Mailman 3 May 2020 - Buildbot-status

Buildbot failure in Python on s390x Fedora Rawhide Clang Installed 3.x
by buildbot＠python.org May 27, 2020

May 27, 2020

The Buildbot has detected a failed build on builder s390x Fedora Rawhide Clang Installed 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#builders/506/builds/574 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-rawhide-z Build Reason: <unknown> Blamelist: Mark Dickinson <mdickinson(a)enthought.com>, Victor Stinner <vstinner(a)python.org>, Xavier Fernandez <xav.fernandez(a)gmail.com> BUILD FAILED: failed made install dir unwritable (failure) Summary of the results of the build (if available): =================================================== == Tests result: SUCCESS == 407 tests OK. 18 tests skipped: test_asdl_parser test_check_c_globals test_clinic test_devpoll test_gdb test_ioctl test_kqueue test_msilib test_nis test_ossaudiodev test_startfile test_tix test_tk test_ttk_guionly test_winconsoleio test_winreg test_winsound test_zipfile64 Total duration: 4 min 27 sec Captured traceback ================== remote: Enumerating objects: 6 remote: Enumerating objects: 32, done. remote: Counting objects: 3% (1/32) remote: Counting objects: 6% (2/32) remote: Counting objects: 9% (3/32) remote: Counting objects: 12% (4/32) remote: Counting objects: 15% (5/32) remote: Counting objects: 18% (6/32) remote: Counting objects: 21% (7/32) remote: Counting objects: 25% (8/32) remote: Counting objects: 28% (9/32) remote: Counting objects: 31% (10/32) remote: Counting objects: 34% (11/32) remote: Counting objects: 37% (12/32) remote: Counting objects: 40% (13/32) remote: Counting objects: 43% (14/32) remote: Counting objects: 46% (15/32) remote: Counting objects: 50% (16/32) remote: Counting objects: 53% (17/32) remote: Counting objects: 56% (18/32) remote: Counting objects: 59% (19/32) remote: Counting objects: 62% (20/32) remote: Counting objects: 65% (21/32) remote: Counting objects: 68% (22/32) remote: Counting objects: 71% (23/32) remote: Counting objects: 75% (24/32) remote: Counting objects: 78% (25/32) remote: Counting objects: 81% (26/32) remote: Counting objects: 84% (27/32) remote: Counting objects: 87% (28/32) remote: Counting objects: 90% (29/32) remote: Counting objects: 93% (30/32) remote: Counting objects: 96% (31/32) remote: Counting objects: 100% (32/32) remote: Counting objects: 100% (32/32), done. remote: Compressing objects: 4% (1/22) remote: Compressing objects: 9% (2/22) remote: Compressing objects: 13% (3/22) remote: Compressing objects: 18% (4/22) remote: Compressing objects: 22% (5/22) remote: Compressing objects: 27% (6/22) remote: Compressing objects: 31% (7/22) remote: Compressing objects: 36% (8/22) remote: Compressing objects: 40% (9/22) remote: Compressing objects: 45% (10/22) remote: Compressing objects: 50% (11/22) remote: Compressing objects: 54% (12/22) remote: Compressing objects: 59% (13/22) remote: Compressing objects: 63% (14/22) remote: Compressing objects: 68% (15/22) remote: Compressing objects: 72% (16/22) remote: Compressing objects: 77% (17/22) remote: Compressing objects: 81% (18/22) remote: Compressing objects: 86% (19/22) remote: Compressing objects: 90% (20/22) remote: Compressing objects: 95% (21/22) remote: Compressing objects: 100% (22/22) remote: Compressing objects: 100% (22/22), done. remote: Total 38 (delta 15), reused 14 (delta 10), pack-reused 6 From https://github.com/python/cpython * branch master -> FETCH_HEAD Auto packing the repository in background for optimum performance. See "git help gc" for manual housekeeping. Reset branch 'master' Python/pytime.c:154:10: warning: implicit conversion from 'long' to 'double' changes value from 9223372036854775807 to 9223372036854775808 [-Wimplicit-int-float-conversion] if (!_Py_InIntegralTypeRange(time_t, intpart)) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Include/pymath.h:228:82: note: expanded from macro '_Py_InIntegralTypeRange' #define _Py_InIntegralTypeRange(type, v) (_Py_IntegralTypeMin(type) <= v && v <= _Py_IntegralTypeMax(type)) ~~ ^~~~~~~~~~~~~~~~~~~~~~~~~ ./Include/pymath.h:221:124: note: expanded from macro '_Py_IntegralTypeMax' #define _Py_IntegralTypeMax(type) ((_Py_IntegralTypeSigned(type)) ? (((((type)1 << (sizeof(type)*CHAR_BIT - 2)) - 1) << 1) + 1) : ~(type)0) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~ Python/pytime.c:207:14: warning: implicit conversion from 'long' to 'double' changes value from 9223372036854775807 to 9223372036854775808 [-Wimplicit-int-float-conversion] if (!_Py_InIntegralTypeRange(time_t, intpart)) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Include/pymath.h:228:82: note: expanded from macro '_Py_InIntegralTypeRange' #define _Py_InIntegralTypeRange(type, v) (_Py_IntegralTypeMin(type) <= v && v <= _Py_IntegralTypeMax(type)) ~~ ^~~~~~~~~~~~~~~~~~~~~~~~~ ./Include/pymath.h:221:124: note: expanded from macro '_Py_IntegralTypeMax' #define _Py_IntegralTypeMax(type) ((_Py_IntegralTypeSigned(type)) ? (((((type)1 << (sizeof(type)*CHAR_BIT - 2)) - 1) << 1) + 1) : ~(type)0) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~ Python/pytime.c:392:10: warning: implicit conversion from 'long' to 'double' changes value from 9223372036854775807 to 9223372036854775808 [-Wimplicit-int-float-conversion] if (!