR_WANT_WRITE,
- PY_SSL_ERROR_WANT_X509_LOOKUP,
- PY_SSL_ERROR_SYSCALL, /* look at error stack/return value/errno */
- PY_SSL_ERROR_ZERO_RETURN,
- PY_SSL_ERROR_WANT_CONNECT,
- /* start of non ssl.h errorcodes */
- PY_SSL_ERROR_EOF, /* special case of SSL_ERROR_SYSCALL */
- PY_SSL_ERROR_NO_SOCKET, /* socket has been GC'd */
- PY_SSL_ERROR_INVALID_ERROR_CODE
+ /* these mirror ssl.h */
+ PY_SSL_ERROR_NONE,
+ PY_SSL_ERROR_SSL,
+ PY_SSL_ERROR_WANT_READ,
+ PY_SSL_ERROR_WANT_WRITE,
+ PY_SSL_ERROR_WANT_X509_LOOKUP,
+ PY_SSL_ERROR_SYSCALL, /* look at error stack/return value/errno */
+ PY_SSL_ERROR_ZERO_RETURN,
+ PY_SSL_ERROR_WANT_CONNECT,
+ /* start of non ssl.h errorcodes */
+ PY_SSL_ERROR_EOF, /* special case of SSL_ERROR_SYSCALL */
+ PY_SSL_ERROR_NO_SOCKET, /* socket has been GC'd */
+ PY_SSL_ERROR_INVALID_ERROR_CODE
};
enum py_ssl_server_or_client {
- PY_SSL_CLIENT,
- PY_SSL_SERVER
+ PY_SSL_CLIENT,
+ PY_SSL_SERVER
};
enum py_ssl_cert_requirements {
- PY_SSL_CERT_NONE,
- PY_SSL_CERT_OPTIONAL,
- PY_SSL_CERT_REQUIRED
+ PY_SSL_CERT_NONE,
+ PY_SSL_CERT_OPTIONAL,
+ PY_SSL_CERT_REQUIRED
};
enum py_ssl_version {
- PY_SSL_VERSION_SSL2,
- PY_SSL_VERSION_SSL3,
- PY_SSL_VERSION_SSL23,
- PY_SSL_VERSION_TLS1
+ PY_SSL_VERSION_SSL2,
+ PY_SSL_VERSION_SSL3,
+ PY_SSL_VERSION_SSL23,
+ PY_SSL_VERSION_TLS1
};
/* Include symbols from _socket module */
@@ -114,12 +114,12 @@
#endif
typedef struct {
- PyObject_HEAD
- PyObject *Socket; /* weakref to socket on which we're layered */
- SSL_CTX* ctx;
- SSL* ssl;
- X509* peer_cert;
- int shutdown_seen_zero;
+ PyObject_HEAD
+ PyObject *Socket; /* weakref to socket on which we're layered */
+ SSL_CTX* ctx;
+ SSL* ssl;
+ X509* peer_cert;
+ int shutdown_seen_zero;
} PySSLObject;
@@ -127,19 +127,19 @@
static PyObject *PySSL_SSLwrite(PySSLObject *self, PyObject *args);
static PyObject *PySSL_SSLread(PySSLObject *self, PyObject *args);
static int check_socket_and_wait_for_timeout(PySocketSockObject *s,
- int writing);
+ int writing);
static PyObject *PySSL_peercert(PySSLObject *self, PyObject *args);
static PyObject *PySSL_cipher(PySSLObject *self);
-#define PySSLObject_Check(v) (Py_TYPE(v) == &PySSL_Type)
+#define PySSLObject_Check(v) (Py_TYPE(v) == &PySSL_Type)
typedef enum {
- SOCKET_IS_NONBLOCKING,
- SOCKET_IS_BLOCKING,
- SOCKET_HAS_TIMED_OUT,
- SOCKET_HAS_BEEN_CLOSED,
- SOCKET_TOO_LARGE_FOR_SELECT,
- SOCKET_OPERATION_OK
+ SOCKET_IS_NONBLOCKING,
+ SOCKET_IS_BLOCKING,
+ SOCKET_HAS_TIMED_OUT,
+ SOCKET_HAS_BEEN_CLOSED,
+ SOCKET_TOO_LARGE_FOR_SELECT,
+ SOCKET_OPERATION_OK
} timeout_state;
/* Wrap error strings with filename and line # */
@@ -156,283 +156,283 @@
static PyObject *
PySSL_SetError(PySSLObject *obj, int ret, char *filename, int lineno)
{
- PyObject *v;
- char buf[2048];
- char *errstr;
- int err;
- enum py_ssl_error p = PY_SSL_ERROR_NONE;
-
- assert(ret <= 0);
-
- if (obj->ssl != NULL) {
- err = SSL_get_error(obj->ssl, ret);
-
- switch (err) {
- case SSL_ERROR_ZERO_RETURN:
- errstr = "TLS/SSL connection has been closed";
- p = PY_SSL_ERROR_ZERO_RETURN;
- break;
- case SSL_ERROR_WANT_READ:
- errstr = "The operation did not complete (read)";
- p = PY_SSL_ERROR_WANT_READ;
- break;
- case SSL_ERROR_WANT_WRITE:
- p = PY_SSL_ERROR_WANT_WRITE;
- errstr = "The operation did not complete (write)";
- break;
- case SSL_ERROR_WANT_X509_LOOKUP:
- p = PY_SSL_ERROR_WANT_X509_LOOKUP;
- errstr =
- "The operation did not complete (X509 lookup)";
- break;
- case SSL_ERROR_WANT_CONNECT:
- p = PY_SSL_ERROR_WANT_CONNECT;
- errstr = "The operation did not complete (connect)";
- break;
- case SSL_ERROR_SYSCALL:
- {
- unsigned long e = ERR_get_error();
- if (e == 0) {
- PySocketSockObject *s
- = (PySocketSockObject *) PyWeakref_GetObject(obj->Socket);
- if (ret == 0 || (((PyObject *)s) == Py_None)) {
- p = PY_SSL_ERROR_EOF;
- errstr =
- "EOF occurred in violation of protocol";
- } else if (ret == -1) {
- /* underlying BIO reported an I/O error */
- return s->errorhandler();
- } else { /* possible? */
- p = PY_SSL_ERROR_SYSCALL;
- errstr = "Some I/O error occurred";
- }
- } else {
- p = PY_SSL_ERROR_SYSCALL;
- /* XXX Protected by global interpreter lock */
- errstr = ERR_error_string(e, NULL);
- }
- break;
- }
- case SSL_ERROR_SSL:
- {
- unsigned long e = ERR_get_error();
- p = PY_SSL_ERROR_SSL;
- if (e != 0)
- /* XXX Protected by global interpreter lock */
- errstr = ERR_error_string(e, NULL);
- else { /* possible? */
- errstr =
- "A failure in the SSL library occurred";
- }
- break;
- }
- default:
- p = PY_SSL_ERROR_INVALID_ERROR_CODE;
- errstr = "Invalid error code";
- }
- } else {
- errstr = ERR_error_string(ERR_peek_last_error(), NULL);
- }
- PyOS_snprintf(buf, sizeof(buf), "_ssl.c:%d: %s", lineno, errstr);
- v = Py_BuildValue("(is)", p, buf);
- if (v != NULL) {
- PyErr_SetObject(PySSLErrorObject, v);
- Py_DECREF(v);
- }
- return NULL;
+ PyObject *v;
+ char buf[2048];
+ char *errstr;
+ int err;
+ enum py_ssl_error p = PY_SSL_ERROR_NONE;
+
+ assert(ret <= 0);
+
+ if (obj->ssl != NULL) {
+ err = SSL_get_error(obj->ssl, ret);
+
+ switch (err) {
+ case SSL_ERROR_ZERO_RETURN:
+ errstr = "TLS/SSL connection has been closed";
+ p = PY_SSL_ERROR_ZERO_RETURN;
+ break;
+ case SSL_ERROR_WANT_READ:
+ errstr = "The operation did not complete (read)";
+ p = PY_SSL_ERROR_WANT_READ;
+ break;
+ case SSL_ERROR_WANT_WRITE:
+ p = PY_SSL_ERROR_WANT_WRITE;
+ errstr = "The operation did not complete (write)";
+ break;
+ case SSL_ERROR_WANT_X509_LOOKUP:
+ p = PY_SSL_ERROR_WANT_X509_LOOKUP;
+ errstr =
+ "The operation did not complete (X509 lookup)";
+ break;
+ case SSL_ERROR_WANT_CONNECT:
+ p = PY_SSL_ERROR_WANT_CONNECT;
+ errstr = "The operation did not complete (connect)";
+ break;
+ case SSL_ERROR_SYSCALL:
+ {
+ unsigned long e = ERR_get_error();
+ if (e == 0) {
+ PySocketSockObject *s
+ = (PySocketSockObject *) PyWeakref_GetObject(obj->Socket);
+ if (ret == 0 || (((PyObject *)s) == Py_None)) {
+ p = PY_SSL_ERROR_EOF;
+ errstr =
+ "EOF occurred in violation of protocol";
+ } else if (ret == -1) {
+ /* underlying BIO reported an I/O error */
+ return s->errorhandler();
+ } else { /* possible? */
+ p = PY_SSL_ERROR_SYSCALL;
+ errstr = "Some I/O error occurred";
+ }
+ } else {
+ p = PY_SSL_ERROR_SYSCALL;
+ /* XXX Protected by global interpreter lock */
+ errstr = ERR_error_string(e, NULL);
+ }
+ break;
+ }
+ case SSL_ERROR_SSL:
+ {
+ unsigned long e = ERR_get_error();
+ p = PY_SSL_ERROR_SSL;
+ if (e != 0)
+ /* XXX Protected by global interpreter lock */
+ errstr = ERR_error_string(e, NULL);
+ else { /* possible? */
+ errstr =
+ "A failure in the SSL library occurred";
+ }
+ break;
+ }
+ default:
+ p = PY_SSL_ERROR_INVALID_ERROR_CODE;
+ errstr = "Invalid error code";
+ }
+ } else {
+ errstr = ERR_error_string(ERR_peek_last_error(), NULL);
+ }
+ PyOS_snprintf(buf, sizeof(buf), "_ssl.c:%d: %s", lineno, errstr);
+ v = Py_BuildValue("(is)", p, buf);
+ if (v != NULL) {
+ PyErr_SetObject(PySSLErrorObject, v);
+ Py_DECREF(v);
+ }
+ return NULL;
}
static PyObject *
_setSSLError (char *errstr, int errcode, char *filename, int lineno) {
- char buf[2048];
- PyObject *v;
+ char buf[2048];
+ PyObject *v;
- if (errstr == NULL) {
- errcode = ERR_peek_last_error();
- errstr = ERR_error_string(errcode, NULL);
- }
- PyOS_snprintf(buf, sizeof(buf), "_ssl.c:%d: %s", lineno, errstr);
- v = Py_BuildValue("(is)", errcode, buf);
- if (v != NULL) {
- PyErr_SetObject(PySSLErrorObject, v);
- Py_DECREF(v);
- }
- return NULL;
+ if (errstr == NULL) {
+ errcode = ERR_peek_last_error();
+ errstr = ERR_error_string(errcode, NULL);
+ }
+ PyOS_snprintf(buf, sizeof(buf), "_ssl.c:%d: %s", lineno, errstr);
+ v = Py_BuildValue("(is)", errcode, buf);
+ if (v != NULL) {
+ PyErr_SetObject(PySSLErrorObject, v);
+ Py_DECREF(v);
+ }
+ return NULL;
}
static PySSLObject *
newPySSLObject(PySocketSockObject *Sock, char *key_file, char *cert_file,
- enum py_ssl_server_or_client socket_type,
- enum py_ssl_cert_requirements certreq,
- enum py_ssl_version proto_version,
- char *cacerts_file)
+ enum py_ssl_server_or_client socket_type,
+ enum py_ssl_cert_requirements certreq,
+ enum py_ssl_version proto_version,
+ char *cacerts_file)
{
- PySSLObject *self;
- char *errstr = NULL;
- int ret;
- int verification_mode;
-
- self = PyObject_New(PySSLObject, &PySSL_Type); /* Create new object */
- if (self == NULL)
- return NULL;
- self->peer_cert = NULL;
- self->ssl = NULL;
- self->ctx = NULL;
- self->Socket = NULL;
-
- /* Make sure the SSL error state is initialized */
- (void) ERR_get_state();
- ERR_clear_error();
-
- if ((key_file && !cert_file) || (!key_file && cert_file)) {
- errstr = ERRSTR("Both the key & certificate files "
- "must be specified");
- goto fail;
- }
-
- if ((socket_type == PY_SSL_SERVER) &&
- ((key_file == NULL) || (cert_file == NULL))) {
- errstr = ERRSTR("Both the key & certificate files "
- "must be specified for server-side operation");
- goto fail;
- }
-
- PySSL_BEGIN_ALLOW_THREADS
- if (proto_version == PY_SSL_VERSION_TLS1)
- self->ctx = SSL_CTX_new(TLSv1_method()); /* Set up context */
- else if (proto_version == PY_SSL_VERSION_SSL3)
- self->ctx = SSL_CTX_new(SSLv3_method()); /* Set up context */
- else if (proto_version == PY_SSL_VERSION_SSL2)
