[Python-checkins] cpython: Update OS X installer documentation files for 3.5.0
ned.deily
python-checkins at python.org
Sat Nov 15 04:00:08 CET 2014
https://hg.python.org/cpython/rev/e79c6ea48b83
changeset: 93492:e79c6ea48b83
parent: 93490:6270a2181ed3
user: Ned Deily <nad at acm.org>
date: Fri Nov 14 18:41:56 2014 -0800
summary:
Update OS X installer documentation files for 3.5.0
files:
Mac/BuildScript/resources/ReadMe.txt | 97 +-------------
Mac/BuildScript/resources/Welcome.rtf | 22 +--
Mac/BuildScript/resources/readme.rtf | 51 +++++++
3 files changed, 65 insertions(+), 105 deletions(-)
diff --git a/Mac/BuildScript/resources/ReadMe.txt b/Mac/BuildScript/resources/ReadMe.txt
--- a/Mac/BuildScript/resources/ReadMe.txt
+++ b/Mac/BuildScript/resources/ReadMe.txt
@@ -1,92 +1,13 @@
-This package will install Python $FULL_VERSION for Mac OS X
-$MACOSX_DEPLOYMENT_TARGET for the following architecture(s):
-$ARCHITECTURES.
+This package will install Python $FULL_VERSION for Mac OS X $MACOSX_DEPLOYMENT_TARGET for the following architecture(s): $ARCHITECTURES.
- **** IMPORTANT ****
+=============================
+Update your version of Tcl/Tk to use IDLE or other Tk applications
+=============================
-Installing on OS X 10.8 (Mountain Lion) or later systems
-========================================================
+To use IDLE or other programs that use the Tkinter graphical user interface toolkit, you need to install a newer third-party version of the Tcl/Tk frameworks. Visit https://www.python.org/download/mac/tcltk/ for current information about supported and recommended versions of Tcl/Tk for this version of Python and of Mac OS X.
-If you are attempting to install on an OS X 10.8+ system, you may
-see a message that Python can't be installed because it is from an
-unidentified developer. This is because this Python installer
-package is not yet compatible with the Gatekeeper security feature
-introduced in OS X 10.8. To allow Python to be installed, you
-can override the Gatekeeper policy for this install. In the Finder,
-instead of double-clicking, control-click or right click the "Python"
-installer package icon. Then select "Open using ... Installer" from
-the contextual menu that appears.
+=============================
+Python 3 and Python 2 Co-existence
+=============================
- **** IMPORTANT ****
-
-Update your version of Tcl/Tk to use IDLE or other Tk applications
-==================================================================
-
-To use IDLE or other programs that use the Tkinter graphical user
-interface toolkit, you may need to install a newer third-party version
-of the Tcl/Tk frameworks. Visit http://www.python.org/download/mac/tcltk/
-for current information about supported and recommended versions of
-Tcl/Tk for this version of Python and of Mac OS X.
-
- **NEW* As of Python 3.4.0b1:
-
-New Installation Options and Defaults
-=====================================
-
-The Python installer now includes an option to automatically install
-or upgrade pip, a tool for installing and managing Python packages.
-This option is enabled by default and no Internet access is required.
-If you do not want the installer to do this, select the "Customize"
-option at the "Installation Type" step and uncheck the "Install or
-ugprade pip" option.
-
-To make it easier to use scripts installed by third-party Python
-packages, with pip or by other means, the "Shell profile updater"
-option is now enabled by default, as has been the case with Python
-2.7.x installers. You can also turn this option off by selecting
-"Customize" and unchecking the "Shell profile updater" option. You
-can also update your shell profile later by launching the "Update
-Shell Profile" command found in the /Applications/Python $VERSION
-folder. You may need to start a new terminal window for the
-changes to take effect.
-
-Python.org Python $VERSION and 2.7.x versions can both be installed and
-will not conflict. Command names for Python 3 contain a 3 in them,
-python3 (or python$VERSION), idle3 (or idle$VERSION), pip3 (or pip$VERSION), etc.
-Python 2.7 command names contain a 2 or no digit: python2 (or
-python2.7 or python), idle2 (or idle2.7 or idle), etc. If you want to
-use pip with Python 2.7.x, you will need to download and install a
-separate copy of it from the Python Package Index
-(https://pypi.python.org/pypi).
-
-Using this version of Python on OS X
-====================================
-
-Python consists of the Python programming language interpreter, plus
-a set of programs to allow easy access to it for Mac users including
-an integrated development environment, IDLE, plus a set of pre-built
-extension modules that open up specific Macintosh technologies to
-Python programs.
-
-The installer puts applications, an "Update Shell Profile" command,
-and a link to the optionally installed Python Documentation into the
-"Python $VERSION" subfolder of the system Applications folder,
-and puts the underlying machinery into the folder
-$PYTHONFRAMEWORKINSTALLDIR. It can
-optionally place links to the command-line tools in /usr/local/bin as
-well. Double-click on the "Update Shell Profile" command to add the
-"bin" directory inside the framework to your shell's search path.
-
-You must install onto your current boot disk, even though the
-installer may not enforce this, otherwise things will not work.
-
-You can verify the integrity of the disk image file containing the
-installer package and this ReadMe file by comparing its md5 checksum
-and size with the values published on the release page linked at
-http://www.python.org/download/
-
-Installation requires approximately $INSTALL_SIZE MB of disk space,
-ignore the message that it will take zero bytes.
-
-More information on Python in general can be found at
-http://www.python.org.