_Py_InIntegralTypeRange(_PyTime_t, d)) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Include/pymath.h:228:82: note: expanded from macro '_Py_InIntegralTypeRange' #define _Py_InIntegralTypeRange(type, v) (_Py_IntegralTypeMin(type) <= v && v <= _Py_IntegralTypeMax(type)) ~~ ^~~~~~~~~~~~~~~~~~~~~~~~~ ./Include/pymath.h:221:124: note: expanded from macro '_Py_IntegralTypeMax' #define _Py_IntegralTypeMax(type) ((_Py_IntegralTypeSigned(type)) ? (((((type)1 << (sizeof(type)*CHAR_BIT - 2)) - 1) << 1) + 1) : ~(type)0) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~ 3 warnings generated. ./Modules/timemodule.c:116:13: warning: code will never be executed [-Wunreachable-code] PyErr_SetString(PyExc_OverflowError, ^~~~~~~~~~~~~~~ 1 warning generated. ./Modules/_threadmodule.c:1587:19: warning: implicit conversion from '_PyTime_t' (aka 'long') to 'double' changes value from 9223372036854775 to 9223372036854776 [-Wimplicit-int-float-conversion] timeout_max = (_PyTime_t)PY_TIMEOUT_MAX * 1e-6; ^~~~~~~~~~~~~~~~~~~~~~~~~ ~ 1 warning generated. /home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang-installed/build/Modules/_decimal/libmpdec/mpdecimal.c:7940:25: warning: implicit conversion from 'unsigned long' to 'double' changes value from 18446744073709551614 to 18446744073709551616 [-Wimplicit-int-float-conversion] return (x > SIZE_MAX-1) ? SIZE_MAX : (size_t)x + 1; ~ ~~~~~~~~^~ /home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang-installed/build/Modules/_decimal/libmpdec/mpdecimal.c:7959:18: warning: implicit conversion from 'long' to 'double' changes value from 105263157894736842 to 105263157894736848 [-Wimplicit-int-float-conversion] return (x >= MPD_MAXIMPORT) ? MPD_SSIZE_MAX : (mpd_ssize_t)x + 1; ~~ ^~~~~~~~~~~~~ /home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang-installed/build/Modules/_decimal/libmpdec/mpdecimal.h:175:23: note: expanded from macro 'MPD_MAXIMPORT' #define MPD_MAXIMPORT 105263157894736842L /* ceil((2*MPD_MAX_PREC)/MPD_RDIGITS) */ ^~~~~~~~~~~~~~~~~~~ 2 warnings generated. WARNING: The script easy_install-3.10 is installed in '/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang-installed/build/target/bin' which is not on PATH. Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location. WARNING: The scripts pip3 and pip3.10 are installed in '/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang-installed/build/target/bin' which is not on PATH. Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location. chmod: target/lib/python3.10/site-packages/setuptools-46.1.3.dist-info/RECORD: new permissions are r-xrw-rwx, not r-xr--r-x chmod: target/lib/python3.10/site-packages/setuptools-46.1.3.dist-info/INSTALLER: new permissions are r-xrw-rwx, not r-xr--r-x chmod: target/lib/python3.10/site-packages/pip-20.1.dist-info/RECORD: new permissions are r-xrw-rwx, not r-xr--r-x chmod: target/lib/python3.10/site-packages/pip-20.1.dist-info/INSTALLER: new permissions are r-xrw-rwx, not r-xr--r-x test_msilib skipped -- No module named 'msilib' test_startfile skipped -- object <module 'os' from '/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.10/os.py'> has no attribute 'startfile' test_ttk_guionly skipped -- Tk unavailable due to TclError: no display name and no $DISPLAY environment variab [...] test_tk skipped -- Tk unavailable due to TclError: no display name and no $DISPLAY environment variab [...] test_ossaudiodev skipped -- [Errno 2] No such file or directory: '/dev/dsp' test_nis skipped -- No module named 'nis' test_clinic skipped -- clinic directory could not be found test_check_c_globals skipped -- c-analyzer directory could not be found test_devpoll skipped -- test works only on Solaris OS family test_tix skipped -- Tk unavailable due to TclError: no display name and no $DISPLAY environment variab [...] test_zipfile64 skipped -- test requires loads of disk-space bytes and a long time to run test_flock (__main__.FNTLEINTRTest) ... ok test_lockf (__main__.FNTLEINTRTest) ... ok test_read (__main__.OSEINTRTest) ... ok test_wait (__main__.OSEINTRTest) ... ok test_wait3 (__main__.OSEINTRTest) ... ok test_wait4 (__main__.OSEINTRTest) ... ok test_waitpid (__main__.OSEINTRTest) ... ok test_write (__main__.OSEINTRTest) ... ok test_devpoll (__main__.SelectEINTRTest) ... skipped 'need select.devpoll' test_epoll (__main__.SelectEINTRTest) ... ok test_kqueue (__main__.SelectEINTRTest) ... skipped 'need select.kqueue' test_poll (__main__.SelectEINTRTest) ... ok test_select (__main__.SelectEINTRTest) ... ok test_sigtimedwait (__main__.SignalEINTRTest) ... ok test_sigwaitinfo (__main__.SignalEINTRTest) ... ok test_accept (__main__.SocketEINTRTest) ... ok test_open (__main__.SocketEINTRTest) ... ok test_os_open (__main__.SocketEINTRTest) ... ok test_recv (__main__.SocketEINTRTest) ... ok test_recvmsg (__main__.SocketEINTRTest) ... ok test_send (__main__.SocketEINTRTest) ... ok test_sendall (__main__.SocketEINTRTest) ... ok test_sendmsg (__main__.SocketEINTRTest) ... ok test_sleep (__main__.TimeEINTRTest) ... ok ---------------------------------------------------------------------- Ran 24 tests in 6.606s OK (skipped=2) test_gdb skipped -- test_gdb only works on source builds at the moment. test_asdl_parser skipped -- test irrelevant for an installed Python test_winsound skipped -- No module named 'winsound' test_winreg skipped -- No module named 'winreg' test_ioctl skipped -- Unable to open /dev/tty test_winconsoleio skipped -- test only relevant on win32 test_kqueue skipped -- test works only on BSD Test report =========== Sincerely, -The Buildbot

1 0

Buildbot failure in Python on AMD64 FreeBSD Shared 3.8
by buildbot＠python.org May 27, 2020