- self->ctx = SSL_CTX_new(SSLv2_method()); /* Set up context */
- else if (proto_version == PY_SSL_VERSION_SSL23)
- self->ctx = SSL_CTX_new(SSLv23_method()); /* Set up context */
- PySSL_END_ALLOW_THREADS
-
- if (self->ctx == NULL) {
- errstr = ERRSTR("Invalid SSL protocol variant specified.");
- goto fail;
- }
-
- if (certreq != PY_SSL_CERT_NONE) {
- if (cacerts_file == NULL) {
- errstr = ERRSTR("No root certificates specified for "
- "verification of other-side certificates.");
- goto fail;
- } else {
- PySSL_BEGIN_ALLOW_THREADS
- ret = SSL_CTX_load_verify_locations(self->ctx,
- cacerts_file,
- NULL);
- PySSL_END_ALLOW_THREADS
- if (ret != 1) {
- _setSSLError(NULL, 0, __FILE__, __LINE__);
- goto fail;
- }
- }
- }
- if (key_file) {
- PySSL_BEGIN_ALLOW_THREADS
- ret = SSL_CTX_use_PrivateKey_file(self->ctx, key_file,
- SSL_FILETYPE_PEM);
- PySSL_END_ALLOW_THREADS
- if (ret != 1) {
- _setSSLError(NULL, ret, __FILE__, __LINE__);
- goto fail;
- }
-
- PySSL_BEGIN_ALLOW_THREADS
- ret = SSL_CTX_use_certificate_chain_file(self->ctx,
- cert_file);
- PySSL_END_ALLOW_THREADS
- if (ret != 1) {
- /*
- fprintf(stderr, "ret is %d, errcode is %lu, %lu, with file \"%s\"\n",
- ret, ERR_peek_error(), ERR_peek_last_error(), cert_file);
- */
- if (ERR_peek_last_error() != 0) {
- _setSSLError(NULL, ret, __FILE__, __LINE__);
- goto fail;
- }
- }
- }
-
- /* ssl compatibility */
- SSL_CTX_set_options(self->ctx, SSL_OP_ALL);
-
- verification_mode = SSL_VERIFY_NONE;
- if (certreq == PY_SSL_CERT_OPTIONAL)
- verification_mode = SSL_VERIFY_PEER;
- else if (certreq == PY_SSL_CERT_REQUIRED)
- verification_mode = (SSL_VERIFY_PEER |
- SSL_VERIFY_FAIL_IF_NO_PEER_CERT);
- SSL_CTX_set_verify(self->ctx, verification_mode,
- NULL); /* set verify lvl */
-
- PySSL_BEGIN_ALLOW_THREADS
- self->ssl = SSL_new(self->ctx); /* New ssl struct */
- PySSL_END_ALLOW_THREADS
- SSL_set_fd(self->ssl, Sock->sock_fd); /* Set the socket for SSL */
+ PySSLObject *self;
+ char *errstr = NULL;
+ int ret;
+ int verification_mode;
+
+ self = PyObject_New(PySSLObject, &PySSL_Type); /* Create new object */
+ if (self == NULL)
+ return NULL;
+ self->peer_cert = NULL;
+ self->ssl = NULL;
+ self->ctx = NULL;
+ self->Socket = NULL;
+
+ /* Make sure the SSL error state is initialized */
+ (void) ERR_get_state();
+ ERR_clear_error();
+
+ if ((key_file && !cert_file) || (!key_file && cert_file)) {
+ errstr = ERRSTR("Both the key & certificate files "
+ "must be specified");
+ goto fail;
+ }
+
+ if ((socket_type == PY_SSL_SERVER) &&
+ ((key_file == NULL) || (cert_file == NULL))) {
+ errstr = ERRSTR("Both the key & certificate files "
+ "must be specified for server-side operation");
+ goto fail;
+ }
+
+ PySSL_BEGIN_ALLOW_THREADS
+ if (proto_version == PY_SSL_VERSION_TLS1)
+ self->ctx = SSL_CTX_new(TLSv1_method()); /* Set up context */
+ else if (proto_version == PY_SSL_VERSION_SSL3)
+ self->ctx = SSL_CTX_new(SSLv3_method()); /* Set up context */
+ else if (proto_version == PY_SSL_VERSION_SSL2)
+ self->ctx = SSL_CTX_new(SSLv2_method()); /* Set up context */
+ else if (proto_version == PY_SSL_VERSION_SSL23)
+ self->ctx = SSL_CTX_new(SSLv23_method()); /* Set up context */
+ PySSL_END_ALLOW_THREADS
+
+ if (self->ctx == NULL) {
+ errstr = ERRSTR("Invalid SSL protocol variant specified.");
+ goto fail;
+ }
+
+ if (certreq != PY_SSL_CERT_NONE) {
+ if (cacerts_file == NULL) {
+ errstr = ERRSTR("No root certificates specified for "
+ "verification of other-side certificates.");
+ goto fail;
+ } else {
+ PySSL_BEGIN_ALLOW_THREADS
+ ret = SSL_CTX_load_verify_locations(self->ctx,
+ cacerts_file,
+ NULL);
+ PySSL_END_ALLOW_THREADS
+ if (ret != 1) {
+ _setSSLError(NULL, 0, __FILE__, __LINE__);
+ goto fail;
+ }
+ }
+ }
+ if (key_file) {
+ PySSL_BEGIN_ALLOW_THREADS
+ ret = SSL_CTX_use_PrivateKey_file(self->ctx, key_file,
+ SSL_FILETYPE_PEM);
+ PySSL_END_ALLOW_THREADS
+ if (ret != 1) {
+ _setSSLError(NULL, ret, __FILE__, __LINE__);
+ goto fail;
+ }
+
+ PySSL_BEGIN_ALLOW_THREADS
+ ret = SSL_CTX_use_certificate_chain_file(self->ctx,
+ cert_file);
+ PySSL_END_ALLOW_THREADS
+ if (ret != 1) {
+ /*
+ fprintf(stderr, "ret is %d, errcode is %lu, %lu, with file \"%s\"\n",
+ ret, ERR_peek_error(), ERR_peek_last_error(), cert_file);
+ */
+ if (ERR_peek_last_error() != 0) {
+ _setSSLError(NULL, ret, __FILE__, __LINE__);
+ goto fail;
+ }
+ }
+ }
+
+ /* ssl compatibility */
+ SSL_CTX_set_options(self->ctx, SSL_OP_ALL);
+
+ verification_mode = SSL_VERIFY_NONE;
+ if (certreq == PY_SSL_CERT_OPTIONAL)
+ verification_mode = SSL_VERIFY_PEER;
+ else if (certreq == PY_SSL_CERT_REQUIRED)
+ verification_mode = (SSL_VERIFY_PEER |
+ SSL_VERIFY_FAIL_IF_NO_PEER_CERT);
+ SSL_CTX_set_verify(self->ctx, verification_mode,
+ NULL); /* set verify lvl */
+
+ PySSL_BEGIN_ALLOW_THREADS
+ self->ssl = SSL_new(self->ctx); /* New ssl struct */
+ PySSL_END_ALLOW_THREADS
+ SSL_set_fd(self->ssl, Sock->sock_fd); /* Set the socket for SSL */
#ifdef SSL_MODE_AUTO_RETRY
- SSL_set_mode(self->ssl, SSL_MODE_AUTO_RETRY);
+ SSL_set_mode(self->ssl, SSL_MODE_AUTO_RETRY);
#endif
- /* If the socket is in non-blocking mode or timeout mode, set the BIO
- * to non-blocking mode (blocking is the default)
- */
- if (Sock->sock_timeout >= 0.0) {
- /* Set both the read and write BIO's to non-blocking mode */
- BIO_set_nbio(SSL_get_rbio(self->ssl), 1);
- BIO_set_nbio(SSL_get_wbio(self->ssl), 1);
- }
-
- PySSL_BEGIN_ALLOW_THREADS
- if (socket_type == PY_SSL_CLIENT)
- SSL_set_connect_state(self->ssl);
- else
- SSL_set_accept_state(self->ssl);
- PySSL_END_ALLOW_THREADS
+ /* If the socket is in non-blocking mode or timeout mode, set the BIO
+ * to non-blocking mode (blocking is the default)
+ */
+ if (Sock->sock_timeout >= 0.0) {
+ /* Set both the read and write BIO's to non-blocking mode */
+ BIO_set_nbio(SSL_get_rbio(self->ssl), 1);
+ BIO_set_nbio(SSL_get_wbio(self->ssl), 1);
+ }
+
+ PySSL_BEGIN_ALLOW_THREADS
+ if (socket_type == PY_SSL_CLIENT)
+ SSL_set_connect_state(self->ssl);
+ else
+ SSL_set_accept_state(self->ssl);
+ PySSL_END_ALLOW_THREADS
- self->Socket = PyWeakref_NewRef((PyObject *) Sock, Py_None);
- return self;
+ self->Socket = PyWeakref_NewRef((PyObject *) Sock, Py_None);
+ return self;
fail:
- if (errstr)
- PyErr_SetString(PySSLErrorObject, errstr);
- Py_DECREF(self);
- return NULL;
+ if (errstr)
+ PyErr_SetString(PySSLErrorObject, errstr);
+ Py_DECREF(self);
+ return NULL;
}
static PyObject *
PySSL_sslwrap(PyObject *self, PyObject *args)
{
- PySocketSockObject *Sock;
- int server_side = 0;
- int verification_mode = PY_SSL_CERT_NONE;
- int protocol = PY_SSL_VERSION_SSL23;
- char *key_file = NULL;
- char *cert_file = NULL;
- char *cacerts_file = NULL;
-
- if (!PyArg_ParseTuple(args, "O!i|zziiz:sslwrap",
- PySocketModule.Sock_Type,
- &Sock,
- &server_side,
- &key_file, &cert_file,
- &verification_mode, &protocol,
- &cacerts_file))
- return NULL;
-
- /*
- fprintf(stderr,
- "server_side is %d, keyfile %p, certfile %p, verify_mode %d, "
- "protocol %d, certs %p\n",
- server_side, key_file, cert_file, verification_mode,
- protocol, cacerts_file);
- */
-
- return (PyObject *) newPySSLObject(Sock, key_file, cert_file,
- server_side, verification_mode,
- protocol, cacerts_file);
+ PySocketSockObject *Sock;
+ int server_side = 0;
+ int verification_mode = PY_SSL_CERT_NONE;
+ int protocol = PY_SSL_VERSION_SSL23;
+ char *key_file = NULL;
+ char *cert_file = NULL;
+ char *cacerts_file = NULL;
+
+ if (!PyArg_ParseTuple(args, "O!i|zziiz:sslwrap",
+ PySocketModule.Sock_Type,
+ &Sock,
+ &server_side,
+ &key_file, &cert_file,
+ &verification_mode, &protocol,
+ &cacerts_file))
+ return NULL;
+
+ /*
+ fprintf(stderr,
+ "server_side is %d, keyfile %p, certfile %p, verify_mode %d, "
+ "protocol %d, certs %p\n",
+ server_side, key_file, cert_file, verification_mode,
+ protocol, cacerts_file);
+ */
+
+ return (PyObject *) newPySSLObject(Sock, key_file, cert_file,
+ server_side, verification_mode,
+ protocol, cacerts_file);
}
PyDoc_STRVAR(ssl_doc,
@@ -443,580 +443,580 @@
static PyObject *PySSL_SSLdo_handshake(PySSLObject *self)
{
- int ret;
- int err;
- int sockstate, nonblocking;
- PySocketSockObject *sock
- = (PySocketSockObject *) PyWeakref_GetObject(self->Socket);
-
- if (((PyObject*)sock) == Py_None) {
- _setSSLError("Underlying socket connection gone",
- PY_SSL_ERROR_NO_SOCKET, __FILE__, __LINE__);
- return NULL;
- }
-
- /* just in case the blocking state of the socket has been changed */
- nonblocking = (sock->sock_timeout >= 0.0);
- BIO_set_nbio(SSL_get_rbio(self->ssl), nonblocking);
- BIO_set_nbio(SSL_get_wbio(self->ssl), nonblocking);
-
- /* Actually negotiate SSL connection */
- /* XXX If SSL_do_handshake() returns 0, it's also a failure. */
- sockstate = 0;
- do {
- PySSL_BEGIN_ALLOW_THREADS
- ret = SSL_do_handshake(self->ssl);
- err = SSL_get_error(self->ssl, ret);
- PySSL_END_ALLOW_THREADS
- if(PyErr_CheckSignals()) {
- return NULL;
- }
- if (err == SSL_ERROR_WANT_READ) {
- sockstate = check_socket_and_wait_for_timeout(sock, 0);
- } else if (err == SSL_ERROR_WANT_WRITE) {
- sockstate = check_socket_and_wait_for_timeout(sock, 1);
- } else {
- sockstate = SOCKET_OPERATION_OK;
- }
- if (sockstate == SOCKET_HAS_TIMED_OUT) {
