Mailman 3 October 2023 - Buildbot-status

☠ Buildbot (Python): python/cpython - failed test (failure) (main)
by buildbot＠python.org 31 Oct '23

31 Oct '23

The Buildbot has detected a new failure on builder AMD64 Ubuntu NoGIL Refleaks 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1226/builds/410 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: itamaro-ubuntu-aws Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com>, Artyom Romanov <92092049+art3xa(a)users.noreply.github.com>, Ayappan Perumal <ayappap2(a)in.ibm.com>, Barney Gale <barney.gale(a)gmail.com>, Batuhan Taskaya <isidentical(a)gmail.com>, Brandt Bucher <brandtbucher(a)microsoft.com>, Dima Tisnek <dimaqq(a)gmail.com>, Dino Viehland <dinoviehland(a)fb.com>, Don Patterson <37046246+don-patterson(a)users.noreply.github.com>, Donghee Na <donghee.na(a)python.org>, Eric Snow <ericsnowcurrently(a)gmail.com>, Erlend E. Aasland <erlend(a)python.org>, Evan Kohilas <ekohilas(a)users.noreply.github.com>, Furkan Onder <furkanonder(a)protonmail.com>, Gouvernathor <44340603+Gouvernathor(a)users.noreply.github.com>, Guido van Rossum <guido(a)python.org>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, InSync <122007197+InSyncWithFoo(a)users.noreply.github.com>, Irit Katriel <1055913+iritkatriel(a)users.noreply.github.com>, James Tocknell <aragilar+github(a)gmail.com>, Jochen Sprickerhof <github(a)jochen.sprickerhof.de>, Jokimax <776809 01+Jokimax(a)users.noreply.github.com>, Jonathan Berthias <jvberthias(a)gmail.com>, Karolina Surma <33810531+befeleme(a)users.noreply.github.com>, Ken Jin <kenjin(a)python.org>, Khalil Mouawad <99619908+khlmood(a)users.noreply.github.com>, Kirill Podoprigora <kirill.bast9(a)mail.ru>, Maciej Olko <maciej.olko(a)affirm.com>, Mark Shannon <mark(a)hotpy.org>, Michael Droettboom <mdboom(a)gmail.com>, NCLI <45665319+NCLI(a)users.noreply.github.com>, Ned Batchelder <ned(a)nedbatchelder.com>, Nick <Nikki1993(a)users.noreply.github.com>, Nikita Sobolev <mail(a)sobolevn.me>, Pablo Galindo Salgado <Pablogsal(a)gmail.com>, Pablo Martí Gamboa <pablo(a)cointracker.com>, Pavel Karateev <lancelote.du.lac(a)gmail.com>, Prometheus3375 <35541026+Prometheus3375(a)users.noreply.github.com>, Quentin Peter <impact27(a)users.noreply.github.com>, Radislav Chugunov <52372310+chgnrdv(a)users.noreply.github.com>, Raymond Hettinger <rhettinger(a)users.noreply.github.com>, Riccardo Ghetta <rghe(a)users.noreply.github.com>, Sam Gross <colesbury(a)gmail.co m>, Satish Pokala <49762924+Satishpokala124(a)users.noreply.github.com>, Savannah Ostrowski <savannahostrowski(a)gmail.com>, Savannah Ostrowski <sostrowski(a)microsoft.com>, Sergey B Kirpichev <skirpichev(a)gmail.com>, Serhiy Storchaka <storchaka(a)gmail.com>, Tamás Hegedűs <sorgloomer(a)users.noreply.github.com>, Terry Jan Reedy <tjreedy(a)udel.edu>, Tian Gao <gaogaotiantian(a)hotmail.com>, Victor Stinner <vstinner(a)python.org>, YAMAMOTO Takashi <yamamoto(a)midokura.com>, Zachary Ware <zach(a)python.org>, Zack Cerza <zack(a)cerza.org>, c-bata <c-bata(a)users.noreply.github.com>, gsallam <123525874+gsallam(a)users.noreply.github.com>, hetmankp <728670+hetmankp(a)users.noreply.github.com>, sc07kvm <sc07kvmxoma(a)mail.ru>, scoder <stefan_ml(a)behnel.de>, xzmeng <aumo(a)foxmail.com>, zcxsythenew <30565051+zcxsythenew(a)users.noreply.github.com>, Łukasz Langa <lukasz(a)langa.pl> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=2853954) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/resource_tracker.py:254: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown: {'/mp-wivfnm2n', '/mp-hm3kti7r', '/mp-adfm3iua', '/mp-3ql_42ic', '/mp-6901_neh', '/mp-8jznnsr5'} warnings.warn( Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=2853954) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/resource_tracker.py:254: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown: {'/mp-o99mc3i6', '/mp-rroqiljc', '/mp-rxjzhjfb', '/mp-s2xslxqk', '/mp-lgvegkf5', '/mp-8p_1g7wp'} warnings.warn( Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=2853954) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/resource_tracker.py:254: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown: {'/mp-6rv9kei1', '/mp-mcmdd7i8', '/mp-u0efg7vu', '/mp-bhlr62sd', '/mp-f9u89zg_', '/mp-hrr9sjtb'} warnings.warn( Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=2853954) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/resource_tracker.py:254: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown: {'/mp-kgto1fmp', '/mp-8kofz2jw', '/mp-38hkuv05', '/mp-3j3qcj6w', '/mp-wyhx3kz6', '/mp-yv_f89zk'} warnings.warn( Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=2853954) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/resource_tracker.py:254: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown: {'/mp-7i96w50i', '/mp-dik8ucfh', '/mp-3g2ni_dg', '/mp-cknkgrsv', '/mp-l50m8ap_', '/mp-0taert_u'} warnings.warn( Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory . Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 34 is closed Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 34 is closed .Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 105 is closed Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 105 is closed .Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 176 is closed Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 176 is closed .Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 247 is closed Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 247 is closed .Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 318 is closed Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 318 is closed .Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 389 is closed Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 389 is closed . Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters . Traceback (most recent call last): File "<string>", line 13, in <module> File "<frozen importlib._bootstrap>", line 813, in module_from_spec File "<frozen importlib._bootstrap_external>", line 1302, in create_module File "<frozen importlib._bootstrap>", line 488, in _call_with_frames_removed ImportError: module _test_shared_gil_only does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 13, in <module> File "<frozen importlib._bootstrap>", line 813, in module_from_spec File "<frozen importlib._bootstrap_external>", line 1302, in create_module File "<frozen importlib._bootstrap>", line 488, in _call_with_frames_removed ImportError: module _test_shared_gil_only does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 13, in <module> File "<frozen importlib._bootstrap>", line 813, in module_from_spec File "<frozen importlib._bootstrap_external>", line 1302, in create_module File "<frozen importlib._bootstrap>", line 488, in _call_with_frames_removed ImportError: module _test_shared_gil_only does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 13, in <module> File "<frozen importlib._bootstrap>", line 813, in module_from_spec File "<frozen importlib._bootstrap_external>", line 1302, in create_module File "<frozen importlib._bootstrap>", line 488, in _call_with_frames_removed ImportError: module _test_shared_gil_only does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 13, in <module> File "<frozen importlib._bootstrap>", line 813, in module_from_spec File "<frozen importlib._bootstrap_external>", line 1302, in create_module File "<frozen importlib._bootstrap>", line 488, in _call_with_frames_removed ImportError: module _test_shared_gil_only does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 13, in <module> File "<frozen importlib._bootstrap>", line 813, in module_from_spec File "<frozen importlib._bootstrap_external>", line 1302, in create_module File "<frozen importlib._bootstrap>", line 488, in _call_with_frames_removed ImportError: module _test_shared_gil_only does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters . Traceback (most recent call last): File "<string>", line 1, in <module> SystemExit: 42 Traceback (most recent call last): File "<string>", line 1, in <module> Exception: spam File "<string>", line 1 print("spam" ^ SyntaxError: '(' was never closed Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit: 42 .Traceback (most recent call last): File "<string>", line 1, in <module> SystemExit: 42 Traceback (most recent call last): File "<string>", line 1, in <module> Exception: spam File "<string>", line 1 print("spam" ^ SyntaxError: '(' was never