May 27, 2020

The Buildbot has detected a new failure on builder AMD64 FreeBSD Shared 3.8 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#builders/18/builds/257 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: koobs-freebsd-564d Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com>, Tal Einat <taleinat+github(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Tests result: FAILURE then FAILURE == 403 tests OK. 10 slowest tests: - test_multiprocessing_spawn: 21 min 19 sec - test_tools: 20 min 54 sec - test_lib2to3: 18 min 31 sec - test_multiprocessing_forkserver: 9 min 32 sec - test_regrtest: 9 min 16 sec - test_asyncio: 8 min 50 sec - test_pickle: 8 min 18 sec - test_capi: 8 min - test_subprocess: 6 min 54 sec - test_buffer: 5 min 59 sec 1 test failed: test__xxsubinterpreters 19 tests skipped: test_dbm_gnu test_devpoll test_epoll test_idle test_ioctl test_msilib test_ossaudiodev test_spwd test_startfile test_tcl test_tix test_tk test_ttk_guionly test_ttk_textonly test_turtle test_winconsoleio test_winreg test_winsound test_zipfile64 3 re-run tests: test__xxsubinterpreters test_multiprocessing_main_handling test_tokenize Total duration: 1 hour 43 min Captured traceback ================== Traceback (most recent call last): File "/usr/home/buildbot/python/3.8.koobs-freebsd-564d/build/Lib/threading.py", line 932, in _bootstrap_inner self.run() File "/usr/home/buildbot/python/3.8.koobs-freebsd-564d/build/Lib/threading.py", line 870, in run self._target(*self._args, **self._kwargs) File "/usr/home/buildbot/python/3.8.koobs-freebsd-564d/build/Lib/test/test__xxsubinterpreters.py", line 51, in run interpreters.run_string(interp, dedent(f""" RuntimeError: interpreter already running Traceback (most recent call last): File "/usr/home/buildbot/python/3.8.koobs-freebsd-564d/build/Lib/threading.py", line 932, in _bootstrap_inner self.run() File "/usr/home/buildbot/python/3.8.koobs-freebsd-564d/build/Lib/threading.py", line 870, in run self._target(*self._args, **self._kwargs) File "/usr/home/buildbot/python/3.8.koobs-freebsd-564d/build/Lib/test/test__xxsubinterpreters.py", line 51, in run interpreters.run_string(interp, dedent(f""" RuntimeError: unrecognized interpreter ID 39 Traceback (most recent call last): File "/usr/home/buildbot/python/3.8.koobs-freebsd-564d/build/Lib/test/test__xxsubinterpreters.py", line 492, in test_subinterpreter self.assertTrue(interpreters.is_running(interp)) AssertionError: False is not true Traceback (most recent call last): File "/usr/home/buildbot/python/3.8.koobs-freebsd-564d/build/Lib/threading.py", line 932, in _bootstrap_inner self.run() File "/usr/home/buildbot/python/3.8.koobs-freebsd-564d/build/Lib/threading.py", line 870, in run self._target(*self._args, **self._kwargs) File "/usr/home/buildbot/python/3.8.koobs-freebsd-564d/build/Lib/test/test__xxsubinterpreters.py", line 51, in run interpreters.run_string(interp, dedent(f""" RuntimeError: interpreter already running FAIL Traceback (most recent call last): File "/usr/home/buildbot/python/3.8.koobs-freebsd-564d/build/Lib/test/test__xxsubinterpreters.py", line 857, in test_already_running interpreters.run_string(self.id, 'print("spam")') AssertionError: RuntimeError not raised Traceback (most recent call last): File "/usr/home/buildbot/python/3.8.koobs-freebsd-564d/build/Lib/test/test__xxsubinterpreters.py", line 762, in test_still_running self.assertTrue(interpreters.is_running(interp), AssertionError: False is not true : Interp 39 should be running before destruction. Traceback (most recent call last): File "/usr/home/buildbot/python/3.8.koobs-freebsd-564d/build/Lib/threading.py", line 932, in _bootstrap_inner self.run() File "/usr/home/buildbot/python/3.8.koobs-freebsd-564d/build/Lib/threading.py", line 870, in run self._target(*self._args, **self._kwargs) File "/usr/home/buildbot/python/3.8.koobs-freebsd-564d/build/Lib/test/test__xxsubinterpreters.py", line 51, in run interpreters.run_string(interp, dedent(f""" RuntimeError: unrecognized interpreter ID 46 Test report =========== Failed tests: - test__xxsubinterpreters - test_multiprocessing_main_handling - test_tokenize Failed subtests: - test_still_running - test.test__xxsubinterpreters.DestroyTests - test_subinterpreter - test.test__xxsubinterpreters.IsRunningTests - test_already_running - test.test__xxsubinterpreters.RunStringTests Sincerely, -The Buildbot

1 0

Buildbot failure in Python on x86 Gentoo Installed with X 3.x
by buildbot＠python.org May 27, 2020