- PyErr_SetString(PySSLErrorObject,
- ERRSTR("The handshake operation timed out"));
- return NULL;
- } else if (sockstate == SOCKET_HAS_BEEN_CLOSED) {
- PyErr_SetString(PySSLErrorObject,
- ERRSTR("Underlying socket has been closed."));
- return NULL;
- } else if (sockstate == SOCKET_TOO_LARGE_FOR_SELECT) {
- PyErr_SetString(PySSLErrorObject,
- ERRSTR("Underlying socket too large for select()."));
- return NULL;
- } else if (sockstate == SOCKET_IS_NONBLOCKING) {
- break;
- }
- } while (err == SSL_ERROR_WANT_READ || err == SSL_ERROR_WANT_WRITE);
- if (ret < 1)
- return PySSL_SetError(self, ret, __FILE__, __LINE__);
- self->ssl->debug = 1;
+ int ret;
+ int err;
+ int sockstate, nonblocking;
+ PySocketSockObject *sock
+ = (PySocketSockObject *) PyWeakref_GetObject(self->Socket);
+
+ if (((PyObject*)sock) == Py_None) {
+ _setSSLError("Underlying socket connection gone",
+ PY_SSL_ERROR_NO_SOCKET, __FILE__, __LINE__);
+ return NULL;
+ }
- if (self->peer_cert)
- X509_free (self->peer_cert);
+ /* just in case the blocking state of the socket has been changed */
+ nonblocking = (sock->sock_timeout >= 0.0);
+ BIO_set_nbio(SSL_get_rbio(self->ssl), nonblocking);
+ BIO_set_nbio(SSL_get_wbio(self->ssl), nonblocking);
+
+ /* Actually negotiate SSL connection */
+ /* XXX If SSL_do_handshake() returns 0, it's also a failure. */
+ sockstate = 0;
+ do {
PySSL_BEGIN_ALLOW_THREADS
- self->peer_cert = SSL_get_peer_certificate(self->ssl);
- PySSL_END_ALLOW_THREADS
+ ret = SSL_do_handshake(self->ssl);
+ err = SSL_get_error(self->ssl, ret);
+ PySSL_END_ALLOW_THREADS
+ if(PyErr_CheckSignals()) {
+ return NULL;
+ }
+ if (err == SSL_ERROR_WANT_READ) {
+ sockstate = check_socket_and_wait_for_timeout(sock, 0);
+ } else if (err == SSL_ERROR_WANT_WRITE) {
+ sockstate = check_socket_and_wait_for_timeout(sock, 1);
+ } else {
+ sockstate = SOCKET_OPERATION_OK;
+ }
+ if (sockstate == SOCKET_HAS_TIMED_OUT) {
+ PyErr_SetString(PySSLErrorObject,
+ ERRSTR("The handshake operation timed out"));
+ return NULL;
+ } else if (sockstate == SOCKET_HAS_BEEN_CLOSED) {
+ PyErr_SetString(PySSLErrorObject,
+ ERRSTR("Underlying socket has been closed."));
+ return NULL;
+ } else if (sockstate == SOCKET_TOO_LARGE_FOR_SELECT) {
+ PyErr_SetString(PySSLErrorObject,
+ ERRSTR("Underlying socket too large for select()."));
+ return NULL;
+ } else if (sockstate == SOCKET_IS_NONBLOCKING) {
+ break;
+ }
+ } while (err == SSL_ERROR_WANT_READ || err == SSL_ERROR_WANT_WRITE);
+ if (ret < 1)
+ return PySSL_SetError(self, ret, __FILE__, __LINE__);
+ self->ssl->debug = 1;
+
+ if (self->peer_cert)
+ X509_free (self->peer_cert);
+ PySSL_BEGIN_ALLOW_THREADS
+ self->peer_cert = SSL_get_peer_certificate(self->ssl);
+ PySSL_END_ALLOW_THREADS
- Py_INCREF(Py_None);
- return Py_None;
+ Py_INCREF(Py_None);
+ return Py_None;
}
static PyObject *
_create_tuple_for_attribute (ASN1_OBJECT *name, ASN1_STRING *value) {
- char namebuf[X509_NAME_MAXLEN];
- int buflen;
- PyObject *name_obj;
- PyObject *value_obj;
- PyObject *attr;
- unsigned char *valuebuf = NULL;
-
- buflen = OBJ_obj2txt(namebuf, sizeof(namebuf), name, 0);
- if (buflen < 0) {
- _setSSLError(NULL, 0, __FILE__, __LINE__);
- goto fail;
- }
- name_obj = PyUnicode_FromStringAndSize(namebuf, buflen);
- if (name_obj == NULL)
- goto fail;
-
- buflen = ASN1_STRING_to_UTF8(&valuebuf, value);
- if (buflen < 0) {
- _setSSLError(NULL, 0, __FILE__, __LINE__);
- Py_DECREF(name_obj);
- goto fail;
- }
- value_obj = PyUnicode_DecodeUTF8((char *) valuebuf,
- buflen, "strict");
- OPENSSL_free(valuebuf);
- if (value_obj == NULL) {
- Py_DECREF(name_obj);
- goto fail;
- }
- attr = PyTuple_New(2);
- if (attr == NULL) {
- Py_DECREF(name_obj);
- Py_DECREF(value_obj);
- goto fail;
- }
- PyTuple_SET_ITEM(attr, 0, name_obj);
- PyTuple_SET_ITEM(attr, 1, value_obj);
- return attr;
+ char namebuf[X509_NAME_MAXLEN];
+ int buflen;
+ PyObject *name_obj;
+ PyObject *value_obj;
+ PyObject *attr;
+ unsigned char *valuebuf = NULL;
+
+ buflen = OBJ_obj2txt(namebuf, sizeof(namebuf), name, 0);
+ if (buflen < 0) {
+ _setSSLError(NULL, 0, __FILE__, __LINE__);
+ goto fail;
+ }
+ name_obj = PyUnicode_FromStringAndSize(namebuf, buflen);
+ if (name_obj == NULL)
+ goto fail;
+
+ buflen = ASN1_STRING_to_UTF8(&valuebuf, value);
+ if (buflen < 0) {
+ _setSSLError(NULL, 0, __FILE__, __LINE__);
+ Py_DECREF(name_obj);
+ goto fail;
+ }
+ value_obj = PyUnicode_DecodeUTF8((char *) valuebuf,
+ buflen, "strict");
+ OPENSSL_free(valuebuf);
+ if (value_obj == NULL) {
+ Py_DECREF(name_obj);
+ goto fail;
+ }
+ attr = PyTuple_New(2);
+ if (attr == NULL) {
+ Py_DECREF(name_obj);
+ Py_DECREF(value_obj);
+ goto fail;
+ }
+ PyTuple_SET_ITEM(attr, 0, name_obj);
+ PyTuple_SET_ITEM(attr, 1, value_obj);
+ return attr;
fail:
- return NULL;
+ return NULL;
}
static PyObject *
_create_tuple_for_X509_NAME (X509_NAME *xname)
{
- PyObject *dn = NULL; /* tuple which represents the "distinguished name" */
- PyObject *rdn = NULL; /* tuple to hold a "relative distinguished name" */
- PyObject *rdnt;
- PyObject *attr = NULL; /* tuple to hold an attribute */
- int entry_count = X509_NAME_entry_count(xname);
- X509_NAME_ENTRY *entry;
- ASN1_OBJECT *name;
- ASN1_STRING *value;
- int index_counter;
- int rdn_level = -1;
- int retcode;
-
- dn = PyList_New(0);
- if (dn == NULL)
- return NULL;
- /* now create another tuple to hold the top-level RDN */
- rdn = PyList_New(0);
- if (rdn == NULL)
- goto fail0;
-
- for (index_counter = 0;
- index_counter < entry_count;
- index_counter++)
- {
- entry = X509_NAME_get_entry(xname, index_counter);
-
- /* check to see if we've gotten to a new RDN */
- if (rdn_level >= 0) {
- if (rdn_level != entry->set) {
- /* yes, new RDN */
- /* add old RDN to DN */
- rdnt = PyList_AsTuple(rdn);
- Py_DECREF(rdn);
- if (rdnt == NULL)
- goto fail0;
- retcode = PyList_Append(dn, rdnt);
- Py_DECREF(rdnt);
- if (retcode < 0)
- goto fail0;
- /* create new RDN */
- rdn = PyList_New(0);
- if (rdn == NULL)
- goto fail0;
- }
- }
- rdn_level = entry->set;
-
- /* now add this attribute to the current RDN */
- name = X509_NAME_ENTRY_get_object(entry);
- value = X509_NAME_ENTRY_get_data(entry);
- attr = _create_tuple_for_attribute(name, value);
- /*
- fprintf(stderr, "RDN level %d, attribute %s: %s\n",
- entry->set,
- PyBytes_AS_STRING(PyTuple_GET_ITEM(attr, 0)),
- PyBytes_AS_STRING(PyTuple_GET_ITEM(attr, 1)));
- */
- if (attr == NULL)
- goto fail1;
- retcode = PyList_Append(rdn, attr);
- Py_DECREF(attr);
- if (retcode < 0)
- goto fail1;
- }
- /* now, there's typically a dangling RDN */
- if ((rdn != NULL) && (PyList_Size(rdn) > 0)) {
- rdnt = PyList_AsTuple(rdn);
- Py_DECREF(rdn);
- if (rdnt == NULL)
- goto fail0;
- retcode = PyList_Append(dn, rdnt);
- Py_DECREF(rdnt);
- if (retcode < 0)
- goto fail0;
- }
-
- /* convert list to tuple */
- rdnt = PyList_AsTuple(dn);
- Py_DECREF(dn);
- if (rdnt == NULL)
- return NULL;
- return rdnt;
+ PyObject *dn = NULL; /* tuple which represents the "distinguished name" */
+ PyObject *rdn = NULL; /* tuple to hold a "relative distinguished name" */
+ PyObject *rdnt;
+ PyObject *attr = NULL; /* tuple to hold an attribute */
+ int entry_count = X509_NAME_entry_count(xname);
+ X509_NAME_ENTRY *entry;
+ ASN1_OBJECT *name;
+ ASN1_STRING *value;
+ int index_counter;
+ int rdn_level = -1;
+ int retcode;
+
+ dn = PyList_New(0);
+ if (dn == NULL)
+ return NULL;
+ /* now create another tuple to hold the top-level RDN */
+ rdn = PyList_New(0);
+ if (rdn == NULL)
+ goto fail0;
+
+ for (index_counter = 0;
+ index_counter < entry_count;
+ index_counter++)
+ {
+ entry = X509_NAME_get_entry(xname, index_counter);
+
+ /* check to see if we've gotten to a new RDN */
+ if (rdn_level >= 0) {
+ if (rdn_level != entry->set) {
+ /* yes, new RDN */
+ /* add old RDN to DN */
+ rdnt = PyList_AsTuple(rdn);
+ Py_DECREF(rdn);
+ if (rdnt == NULL)
+ goto fail0;
+ retcode = PyList_Append(dn, rdnt);
+ Py_DECREF(rdnt);
+ if (retcode < 0)
+ goto fail0;
+ /* create new RDN */
+ rdn = PyList_New(0);
+ if (rdn == NULL)
+ goto fail0;
+ }
+ }
+ rdn_level = entry->set;
+
+ /* now add this attribute to the current RDN */
+ name = X509_NAME_ENTRY_get_object(entry);
+ value = X509_NAME_ENTRY_get_data(entry);
+ attr = _create_tuple_for_attribute(name, value);
+ /*
+ fprintf(stderr, "RDN level %d, attribute %s: %s\n",
+ entry->set,
+ PyBytes_AS_STRING(PyTuple_GET_ITEM(attr, 0)),
+ PyBytes_AS_STRING(PyTuple_GET_ITEM(attr, 1)));
+ */
+ if (attr == NULL)
+ goto fail1;
+ retcode = PyList_Append(rdn, attr);
+ Py_DECREF(attr);
+ if (retcode < 0)
+ goto fail1;
+ }
+ /* now, there's typically a dangling RDN */
+ if ((rdn != NULL) && (PyList_Size(rdn) > 0)) {
+ rdnt = PyList_AsTuple(rdn);
+ Py_DECREF(rdn);
+ if (rdnt == NULL)
+ goto fail0;
+ retcode = PyList_Append(dn, rdnt);
+ Py_DECREF(rdnt);
+ if (retcode < 0)
+ goto fail0;
+ }
+
+ /* convert list to tuple */
+ rdnt = PyList_AsTuple(dn);
+ Py_DECREF(dn);
+ if (rdnt == NULL)
+ return NULL;
+ return rdnt;
fail1:
- Py_XDECREF(rdn);
+ Py_XDECREF(rdn);
fail0:
- Py_XDECREF(dn);
- return NULL;
+ Py_XDECREF(dn);
+ return NULL;
}
static PyObject *
_get_peer_alt_names (X509 *certificate) {
- /* this code follows the procedure outlined in