closed Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit: 42 .Traceback (most recent call last): File "<string>", line 1, in <module> SystemExit: 42 Traceback (most recent call last): File "<string>", line 1, in <module> Exception: spam File "<string>", line 1 print("spam" ^ SyntaxError: '(' was never closed Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit: 42 .Traceback (most recent call last): File "<string>", line 1, in <module> SystemExit: 42 Traceback (most recent call last): File "<string>", line 1, in <module> Exception: spam File "<string>", line 1 print("spam" ^ SyntaxError: '(' was never closed Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit: 42 .Traceback (most recent call last): File "<string>", line 1, in <module> SystemExit: 42 Traceback (most recent call last): File "<string>", line 1, in <module> Exception: spam File "<string>", line 1 print("spam" ^ SyntaxError: '(' was never closed Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit: 42 .Traceback (most recent call last): File "<string>", line 1, in <module> SystemExit: 42 Traceback (most recent call last): File "<string>", line 1, in <module> Exception: spam File "<string>", line 1 print("spam" ^ SyntaxError: '(' was never closed Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit: 42 . Test report =========== Failed tests: - test.test_multiprocessing_forkserver.test_threads - test.test_multiprocessing_spawn.test_threads Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Fedora Rawhide LTO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/375/builds/5120 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-rawhide-x86_64 Build Reason: <unknown> Blamelist: Dino Viehland <dinoviehland(a)fb.com>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, Prometheus3375 <35541026+Prometheus3375(a)users.noreply.github.com>, Quentin Peter <impact27(a)users.noreply.github.com>, xzmeng <aumo(a)foxmail.com> BUILD FAILED: failed compile (failure) Summary of the results of the build (if available): =================================================== Captured traceback ================== remote: Enumerating objects: 39, done. remote: Counting objects: 2% (1/38) remote: Counting objects: 5% (2/38) remote: Counting objects: 7% (3/38) remote: Counting objects: 10% (4/38) remote: Counting objects: 13% (5/38) remote: Counting objects: 15% (6/38) remote: Counting objects: 18% (7/38) remote: Counting objects: 21% (8/38) remote: Counting objects: 23% (9/38) remote: Counting objects: 26% (10/38) remote: Counting objects: 28% (11/38) remote: Counting objects: 31% (12/38) remote: Counting objects: 34% (13/38) remote: Counting objects: 36% (14/38) remote: Counting objects: 39% (15/38) remote: Counting objects: 42% (16/38) remote: Counting objects: 44% (17/38) remote: Counting objects: 47% (18/38) remote: Counting objects: 50% (19/38) remote: Counting objects: 52% (20/38) remote: Counting objects: 55% (21/38) remote: Counting objects: 57% (22/38) remote: Counting objects: 60% (23/38) remote: Counting objects: 63% (24/38) remote: Counting objects: 65% (25/38) remote: Counting objects: 68% (26/38) remote: Counting objects: 71% (27/38) remote: Counting objects: 73% (28/38) remote: Counting objects: 76% (29/38) remote: Counting objects: 78% (30/38) remote: Counting objects: 81% (31/38) remote: Counting objects: 84% (32/38) remote: Counting objects: 86% (33/38) remote: Counting objects: 89% (34/38) remote: Counting objects: 92% (35/38) remote: Counting objects: 94% (36/38) remote: Counting objects: 97% (37/38) remote: Counting objects: 100% (38/38) remote: Counting objects: 100% (38/38), done. remote: Compressing objects: 5% (1/20) remote: Compressing objects: 10% (2/20) remote: Compressing objects: 15% (3/20) remote: Compressing objects: 20% (4/20) remote: Compressing objects: 25% (5/20) remote: Compressing objects: 30% (6/20) remote: Compressing objects: 35% (7/20) remote: Compressing objects: 40% (8/20) remote: Compressing objects: 45% (9/20) remote: Compressing objects: 50% (10/20) remote: Compressing objects: 55% (11/20) remote: Compressing objects: 60% (12/20) remote: Compressing objects: 65% (13/20) remote: Compressing objects: 70% (14/20) remote: Compressing objects: 75% (15/20) remote: Compressing objects: 80% (16/20) remote: Compressing objects: 85% (17/20) remote: Compressing objects: 90% (18/20) remote: Compressing objects: 95% (19/20) remote: Compressing objects: 100% (20/20) remote: Compressing objects: 100% (20/20), done. remote: Total 39 (delta 19), reused 28 (delta 18), pack-reused 1 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'c42347d025b29e993a12925a3ddf58c0c9bb7f7b'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at c42347d025 gh-90815: Exclude mimalloc .c files from Windows build (#111532) Switched to and reset branch 'main' In file included from Python/ceval.c:773: Python/generated_cases.c.h: In function ‘_PyEval_EvalFrameDefault’: Python/generated_cases.c.h:896:27: warning: unused variable ‘this_instr’ [-Wunused-variable] 896 | _Py_CODEUNIT *this_instr = frame->instr_ptr = next_instr; | ^~~~~~~~~~ Python/generated_cases.c.h:1436:27: warning: unused variable ‘this_instr’ [-Wunused-variable] 1436 | _Py_CODEUNIT *this_instr = frame->instr_ptr = next_instr; | ^~~~~~~~~~ Python/generated_cases.c.h:3827:27: warning: unused variable ‘this_instr’ [-Wunused-variable] 3827 | _Py_CODEUNIT *this_instr = frame->instr_ptr = next_instr; | ^~~~~~~~~~ In function ‘_io_FileIO_close_impl’, inlined from ‘_io_FileIO_close’ at ./Modules/_io/clinic/fileio.c.h:34:12: ./Modules/_io/fileio.c:175:9: warning: ‘exc’ may be used uninitialized [-Wmaybe-uninitialized] 175 | _PyErr_ChainExceptions1(exc); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/_io/fileio.c: In function ‘_io_FileIO_close’: ./Modules/_io/fileio.c:160:15: note: ‘exc’ was declared here 160 | PyObject *exc; | ^~~ In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:356:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 356 | case 18: EXTRACT_DIGIT(s, x, 100000000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:356:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 356 | case 18: EXTRACT_DIGIT(s, x, 100000000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero ar: unable to copy file 'libpython3.13.a'; reason: No space left on device make: *** [Makefile:994: libpython3.13.a] Error 1 Test report =========== Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Fedora Rawhide LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/79/builds/5920 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-rawhide-x86_64 Build Reason: <unknown> Blamelist: Dino Viehland <dinoviehland(a)fb.com>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, Prometheus3375 <35541026+Prometheus3375(a)users.noreply.github.com>, Quentin Peter <impact27(a)users.noreply.github.com>, xzmeng <aumo(a)foxmail.com> BUILD FAILED: failed compile (failure) Summary of the results of the build (if available): =================================================== Captured traceback ================== remote: Enumerating objects: 39, done. remote: Counting objects: 2% (1/38) remote: Counting objects: 5% (2/38) remote: Counting objects: 7% (3/38) remote: Counting objects: 10% (4/38) remote: Counting objects: 13% (5/38) remote: Counting objects: 15% (6/38) remote: Counting objects: 18% (7/38) remote: Counting objects: 21% (8/38) remote: Counting objects: 23% (9/38) remote: Counting objects: 26% (10/38) remote: Counting objects: 28% (11/38) remote: Counting objects: 31% (12/38) remote: Counting objects: 34% (13/38) remote: Counting objects: 36% (14/38) remote: Counting objects: 39% (15/38) remote: Counting objects: 42% (16/38) remote: Counting objects: 44% (17/38) remote: Counting objects: 47% (18/38) remote: Counting objects: 50% (19/38) remote: Counting objects: 52% (20/38) remote: Counting objects: 55% (21/38) remote: Counting objects: 57% (22/38) remote: Counting objects: 60% (23/38) remote: Counting objects: 63% (24/38) remote: Counting objects: 65% (25/38) remote: Counting objects: 68% (26/38) remote: Counting objects: 71% (27/38) remote: Counting objects: 73% (28/38) remote: Counting objects: 76% (29/38) remote: Counting objects: 78% (30/38) remote: Counting objects: 81% (31/38) remote: Counting objects: 84% (32/38) remote: Counting objects: 86% (33/38) remote: Counting objects: 89% (34/38) remote: Counting objects: 92% (35/38) remote: Counting objects: 94% (36/38) remote: Counting