May 27, 2020

The Buildbot has detected a failed build on builder x86 Gentoo Installed with X 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#builders/128/builds/953 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: ware-gentoo-x86 Build Reason: <unknown> Blamelist: Xavier Fernandez <xav.fernandez(a)gmail.com> BUILD FAILED: failed made install dir unwritable (failure) Summary of the results of the build (if available): =================================================== == Tests result: SUCCESS == 412 tests OK. 13 tests skipped: test_asdl_parser test_check_c_globals test_clinic test_devpoll test_gdb test_ioctl test_kqueue test_msilib test_startfile test_winconsoleio test_winreg test_winsound test_zipfile64 Total duration: 36 min 55 sec Captured traceback ================== remote: Enumerating objects: 9, done. remote: Counting objects: 11% (1/9) remote: Counting objects: 22% (2/9) remote: Counting objects: 33% (3/9) remote: Counting objects: 44% (4/9) remote: Counting objects: 55% (5/9) remote: Counting objects: 66% (6/9) remote: Counting objects: 77% (7/9) remote: Counting objects: 88% (8/9) remote: Counting objects: 100% (9/9) remote: Counting objects: 100% (9/9), done. remote: Compressing objects: 20% (1/5) remote: Compressing objects: 40% (2/5) remote: Compressing objects: 60% (3/5) remote: Compressing objects: 80% (4/5) remote: Compressing objects: 100% (5/5) remote: Compressing objects: 100% (5/5), done. remote: Total 13 (delta 4), reused 5 (delta 4), pack-reused 4 From https://github.com/python/cpython * branch master -> FETCH_HEAD Reset branch 'master' Python/initconfig.c: In function ‘init_dump_ascii_wstr’: Python/initconfig.c:2646:34: warning: format ‘%lc’ expects argument of type ‘wint_t’, but argument 2 has type ‘wchar_t’ {aka ‘long int’} [-Wformat=] 2646 | PySys_WriteStderr("%lc", ch); | ~~^ ~~ | | | | | wchar_t {aka long int} | unsigned int | %ld Python/initconfig.c:2649:38: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘wchar_t’ {aka ‘long int’} [-Wformat=] 2649 | PySys_WriteStderr("\\x%02x", ch); | ~~~^ ~~ | | | | | wchar_t {aka long int} | unsigned int | %02lx Python/initconfig.c:2653:38: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘wchar_t’ {aka ‘long int’} [-Wformat=] 2653 | PySys_WriteStderr("\\U%08x", ch); | ~~~^ ~~ | | | | | wchar_t {aka long int} | unsigned int | %08lx Python/initconfig.c:2657:38: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘wchar_t’ {aka ‘long int’} [-Wformat=] 2657 | PySys_WriteStderr("\\u%04x", ch); | ~~~^ ~~ | | | | | wchar_t {aka long int} | unsigned int | %04lx /buildbot/buildarea/cpython/3.x.ware-gentoo-x86.installed/build/Modules/_zoneinfo.c: In function ‘load_data’: /buildbot/buildarea/cpython/3.x.ware-gentoo-x86.installed/build/Modules/_zoneinfo.c:911:30: warning: comparison of integer expressions of different signedness: ‘Py_ssize_t’ {aka ‘int’} and ‘unsigned int’ [-Wsign-compare] 911 | for (Py_ssize_t i = 0; i < self->num_transitions; ++i) { | ^ /buildbot/buildarea/cpython/3.x.ware-gentoo-x86.installed/build/Modules/_zoneinfo.c:949:30: warning: comparison of integer expressions of different signedness: ‘Py_ssize_t’ {aka ‘int’} and ‘unsigned int’ [-Wsign-compare] 949 | for (Py_ssize_t i = 0; i < self->num_ttinfos; ++i) { | ^ WARNING: The script easy_install-3.10 is installed in '/buildbot/buildarea/cpython/3.x.ware-gentoo-x86.installed/build/target/bin' which is not on PATH. Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location. WARNING: The scripts pip3 and pip3.10 are installed in '/buildbot/buildarea/cpython/3.x.ware-gentoo-x86.installed/build/target/bin' which is not on PATH. Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location. chmod: target/lib/python3.10/site-packages/pip-20.1.dist-info/RECORD: new permissions are r-xrw-rwx, not r-xr--r-x chmod: target/lib/python3.10/site-packages/pip-20.1.dist-info/INSTALLER: new permissions are r-xrw-rwx, not r-xr--r-x chmod: target/lib/python3.10/site-packages/setuptools-46.1.3.dist-info/RECORD: new permissions are r-xrw-rwx, not r-xr--r-x chmod: target/lib/python3.10/site-packages/setuptools-46.1.3.dist-info/INSTALLER: new permissions are r-xrw-rwx, not r-xr--r-x Test report =========== Sincerely, -The Buildbot

1 0

Buildbot failure in Python on PPC64LE RHEL7 Refleaks 3.8
by buildbot＠python.org May 27, 2020

May 27, 2020

The Buildbot has detected a failed build on builder PPC64LE RHEL7 Refleaks 3.8 while building Python. Full details are available at: https://buildbot.python.org/all/#builders/428/builds/104 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL7-ppc64le Build Reason: <unknown> Blamelist: BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Tests result: FAILURE then FAILURE == 409 tests OK. 10 slowest tests: - test_concurrent_futures: 16 min - test_asyncio: 15 min 49 sec - test_multiprocessing_spawn: 14 min 12 sec - test_multiprocessing_forkserver: 9 min 14 sec - test_multiprocessing_fork: 7 min 28 sec - test_pickle: 4 min 54 sec - test_io: 4 min 14 sec - test_subprocess: 3 min 33 sec - test_lib2to3: 3 min 24 sec - test_decimal: 2 min 59 sec 1 test failed: test_functools 13 tests skipped: test_devpoll test_ioctl test_kqueue test_msilib test_ossaudiodev test_startfile test_tix test_tk test_ttk_guionly test_winconsoleio test_winreg test_winsound test_zipfile64 1 re-run test: test_functools Total duration: 28 min 1 sec Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory . Test report =========== Failed tests: - test_functools Test leaking resources: - test_functools: memory blocks Sincerely, -The Buildbot

1 0

Buildbot failure in Python on s390x Fedora Clang Installed 3.x
by buildbot＠python.org May 27, 2020