- OpenSSL's crypto/x509v3/v3_prn.c:X509v3_EXT_print()
- function to extract the STACK_OF(GENERAL_NAME),
- then iterates through the stack to add the
- names. */
-
- int i, j;
- PyObject *peer_alt_names = Py_None;
- PyObject *v, *t;
- X509_EXTENSION *ext = NULL;
- GENERAL_NAMES *names = NULL;
- GENERAL_NAME *name;
- X509V3_EXT_METHOD *method;
- BIO *biobuf = NULL;
- char buf[2048];
- char *vptr;
- int len;
- /* Issue #2973: ASN1_item_d2i() API changed in OpenSSL 0.9.6m */
+ /* this code follows the procedure outlined in
+ OpenSSL's crypto/x509v3/v3_prn.c:X509v3_EXT_print()
+ function to extract the STACK_OF(GENERAL_NAME),
+ then iterates through the stack to add the
+ names. */
+
+ int i, j;
+ PyObject *peer_alt_names = Py_None;
+ PyObject *v, *t;
+ X509_EXTENSION *ext = NULL;
+ GENERAL_NAMES *names = NULL;
+ GENERAL_NAME *name;
+ X509V3_EXT_METHOD *method;
+ BIO *biobuf = NULL;
+ char buf[2048];
+ char *vptr;
+ int len;
+ /* Issue #2973: ASN1_item_d2i() API changed in OpenSSL 0.9.6m */
#if OPENSSL_VERSION_NUMBER >= 0x009060dfL
- const unsigned char *p;
+ const unsigned char *p;
#else
- unsigned char *p;
+ unsigned char *p;
#endif
- if (certificate == NULL)
- return peer_alt_names;
+ if (certificate == NULL)
+ return peer_alt_names;
+
+ /* get a memory buffer */
+ biobuf = BIO_new(BIO_s_mem());
+
+ i = 0;
+ while ((i = X509_get_ext_by_NID(
+ certificate, NID_subject_alt_name, i)) >= 0) {
+
+ if (peer_alt_names == Py_None) {
+ peer_alt_names = PyList_New(0);
+ if (peer_alt_names == NULL)
+ goto fail;
+ }
- /* get a memory buffer */
- biobuf = BIO_new(BIO_s_mem());
+ /* now decode the altName */
+ ext = X509_get_ext(certificate, i);
+ if(!(method = X509V3_EXT_get(ext))) {
+ PyErr_SetString
+ (PySSLErrorObject,
+ ERRSTR("No method for internalizing subjectAltName!"));
+ goto fail;
+ }
- i = 0;
- while ((i = X509_get_ext_by_NID(
- certificate, NID_subject_alt_name, i)) >= 0) {
-
- if (peer_alt_names == Py_None) {
- peer_alt_names = PyList_New(0);
- if (peer_alt_names == NULL)
- goto fail;
- }
-
- /* now decode the altName */
- ext = X509_get_ext(certificate, i);
- if(!(method = X509V3_EXT_get(ext))) {
- PyErr_SetString
- (PySSLErrorObject,
- ERRSTR("No method for internalizing subjectAltName!"));
- goto fail;
- }
-
- p = ext->value->data;
- if (method->it)
- names = (GENERAL_NAMES*)
- (ASN1_item_d2i(NULL,
- &p,
- ext->value->length,
- ASN1_ITEM_ptr(method->it)));
- else
- names = (GENERAL_NAMES*)
- (method->d2i(NULL,
- &p,
- ext->value->length));
-
- for(j = 0; j < sk_GENERAL_NAME_num(names); j++) {
-
- /* get a rendering of each name in the set of names */
-
- name = sk_GENERAL_NAME_value(names, j);
- if (name->type == GEN_DIRNAME) {
-
- /* we special-case DirName as a tuple of
- tuples of attributes */
-
- t = PyTuple_New(2);
- if (t == NULL) {
- goto fail;
- }
-
- v = PyUnicode_FromString("DirName");
- if (v == NULL) {
- Py_DECREF(t);
- goto fail;
- }
- PyTuple_SET_ITEM(t, 0, v);
-
- v = _create_tuple_for_X509_NAME (name->d.dirn);
- if (v == NULL) {
- Py_DECREF(t);
- goto fail;
- }
- PyTuple_SET_ITEM(t, 1, v);
-
- } else {
-
- /* for everything else, we use the OpenSSL print form */
-
- (void) BIO_reset(biobuf);
- GENERAL_NAME_print(biobuf, name);
- len = BIO_gets(biobuf, buf, sizeof(buf)-1);
- if (len < 0) {
- _setSSLError(NULL, 0, __FILE__, __LINE__);
- goto fail;
- }
- vptr = strchr(buf, ':');
- if (vptr == NULL)
- goto fail;
- t = PyTuple_New(2);
- if (t == NULL)
- goto fail;
- v = PyUnicode_FromStringAndSize(buf, (vptr - buf));
- if (v == NULL) {
- Py_DECREF(t);
- goto fail;
- }
- PyTuple_SET_ITEM(t, 0, v);
- v = PyUnicode_FromStringAndSize((vptr + 1),
- (len - (vptr - buf + 1)));
- if (v == NULL) {
- Py_DECREF(t);
- goto fail;
- }
- PyTuple_SET_ITEM(t, 1, v);
- }
-
- /* and add that rendering to the list */
-
- if (PyList_Append(peer_alt_names, t) < 0) {
- Py_DECREF(t);
- goto fail;
- }
- Py_DECREF(t);
- }
- }
- BIO_free(biobuf);
- if (peer_alt_names != Py_None) {
- v = PyList_AsTuple(peer_alt_names);
- Py_DECREF(peer_alt_names);
- return v;
- } else {
- return peer_alt_names;
- }
+ p = ext->value->data;
+ if (method->it)
+ names = (GENERAL_NAMES*)
+ (ASN1_item_d2i(NULL,
+ &p,
+ ext->value->length,
+ ASN1_ITEM_ptr(method->it)));
+ else
+ names = (GENERAL_NAMES*)
+ (method->d2i(NULL,
+ &p,
+ ext->value->length));
+
+ for(j = 0; j < sk_GENERAL_NAME_num(names); j++) {
+
+ /* get a rendering of each name in the set of names */
+
+ name = sk_GENERAL_NAME_value(names, j);
+ if (name->type == GEN_DIRNAME) {
+
+ /* we special-case DirName as a tuple of
+ tuples of attributes */
+
+ t = PyTuple_New(2);
+ if (t == NULL) {
+ goto fail;
+ }
+
+ v = PyUnicode_FromString("DirName");
+ if (v == NULL) {
+ Py_DECREF(t);
+ goto fail;
+ }
+ PyTuple_SET_ITEM(t, 0, v);
+
+ v = _create_tuple_for_X509_NAME (name->d.dirn);
+ if (v == NULL) {
+ Py_DECREF(t);
+ goto fail;
+ }
+ PyTuple_SET_ITEM(t, 1, v);
+
+ } else {
+
+ /* for everything else, we use the OpenSSL print form */
+
+ (void) BIO_reset(biobuf);
+ GENERAL_NAME_print(biobuf, name);
+ len = BIO_gets(biobuf, buf, sizeof(buf)-1);
+ if (len < 0) {
+ _setSSLError(NULL, 0, __FILE__, __LINE__);
+ goto fail;
+ }
+ vptr = strchr(buf, ':');
+ if (vptr == NULL)
+ goto fail;
+ t = PyTuple_New(2);
+ if (t == NULL)
+ goto fail;
+ v = PyUnicode_FromStringAndSize(buf, (vptr - buf));
+ if (v == NULL) {
+ Py_DECREF(t);
+ goto fail;
+ }
+ PyTuple_SET_ITEM(t, 0, v);
+ v = PyUnicode_FromStringAndSize((vptr + 1),
+ (len - (vptr - buf + 1)));
+ if (v == NULL) {
+ Py_DECREF(t);
+ goto fail;
+ }
+ PyTuple_SET_ITEM(t, 1, v);
+ }
+
+ /* and add that rendering to the list */
+
+ if (PyList_Append(peer_alt_names, t) < 0) {
+ Py_DECREF(t);
+ goto fail;
+ }
+ Py_DECREF(t);
+ }
+ }
+ BIO_free(biobuf);
+ if (peer_alt_names != Py_None) {
+ v = PyList_AsTuple(peer_alt_names);
+ Py_DECREF(peer_alt_names);
+ return v;
+ } else {
+ return peer_alt_names;
+ }
fail:
- if (biobuf != NULL)
- BIO_free(biobuf);
+ if (biobuf != NULL)
+ BIO_free(biobuf);
- if (peer_alt_names != Py_None) {
- Py_XDECREF(peer_alt_names);
- }
+ if (peer_alt_names != Py_None) {
+ Py_XDECREF(peer_alt_names);
+ }
- return NULL;
+ return NULL;
}
static PyObject *
_decode_certificate (X509 *certificate, int verbose) {
- PyObject *retval = NULL;
- BIO *biobuf = NULL;
- PyObject *peer;
- PyObject *peer_alt_names = NULL;
- PyObject *issuer;
- PyObject *version;
- PyObject *sn_obj;
- ASN1_INTEGER *serialNumber;
- char buf[2048];
- int len;
- ASN1_TIME *notBefore, *notAfter;
- PyObject *pnotBefore, *pnotAfter;
-
- retval = PyDict_New();
- if (retval == NULL)
- return NULL;
-
- peer = _create_tuple_for_X509_NAME(
- X509_get_subject_name(certificate));
- if (peer == NULL)
- goto fail0;
- if (PyDict_SetItemString(retval, (const char *) "subject", peer) < 0) {
- Py_DECREF(peer);
- goto fail0;
- }
- Py_DECREF(peer);
-
- if (verbose) {
- issuer = _create_tuple_for_X509_NAME(
- X509_get_issuer_name(certificate));
- if (issuer == NULL)
- goto fail0;
- if (PyDict_SetItemString(retval, (const char *)"issuer", issuer) < 0) {
- Py_DECREF(issuer);
- goto fail0;
- }
- Py_DECREF(issuer);
-
- version = PyLong_FromLong(X509_get_version(certificate) + 1);
- if (PyDict_SetItemString(retval, "version", version) < 0) {
- Py_DECREF(version);
- goto fail0;
- }
- Py_DECREF(version);
- }
-
- /* get a memory buffer */
- biobuf = BIO_new(BIO_s_mem());
-
- if (verbose) {
-
- (void) BIO_reset(biobuf);
- serialNumber = X509_get_serialNumber(certificate);
- /* should not exceed 20 octets, 160 bits, so buf is big enough */
- i2a_ASN1_INTEGER(biobuf, serialNumber);
- len = BIO_gets(biobuf, buf, sizeof(buf)-1);
- if (len < 0) {
- _setSSLError(NULL, 0, __FILE__, __LINE__);
- goto fail1;
- }
- sn_obj = PyUnicode_FromStringAndSize(buf, len);
- if (sn_obj == NULL)
- goto fail1;
- if (PyDict_SetItemString(retval, "serialNumber", sn_obj) < 0) {
- Py_DECREF(sn_obj);
- goto fail1;
- }
- Py_DECREF(sn_obj);
-
- (void) BIO_reset(biobuf);
- notBefore = X509_get_notBefore(certificate);
- ASN1_TIME_print(biobuf, notBefore);
- len = BIO_gets(biobuf, buf, sizeof(buf)-1);
- if (len < 0) {
- _setSSLError(NULL, 0, __FILE__, __LINE__);
- goto fail1;
- }
- pnotBefore = PyUnicode_FromStringAndSize(buf, len);
- if (pnotBefore == NULL)
- goto fail1;
- if (PyDict_SetItemString(retval, "notBefore", pnotBefore) < 0) {
- Py_DECREF(pnotBefore);
- goto fail1;
- }
- Py_DECREF(pnotBefore);
- }
-
- (void) BIO_reset(biobuf);
- notAfter = X509_get_notAfter(certificate);
- ASN1_TIME_print(biobuf, notAfter);
- len = BIO_gets(biobuf, buf, sizeof(buf)-1);
- if (len < 0) {
- _setSSLError(NULL, 0, __FILE__, __LINE__);
- goto fail1;
- }
- pnotAfter = PyUnicode_FromStringAndSize(buf, len);
- if (pnotAfter == NULL)
- goto fail1;
- if (PyDict_SetItemString(retval, "notAfter", pnotAfter) < 0) {
- Py_DECREF(pnotAfter);
- goto fail1;
- }
- Py_DECREF(pnotAfter);
-
- /* Now look for subjectAltName */
-
- peer_alt_names = _get_peer_alt_names(certificate);
- if (peer_alt_names == NULL)
- goto fail1;
- else if (peer_alt_names != Py_None) {
- if (PyDict_SetItemString(retval, "subjectAltName",
- peer_alt_names) < 0) {
- Py_DECREF(peer_alt_names);
- goto fail1;
- }
- Py_DECREF(peer_alt_names);
- }