objects: 97% (37/38) remote: Counting objects: 100% (38/38) remote: Counting objects: 100% (38/38), done. remote: Compressing objects: 5% (1/20) remote: Compressing objects: 10% (2/20) remote: Compressing objects: 15% (3/20) remote: Compressing objects: 20% (4/20) remote: Compressing objects: 25% (5/20) remote: Compressing objects: 30% (6/20) remote: Compressing objects: 35% (7/20) remote: Compressing objects: 40% (8/20) remote: Compressing objects: 45% (9/20) remote: Compressing objects: 50% (10/20) remote: Compressing objects: 55% (11/20) remote: Compressing objects: 60% (12/20) remote: Compressing objects: 65% (13/20) remote: Compressing objects: 70% (14/20) remote: Compressing objects: 75% (15/20) remote: Compressing objects: 80% (16/20) remote: Compressing objects: 85% (17/20) remote: Compressing objects: 90% (18/20) remote: Compressing objects: 95% (19/20) remote: Compressing objects: 100% (20/20) remote: Compressing objects: 100% (20/20), done. remote: Total 39 (delta 19), reused 28 (delta 18), pack-reused 1 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'c42347d025b29e993a12925a3ddf58c0c9bb7f7b'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at c42347d025 gh-90815: Exclude mimalloc .c files from Windows build (#111532) Switched to and reset branch 'main' find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [Makefile:2853: clean-retain-profile] Error 1 (ignored) In file included from Python/ceval.c:773: Python/generated_cases.c.h: In function ‘_PyEval_EvalFrameDefault’: Python/generated_cases.c.h:896:27: warning: unused variable ‘this_instr’ [-Wunused-variable] 896 | _Py_CODEUNIT *this_instr = frame->instr_ptr = next_instr; | ^~~~~~~~~~ Python/generated_cases.c.h:1436:27: warning: unused variable ‘this_instr’ [-Wunused-variable] 1436 | _Py_CODEUNIT *this_instr = frame->instr_ptr = next_instr; | ^~~~~~~~~~ Python/generated_cases.c.h:3827:27: warning: unused variable ‘this_instr’ [-Wunused-variable] 3827 | _Py_CODEUNIT *this_instr = frame->instr_ptr = next_instr; | ^~~~~~~~~~ In function ‘_io_FileIO_close_impl’, inlined from ‘_io_FileIO_close’ at ./Modules/_io/clinic/fileio.c.h:34:12: ./Modules/_io/fileio.c:175:9: warning: ‘exc’ may be used uninitialized [-Wmaybe-uninitialized] 175 | _PyErr_ChainExceptions1(exc); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/_io/fileio.c: In function ‘_io_FileIO_close’: ./Modules/_io/fileio.c:160:15: note: ‘exc’ was declared here 160 | PyObject *exc; | ^~~ ar: libpython3.13.a: error reading Modules/_collectionsmodule.o: No space left on device make[2]: *** [Makefile:994: libpython3.13.a] Error 1 make[1]: *** [Makefile:824: profile-gen-stamp] Error 2 make: *** [Makefile:836: profile-run-stamp] Error 2 Test report =========== Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Fedora Rawhide Clang Installed 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/536/builds/5550 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-rawhide-x86_64 Build Reason: <unknown> Blamelist: Dino Viehland <dinoviehland(a)fb.com>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, Prometheus3375 <35541026+Prometheus3375(a)users.noreply.github.com>, Quentin Peter <impact27(a)users.noreply.github.com>, xzmeng <aumo(a)foxmail.com> BUILD FAILED: failed Installed (failure) Summary of the results of the build (if available): =================================================== Captured traceback ================== remote: Enumerating objects: 39, done. remote: Counting objects: 2% (1/38) remote: Counting objects: 5% (2/38) remote: Counting objects: 7% (3/38) remote: Counting objects: 10% (4/38) remote: Counting objects: 13% (5/38) remote: Counting objects: 15% (6/38) remote: Counting objects: 18% (7/38) remote: Counting objects: 21% (8/38) remote: Counting objects: 23% (9/38) remote: Counting objects: 26% (10/38) remote: Counting objects: 28% (11/38) remote: Counting objects: 31% (12/38) remote: Counting objects: 34% (13/38) remote: Counting objects: 36% (14/38) remote: Counting objects: 39% (15/38) remote: Counting objects: 42% (16/38) remote: Counting objects: 44% (17/38) remote: Counting objects: 47% (18/38) remote: Counting objects: 50% (19/38) remote: Counting objects: 52% (20/38) remote: Counting objects: 