May 27, 2020

The Buildbot has detected a failed build on builder s390x Fedora Clang Installed 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#builders/505/builds/570 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-z Build Reason: <unknown> Blamelist: Xavier Fernandez <xav.fernandez(a)gmail.com> BUILD FAILED: failed made install dir unwritable (failure) Summary of the results of the build (if available): =================================================== == Tests result: SUCCESS == 406 tests OK. 19 tests skipped: test_asdl_parser test_check_c_globals test_clinic test_devpoll test_gdb test_ioctl test_kqueue test_msilib test_nis test_ossaudiodev test_readline test_startfile test_tix test_tk test_ttk_guionly test_winconsoleio test_winreg test_winsound test_zipfile64 Total duration: 4 min 20 sec Captured traceback ================== remote: Enumerating objects: 16, done. remote: Counting objects: 6% (1/16) remote: Counting objects: 12% (2/16) remote: Counting objects: 18% (3/16) remote: Counting objects: 25% (4/16) remote: Counting objects: 31% (5/16) remote: Counting objects: 37% (6/16) remote: Counting objects: 43% (7/16) remote: Counting objects: 50% (8/16) remote: Counting objects: 56% (9/16) remote: Counting objects: 62% (10/16) remote: Counting objects: 68% (11/16) remote: Counting objects: 75% (12/16) remote: Counting objects: 81% (13/16) remote: Counting objects: 87% (14/16) remote: Counting objects: 93% (15/16) remote: Counting objects: 100% (16/16) remote: Counting objects: 100% (16/16), done. remote: Compressing objects: 10% (1/10) remote: Compressing objects: 20% (2/10) remote: Compressing objects: 30% (3/10) remote: Compressing objects: 40% (4/10) remote: Compressing objects: 50% (5/10) remote: Compressing objects: 60% (6/10) remote: Compressing objects: 70% (7/10) remote: Compressing objects: 80% (8/10) remote: Compressing objects: 90% (9/10) remote: Compressing objects: 100% (10/10) remote: Compressing objects: 100% (10/10), done. remote: Total 20 (delta 7), reused 6 (delta 6), pack-reused 4 From https://github.com/python/cpython * branch master -> FETCH_HEAD Reset branch 'master' Python/pytime.c:154:10: warning: implicit conversion from 'long' to 'double' changes value from 9223372036854775807 to 9223372036854775808 [-Wimplicit-int-float-conversion] if (!_Py_InIntegralTypeRange(time_t, intpart)) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Include/pymath.h:228:82: note: expanded from macro '_Py_InIntegralTypeRange' #define _Py_InIntegralTypeRange(type, v) (_Py_IntegralTypeMin(type) <= v && v <= _Py_IntegralTypeMax(type)) ~~ ^~~~~~~~~~~~~~~~~~~~~~~~~ ./Include/pymath.h:221:124: note: expanded from macro '_Py_IntegralTypeMax' #define _Py_IntegralTypeMax(type) ((_Py_IntegralTypeSigned(type)) ? (((((type)1 << (sizeof(type)*CHAR_BIT - 2)) - 1) << 1) + 1) : ~(type)0) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~ Python/pytime.c:207:14: warning: implicit conversion from 'long' to 'double' changes value from 9223372036854775807 to 9223372036854775808 [-Wimplicit-int-float-conversion] if (!_Py_InIntegralTypeRange(time_t, intpart)) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Include/pymath.h:228:82: note: expanded from macro '_Py_InIntegralTypeRange' #define _Py_InIntegralTypeRange(type, v) (_Py_IntegralTypeMin(type) <= v && v <= _Py_IntegralTypeMax(type)) ~~ ^~~~~~~~~~~~~~~~~~~~~~~~~ ./Include/pymath.h:221:124: note: expanded from macro '_Py_IntegralTypeMax' #define _Py_IntegralTypeMax(type) ((_Py_IntegralTypeSigned(type)) ? (((((type)1 << (sizeof(type)*CHAR_BIT - 2)) - 1) << 1) + 1) : ~(type)0) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~ Python/pytime.c:392:10: warning: implicit conversion from 'long' to 'double' changes value from 9223372036854775807 to 9223372036854775808 [-Wimplicit-int-float-conversion] if (!_Py_InIntegralTypeRange(_PyTime_t, d)) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Include/pymath.h:228:82: note: expanded from macro '_Py_InIntegralTypeRange' #define _Py_InIntegralTypeRange(type, v) (_Py_IntegralTypeMin(type) <= v && v <= _Py_IntegralTypeMax(type)) ~~ ^~~~~~~~~~~~~~~~~~~~~~~~~ ./Include/pymath.h:221:124: note: expanded from macro '_Py_IntegralTypeMax' #define _Py_IntegralTypeMax(type) ((_Py_IntegralTypeSigned(type)) ? (((((type)1 << (sizeof(type)*CHAR_BIT - 2)) - 1) << 1) + 1) : ~(type)0) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~ 3 warnings generated. ./Modules/timemodule.c:116:13: warning: code will never be executed [-Wunreachable-code] PyErr_SetString(PyExc_OverflowError, ^~~~~~~~~~~~~~~ ./Modules/_threadmodule.c:1587:19: warning: implicit conversion from '_PyTime_t' (aka 'long') to 'double' changes value from 9223372036854775 to 9223372036854776 [-Wimplicit-int-float-conversion] timeout_max = (_PyTime_t)PY_TIMEOUT_MAX * 1e-6; ^~~~~~~~~~~~~~~~~~~~~~~~~ ~ 1 warning generated. 1 warning generated. /home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang-installed/build/Modules/_decimal/libmpdec/mpdecimal.c:7940:25: warning: implicit conversion from 'unsigned long' to 'double' changes value from 18446744073709551614 to 18446744073709551616 [-Wimplicit-int-float-conversion] return (x > SIZE_MAX-1) ? SIZE_MAX : (size_t)x + 1; ~ ~~~~~~~~^~ /home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang-installed/build/Modules/_decimal/libmpdec/mpdecimal.c:7959:18: warning: implicit conversion from 'long' to 'double' changes value from 105263157894736842 to 105263157894736848 [-Wimplicit-int-float-conversion] return (x >= MPD_MAXIMPORT) ? MPD_SSIZE_MAX : (mpd_ssize_t)x + 1; ~~ ^~~~~~~~~~~~~ /home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang-installed/build/Modules/_decimal/libmpdec/mpdecimal.h:175:23: note: expanded from macro 'MPD_MAXIMPORT' #define MPD_MAXIMPORT 105263157894736842L /* ceil((2*MPD_MAX_PREC)/MPD_RDIGITS) */ ^~~~~~~~~~~~~~~~~~~ 2 warnings generated. WARNING: The script easy_install-3.10 is installed in '/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang-installed/build/target/bin' which is not on PATH. Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location. WARNING: The scripts pip3 and pip3.10 are installed in '/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang-installed/build/target/bin' which is not on PATH. Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location. chmod: target/lib/python3.10/site-packages/setuptools-46.1.3.dist-info/RECORD: new permissions are r-xrw-rwx, not r-xr--r-x chmod: target/lib/python3.10/site-packages/setuptools-46.1.3.dist-info/INSTALLER: new permissions are r-xrw-rwx, not r-xr--r-x chmod: target/lib/python3.10/site-packages/pip-20.1.dist-info/RECORD: new permissions are r-xrw-rwx, not r-xr--r-x chmod: target/lib/python3.10/site-packages/pip-20.1.dist-info/INSTALLER: new permissions are r-xrw-rwx, not r-xr--r-x test_check_c_globals skipped -- c-analyzer directory could not be found test_gdb skipped -- Couldn't find gdb on the path test_devpoll skipped -- test works only on Solaris OS family test_zipfile64 skipped -- test requires loads of disk-space bytes and a long time to run test_startfile skipped -- object <module 'os' from '/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang-installed/build/target/lib/python3.10/os.py'> has no attribute 'startfile' test_kqueue skipped -- test works only on BSD test_asdl_parser skipped -- test irrelevant for an installed Python test_msilib skipped -- No module named 'msilib' test_nis skipped -- No module named 'nis' test_tix skipped -- Tk unavailable due to TclError: no display name and no $DISPLAY environment variab [...] test_winreg skipped -- No module named 'winreg' test_clinic skipped -- clinic directory could not be found test_winsound skipped -- No module named 'winsound' test_ttk_guionly skipped -- Tk unavailable due to TclError: no display name and no $DISPLAY environment variab [...] test_readline skipped -- No module named 'readline' test_tk skipped -- Tk unavailable due to TclError: no display name and no $DISPLAY environment variab [...] test_winconsoleio skipped -- test only relevant on win32 test_flock (__main__.FNTLEINTRTest) ... ok test_lockf (__main__.FNTLEINTRTest) ... ok test_read (__main__.OSEINTRTest) ... ok test_wait (__main__.OSEINTRTest) ... ok test_wait3 (__main__.OSEINTRTest) ... ok test_wait4 (__main__.OSEINTRTest) ... ok test_waitpid (__main__.OSEINTRTest) ... ok test_write (__main__.OSEINTRTest) ... ok test_devpoll (__main__.SelectEINTRTest) ... skipped 'need select.devpoll' test_epoll (__main__.SelectEINTRTest) ... ok test_kqueue (__main__.SelectEINTRTest) ... skipped 'need select.kqueue' test_poll (__main__.SelectEINTRTest) ... ok test_select (__main__.SelectEINTRTest) ... ok test_sigtimedwait (__main__.SignalEINTRTest) ... ok test_sigwaitinfo (__main__.SignalEINTRTest) ... ok test_accept (__main__.SocketEINTRTest) ... ok test_open (__main__.SocketEINTRTest) ... ok test_os_open (__main__.SocketEINTRTest) ... ok test_recv (__main__.SocketEINTRTest) ... ok test_recvmsg (__main__.SocketEINTRTest) ... ok test_send (__main__.SocketEINTRTest) ... ok test_sendall (__main__.SocketEINTRTest) ... ok test_sendmsg (__main__.SocketEINTRTest) ... ok test_sleep (__main__.TimeEINTRTest) ... ok ---------------------------------------------------------------------- Ran 24 tests in 6.277s OK (skipped=2) test_ioctl skipped -- Unable to open /dev/tty test_ossaudiodev skipped -- [Errno 2] No such file or directory: '/dev/dsp' Test report =========== Sincerely, -The Buildbot