+ PyObject *retval = NULL;
+ BIO *biobuf = NULL;
+ PyObject *peer;
+ PyObject *peer_alt_names = NULL;
+ PyObject *issuer;
+ PyObject *version;
+ PyObject *sn_obj;
+ ASN1_INTEGER *serialNumber;
+ char buf[2048];
+ int len;
+ ASN1_TIME *notBefore, *notAfter;
+ PyObject *pnotBefore, *pnotAfter;
+
+ retval = PyDict_New();
+ if (retval == NULL)
+ return NULL;
+
+ peer = _create_tuple_for_X509_NAME(
+ X509_get_subject_name(certificate));
+ if (peer == NULL)
+ goto fail0;
+ if (PyDict_SetItemString(retval, (const char *) "subject", peer) < 0) {
+ Py_DECREF(peer);
+ goto fail0;
+ }
+ Py_DECREF(peer);
+
+ if (verbose) {
+ issuer = _create_tuple_for_X509_NAME(
+ X509_get_issuer_name(certificate));
+ if (issuer == NULL)
+ goto fail0;
+ if (PyDict_SetItemString(retval, (const char *)"issuer", issuer) < 0) {
+ Py_DECREF(issuer);
+ goto fail0;
+ }
+ Py_DECREF(issuer);
+
+ version = PyLong_FromLong(X509_get_version(certificate) + 1);
+ if (PyDict_SetItemString(retval, "version", version) < 0) {
+ Py_DECREF(version);
+ goto fail0;
+ }
+ Py_DECREF(version);
+ }
+
+ /* get a memory buffer */
+ biobuf = BIO_new(BIO_s_mem());
+
+ if (verbose) {
+
+ (void) BIO_reset(biobuf);
+ serialNumber = X509_get_serialNumber(certificate);
+ /* should not exceed 20 octets, 160 bits, so buf is big enough */
+ i2a_ASN1_INTEGER(biobuf, serialNumber);
+ len = BIO_gets(biobuf, buf, sizeof(buf)-1);
+ if (len < 0) {
+ _setSSLError(NULL, 0, __FILE__, __LINE__);
+ goto fail1;
+ }
+ sn_obj = PyUnicode_FromStringAndSize(buf, len);
+ if (sn_obj == NULL)
+ goto fail1;
+ if (PyDict_SetItemString(retval, "serialNumber", sn_obj) < 0) {
+ Py_DECREF(sn_obj);
+ goto fail1;
+ }
+ Py_DECREF(sn_obj);
+
+ (void) BIO_reset(biobuf);
+ notBefore = X509_get_notBefore(certificate);
+ ASN1_TIME_print(biobuf, notBefore);
+ len = BIO_gets(biobuf, buf, sizeof(buf)-1);
+ if (len < 0) {
+ _setSSLError(NULL, 0, __FILE__, __LINE__);
+ goto fail1;
+ }
+ pnotBefore = PyUnicode_FromStringAndSize(buf, len);
+ if (pnotBefore == NULL)
+ goto fail1;
+ if (PyDict_SetItemString(retval, "notBefore", pnotBefore) < 0) {
+ Py_DECREF(pnotBefore);
+ goto fail1;
+ }
+ Py_DECREF(pnotBefore);
+ }
+
+ (void) BIO_reset(biobuf);
+ notAfter = X509_get_notAfter(certificate);
+ ASN1_TIME_print(biobuf, notAfter);
+ len = BIO_gets(biobuf, buf, sizeof(buf)-1);
+ if (len < 0) {
+ _setSSLError(NULL, 0, __FILE__, __LINE__);
+ goto fail1;
+ }
+ pnotAfter = PyUnicode_FromStringAndSize(buf, len);
+ if (pnotAfter == NULL)
+ goto fail1;
+ if (PyDict_SetItemString(retval, "notAfter", pnotAfter) < 0) {
+ Py_DECREF(pnotAfter);
+ goto fail1;
+ }
+ Py_DECREF(pnotAfter);
+
+ /* Now look for subjectAltName */
+
+ peer_alt_names = _get_peer_alt_names(certificate);
+ if (peer_alt_names == NULL)
+ goto fail1;
+ else if (peer_alt_names != Py_None) {
+ if (PyDict_SetItemString(retval, "subjectAltName",
+ peer_alt_names) < 0) {
+ Py_DECREF(peer_alt_names);
+ goto fail1;
+ }
+ Py_DECREF(peer_alt_names);
+ }
- BIO_free(biobuf);
- return retval;
+ BIO_free(biobuf);
+ return retval;
fail1:
- if (biobuf != NULL)
- BIO_free(biobuf);
+ if (biobuf != NULL)
+ BIO_free(biobuf);
fail0:
- Py_XDECREF(retval);
- return NULL;
+ Py_XDECREF(retval);
+ return NULL;
}
static PyObject *
PySSL_test_decode_certificate (PyObject *mod, PyObject *args) {
- PyObject *retval = NULL;
- char *filename = NULL;
- X509 *x=NULL;
- BIO *cert;
- int verbose = 1;
-
- if (!PyArg_ParseTuple(args, "s|i:test_decode_certificate",
- &filename, &verbose))
- return NULL;
-
- if ((cert=BIO_new(BIO_s_file())) == NULL) {
- PyErr_SetString(PySSLErrorObject,
- "Can't malloc memory to read file");
- goto fail0;
- }
-
- if (BIO_read_filename(cert,filename) <= 0) {
- PyErr_SetString(PySSLErrorObject,
- "Can't open file");
- goto fail0;
- }
-
- x = PEM_read_bio_X509_AUX(cert,NULL, NULL, NULL);
- if (x == NULL) {
- PyErr_SetString(PySSLErrorObject,
- "Error decoding PEM-encoded file");
- goto fail0;
- }
+ PyObject *retval = NULL;
+ char *filename = NULL;
+ X509 *x=NULL;
+ BIO *cert;
+ int verbose = 1;
+
+ if (!PyArg_ParseTuple(args, "s|i:test_decode_certificate",
+ &filename, &verbose))
+ return NULL;
+
+ if ((cert=BIO_new(BIO_s_file())) == NULL) {
+ PyErr_SetString(PySSLErrorObject,
+ "Can't malloc memory to read file");
+ goto fail0;
+ }
+
+ if (BIO_read_filename(cert,filename) <= 0) {
+ PyErr_SetString(PySSLErrorObject,
+ "Can't open file");
+ goto fail0;
+ }
+
+ x = PEM_read_bio_X509_AUX(cert,NULL, NULL, NULL);
+ if (x == NULL) {
+ PyErr_SetString(PySSLErrorObject,
+ "Error decoding PEM-encoded file");
+ goto fail0;
+ }
- retval = _decode_certificate(x, verbose);
+ retval = _decode_certificate(x, verbose);
fail0:
- if (cert != NULL) BIO_free(cert);
- return retval;
+ if (cert != NULL) BIO_free(cert);
+ return retval;
}
static PyObject *
PySSL_peercert(PySSLObject *self, PyObject *args)
{
- PyObject *retval = NULL;
- int len;
- int verification;
- PyObject *binary_mode = Py_None;
-
- if (!PyArg_ParseTuple(args, "|O:peer_certificate", &binary_mode))
- return NULL;
-
- if (!self->peer_cert)
- Py_RETURN_NONE;
-
- if (PyObject_IsTrue(binary_mode)) {
- /* return cert in DER-encoded format */
-
- unsigned char *bytes_buf = NULL;
-
- bytes_buf = NULL;
- len = i2d_X509(self->peer_cert, &bytes_buf);
- if (len < 0) {
- PySSL_SetError(self, len, __FILE__, __LINE__);
- return NULL;
- }
- /* this is actually an immutable bytes sequence */
- retval = PyBytes_FromStringAndSize
- ((const char *) bytes_buf, len);
- OPENSSL_free(bytes_buf);
- return retval;
-
- } else {
-
- verification = SSL_CTX_get_verify_mode(self->ctx);
- if ((verification & SSL_VERIFY_PEER) == 0)
- return PyDict_New();
- else
- return _decode_certificate (self->peer_cert, 0);
- }
+ PyObject *retval = NULL;
+ int len;
+ int verification;
+ PyObject *binary_mode = Py_None;
+
+ if (!PyArg_ParseTuple(args, "|O:peer_certificate", &binary_mode))
+ return NULL;
+
+ if (!self->peer_cert)
+ Py_RETURN_NONE;
+
+ if (PyObject_IsTrue(binary_mode)) {
+ /* return cert in DER-encoded format */
+
+ unsigned char *bytes_buf = NULL;
+
+ bytes_buf = NULL;
+ len = i2d_X509(self->peer_cert, &bytes_buf);
+ if (len < 0) {
+ PySSL_SetError(self, len, __FILE__, __LINE__);
+ return NULL;
+ }
+ /* this is actually an immutable bytes sequence */
+ retval = PyBytes_FromStringAndSize
+ ((const char *) bytes_buf, len);
+ OPENSSL_free(bytes_buf);
+ return retval;
+
+ } else {
+
+ verification = SSL_CTX_get_verify_mode(self->ctx);
+ if ((verification & SSL_VERIFY_PEER) == 0)
+ return PyDict_New();
+ else
+ return _decode_certificate (self->peer_cert, 0);
+ }
}
PyDoc_STRVAR(PySSL_peercert_doc,
@@ -1033,60 +1033,60 @@
static PyObject *PySSL_cipher (PySSLObject *self) {
- PyObject *retval, *v;
- SSL_CIPHER *current;
- char *cipher_name;
- char *cipher_protocol;
-
- if (self->ssl == NULL)
- return Py_None;
- current = SSL_get_current_cipher(self->ssl);
- if (current == NULL)
- return Py_None;
-
- retval = PyTuple_New(3);
- if (retval == NULL)
- return NULL;
-
- cipher_name = (char *) SSL_CIPHER_get_name(current);
- if (cipher_name == NULL) {
- PyTuple_SET_ITEM(retval, 0, Py_None);
- } else {
- v = PyUnicode_FromString(cipher_name);
- if (v == NULL)
- goto fail0;
- PyTuple_SET_ITEM(retval, 0, v);
- }
- cipher_protocol = SSL_CIPHER_get_version(current);
- if (cipher_protocol == NULL) {
- PyTuple_SET_ITEM(retval, 1, Py_None);
- } else {
- v = PyUnicode_FromString(cipher_protocol);
- if (v == NULL)
- goto fail0;
- PyTuple_SET_ITEM(retval, 1, v);
- }
- v = PyLong_FromLong(SSL_CIPHER_get_bits(current, NULL));
- if (v == NULL)
- goto fail0;
- PyTuple_SET_ITEM(retval, 2, v);
- return retval;
+ PyObject *retval, *v;
+ SSL_CIPHER *current;
+ char *cipher_name;
+ char *cipher_protocol;
+
+ if (self->ssl == NULL)
+ return Py_None;
+ current = SSL_get_current_cipher(self->ssl);
+ if (current == NULL)
+ return Py_None;
+
+ retval = PyTuple_New(3);
+ if (retval == NULL)
+ return NULL;
+
+ cipher_name = (char *) SSL_CIPHER_get_name(current);
+ if (cipher_name == NULL) {
+ PyTuple_SET_ITEM(retval, 0, Py_None);
+ } else {
+ v = PyUnicode_FromString(cipher_name);
+ if (v == NULL)
+ goto fail0;
+ PyTuple_SET_ITEM(retval, 0, v);
+ }
+ cipher_protocol = SSL_CIPHER_get_version(current);
+ if (cipher_protocol == NULL) {
+ PyTuple_SET_ITEM(retval, 1, Py_None);
+ } else {
+ v = PyUnicode_FromString(cipher_protocol);
+ if (v == NULL)
+ goto fail0;
+ PyTuple_SET_ITEM(retval, 1, v);
+ }
+ v = PyLong_FromLong(SSL_CIPHER_get_bits(current, NULL));
+ if (v == NULL)
+ goto fail0;
+ PyTuple_SET_ITEM(retval, 2, v);
+ return retval;
fail0:
- Py_DECREF(retval);
- return NULL;
+ Py_DECREF(retval);
+ return NULL;
}
static void PySSL_dealloc(PySSLObject *self)
{
- if (self->peer_cert) /* Possible not to have one? */
- X509_free (self->peer_cert);
- if (self->ssl)
- SSL_free(self->ssl);
- if (self->ctx)
- SSL_CTX_free(self->ctx);
- Py_XDECREF(self->Socket);
- PyObject_Del(self);
+ if (self->peer_cert) /* Possible not to have one? */
+ X509_free (self->peer_cert);
+ if (self->ssl)
+ SSL_free(self->ssl);
+ if (self->ctx)
+ SSL_CTX_free(self->ctx);
+ Py_XDECREF(self->Socket);
+ PyObject_Del(self);
}
/* If the socket has a timeout, do a select()/poll() on the socket.
