problem with module PyVisa
jeandubois314 at gmail.com
Tue Nov 20 14:28:57 CET 2012
On 11 nov, 20:30, Jean Dubois <jeandubois... at gmail.com> wrote:
> On 9 nov, 22:14, w... at mac.com wrote:
> > On Nov 9, 2012, at 3:43 PM, Jean Dubois <jeandubois... at gmail.com> wrote:
> > > The error may be obvious but finding this file and how to install it
> > > is not unfortunately.
> > > It seems I have to install it from the National Instruments site but
> > > Debian Linux doesn't seem to be supported...
> > > and I doubt whether just copying this file will be sufficient to make
> > > PyVisa work.
> > > I wonder whether there might be another way to communicate via USB
> > > with a Keithley programmable power supply using Python.
> > > best regards,
> > > Jean
> > > --
> > >http://mail.python.org/mailman/listinfo/python-list
> > I've been using pyserial quite successfully to control a USB-to-serial converter.
> > That is, controlling a couple of RS232 serial devices via the USB port through a KeySpan USB-to-Serial converter.
> > Pyserial seems to make communication through the USB port quite transparent, at least on my OS-X system.
> > -Bill
> Well, in fact I do have some working scripts using pyserial to control
> an older (and more expensive) Keithley sourcemeter in combination with
> a USB-to-serial converter.
> But the trouble started when buying a cheaper and newer Keithley model
> which does not have rs232 but only USB. I noticed they have put an
> extra layer above USB called USBTMC
> which complicates things further. I followed the instructions athttp://www.home.agilent.com/upload/cmc_upload/All/usbtmc.htm?&cc=BE&l...outline
> and compiled and loaded the usbtmc-driver but I still can't
> communicate with the Keithley, hence I started looking for an
> alternative using PyVisa...and now I'm stuck
I finally got it working without PyVisa as follows:
#sample program for Keithley 2200 USB
#first compile and load module usbtmc
usbkeith = open('/dev/usbtmc1','r+')
#next commando is very important
#without it you can fetch data but not SET data
usbkeith.write("SYST:REM" + "\n")
print 'Found: ',identification
print 'Measured voltage: ',measurement
More information about the Python-list