1 0

Buildbot failure in Python on AMD64 FreeBSD Non-Debug 3.x
by buildbot＠python.org May 27, 2020

May 27, 2020

The Buildbot has detected a new failure on builder AMD64 FreeBSD Non-Debug 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#builders/214/builds/808 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: koobs-freebsd-9e36 Build Reason: <unknown> Blamelist: Oleg Höfling <hoefling(a)users.noreply.github.com>, Pablo Galindo <Pablogsal(a)gmail.com>, Xavier Fernandez <xav.fernandez(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Tests result: FAILURE then FAILURE == 405 tests OK. 10 slowest tests: - test_peg_generator: 12 min 16 sec - test_multiprocessing_spawn: 6 min 34 sec - test_concurrent_futures: 5 min 28 sec - test_tokenize: 4 min 20 sec - test_multiprocessing_forkserver: 3 min 29 sec - test_lib2to3: 3 min 16 sec - test_unparse: 3 min 9 sec - test_unicodedata: 3 min - test_largefile: 2 min 51 sec - test_multiprocessing_fork: 2 min 35 sec 1 test failed: test_venv 19 tests skipped: test_dbm_gnu test_devpoll test_epoll test_idle test_ioctl test_msilib test_ossaudiodev test_spwd test_startfile test_tcl test_tix test_tk test_ttk_guionly test_ttk_textonly test_turtle test_winconsoleio test_winreg test_winsound test_zipfile64 3 re-run tests: test_interpreters test_pickle test_venv Total duration: 25 min 47 sec Captured traceback ================== Traceback (most recent call last): File "/usr/home/buildbot/python/3.x.koobs-freebsd-9e36.nondebug/build/Lib/test/test_interpreters.py", line 383, in test_already_running self.interp.run('print("spam")') AssertionError: RuntimeError not raised Traceback (most recent call last): File "/usr/home/buildbot/python/3.x.koobs-freebsd-9e36.nondebug/build/Lib/test/test_venv.py", line 535, in test_with_pip self.do_test_with_pip(False) File "/usr/home/buildbot/python/3.x.koobs-freebsd-9e36.nondebug/build/Lib/test/test_venv.py", line 518, in do_test_with_pip self.assertEqual(err.rstrip(), "") AssertionError: "WARNING: The directory '/.cache/pip' or [206 chars]lag." != '' - WARNING: The directory '/.cache/pip' or its parent directory is not owned or is not writable by the current user. The cache has been disabled. Check the permissions and owner of that directory. If executing pip with sudo, you may want sudo's -H flag. + Test report =========== Failed tests: - test_interpreters - test_pickle - test_venv Failed subtests: - test_already_running - test.test_interpreters.TestInterpreterRun - test_with_pip - test.test_venv.EnsurePipTest Sincerely, -The Buildbot