@@ -1097,141 +1097,141 @@
static int
check_socket_and_wait_for_timeout(PySocketSockObject *s, int writing)
{
- fd_set fds;
- struct timeval tv;
- int rc;
-
- /* Nothing to do unless we're in timeout mode (not non-blocking) */
- if (s->sock_timeout < 0.0)
- return SOCKET_IS_BLOCKING;
- else if (s->sock_timeout == 0.0)
- return SOCKET_IS_NONBLOCKING;
-
- /* Guard against closed socket */
- if (s->sock_fd < 0)
- return SOCKET_HAS_BEEN_CLOSED;
+ fd_set fds;
+ struct timeval tv;
+ int rc;
+
+ /* Nothing to do unless we're in timeout mode (not non-blocking) */
+ if (s->sock_timeout < 0.0)
+ return SOCKET_IS_BLOCKING;
+ else if (s->sock_timeout == 0.0)
+ return SOCKET_IS_NONBLOCKING;
+
+ /* Guard against closed socket */
+ if (s->sock_fd < 0)
+ return SOCKET_HAS_BEEN_CLOSED;
- /* Prefer poll, if available, since you can poll() any fd
- * which can't be done with select(). */
+ /* Prefer poll, if available, since you can poll() any fd
+ * which can't be done with select(). */
#ifdef HAVE_POLL
- {
- struct pollfd pollfd;
- int timeout;
-
- pollfd.fd = s->sock_fd;
- pollfd.events = writing ? POLLOUT : POLLIN;
-
- /* s->sock_timeout is in seconds, timeout in ms */
- timeout = (int)(s->sock_timeout * 1000 + 0.5);
- PySSL_BEGIN_ALLOW_THREADS
- rc = poll(&pollfd, 1, timeout);
- PySSL_END_ALLOW_THREADS
+ {
+ struct pollfd pollfd;
+ int timeout;
+
+ pollfd.fd = s->sock_fd;
+ pollfd.events = writing ? POLLOUT : POLLIN;
- goto normal_return;
- }
+ /* s->sock_timeout is in seconds, timeout in ms */
+ timeout = (int)(s->sock_timeout * 1000 + 0.5);
+ PySSL_BEGIN_ALLOW_THREADS
+ rc = poll(&pollfd, 1, timeout);
+ PySSL_END_ALLOW_THREADS
+
+ goto normal_return;
+ }
#endif
- /* Guard against socket too large for select*/
+ /* Guard against socket too large for select*/
#ifndef Py_SOCKET_FD_CAN_BE_GE_FD_SETSIZE
- if (s->sock_fd >= FD_SETSIZE)
- return SOCKET_TOO_LARGE_FOR_SELECT;
+ if (s->sock_fd >= FD_SETSIZE)
+ return SOCKET_TOO_LARGE_FOR_SELECT;
#endif
- /* Construct the arguments to select */
- tv.tv_sec = (int)s->sock_timeout;
- tv.tv_usec = (int)((s->sock_timeout - tv.tv_sec) * 1e6);
- FD_ZERO(&fds);
- FD_SET(s->sock_fd, &fds);
-
- /* See if the socket is ready */
- PySSL_BEGIN_ALLOW_THREADS
- if (writing)
- rc = select(s->sock_fd+1, NULL, &fds, NULL, &tv);
- else
- rc = select(s->sock_fd+1, &fds, NULL, NULL, &tv);
- PySSL_END_ALLOW_THREADS
+ /* Construct the arguments to select */
+ tv.tv_sec = (int)s->sock_timeout;
+ tv.tv_usec = (int)((s->sock_timeout - tv.tv_sec) * 1e6);
+ FD_ZERO(&fds);
+ FD_SET(s->sock_fd, &fds);
+
+ /* See if the socket is ready */
+ PySSL_BEGIN_ALLOW_THREADS
+ if (writing)
+ rc = select(s->sock_fd+1, NULL, &fds, NULL, &tv);
+ else
+ rc = select(s->sock_fd+1, &fds, NULL, NULL, &tv);
+ PySSL_END_ALLOW_THREADS
#ifdef HAVE_POLL
normal_return:
#endif
- /* Return SOCKET_TIMED_OUT on timeout, SOCKET_OPERATION_OK otherwise
- (when we are able to write or when there's something to read) */
- return rc == 0 ? SOCKET_HAS_TIMED_OUT : SOCKET_OPERATION_OK;
+ /* Return SOCKET_TIMED_OUT on timeout, SOCKET_OPERATION_OK otherwise
+ (when we are able to write or when there's something to read) */
+ return rc == 0 ? SOCKET_HAS_TIMED_OUT : SOCKET_OPERATION_OK;
}
static PyObject *PySSL_SSLwrite(PySSLObject *self, PyObject *args)
{
- char *data;
- int len;
- int count;
- int sockstate;
- int err;
- int nonblocking;
- PySocketSockObject *sock
- = (PySocketSockObject *) PyWeakref_GetObject(self->Socket);
-
- if (((PyObject*)sock) == Py_None) {
- _setSSLError("Underlying socket connection gone",
- PY_SSL_ERROR_NO_SOCKET, __FILE__, __LINE__);
- return NULL;
- }
-
- if (!PyArg_ParseTuple(args, "y#:write", &data, &count))
- return NULL;
-
- /* just in case the blocking state of the socket has been changed */
- nonblocking = (sock->sock_timeout >= 0.0);
- BIO_set_nbio(SSL_get_rbio(self->ssl), nonblocking);
- BIO_set_nbio(SSL_get_wbio(self->ssl), nonblocking);
-
- sockstate = check_socket_and_wait_for_timeout(sock, 1);
- if (sockstate == SOCKET_HAS_TIMED_OUT) {
- PyErr_SetString(PySSLErrorObject,
- "The write operation timed out");
- return NULL;
- } else if (sockstate == SOCKET_HAS_BEEN_CLOSED) {
- PyErr_SetString(PySSLErrorObject,
- "Underlying socket has been closed.");
- return NULL;
- } else if (sockstate == SOCKET_TOO_LARGE_FOR_SELECT) {
- PyErr_SetString(PySSLErrorObject,
- "Underlying socket too large for select().");
- return NULL;
- }
- do {
- err = 0;
- PySSL_BEGIN_ALLOW_THREADS
- len = SSL_write(self->ssl, data, count);
- err = SSL_get_error(self->ssl, len);
- PySSL_END_ALLOW_THREADS
- if(PyErr_CheckSignals()) {
- return NULL;
- }
- if (err == SSL_ERROR_WANT_READ) {
- sockstate =
- check_socket_and_wait_for_timeout(sock, 0);
- } else if (err == SSL_ERROR_WANT_WRITE) {
- sockstate =
- check_socket_and_wait_for_timeout(sock, 1);
- } else {
- sockstate = SOCKET_OPERATION_OK;
- }
- if (sockstate == SOCKET_HAS_TIMED_OUT) {
- PyErr_SetString(PySSLErrorObject,
- "The write operation timed out");
- return NULL;
- } else if (sockstate == SOCKET_HAS_BEEN_CLOSED) {
- PyErr_SetString(PySSLErrorObject,
- "Underlying socket has been closed.");
- return NULL;
- } else if (sockstate == SOCKET_IS_NONBLOCKING) {
- break;
- }
- } while (err == SSL_ERROR_WANT_READ || err == SSL_ERROR_WANT_WRITE);
- if (len > 0)
- return PyLong_FromLong(len);
- else
- return PySSL_SetError(self, len, __FILE__, __LINE__);
+ char *data;
+ int len;
+ int count;
+ int sockstate;
+ int err;
+ int nonblocking;
+ PySocketSockObject *sock
+ = (PySocketSockObject *) PyWeakref_GetObject(self->Socket);
+
+ if (((PyObject*)sock) == Py_None) {
+ _setSSLError("Underlying socket connection gone",
+ PY_SSL_ERROR_NO_SOCKET, __FILE__, __LINE__);
+ return NULL;
+ }
+
+ if (!PyArg_ParseTuple(args, "y#:write", &data, &count))
+ return NULL;
+
+ /* just in case the blocking state of the socket has been changed */
+ nonblocking = (sock->sock_timeout >= 0.0);
+ BIO_set_nbio(SSL_get_rbio(self->ssl), nonblocking);
+ BIO_set_nbio(SSL_get_wbio(self->ssl), nonblocking);
+
+ sockstate = check_socket_and_wait_for_timeout(sock, 1);
+ if (sockstate == SOCKET_HAS_TIMED_OUT) {
+ PyErr_SetString(PySSLErrorObject,
+ "The write operation timed out");
+ return NULL;
+ } else if (sockstate == SOCKET_HAS_BEEN_CLOSED) {
+ PyErr_SetString(PySSLErrorObject,
+ "Underlying socket has been closed.");
+ return NULL;
+ } else if (sockstate == SOCKET_TOO_LARGE_FOR_SELECT) {
+ PyErr_SetString(PySSLErrorObject,
+ "Underlying socket too large for select().");
+ return NULL;
+ }
+ do {
+ err = 0;
+ PySSL_BEGIN_ALLOW_THREADS
+ len = SSL_write(self->ssl, data, count);
+ err = SSL_get_error(self->ssl, len);
+ PySSL_END_ALLOW_THREADS
+ if(PyErr_CheckSignals()) {
+ return NULL;
+ }
+ if (err == SSL_ERROR_WANT_READ) {
+ sockstate =
+ check_socket_and_wait_for_timeout(sock, 0);
+ } else if (err == SSL_ERROR_WANT_WRITE) {
+ sockstate =
+ check_socket_and_wait_for_timeout(sock, 1);
+ } else {
+ sockstate = SOCKET_OPERATION_OK;
+ }
+ if (sockstate == SOCKET_HAS_TIMED_OUT) {
+ PyErr_SetString(PySSLErrorObject,
+ "The write operation timed out");
+ return NULL;
+ } else if (sockstate == SOCKET_HAS_BEEN_CLOSED) {
+ PyErr_SetString(PySSLErrorObject,
+ "Underlying socket has been closed.");
+ return NULL;
+ } else if (sockstate == SOCKET_IS_NONBLOCKING) {
+ break;
+ }
+ } while (err == SSL_ERROR_WANT_READ || err == SSL_ERROR_WANT_WRITE);
+ if (len > 0)
+ return PyLong_FromLong(len);
+ else
+ return PySSL_SetError(self, len, __FILE__, __LINE__);
}
PyDoc_STRVAR(PySSL_SSLwrite_doc,
@@ -1242,15 +1242,15 @@
static PyObject *PySSL_SSLpending(PySSLObject *self)
{
- int count = 0;
+ int count = 0;
- PySSL_BEGIN_ALLOW_THREADS
- count = SSL_pending(self->ssl);
- PySSL_END_ALLOW_THREADS
- if (count < 0)
- return PySSL_SetError(self, count, __FILE__, __LINE__);
- else
- return PyLong_FromLong(count);
+ PySSL_BEGIN_ALLOW_THREADS
+ count = SSL_pending(self->ssl);
+ PySSL_END_ALLOW_THREADS
+ if (count < 0)
+ return PySSL_SetError(self, count, __FILE__, __LINE__);
+ else
+ return PyLong_FromLong(count);
}
PyDoc_STRVAR(PySSL_SSLpending_doc,
@@ -1261,122 +1261,122 @@
static PyObject *PySSL_SSLread(PySSLObject *self, PyObject *args)
{
- PyObject *dest = NULL;
- Py_buffer buf;
- int buf_passed = 0;
- int count = -1;
- char *mem;
- /* XXX this should use Py_ssize_t */
- int len = 1024;
- int sockstate;
- int err;
- int nonblocking;
- PySocketSockObject *sock
- = (PySocketSockObject *) PyWeakref_GetObject(self->Socket);
-
- if (((PyObject*)sock) == Py_None) {
- _setSSLError("Underlying socket connection gone",
- PY_SSL_ERROR_NO_SOCKET, __FILE__, __LINE__);
- return NULL;
- }
-
- if (!PyArg_ParseTuple(args, "|Oi:read", &dest, &count))
- return NULL;
- if ((dest == NULL) || (dest == Py_None)) {
- if (!(dest = PyByteArray_FromStringAndSize((char *) 0, len)))
- return NULL;
- mem = PyByteArray_AS_STRING(dest);
- } else if (PyLong_Check(dest)) {
- len = PyLong_AS_LONG(dest);
- if (!(dest = PyByteArray_FromStringAndSize((char *) 0, len)))
- return NULL;
- mem = PyByteArray_AS_STRING(dest);
- } else {
- if (PyObject_GetBuffer(dest, &buf, PyBUF_CONTIG) < 0)
- return NULL;
- mem = buf.buf;
- len = buf.len;
- if ((count > 0) && (count <= len))
- len = count;
- buf_passed = 1;
- }
-
- /* just in case the blocking state of the socket has been changed */
- nonblocking = (sock->sock_timeout >= 0.0);
- BIO_set_nbio(SSL_get_rbio(self->ssl), nonblocking);
- BIO_set_nbio(SSL_get_wbio(self->ssl), nonblocking);
-
- /* first check if there are bytes ready to be read */
- PySSL_BEGIN_ALLOW_THREADS
- count = SSL_pending(self->ssl);
- PySSL_END_ALLOW_THREADS
-
- if (!count) {
- sockstate = check_socket_and_wait_for_timeout(sock, 0);
- if (sockstate == SOCKET_HAS_TIMED_OUT) {
- PyErr_SetString(PySSLErrorObject,
- "The read operation timed out");
- goto error;
- } else if (sockstate == SOCKET_TOO_LARGE_FOR_SELECT) {
- PyErr_SetString(PySSLErrorObject,
- "Underlying socket too large for select().");
- goto error;
- } else if (sockstate == SOCKET_HAS_BEEN_CLOSED) {
- count = 0;
- goto done;
- }
- }
- do {
- err = 0;
- PySSL_BEGIN_ALLOW_THREADS
- count = SSL_read(self->ssl, mem, len);
- err = SSL_get_error(self->ssl, count);
- PySSL_END_ALLOW_THREADS
- if (PyErr_CheckSignals())
- goto error;
- if (err == SSL_ERROR_WANT_READ) {
- sockstate =
- check_socket_and_wait_for_timeout(sock, 0);
- } else if (err == SSL_ERROR_WANT_WRITE) {
- sockstate =
- check_socket_and_wait_for_timeout(sock, 1);
- } else if ((err == SSL_ERROR_ZERO_RETURN) &&
- (SSL_get_shutdown(self->ssl) ==
- SSL_RECEIVED_SHUTDOWN))
- {
- count = 0;
- goto done;
- } else {
- sockstate = SOCKET_OPERATION_OK;
- }
- if (sockstate == SOCKET_HAS_TIMED_OUT) {
- PyErr_SetString(PySSLErrorObject,
- "The read operation timed out");
- goto error;
- } else if (sockstate == SOCKET_IS_NONBLOCKING) {
- break;
- }
- } while (err == SSL_ERROR_WANT_READ || err == SSL_ERROR_WANT_WRITE);
- if (count <= 0) {
- PySSL_SetError(self, count, __FILE__, __LINE__);
- goto error;
- }
+ PyObject *dest = NULL;
+ Py_buffer buf;
+ int buf_passed = 0;
+ int count = -1;
+ char *mem;
+ /* XXX this should use Py_ssize_t */
+ int len = 1024;
+ int sockstate;
+ int err;
+ int nonblocking;
+ PySocketSockObject *sock
+ = (PySocketSockObject *) PyWeakref_GetObject(self->Socket);
+
+ if (((PyObject*)sock) == Py_None) {
+ _setSSLError("Underlying socket connection gone",
+ PY_SSL_ERROR_NO_SOCKET, __FILE__, __LINE__);
+ return NULL;
+ }
+
+ if (!PyArg_ParseTuple(args, "|Oi:read", &dest, &count))
+ return NULL;
+ if ((dest == NULL) || (dest == Py_None)) {
+ if (!(dest = PyByteArray_FromStringAndSize((char *) 0, len)))
+ return NULL;
+ mem = PyByteArray_AS_STRING(dest);
+ } else if (PyLong_Check(dest)) {
+ len = PyLong_AS_LONG(dest);
+ if (!(dest = PyByteArray_FromStringAndSize((char *) 0, len)))
+ return NULL;
+ mem = PyByteArray_AS_STRING(dest);
+ } else {
+ if (PyObject_GetBuffer(dest, &buf, PyBUF_CONTIG) < 0)
+ return NULL;
+ mem = buf.buf;
+ len = buf.len;
+ if ((count > 0) && (count <= len))
+ len = count;
+ buf_passed = 1;
+ }
+
+ /* just in case the blocking state of the socket has been changed */
+ nonblocking = (sock->sock_timeout >= 0.0);
+ BIO_set_nbio(SSL_get_rbio(self->ssl), nonblocking);
+ BIO_set_nbio(SSL_get_wbio(self->ssl), nonblocking);
+
+ /* first check if there are bytes ready to be read */
+ PySSL_BEGIN_ALLOW_THREADS
+ count = SSL_pending(self->ssl);
+ PySSL_END_ALLOW_THREADS
+
+ if (!count) {
+ sockstate = check_socket_and_wait_for_timeout(sock, 0);
+ if (sockstate == SOCKET_HAS_TIMED_OUT) {
+ PyErr_SetString(PySSLErrorObject,
+ "The read operation timed out");
+ goto error;
+ } else if (sockstate == SOCKET_TOO_LARGE_FOR_SELECT) {
+ PyErr_SetString(PySSLErrorObject,
+ "Underlying socket too large for select().");
+ goto error;
+ } else if (sockstate == SOCKET_HAS_BEEN_CLOSED) {
+ count = 0;
+ goto done;
+ }
+ }
+ do {
+ err = 0;
+ PySSL_BEGIN_ALLOW_THREADS
+ count = SSL_read(self->ssl, mem, len);
+ err = SSL_get_error(self->ssl, count);
+ PySSL_END_ALLOW_THREADS
+ if (PyErr_CheckSignals())
+ goto error;
+ if (err == SSL_ERROR_WANT_READ) {
+ sockstate =
+ check_socket_and_wait_for_timeout(sock, 0);
+ } else if (err == SSL_ERROR_WANT_WRITE) {
+ sockstate =
+ check_socket_and_wait_for_timeout(sock, 1);
+ } else if ((err == SSL_ERROR_ZERO_RETURN) &&
+ (SSL_get_shutdown(self->ssl) ==
+ SSL_RECEIVED_SHUTDOWN))
+ {
+ count = 0;
+ goto done;
+ } else {
+ sockstate = SOCKET_OPERATION_OK;
+ }
+ if (sockstate == SOCKET_HAS_TIMED_OUT) {
+ PyErr_SetString(PySSLErrorObject,
+ "The read operation timed out");
+ goto error;
+ } else if (sockstate == SOCKET_IS_NONBLOCKING) {
+ break;
+ }
+ } while (err == SSL_ERROR_WANT_READ || err == SSL_ERROR_WANT_WRITE);
+ if (count <= 0) {
+ PySSL_SetError(self, count, __FILE__, __LINE__);
+ goto error;
+ }
done:
- if (!buf_passed) {
- PyObject *res = PyBytes_FromStringAndSize(mem, count);
- Py_DECREF(dest);
- return res;
- } else {
- PyBuffer_Release(&buf);
- return PyLong_FromLong(count);
- }
+ if (!buf_passed) {
+ PyObject *res = PyBytes_FromStringAndSize(mem, count);
+ Py_DECREF(dest);
+ return res;
+ } else {
+ PyBuffer_Release(&buf);
+ return PyLong_FromLong(count);
+ }
error:
- if (!buf_passed) {
- Py_DECREF(dest);
- } else {
- PyBuffer_Release(&buf);
- }
- return NULL;
+ if (!buf_passed) {
+ Py_DECREF(dest);
+ } else {
+ PyBuffer_Release(&buf);
+ }
+ return NULL;
}
PyDoc_STRVAR(PySSL_SSLread_doc,
@@ -1386,84 +1386,84 @@
static PyObject *PySSL_SSLshutdown(PySSLObject *self)
{
- int err, ssl_err, sockstate, nonblocking;
- int zeros = 0;
- PySocketSockObject *sock
- = (PySocketSockObject *) PyWeakref_GetObject(self->Socket);
-
- /* Guard against closed socket */
- if ((((PyObject*)sock) == Py_None) || (sock->sock_fd < 0)) {
- _setSSLError("Underlying socket connection gone",
- PY_SSL_ERROR_NO_SOCKET, __FILE__, __LINE__);
- return NULL;
- }
-
- /* Just in case the blocking state of the socket has been changed */
- nonblocking = (sock->sock_timeout >= 0.0);
- BIO_set_nbio(SSL_get_rbio(self->ssl), nonblocking);
- BIO_set_nbio(SSL_get_wbio(self->ssl), nonblocking);
-
- while (1) {
- PySSL_BEGIN_ALLOW_THREADS
- /* Disable read-ahead so that unwrap can work correctly.
