[Python-Dev] versioned .so files for Python 3.2
Barry Warsaw
barry at python.org
Thu Jul 22 16:40:36 CEST 2010
On Jul 16, 2010, at 12:40 PM, Matthias Klose wrote:
>I like the proposal, but IMO it is too unspecific about the abi tag.
>Assume that an extension is built with such a configured python and
>then tried to run with an abi compatible configured python, but with a
>slightly different version tag, the extension won't be found.
>Differing file names per configuration should be avoided. Proposing
>
> 1) Remove the configure option and use the new naming using the tag
> for all configurations unconditionally. Everybody can expect the same
> name on every installation, and PEP 384 most likely will require
> using a tag too.
> As Amaury did point out, there is a use case in that PyPy can
> use this tag too to build extensions only usable by PyPy.
>
> 2) As PEP 3147 defines a non-configurable name for .pyc files, this
> PEP should define a non-configurable way for the tag. The tag should
> include all information which currently makes an extension ABI
> incompatible:
> - the python implementation (cpython, PyPy, ...)
> - the python version (3,2, 3.3, ...)
> - unicode configure option (--with-wide-unicode, 16 or 32)
> - platform information (necessary?)
> If this list changes for coming python versions, then it can be
> extended.
> Barry pointed out on irc chat that people might want to build
> experimental ABI incompatible versions, which should have its
> own tag. If this is wanted, please provide a configure option
> which lets extend/append to the tag.
Okay, I'm convinced we need to hard code this tag, and I think it's okay not
to provide a configure switch to control this. I've pushed a new version of
the diff and PEP, the latter attached here for your convenience.
Thanks for all the feedback.
-Barry
PEP: 3149
Title: ABI version tagged .so files
Version: $Revision: 81577 $
Last-Modified: $Date: 2010-05-27 19:54:25 -0400 (Thu, 27 May 2010) $
Author: Barry Warsaw <barry at python.org>
Status: Draft
Type: Standards Track
Content-Type: text/x-rst
Created: 2010-07-09
Python-Version: 3.2
Post-History: 2010-07-14, 2010-07-22
Resolution: TBD
Abstract
========
PEP 3147 [1]_ described an extension to Python's import machinery that
improved the sharing of Python source code, by allowing more than one
byte compilation file (.pyc) to be co-located with each source file.
This PEP defines an adjunct feature which allows the co-location of
extension module files (.so) in a similar manner. This optional,
build-time feature will enable downstream distributions of Python to
more easily provide more than one Python major version at a time.
Background
==========
PEP 3147 defined the file system layout for a pure-Python package,
where multiple versions of Python are available on the system. For
example, where the `alpha` package containing source modules `one.py`
and `two.py` exist on a system with Python 3.2 and 3.3, the post-byte
compilation file system layout would be::
alpha/
__pycache__/
__init__.cpython-32.pyc
__init__.cpython-33.pyc
one.cpython-32.pyc
one.cpython-33.pyc
two.cpython-32.pyc
two.cpython-33.pyc
__init__.py
one.py
two.py
For packages with extension modules, a similar differentiation is
needed for the module's .so files. Extension modules compiled for
different Python major versions are incompatible with each other due
to changes in the ABI. Different configuration/compilation options
for the same Python version can result in different ABIs
(e.g. --with-wide-unicode).
While PEP 384 [2]_ defines a stable ABI, it will minimize, but not
eliminate extension module incompatibilities between Python builds or
major versions. Thus a mechanism for discriminating extension module
file names is proposed.
Rationale
=========
Linux distributions such as Ubuntu [3]_ and Debian [4]_ provide more
than one Python version at the same time to their users. For example,
Ubuntu 9.10 Karmic Koala users can install Python 2.5, 2.6, and 3.1,
with Python 2.6 being the default.