1 0

Buildbot failure in Python on AMD64 FreeBSD Shared 3.x
by buildbot＠python.org May 27, 2020

May 27, 2020

The Buildbot has detected a new failure on builder AMD64 FreeBSD Shared 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#builders/152/builds/909 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: koobs-freebsd-564d Build Reason: <unknown> Blamelist: Ammar Askar <ammar(a)ammaraskar.com>, Arturo Escaip <arturo.escaip(a)gmail.com>, Christian Heimes <christian(a)python.org>, Erlend Egeberg Aasland <erlend.aasland(a)innova.no>, Ethan Steinberg <ethan.steinberg(a)gmail.com>, Guido van Rossum <guido(a)python.org>, Hai Shi <shihai1992(a)gmail.com>, Lysandros Nikolaou <lisandrosnik(a)gmail.com>, Pablo Galindo <Pablogsal(a)gmail.com>, Raymond Hettinger <rhettinger(a)users.noreply.github.com>, Rotuna <sadhanasrinivasan(a)protonmail.com>, Serhiy Storchaka <storchaka(a)gmail.com>, Zackery Spytz <zspytz(a)gmail.com>, idomic <michael.ido(a)gmail.com>, sth <sth.dev(a)tejp.de>, ziheng <zihenglv(a)gmail.com> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/usr/home/buildbot/python/3.x.koobs-freebsd-564d/build/Lib/multiprocessing/process.py", line 315, in _bootstrap self.run() File "/usr/home/buildbot/python/3.x.koobs-freebsd-564d/build/Lib/multiprocessing/process.py", line 108, in run self._target(*self._args, **self._kwargs) File "/usr/home/buildbot/python/3.x.koobs-freebsd-564d/build/Lib/test/_test_multiprocessing.py", line 479, in _test_recursion wconn.send(id) File "/usr/home/buildbot/python/3.x.koobs-freebsd-564d/build/Lib/multiprocessing/connection.py", line 211, in send self._send_bytes(_ForkingPickler.dumps(obj)) File "/usr/home/buildbot/python/3.x.koobs-freebsd-564d/build/Lib/multiprocessing/connection.py", line 416, in _send_bytes self._send(header + buf) File "/usr/home/buildbot/python/3.x.koobs-freebsd-564d/build/Lib/multiprocessing/connection.py", line 373, in _send n = write(self._handle, buf) BrokenPipeError: [Errno 32] Broken pipe Traceback (most recent call last): File "/usr/home/buildbot/python/3.x.koobs-freebsd-564d/build/Lib/test/test__xxsubinterpreters.py", line 748, in test_still_running self.assertTrue(interpreters.is_running(interp), AssertionError: False is not true : Interp 48 should be running before destruction. Traceback (most recent call last): File "/usr/home/buildbot/python/3.x.koobs-freebsd-564d/build/Lib/test/test_concurrent_futures.py", line 1001, in test_idle_process_reuse_multiple self.assertLessEqual(len(executor._processes), 2) AssertionError: 3 not less than or equal to 2 Traceback (most recent call last): File "/usr/home/buildbot/python/3.x.koobs-freebsd-564d/build/Lib/test/test_interpreters.py", line 207, in test_subinterpreter self.assertTrue(interp.is_running()) AssertionError: False is not true Traceback (most recent call last): File "/usr/home/buildbot/python/3.x.koobs-freebsd-564d/build/Lib/test/test_interpreters.py", line 309, in test_still_running interp.close() AssertionError: RuntimeError not raised Test report =========== Failed tests: - test_unparse - test_multiprocessing_fork - test__xxsubinterpreters - test_interpreters - test_multiprocessing_spawn - test_tokenize - test_concurrent_futures Failed subtests: - test_idle_process_reuse_multiple - test.test_concurrent_futures.ProcessPoolForkserverProcessPoolExecutorTest - test_still_running - test.test__xxsubinterpreters.DestroyTests - test_still_running - test.test_interpreters.TestInterpreterDestroy - test_subinterpreter - test.test_interpreters.TestInterpreterIsRunning Sincerely, -The Buildbot

1 0

Buildbot failure in Python on AMD64 FreeBSD Non-Debug 3.9
by buildbot＠python.org May 27, 2020