- * Otherwise OpenSSL might read in too much data,
- * eating clear text data that happens to be
- * transmitted after the SSL shutdown.
- * Should be safe to call repeatedly everytime this
- * function is used and the shutdown_seen_zero != 0
- * condition is met.
- */
- if (self->shutdown_seen_zero)
- SSL_set_read_ahead(self->ssl, 0);
- err = SSL_shutdown(self->ssl);
- PySSL_END_ALLOW_THREADS
- /* If err == 1, a secure shutdown with SSL_shutdown() is complete */
- if (err > 0)
- break;
- if (err == 0) {
- /* Don't loop endlessly; instead preserve legacy
- behaviour of trying SSL_shutdown() only twice.
- This looks necessary for OpenSSL < 0.9.8m */
- if (++zeros > 1)
- break;
- /* Shutdown was sent, now try receiving */
- self->shutdown_seen_zero = 1;
- continue;
- }
-
- /* Possibly retry shutdown until timeout or failure */
- ssl_err = SSL_get_error(self->ssl, err);
- if (ssl_err == SSL_ERROR_WANT_READ)
- sockstate = check_socket_and_wait_for_timeout(sock, 0);
- else if (ssl_err == SSL_ERROR_WANT_WRITE)
- sockstate = check_socket_and_wait_for_timeout(sock, 1);
- else
- break;
- if (sockstate == SOCKET_HAS_TIMED_OUT) {
- if (ssl_err == SSL_ERROR_WANT_READ)
- PyErr_SetString(PySSLErrorObject,
- "The read operation timed out");
- else
- PyErr_SetString(PySSLErrorObject,
- "The write operation timed out");
- return NULL;
- }
- else if (sockstate == SOCKET_TOO_LARGE_FOR_SELECT) {
- PyErr_SetString(PySSLErrorObject,
- "Underlying socket too large for select().");
- return NULL;
- }
- else if (sockstate != SOCKET_OPERATION_OK)
- /* Retain the SSL error code */
- break;
- }
-
- if (err < 0)
- return PySSL_SetError(self, err, __FILE__, __LINE__);
- else {
- Py_INCREF(sock);
- return (PyObject *) sock;
- }
+ int err, ssl_err, sockstate, nonblocking;
+ int zeros = 0;
+ PySocketSockObject *sock
+ = (PySocketSockObject *) PyWeakref_GetObject(self->Socket);
+
+ /* Guard against closed socket */
+ if ((((PyObject*)sock) == Py_None) || (sock->sock_fd < 0)) {
+ _setSSLError("Underlying socket connection gone",
+ PY_SSL_ERROR_NO_SOCKET, __FILE__, __LINE__);
+ return NULL;
+ }
+
+ /* Just in case the blocking state of the socket has been changed */
+ nonblocking = (sock->sock_timeout >= 0.0);
+ BIO_set_nbio(SSL_get_rbio(self->ssl), nonblocking);
+ BIO_set_nbio(SSL_get_wbio(self->ssl), nonblocking);
+
+ while (1) {
+ PySSL_BEGIN_ALLOW_THREADS
+ /* Disable read-ahead so that unwrap can work correctly.
+ * Otherwise OpenSSL might read in too much data,
+ * eating clear text data that happens to be
+ * transmitted after the SSL shutdown.
+ * Should be safe to call repeatedly everytime this
+ * function is used and the shutdown_seen_zero != 0
+ * condition is met.
+ */
+ if (self->shutdown_seen_zero)
+ SSL_set_read_ahead(self->ssl, 0);
+ err = SSL_shutdown(self->ssl);
+ PySSL_END_ALLOW_THREADS
+ /* If err == 1, a secure shutdown with SSL_shutdown() is complete */
+ if (err > 0)
+ break;
+ if (err == 0) {
+ /* Don't loop endlessly; instead preserve legacy
+ behaviour of trying SSL_shutdown() only twice.
+ This looks necessary for OpenSSL < 0.9.8m */
+ if (++zeros > 1)
+ break;
+ /* Shutdown was sent, now try receiving */
+ self->shutdown_seen_zero = 1;
+ continue;
+ }
+
+ /* Possibly retry shutdown until timeout or failure */
+ ssl_err = SSL_get_error(self->ssl, err);
+ if (ssl_err == SSL_ERROR_WANT_READ)
+ sockstate = check_socket_and_wait_for_timeout(sock, 0);
+ else if (ssl_err == SSL_ERROR_WANT_WRITE)
+ sockstate = check_socket_and_wait_for_timeout(sock, 1);
+ else
+ break;
+ if (sockstate == SOCKET_HAS_TIMED_OUT) {
+ if (ssl_err == SSL_ERROR_WANT_READ)
+ PyErr_SetString(PySSLErrorObject,
+ "The read operation timed out");
+ else
+ PyErr_SetString(PySSLErrorObject,
+ "The write operation timed out");
+ return NULL;
+ }
+ else if (sockstate == SOCKET_TOO_LARGE_FOR_SELECT) {
+ PyErr_SetString(PySSLErrorObject,
+ "Underlying socket too large for select().");
+ return NULL;
+ }
+ else if (sockstate != SOCKET_OPERATION_OK)
+ /* Retain the SSL error code */
+ break;
+ }
+
+ if (err < 0)
+ return PySSL_SetError(self, err, __FILE__, __LINE__);
+ else {
+ Py_INCREF(sock);
+ return (PyObject *) sock;
+ }
}
PyDoc_STRVAR(PySSL_SSLshutdown_doc,
@@ -1474,51 +1474,51 @@
static PyMethodDef PySSLMethods[] = {
- {"do_handshake", (PyCFunction)PySSL_SSLdo_handshake, METH_NOARGS},
- {"write", (PyCFunction)PySSL_SSLwrite, METH_VARARGS,
- PySSL_SSLwrite_doc},
- {"read", (PyCFunction)PySSL_SSLread, METH_VARARGS,
- PySSL_SSLread_doc},
- {"pending", (PyCFunction)PySSL_SSLpending, METH_NOARGS,
- PySSL_SSLpending_doc},
- {"peer_certificate", (PyCFunction)PySSL_peercert, METH_VARARGS,
- PySSL_peercert_doc},
- {"cipher", (PyCFunction)PySSL_cipher, METH_NOARGS},
- {"shutdown", (PyCFunction)PySSL_SSLshutdown, METH_NOARGS,
- PySSL_SSLshutdown_doc},
- {NULL, NULL}
+ {"do_handshake", (PyCFunction)PySSL_SSLdo_handshake, METH_NOARGS},
+ {"write", (PyCFunction)PySSL_SSLwrite, METH_VARARGS,
+ PySSL_SSLwrite_doc},
+ {"read", (PyCFunction)PySSL_SSLread, METH_VARARGS,
+ PySSL_SSLread_doc},
+ {"pending", (PyCFunction)PySSL_SSLpending, METH_NOARGS,
+ PySSL_SSLpending_doc},
+ {"peer_certificate", (PyCFunction)PySSL_peercert, METH_VARARGS,
+ PySSL_peercert_doc},
+ {"cipher", (PyCFunction)PySSL_cipher, METH_NOARGS},
+ {"shutdown", (PyCFunction)PySSL_SSLshutdown, METH_NOARGS,
+ PySSL_SSLshutdown_doc},
+ {NULL, NULL}
};
static PyTypeObject PySSL_Type = {
- PyVarObject_HEAD_INIT(NULL, 0)
- "ssl.SSLContext", /*tp_name*/
- sizeof(PySSLObject), /*tp_basicsize*/
- 0, /*tp_itemsize*/
- /* methods */
- (destructor)PySSL_dealloc, /*tp_dealloc*/
- 0, /*tp_print*/
- 0, /*tp_getattr*/
- 0, /*tp_setattr*/
- 0, /*tp_reserved*/
- 0, /*tp_repr*/
- 0, /*tp_as_number*/
- 0, /*tp_as_sequence*/
- 0, /*tp_as_mapping*/
- 0, /*tp_hash*/
- 0, /*tp_call*/
- 0, /*tp_str*/
- 0, /*tp_getattro*/
- 0, /*tp_setattro*/
- 0, /*tp_as_buffer*/
- Py_TPFLAGS_DEFAULT, /*tp_flags*/
- 0, /*tp_doc*/
- 0, /*tp_traverse*/
- 0, /*tp_clear*/
- 0, /*tp_richcompare*/
- 0, /*tp_weaklistoffset*/
- 0, /*tp_iter*/
- 0, /*tp_iternext*/
- PySSLMethods, /*tp_methods*/
+ PyVarObject_HEAD_INIT(NULL, 0)
+ "ssl.SSLContext", /*tp_name*/
+ sizeof(PySSLObject), /*tp_basicsize*/
+ 0, /*tp_itemsize*/
+ /* methods */
+ (destructor)PySSL_dealloc, /*tp_dealloc*/
+ 0, /*tp_print*/
+ 0, /*tp_getattr*/
+ 0, /*tp_setattr*/
+ 0, /*tp_reserved*/
+ 0, /*tp_repr*/
+ 0, /*tp_as_number*/
+ 0, /*tp_as_sequence*/
+ 0, /*tp_as_mapping*/
+ 0, /*tp_hash*/
+ 0, /*tp_call*/
+ 0, /*tp_str*/
+ 0, /*tp_getattro*/
+ 0, /*tp_setattro*/
+ 0, /*tp_as_buffer*/
+ Py_TPFLAGS_DEFAULT, /*tp_flags*/
+ 0, /*tp_doc*/
+ 0, /*tp_traverse*/
+ 0, /*tp_clear*/
+ 0, /*tp_richcompare*/
+ 0, /*tp_weaklistoffset*/
+ 0, /*tp_iter*/
+ 0, /*tp_iternext*/
+ PySSLMethods, /*tp_methods*/
};
#ifdef HAVE_OPENSSL_RAND
@@ -1532,7 +1532,7 @@
double entropy;
if (!PyArg_ParseTuple(args, "s#d:RAND_add", &buf, &len, &entropy))
- return NULL;
+ return NULL;
RAND_add(buf, len, entropy);
Py_INCREF(Py_None);
return Py_None;
@@ -1563,15 +1563,15 @@
int bytes;
if (!PyUnicode_Check(arg))
- return PyErr_Format(PyExc_TypeError,
- "RAND_egd() expected string, found %s",
- Py_TYPE(arg)->tp_name);
+ return PyErr_Format(PyExc_TypeError,
+ "RAND_egd() expected string, found %s",
+ Py_TYPE(arg)->tp_name);
bytes = RAND_egd(_PyUnicode_AsString(arg));
if (bytes == -1) {
- PyErr_SetString(PySSLErrorObject,
- "EGD connection failed or EGD did not return "
- "enough data to seed the PRNG");
- return NULL;
+ PyErr_SetString(PySSLErrorObject,
+ "EGD connection failed or EGD did not return "
+ "enough data to seed the PRNG");
+ return NULL;
}
return PyLong_FromLong(bytes);
}
@@ -1590,19 +1590,19 @@
/* List of functions exported by this module. */
static PyMethodDef PySSL_methods[] = {
- {"sslwrap", PySSL_sslwrap,
- METH_VARARGS, ssl_doc},
- {"_test_decode_cert", PySSL_test_decode_certificate,
- METH_VARARGS},
+ {"sslwrap", PySSL_sslwrap,
+ METH_VARARGS, ssl_doc},
+ {"_test_decode_cert", PySSL_test_decode_certificate,
+ METH_VARARGS},
#ifdef HAVE_OPENSSL_RAND
- {"RAND_add", PySSL_RAND_add, METH_VARARGS,
- PySSL_RAND_add_doc},
- {"RAND_egd", PySSL_RAND_egd, METH_O,
- PySSL_RAND_egd_doc},
- {"RAND_status", (PyCFunction)PySSL_RAND_status, METH_NOARGS,
- PySSL_RAND_status_doc},
+ {"RAND_add", PySSL_RAND_add, METH_VARARGS,
+ PySSL_RAND_add_doc},
+ {"RAND_egd", PySSL_RAND_egd, METH_O,
+ PySSL_RAND_egd_doc},
+ {"RAND_status", (PyCFunction)PySSL_RAND_status, METH_NOARGS,
+ PySSL_RAND_status_doc},
#endif
- {NULL, NULL} /* Sentinel */
+ {NULL, NULL} /* Sentinel */
};
@@ -1614,66 +1614,66 @@
static PyThread_type_lock *_ssl_locks = NULL;
static unsigned long _ssl_thread_id_function (void) {
- return PyThread_get_thread_ident();
+ return PyThread_get_thread_ident();
}
static void _ssl_thread_locking_function
- (int mode, int n, const char *file, int line) {
- /* this function is needed to perform locking on shared data
- structures. (Note that OpenSSL uses a number of global data
- structures that will be implicitly shared whenever multiple
- threads use OpenSSL.) Multi-threaded applications will
- crash at random if it is not set.