In order to share as much as possible between the available Python
versions, these distributions install third party (i.e. non-standard
library) packages into `/usr/share/pyshared` and symlink to them from
`/usr/lib/pythonX.Y/dist-packages`. The symlinks exist because in a
pre-PEP 3147 world (i.e < Python 3.2), the `.pyc` files resulting from
byte compilation by the various installed Pythons will name collide
with each other. For Python versions >= 3.2, all pure-Python packages
can be shared, because the `.pyc` files will no longer cause file
system naming conflicts. Eliminating these symlinks makes for a
simpler, more robust Python distribution.
A similar situation arises with shared library extensions. Because
extension modules are typically named `foo.so` for a `foo` extension
module, these would also name collide if `foo` was provided for more
than one Python version.
In addition, because different configuration/compilation options for
the same Python version can cause different ABIs to be presented to
extension modules. On POSIX systems for example, the configure
options ``--with-pydebug``, ``--with-pymalloc``, and
``--with-wide-unicode`` all change the ABI. This PEP proposes to
encode build-time options in the file name of the ``.so`` extension
module files.
PyPy [5]_ can also benefit from this PEP, allowing it to avoid name
collisions in extension modules built for its API, but with a
different `.so` tag.
Proposal
========
The configure/compilation options chosen at Python interpreter
build-time will be encoded in the shared library file name for
extension modules. This "tag" will appear between the module base
name and the operation file system extension for shared libraries.
The following information *MUST* be included in the shared library
file name:
* The Python implementation (e.g. cpython, pypy, jython, etc.)
* The interpreter's major and minor version numbers
These two fields are separated by a hyphen and no dots are to appear
between the major and minor version numbers. E.g. ``cpython-32``.
Python implementations *MAY* include additional flags in the file name
tag as appropriate. For example, on POSIX systems these flags will
also contribute to the file name:
* ``--with-pydebug`` (flag: ``d``)
* ``--with-pymalloc`` (flag: ``m``)
* ``--with-wide-unicode`` (flag: ``u``)
By default in Python 3.2, ``configure`` enables ``--with-pymalloc`` so
shared library file names would appear as ``foo.cpython-32m.so``.
When the other two flags are also enabled, the file names would be
``foo.cpython-32dmu.so``.
(This PEP only addresses build issues on POSIX systems that use the
``configure`` script. While Windows or other platform support is not
explicitly disallowed under this PEP, platform expertise is needed in
order to evaluate, describe, and implement support on such platforms.)
The shared library file name tag is used unconditionally; it cannot be
changed. The tag and extension module suffix are available through
the ``sysconfig`` modules via the following variables::
>>> sysconfig.get_config_var('SO')
'.cpython-32mu.so'
>>> sysconfig.get_config_var('SOABI')
'cpython-32mu'
Note that ``$SOABI`` contains just the tag, while ``$SO`` includes the
platform extension for shared library files, and is the exact suffix
added to the extension module name.
For an arbitrary package `foo`, you would see these files when the
distribution package was installed::
/usr/share/pyshared/foo.cpython-32m.so
/usr/share/pyshared/foo.cpython-33m.so
Python's dynamic module loader will recognize and import shared
library extension modules with a tag that matches its build-time
options. For backward compatibility, Python will also continue to
import untagged extension modules, e.g. ``foo.so``.
This shared library tag would be used globally for all distutils-based
extension modules, regardless of where on the file system they are
built. Extension modules built by means other than distutils would
either have to calculate the tag manually, or fallback to the
non-tagged `.so` file name.
Proven approach
===============
The approach described here is already proven, in a sense, on Debian
and Ubuntu system where different extensions are used for debug builds
of Python and extension modules. Debug builds on Windows also already
use a different file extension for dynamic libraries, and in fact
encoded (in a different way than proposed in this PEP) the Python
major and minor version in the `.dll` file name.
PEP 384
=======
PEP 384 defines a stable ABI for extension modules. In theory,
universal adoption of PEP 384 would eliminate the need for this PEP
because all extension modules could be compatible with any Python
version. In practice of course, it will be impossible to achieve
universal adoption, and as described above, different built-time flags
still affect the ABI. Thus even with a stable ABI, this PEP may still
be necessary. While a complete specification is reserved for PEP 384,
here is a discussion of the relevant issues.