May 27, 2020

The Buildbot has detected a new failure on builder AMD64 FreeBSD Non-Debug 3.9 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#builders/750/builds/9 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: koobs-freebsd-9e36 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== Captured traceback ================== remote: Enumerating objects: 5, done. remote: Counting objects: 20% (1/5) remote: Counting objects: 40% (2/5) remote: Counting objects: 60% (3/5) remote: Counting objects: 80% (4/5) remote: Counting objects: 100% (5/5) remote: Counting objects: 100% (5/5), done. remote: Total 5 (delta 4), reused 4 (delta 4), pack-reused 0 From https://github.com/python/cpython * branch 3.9 -> FETCH_HEAD Reset branch '3.9' test_zipfile64 skipped -- test requires loads of disk-space bytes and a long time to run test_tcl skipped -- No module named '_tkinter' test_tk skipped -- No module named '_tkinter' test_winsound skipped -- No module named 'winsound' /usr/home/buildbot/python/3.9.koobs-freebsd-9e36.nondebug/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 1 leaked shared_memory objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' /usr/home/buildbot/python/3.9.koobs-freebsd-9e36.nondebug/build/Lib/multiprocessing/resource_tracker.py:229: UserWarning: resource_tracker: '/psm_b5462c10': [Errno 2] No such file or directory: '/psm_b5462c10' warnings.warn('resource_tracker: %r: %s' % (name, e)) test_devpoll skipped -- test works only on Solaris OS family /tmp/tmpv53t4e4h/parse.c:136:19: warning: code will never be executed [-Wunreachable-code] p->mark = _mark; ^~~~~ 1 warning generated. test_tix skipped -- No module named '_tkinter' test_winconsoleio skipped -- test only relevant on win32 test_idle skipped -- No module named '_tkinter' test_dbm_gnu skipped -- No module named '_gdbm' test_ossaudiodev skipped -- [Errno 2] No such file or directory: '/dev/dsp' test_flock (__main__.FNTLEINTRTest) ... ok test_lockf (__main__.FNTLEINTRTest) ... ok test_read (__main__.OSEINTRTest) ... ok test_wait (__main__.OSEINTRTest) ... ok test_wait3 (__main__.OSEINTRTest) ... ok test_wait4 (__main__.OSEINTRTest) ... ok test_waitpid (__main__.OSEINTRTest) ... ok test_write (__main__.OSEINTRTest) ... ok test_devpoll (__main__.SelectEINTRTest) ... skipped 'need select.devpoll' test_epoll (__main__.SelectEINTRTest) ... skipped 'need select.epoll' test_kqueue (__main__.SelectEINTRTest) ... ok test_poll (__main__.SelectEINTRTest) ... ok test_select (__main__.SelectEINTRTest) ... ok test_sigtimedwait (__main__.SignalEINTRTest) ... ok test_sigwaitinfo (__main__.SignalEINTRTest) ... ok test_accept (__main__.SocketEINTRTest) ... ok test_open (__main__.SocketEINTRTest) ... ok test_os_open (__main__.SocketEINTRTest) ... ok test_recv (__main__.SocketEINTRTest) ... ok test_recvmsg (__main__.SocketEINTRTest) ... ok test_send (__main__.SocketEINTRTest) ... ok test_sendall (__main__.SocketEINTRTest) ... ok test_sendmsg (__main__.SocketEINTRTest) ... ok test_sleep (__main__.TimeEINTRTest) ... ok ---------------------------------------------------------------------- Ran 24 tests in 10.477s OK (skipped=2) test_turtle skipped -- No module named '_tkinter' test_ioctl skipped -- Unable to open /dev/tty test_winreg skipped -- No module named 'winreg' test_startfile skipped -- object <module 'os' from '/usr/home/buildbot/python/3.9.koobs-freebsd-9e36.nondebug/build/Lib/os.py'> has no attribute 'startfile' test_epoll skipped -- test works only on Linux 2.6 test_ttk_guionly skipped -- No module named '_tkinter' test_spwd skipped -- No module named 'spwd' test_msilib skipped -- No module named '_msi' test_ttk_textonly skipped -- No module named '_tkinter' /usr/home/buildbot/python/3.9.koobs-freebsd-9e36.nondebug/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 1 leaked shared_memory objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' /usr/home/buildbot/python/3.9.koobs-freebsd-9e36.nondebug/build/Lib/multiprocessing/resource_tracker.py:229: UserWarning: resource_tracker: '/psm_f435f382': [Errno 2] No such file or directory: '/psm_f435f382' warnings.warn('resource_tracker: %r: %s' % (name, e)) Cannot open file '/usr/home/buildbot/python/3.9.koobs-freebsd-9e36.nondebug/build/test-results.xml' for upload Test report =========== Sincerely, -The Buildbot

1 0

Buildbot failure in Python on s390x SLES 3.x
by buildbot＠python.org May 27, 2020

May 27, 2020

The Buildbot has detected a new failure on builder s390x SLES 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#builders/6/builds/1164 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-sles-z Build Reason: <unknown> Blamelist: Oleg Höfling <hoefling(a)users.noreply.github.com>, Pablo Galindo <Pablogsal(a)gmail.com>, Xavier Fernandez <xav.fernandez(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Tests result: FAILURE then ENV CHANGED == 409 tests OK. 10 slowest tests: - test_multiprocessing_spawn: 3 min 39 sec - test_concurrent_futures: 3 min 17 sec - test_unparse: 2 min 12 sec - test_tokenize: 2 min 5 sec - test_capi: 1 min 45 sec - test_multiprocessing_forkserver: 1 min 40 sec - test_asyncio: 1 min 38 sec - test_signal: 1 min 37 sec - test_peg_generator: 1 min 23 sec - test_multiprocessing_fork: 1 min 22 sec 1 test altered the execution environment: test_asyncio 15 tests skipped: test_devpoll test_ioctl test_kqueue test_msilib test_ossaudiodev test_readline test_sqlite test_startfile test_tix test_tk test_ttk_guionly test_winconsoleio test_winreg test_winsound test_zipfile64 1 re-run test: test_signal Total duration: 9 min 21 sec Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-sles-z/build/Lib/test/test_signal.py", line 1211, in test_stress_delivery_dependent self.assertEqual(len(sigs), N, "Some signals were lost") AssertionError: 6831 != 10000 : Some signals were lost Test report =========== Failed tests: - test_signal Sincerely, -The Buildbot

1 0

Buildbot failure in Python on PPC64LE Fedora Rawhide Refleaks 3.x
by buildbot＠python.org May 27, 2020

May 27, 2020

The Buildbot has detected a new failure on builder PPC64LE Fedora Rawhide Refleaks 3.x while building Python. Full details are available at: https://buildbot.python.org/all/#builders/441/builds/526 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-rawhide-ppc64le Build Reason: <unknown> Blamelist: BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Tests result: FAILURE then FAILURE == 411 tests OK. 10 slowest tests: - test_signal: 31 min - test_pydoc: 29 min 44 sec - test_concurrent_futures: 19 min 51 sec - test_multiprocessing_spawn: 14 min 1 sec - test_peg_generator: 11 min 40 sec - test_multiprocessing_forkserver: 9 min 18 sec - test_multiprocessing_fork: 7 min 21 sec - test_gdb: 6 min 48 sec - test_nntplib: 6 min 15 sec - test_pickle: 4 min 52 sec 1 test failed: test_interpreters 13 tests skipped: test_devpoll test_ioctl test_kqueue test_msilib test_ossaudiodev test_startfile test_tix test_tk test_ttk_guionly test_winconsoleio test_winreg test_winsound test_zipfile64 2 re-run tests: test_asyncio test_interpreters Total duration: 3 hour 35 min Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory . Test report =========== Failed tests: - test_interpreters Test leaking resources: - test_interpreters: memory blocks - test_interpreters: references Sincerely, -The Buildbot

1 0