-
- locking_function() must be able to handle up to
- CRYPTO_num_locks() different mutex locks. It sets the n-th
- lock if mode & CRYPTO_LOCK, and releases it otherwise.
-
- file and line are the file number of the function setting the
- lock. They can be useful for debugging.
- */
-
- if ((_ssl_locks == NULL) ||
- (n < 0) || ((unsigned)n >= _ssl_locks_count))
- return;
-
- if (mode & CRYPTO_LOCK) {
- PyThread_acquire_lock(_ssl_locks[n], 1);
- } else {
- PyThread_release_lock(_ssl_locks[n]);
- }
+ (int mode, int n, const char *file, int line) {
+ /* this function is needed to perform locking on shared data
+ structures. (Note that OpenSSL uses a number of global data
+ structures that will be implicitly shared whenever multiple
+ threads use OpenSSL.) Multi-threaded applications will
+ crash at random if it is not set.
+
+ locking_function() must be able to handle up to
+ CRYPTO_num_locks() different mutex locks. It sets the n-th
+ lock if mode & CRYPTO_LOCK, and releases it otherwise.
+
+ file and line are the file number of the function setting the
+ lock. They can be useful for debugging.
+ */
+
+ if ((_ssl_locks == NULL) ||
+ (n < 0) || ((unsigned)n >= _ssl_locks_count))
+ return;
+
+ if (mode & CRYPTO_LOCK) {
+ PyThread_acquire_lock(_ssl_locks[n], 1);
+ } else {
+ PyThread_release_lock(_ssl_locks[n]);
+ }
}
static int _setup_ssl_threads(void) {
- unsigned int i;
+ unsigned int i;
- if (_ssl_locks == NULL) {
- _ssl_locks_count = CRYPTO_num_locks();
- _ssl_locks = (PyThread_type_lock *)
- malloc(sizeof(PyThread_type_lock) * _ssl_locks_count);
- if (_ssl_locks == NULL)
- return 0;
- memset(_ssl_locks, 0,
- sizeof(PyThread_type_lock) * _ssl_locks_count);
- for (i = 0; i < _ssl_locks_count; i++) {
- _ssl_locks[i] = PyThread_allocate_lock();
- if (_ssl_locks[i] == NULL) {
- unsigned int j;
- for (j = 0; j < i; j++) {
- PyThread_free_lock(_ssl_locks[j]);
- }
- free(_ssl_locks);
- return 0;
- }
- }
- CRYPTO_set_locking_callback(_ssl_thread_locking_function);
- CRYPTO_set_id_callback(_ssl_thread_id_function);
- }
- return 1;
+ if (_ssl_locks == NULL) {
+ _ssl_locks_count = CRYPTO_num_locks();
+ _ssl_locks = (PyThread_type_lock *)
+ malloc(sizeof(PyThread_type_lock) * _ssl_locks_count);
+ if (_ssl_locks == NULL)
+ return 0;
+ memset(_ssl_locks, 0,
+ sizeof(PyThread_type_lock) * _ssl_locks_count);
+ for (i = 0; i < _ssl_locks_count; i++) {
+ _ssl_locks[i] = PyThread_allocate_lock();
+ if (_ssl_locks[i] == NULL) {
+ unsigned int j;
+ for (j = 0; j < i; j++) {
+ PyThread_free_lock(_ssl_locks[j]);
+ }
+ free(_ssl_locks);
+ return 0;
+ }
+ }
+ CRYPTO_set_locking_callback(_ssl_thread_locking_function);
+ CRYPTO_set_id_callback(_ssl_thread_id_function);
+ }
+ return 1;
}
-#endif /* def HAVE_THREAD */
+#endif /* def HAVE_THREAD */
PyDoc_STRVAR(module_doc,
"Implementation module for SSL socket operations. See the socket module\n\
@@ -1681,94 +1681,94 @@
static struct PyModuleDef _sslmodule = {
- PyModuleDef_HEAD_INIT,
- "_ssl",
- module_doc,
- -1,
- PySSL_methods,
- NULL,
- NULL,
- NULL,
- NULL
+ PyModuleDef_HEAD_INIT,
+ "_ssl",
+ module_doc,
+ -1,
+ PySSL_methods,
+ NULL,
+ NULL,
+ NULL,
+ NULL
};
PyMODINIT_FUNC
PyInit__ssl(void)
{
- PyObject *m, *d;
- PySocketModule_APIObject *socket_api;
+ PyObject *m, *d;
+ PySocketModule_APIObject *socket_api;
- if (PyType_Ready(&PySSL_Type) < 0)
- return NULL;
+ if (PyType_Ready(&PySSL_Type) < 0)
+ return NULL;
- m = PyModule_Create(&_sslmodule);
- if (m == NULL)
- return NULL;
- d = PyModule_GetDict(m);
-
- /* Load _socket module and its C API */
- socket_api = PySocketModule_ImportModuleAndAPI();
- if (!socket_api)
- return NULL;
- PySocketModule = *socket_api;
-
- /* Init OpenSSL */
- SSL_load_error_strings();
- SSL_library_init();
+ m = PyModule_Create(&_sslmodule);
+ if (m == NULL)
+ return NULL;
+ d = PyModule_GetDict(m);
+
+ /* Load _socket module and its C API */
+ socket_api = PySocketModule_ImportModuleAndAPI();
+ if (!socket_api)
+ return NULL;
+ PySocketModule = *socket_api;
+
+ /* Init OpenSSL */
+ SSL_load_error_strings();
+ SSL_library_init();
#ifdef WITH_THREAD
- /* note that this will start threading if not already started */
- if (!_setup_ssl_threads()) {
- return NULL;
- }
+ /* note that this will start threading if not already started */
+ if (!_setup_ssl_threads()) {
+ return NULL;
+ }
#endif
- OpenSSL_add_all_algorithms();
+ OpenSSL_add_all_algorithms();
- /* Add symbols to module dict */
- PySSLErrorObject = PyErr_NewException("ssl.SSLError",
- PySocketModule.error,
- NULL);
- if (PySSLErrorObject == NULL)
- return NULL;
- if (PyDict_SetItemString(d, "SSLError", PySSLErrorObject) != 0)
- return NULL;
- if (PyDict_SetItemString(d, "SSLType",
- (PyObject *)&PySSL_Type) != 0)
- return NULL;
- PyModule_AddIntConstant(m, "SSL_ERROR_ZERO_RETURN",
- PY_SSL_ERROR_ZERO_RETURN);
- PyModule_AddIntConstant(m, "SSL_ERROR_WANT_READ",
- PY_SSL_ERROR_WANT_READ);
- PyModule_AddIntConstant(m, "SSL_ERROR_WANT_WRITE",
- PY_SSL_ERROR_WANT_WRITE);
- PyModule_AddIntConstant(m, "SSL_ERROR_WANT_X509_LOOKUP",
- PY_SSL_ERROR_WANT_X509_LOOKUP);
- PyModule_AddIntConstant(m, "SSL_ERROR_SYSCALL",
- PY_SSL_ERROR_SYSCALL);
- PyModule_AddIntConstant(m, "SSL_ERROR_SSL",
- PY_SSL_ERROR_SSL);
- PyModule_AddIntConstant(m, "SSL_ERROR_WANT_CONNECT",
- PY_SSL_ERROR_WANT_CONNECT);
- /* non ssl.h errorcodes */
- PyModule_AddIntConstant(m, "SSL_ERROR_EOF",
- PY_SSL_ERROR_EOF);
- PyModule_AddIntConstant(m, "SSL_ERROR_INVALID_ERROR_CODE",
- PY_SSL_ERROR_INVALID_ERROR_CODE);
- /* cert requirements */
- PyModule_AddIntConstant(m, "CERT_NONE",
- PY_SSL_CERT_NONE);
- PyModule_AddIntConstant(m, "CERT_OPTIONAL",
- PY_SSL_CERT_OPTIONAL);
- PyModule_AddIntConstant(m, "CERT_REQUIRED",
- PY_SSL_CERT_REQUIRED);
-
- /* protocol versions */
- PyModule_AddIntConstant(m, "PROTOCOL_SSLv2",
- PY_SSL_VERSION_SSL2);
- PyModule_AddIntConstant(m, "PROTOCOL_SSLv3",
- PY_SSL_VERSION_SSL3);
- PyModule_AddIntConstant(m, "PROTOCOL_SSLv23",
- PY_SSL_VERSION_SSL23);
- PyModule_AddIntConstant(m, "PROTOCOL_TLSv1",
- PY_SSL_VERSION_TLS1);
- return m;
+ /* Add symbols to module dict */
+ PySSLErrorObject = PyErr_NewException("ssl.SSLError",
+ PySocketModule.error,
+ NULL);
+ if (PySSLErrorObject == NULL)
+ return NULL;
+ if (PyDict_SetItemString(d, "SSLError", PySSLErrorObject) != 0)
+ return NULL;
+ if (PyDict_SetItemString(d, "SSLType",
+ (PyObject *)&PySSL_Type) != 0)
+ return NULL;
+ PyModule_AddIntConstant(m, "SSL_ERROR_ZERO_RETURN",
+ PY_SSL_ERROR_ZERO_RETURN);
+ PyModule_AddIntConstant(m, "SSL_ERROR_WANT_READ",
+ PY_SSL_ERROR_WANT_READ);
+ PyModule_AddIntConstant(m, "SSL_ERROR_WANT_WRITE",
+ PY_SSL_ERROR_WANT_WRITE);
+ PyModule_AddIntConstant(m, "SSL_ERROR_WANT_X509_LOOKUP",
+ PY_SSL_ERROR_WANT_X509_LOOKUP);
+ PyModule_AddIntConstant(m, "SSL_ERROR_SYSCALL",
+ PY_SSL_ERROR_SYSCALL);
+ PyModule_AddIntConstant(m, "SSL_ERROR_SSL",
+ PY_SSL_ERROR_SSL);
+ PyModule_AddIntConstant(m, "SSL_ERROR_WANT_CONNECT",
+ PY_SSL_ERROR_WANT_CONNECT);
+ /* non ssl.h errorcodes */
+ PyModule_AddIntConstant(m, "SSL_ERROR_EOF",
+ PY_SSL_ERROR_EOF);
+ PyModule_AddIntConstant(m, "SSL_ERROR_INVALID_ERROR_CODE",
+ PY_SSL_ERROR_INVALID_ERROR_CODE);
+ /* cert requirements */
+ PyModule_AddIntConstant(m, "CERT_NONE",
+ PY_SSL_CERT_NONE);
+ PyModule_AddIntConstant(m, "CERT_OPTIONAL",
+ PY_SSL_CERT_OPTIONAL);
+ PyModule_AddIntConstant(m, "CERT_REQUIRED",
+ PY_SSL_CERT_REQUIRED);
+
+ /* protocol versions */
+ PyModule_AddIntConstant(m, "PROTOCOL_SSLv2",
+ PY_SSL_VERSION_SSL2);
+ PyModule_AddIntConstant(m, "PROTOCOL_SSLv3",
+ PY_SSL_VERSION_SSL3);
+ PyModule_AddIntConstant(m, "PROTOCOL_SSLv23",
+ PY_SSL_VERSION_SSL23);
+ PyModule_AddIntConstant(m, "PROTOCOL_TLSv1",
+ PY_SSL_VERSION_TLS1);
+ return m;
}
More information about the Python-checkins
mailing list