PEP 384 describes a change to ``PyModule_Create()`` where ``3`` is
passed as the API version if the extension was complied with
``Py_LIMITED_API``. This should be formalized into an official macro
called ``PYTHON_ABI_VERSION`` to mirror ``PYTHON_API_VERSION``. If
and when the ABI changes in an incompatible way, this version number
would be bumped. To facilitate sharing, Python would be extended to
search for extension modules with the ``PYTHON_ABI_VERSION`` number in
its name. The prefix ``abi`` is reserved for Python's use.
Thus, an initial implementation of PEP 384, when Python is configured
with the default set of flags, would search for the following file
names when extension module `foo` is imported (in this order)::
foo.cpython-XYm.so
foo.abi3.so
foo.so
The distutils [6]_ ``build_ext`` command would also have to be
extended to compile to shared library files with the ``abi3`` tag,
when the module author indicates that their extension supports that
version of the ABI. This could be done in a backward compatible way
by adding a keyword argument to the ``Extension`` class, such as::
Extension('foo', ['foo.c'], abi=3)
Alternatives
============
In the initial python-dev thread [7]_ where this idea was first
introduced, several alternatives were suggested. For completeness
they are listed here, along with the reasons for not adopting them.
Independent directories or symlinks
-----------------------------------
Debian and Ubuntu could simply add a version-specific directory to
``sys.path`` that would contain just the extension modules for that
version of Python. Or the symlink trick eliminated in PEP 3147 could
be retained for just shared libraries. This approach is rejected
because it propagates the essential complexity that PEP 3147 tries to
avoid, and adds potentially several additional directories to search
for all modules, even when the number of extension modules is much
fewer than the total number of Python packages. For example, builds
were made available both with and without wide unicode, with and
without pydebug, and with and without pymalloc, the total number of
directories search increases substantially.
Don't share packages with extension modules
-------------------------------------------
It has been suggested that Python packages with extension modules not
be shared among all supported Python versions on a distribution. Even
with adoption of PEP 3149, extension modules will have to be compiled
for every supported Python version, so perhaps sharing of such
packages isn't useful anyway. Not sharing packages with extensions
though is infeasible for several reasons.
If a pure-Python package is shared in one version, should it suddenly
be not-shared if the next release adds an extension module for speed?
Also, even though all extension shared libraries will be compiled and
distributed once for every supported Python, there's a big difference
between duplicating the `.so` files and duplicating all `.py` files.
The extra size increases the download time for such packages, and more
immediately, increases the space pressures on already constrained
distribution CD-ROMs.
Reference implementation
========================
Work on this code is tracked in a Bazaar branch on Launchpad [8]_
until it's ready for merge into Python 3.2. The work-in-progress diff
can also be viewed [9]_ and is updated automatically as new changes
are uploaded.
References
==========
.. [1] PEP 3147
.. [2] PEP 384
.. [3] Ubuntu: <http://www.ubuntu.com>
.. [4] Debian: <http://www.debian.org>
.. [5] http://codespeak.net/pypy/dist/pypy/doc/
.. [6] http://docs.python.org/py3k/distutils/index.html
.. [7] http://mail.python.org/pipermail/python-dev/2010-June/100998.html
.. [8] https://code.edge.launchpad.net/~barry/python/sovers
.. [9] https://code.edge.launchpad.net/~barry/python/sovers/+merge/29411
Copyright
=========
This document has been placed in the public domain.
..
Local Variables:
mode: indented-text
indent-tabs-mode: nil
sentence-end-double-space: t
fill-column: 70
coding: utf-8
End:
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: not available
URL: <http://mail.python.org/pipermail/python-dev/attachments/20100722/8a639650/attachment.pgp>
More information about the Python-Dev
mailing list