55% (21/38) remote: Counting objects: 57% (22/38) remote: Counting objects: 60% (23/38) remote: Counting objects: 63% (24/38) remote: Counting objects: 65% (25/38) remote: Counting objects: 68% (26/38) remote: Counting objects: 71% (27/38) remote: Counting objects: 73% (28/38) remote: Counting objects: 76% (29/38) remote: Counting objects: 78% (30/38) remote: Counting objects: 81% (31/38) remote: Counting objects: 84% (32/38) remote: Counting objects: 86% (33/38) remote: Counting objects: 89% (34/38) remote: Counting objects: 92% (35/38) remote: Counting objects: 94% (36/38) remote: Counting objects: 97% (37/38) remote: Counting objects: 100% (38/38) remote: Counting objects: 100% (38/38), done. remote: Compressing objects: 5% (1/20) remote: Compressing objects: 10% (2/20) remote: Compressing objects: 15% (3/20) remote: Compressing objects: 20% (4/20) remote: Compressing objects: 25% (5/20) remote: Compressing objects: 30% (6/20) remote: Compressing objects: 35% (7/20) remote: Compressing objects: 40% (8/20) remote: Compressing objects: 45% (9/20) remote: Compressing objects: 50% (10/20) remote: Compressing objects: 55% (11/20) remote: Compressing objects: 60% (12/20) remote: Compressing objects: 65% (13/20) remote: Compressing objects: 70% (14/20) remote: Compressing objects: 75% (15/20) remote: Compressing objects: 80% (16/20) remote: Compressing objects: 85% (17/20) remote: Compressing objects: 90% (18/20) remote: Compressing objects: 95% (19/20) remote: Compressing objects: 100% (20/20) remote: Compressing objects: 100% (20/20), done. remote: Total 39 (delta 19), reused 28 (delta 18), pack-reused 1 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'c42347d025b29e993a12925a3ddf58c0c9bb7f7b'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at c42347d025 gh-90815: Exclude mimalloc .c files from Windows build (#111532) Switched to and reset branch 'main' In file included from Python/ceval.c:773: Python/generated_cases.c.h:896:27: warning: unused variable 'this_instr' [-Wunused-variable] 896 | _Py_CODEUNIT *this_instr = frame->instr_ptr = next_instr; | ^~~~~~~~~~ Python/generated_cases.c.h:1436:27: warning: unused variable 'this_instr' [-Wunused-variable] 1436 | _Py_CODEUNIT *this_instr = frame->instr_ptr = next_instr; | ^~~~~~~~~~ Python/generated_cases.c.h:3827:27: warning: unused variable 'this_instr' [-Wunused-variable] 3827 | _Py_CODEUNIT *this_instr = frame->instr_ptr = next_instr; | ^~~~~~~~~~ Python/ceval_gil.c:429:1: warning: unused function 'current_thread_holds_gil' [-Wunused-function] 429 | current_thread_holds_gil(struct _gil_runtime_state *gil, PyThreadState *tstate) | ^~~~~~~~~~~~~~~~~~~~~~~~ 1 warning generated. Python/optimizer.c:428:9: warning: variable 'reserved' set but not used [-Wunused-but-set-variable] 428 | int reserved = 0; | ^ 1 warning generated. 3 warnings generated. ./Modules/expat/xmlparse.c:3116:9: warning: code will never be executed [-Wunreachable-code] 3116 | parser->m_characterDataHandler(parser->m_handlerArg, parser->m_dataBuf, | ^~~~~~ ./Modules/expat/xmlparse.c:3115:16: note: silence by adding parentheses to mark code as explicitly dead 3115 | else if (0 && parser->m_characterDataHandler) | ^ | /* DISABLES CODE */ ( ) ./Modules/expat/xmlparse.c:4059:9: warning: code will never be executed [-Wunreachable-code] 4059 | parser->m_characterDataHandler(parser->m_handlerArg, parser->m_dataBuf, | ^~~~~~ ./Modules/expat/xmlparse.c:4058:16: note: silence by adding parentheses to mark code as explicitly dead 4058 | else if (0 && parser->m_characterDataHandler) | ^ | /* DISABLES CODE */ ( ) 2 warnings generated. make: [Makefile:2455: libinstall] Error 1 (ignored) ERROR: Could not install packages due to an OSError: [Errno 28] No space left on device: '/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-x86_64.clang-installed/build/target/lib/python3.13/site-packages/pip' Traceback (most recent call last): File "<frozen runpy>", line 198, in _run_module_as_main File "<frozen runpy>", line 88, in _run_code File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-x86_64.clang-installed/build/Lib/ensurepip/__main__.py", line 5, in <module> sys.exit(ensurepip._main()) ^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-x86_64.clang-installed/build/Lib/ensurepip/__init__.py", line 