+Python.org Python $VERSION and 2.7.x versions can both be installed on your system and will not conflict. Command names for Python 3 contain a 3 in them, python3 (or python$VERSION), idle3 (or idle$VERSION), pip3 (or pip$VERSION), etc. Python 2.7 command names contain a 2 or no digit: python2 (or python2.7 or python), idle2 (or idle2.7 or idle), etc. If you want to use pip with Python 2.7.x, download and install a separate copy of it from the Python Package Index (https://pypi.python.org/pypi/pip/).
diff --git a/Mac/BuildScript/resources/Welcome.rtf b/Mac/BuildScript/resources/Welcome.rtf
--- a/Mac/BuildScript/resources/Welcome.rtf
+++ b/Mac/BuildScript/resources/Welcome.rtf
@@ -1,7 +1,7 @@
-{\rtf1\ansi\ansicpg1252\cocoartf1187\cocoasubrtf400
-\cocoascreenfonts1{\fonttbl\f0\fswiss\fcharset0 Helvetica;\f1\fmodern\fcharset0 CourierNewPSMT;}
+{\rtf1\ansi\ansicpg1252\cocoartf1343\cocoasubrtf140
+\cocoascreenfonts1{\fonttbl\f0\fswiss\fcharset0 Helvetica;}
{\colortbl;\red255\green255\blue255;}
-\paperw11905\paperh16837\margl1440\margr1440\vieww9640\viewh10620\viewkind0
+\paperw11905\paperh16837\margl1440\margr1440\vieww12200\viewh10880\viewkind0
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640
\f0\fs24 \cf0 This package will install
@@ -14,19 +14,7 @@
\b Python for Mac OS X
\b0 consists of the Python programming language interpreter, plus a set of programs to allow easy access to it for Mac OS X users including an integrated development environment
\b IDLE
-\b0 and a set of pre-built extension modules that open up specific Macintosh technologies to Python programs.\
-\
-
-\b NEW for Python 3.4:
-\b0 This package now updates your shell profile by default to make $FULL_VERSION the default Python 3 version. This version can co-exist with other installed versions of Python 3 and Python 2. This package also installs a version of
-\f1 pip
-\f0 , the recommended tool for installing and managing Python packages. Type\
-\
-
-\f1 pip3.4 --help
-\f0 \
-\
-for an overview. See the ReadMe file and the Python documentation for more information.\
+\b0 .\
\
\b IMPORTANT:
@@ -36,4 +24,4 @@
\b tkinter
\b0 graphical user interface toolkit require specific versions of the
\b Tcl/Tk
-\b0 platform independent windowing toolkit. Visit {\field{\*\fldinst{HYPERLINK "http://www.python.org/download/mac/tcltk/"}}{\fldrslt http://www.python.org/download/mac/tcltk/}} for current information on supported and recommended versions of Tcl/Tk for this version of Python and Mac OS X.}
\ No newline at end of file
+\b0 platform independent windowing toolkit. Visit {\field{\*\fldinst{HYPERLINK "https://www.python.org/download/mac/tcltk/"}}{\fldrslt https://www.python.org/download/mac/tcltk/}} for current information on supported and recommended versions of Tcl/Tk for this version of Python and Mac OS X.}
\ No newline at end of file
diff --git a/Mac/BuildScript/resources/readme.rtf b/Mac/BuildScript/resources/readme.rtf
new file mode 100644
--- /dev/null
+++ b/Mac/BuildScript/resources/readme.rtf
@@ -0,0 +1,51 @@
+{\rtf1\ansi\ansicpg1252\cocoartf1343\cocoasubrtf140
+{\fonttbl\f0\fswiss\fcharset0 Helvetica;\f1\fmodern\fcharset0 CourierNewPSMT;}
+{\colortbl;\red255\green255\blue255;}
+\margl1440\margr1440\vieww13020\viewh15160\viewkind0
+\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\pardirnatural
+
+\f0\fs24 \cf0 This package will install Python $FULL_VERSION for Mac OS X $MACOSX_DEPLOYMENT_TARGET for the following architecture(s): $ARCHITECTURES.\
+\
+
+\b \ul Update your version of Tcl/Tk to use IDLE or other Tk applications
+\b0 \ulnone \
+\
+To use IDLE or other programs that use the Tkinter graphical user interface toolkit, you need to install a newer third-party version of the
+\i Tcl/Tk
+\i0 frameworks. Visit {\field{\*\fldinst{HYPERLINK "https://www.python.org/download/mac/tcltk/"}}{\fldrslt https://www.python.org/download/mac/tcltk/}} for current information about supported and recommended versions of
+\i Tcl/Tk
+\i0 for this version of Python and of Mac OS X.\
+
+\b \ul \
+\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\pardirnatural
+\cf0 \ulc0 Python 3 and Python 2 Co-existence\
+
+\b0 \ulnone \
+Python.org Python $VERSION and 2.7.x versions can both be installed on your system and will not conflict. Command names for Python 3 contain a 3 in them,
+\f1 python3
+\f0 (or
+\f1 python$VERSION
+\f0 ),
+\f1 idle3
+\f0 (or i
+\f1 dle$VERSION
+\f0 ),
+\f1 pip3
+\f0 (or
+\f1 pip$VERSION
+\f0 ), etc. Python 2.7 command names contain a 2 or no digit:
+\f1 python2
+\f0 (or
+\f1 python2.7
+\f0 or
+\f1 python
+\f0 ),
+\f1 idle2
+\f0 (or
+\f1 idle2.7
+\f0 or
+\f1 idle
+\f0 ), etc. If you want to use
+\f1 pip
+\f0 with Python 2.7.x, download and install a separate copy of it from the Python Package Index ({\field{\*\fldinst{HYPERLINK "https://pypi.python.org/pypi/pip/"}}{\fldrslt https://pypi.python.org/pypi/pip/}}).\
+}
\ No newline at end of file
--
Repository URL: https://hg.python.org/cpython
More information about the Python-checkins
mailing list