284, in _main return _bootstrap( ^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-x86_64.clang-installed/build/Lib/ensurepip/__init__.py", line 200, in _bootstrap return _run_pip([*args, *_PACKAGE_NAMES], additional_paths) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-x86_64.clang-installed/build/Lib/ensurepip/__init__.py", line 101, in _run_pip return subprocess.run(cmd, check=True).returncode ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-x86_64.clang-installed/build/Lib/subprocess.py", line 571, in run raise CalledProcessError(retcode, process.args, subprocess.CalledProcessError: Command '['/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-x86_64.clang-installed/build/python', '-W', 'ignore::DeprecationWarning', '-c', '\nimport runpy\nimport sys\nsys.path = [\'/tmp/tmpysjoc86b/pip-23.2.1-py3-none-any.whl\'] + sys.path\nsys.argv[1:] = [\'install\', \'--no-cache-dir\', \'--no-index\', \'--find-links\', \'/tmp/tmpysjoc86b\', \'--root\', \'/\', \'--upgrade\', \'pip\']\nrunpy.run_module("pip", run_name="__main__", alter_sys=True)\n']' returned non-zero exit status 1. make: *** [Makefile:2108: install] Error 1 Test report =========== Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed compile (failure) (3.12)
by buildbot＠python.org 31 Oct '23

31 Oct '23

The Buildbot has detected a new failure on builder s390x Fedora Rawhide LTO 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1128/builds/305 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-rawhide-z Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com>, Pablo Galindo Salgado <Pablogsal(a)gmail.com> BUILD FAILED: failed compile (failure) Summary of the results of the build (if available): =================================================== Captured traceback ================== remote: Enumerating objects: 32, done. remote: Counting objects: 3% (1/31) remote: Counting objects: 6% (2/31) remote: Counting objects: 9% (3/31) remote: Counting objects: 12% (4/31) remote: Counting objects: 16% (5/31) remote: Counting objects: 19% (6/31) remote: Counting objects: 22% (7/31) remote: Counting objects: 25% (8/31) remote: Counting objects: 29% (9/31) remote: Counting objects: 32% (10/31) remote: Counting objects: 35% (11/31) remote: Counting objects: 38% (12/31) remote: Counting objects: 41% (13/31) remote: Counting objects: 45% (14/31) remote: Counting objects: 48% (15/31) remote: Counting objects: 51% (16/31) remote: Counting objects: 54% (17/31) remote: Counting objects: 58% (18/31) remote: Counting objects: 61% (19/31) remote: Counting objects: 64% (20/31) remote: Counting objects: 67% (21/31) remote: Counting objects: 70% (22/31) remote: Counting objects: 74% (23/31) remote: Counting objects: 77% (24/31) remote: Counting objects: 80% (25/31) remote: Counting objects: 83% (26/31) remote: Counting objects: 87% (27/31) remote: Counting objects: 90% (28/31) remote: Counting objects: 93% (29/31) remote: Counting objects: 96% (30/31) remote: Counting objects: 100% (31/31) remote: Counting objects: 100% (31/31), done. remote: Compressing objects: 4% (1/24) remote: Compressing objects: 8% (2/24) remote: Compressing objects: 12% (3/24) remote: Compressing objects: 16% (4/24) remote: Compressing objects: 20% (5/24) remote: Compressing objects: 25% (6/24) remote: Compressing objects: 29% (7/24) remote: Compressing objects: 33% (8/24) remote: Compressing objects: 37% (9/24) remote: Compressing objects: 41% (10/24) remote: Compressing objects: 45% (11/24) remote: Compressing objects: 50% (12/24) remote: Compressing objects: 54% (13/24) remote: Compressing objects: 58% (14/24) remote: Compressing objects: 62% (15/24) remote: Compressing objects: 66% (16/24) remote: Compressing objects: 70% (17/24) remote: Compressing objects: 75% (18/24) remote: Compressing objects: 79% (19/24) remote: Compressing objects: 83% (20/24) remote: Compressing objects: 87% (21/24) remote: Compressing objects: 91% (22/24) remote: Compressing objects: 95% (23/24) remote: Compressing objects: 100% (24/24) remote: Compressing objects: 100% (24/24), done. remote: Total 32 (delta 10), reused 18 (delta 7), pack-reused 1 From https://github.com/python/cpython * branch 3.12 -> FETCH_HEAD Note: switching to '4f619e83fe1416c9b8d618533a0aaec0b4443b11'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 4f619e83fe [3.12] gh-109181: Speed up Traceback object creation by lazily compute the line number (GH-111548) (#111551) Switched to and reset branch '3.12' In function ‘_io_FileIO_close_impl’, inlined from ‘_io_FileIO_close’ at ./Modules/_io/clinic/fileio.c.h:33:12: ./Modules/_io/fileio.c:171:9: warning: ‘exc’ may be used uninitialized [-Wmaybe-uninitialized] 171 | _PyErr_ChainExceptions1(exc); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/_io/fileio.c: In function ‘_io_FileIO_close’: ./Modules/_io/fileio.c:156:15: note: ‘exc’ was declared here 156 | PyObject *exc; | ^~~ In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero /tmp/ccpXgWwP.s: Assembler messages: /tmp/ccpXgWwP.s: Fatal error: can't write 3 bytes to section .debug_loclists of Modules/_hacl/Hacl_Hash_SHA2.o: 'No space left on device' /tmp/ccpXgWwP.s: Fatal error: Modules/_hacl/Hacl_Hash_SHA2.o: No such file or directory make: *** [Makefile:1124: Modules/_hacl/Hacl_Hash_SHA2.o] Error 1 make: *** Waiting for unfinished jobs.... Assembler messages: Fatal error: can't create Modules/_blake2/blake2s_impl.o: No space left on device make: *** [Makefile:3046: Modules/_blake2/blake2s_impl.o] Error 1 Assembler messages: Fatal error: can't create Modules/_decimal/libmpdec/mpdecimal.o: No space left on device make: *** [Makefile:1084: Modules/_decimal/libmpdec/mpdecimal.o] Error 1 Assembler messages: Fatal error: can't create Modules/expat/xmltok.o: No space left on device make: *** [Makefile:1113: Modules/expat/xmltok.o] Error 1 Assembler messages: Fatal error: can't create Modules/expat/xmlparse.o: No space left on device make: *** [Makefile:1107: Modules/expat/xmlparse.o] Error 1 find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make: [Makefile:2815: clean-retain-profile] Error 1 (ignored) Test report =========== Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora Rawhide LTO + PGO 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1097/builds/356 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-rawhide-z Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com>, Pablo Galindo Salgado <Pablogsal(a)gmail.com> BUILD FAILED: failed compile (failure) Summary of the results of the build (if available): =================================================== Captured traceback ================== remote: Enumerating objects: 32, done. remote: Counting objects: 3% (1/31) remote: Counting objects: 6% (2/31) remote: Counting objects: 9% (3/31) remote: Counting objects: 12% (4/31) remote: Counting objects: 16% (5/31) remote: Counting objects: 19% (6/31) remote: Counting objects: 22% (7/31) remote: Counting objects: 25% (8/31) remote: Counting objects: 29% (9/31) remote: Counting objects: 32% (10/31) remote: Counting objects: 35% (11/31) remote: Counting objects: 38% (12/31) remote: Counting objects: 41% (13/31) remote: Counting objects: 45% (14/31) remote: Counting objects: 48% (15/31) remote: Counting objects: 51% (16/31) remote: Counting objects: 54% (17/31) remote: Counting objects: 58% (18/31) remote: Counting objects: 61% (19/31) remote: Counting objects: 64% (20/31) remote: Counting objects: 67% (21/31) remote: Counting objects: 70% (22/31) remote: Counting objects: 74% (23/31) remote: Counting objects: 77% (24/31) remote: Counting objects: 80% (25/31) remote: Counting objects: 83% (26/31) remote: Counting objects: 87% (27/31) remote: Counting objects: 90% (28/31) remote: Counting objects: 93% (29/31) remote: Counting objects: 96% (30/31) remote: Counting objects: 100% (31/31) remote: Counting objects: 100% (31/31), done. remote: Compressing objects: 4% (1/24) remote: Compressing objects: 8% (2/24) remote: Compressing objects: 12% (3/24) remote: Compressing objects: 16% (4/24) remote: Compressing objects: 20% (5/24) remote: Compressing objects: 25% (6/24) remote: Compressing objects: 29% (7/24) remote: Compressing objects: 33% (8/24) remote: Compressing objects: 37% (9/24) remote: Compressing objects: 41% (10/24) remote: Compressing objects: 45% (11/24) remote: Compressing objects: 50% (12/24) remote: Compressing objects: 54% (13/24) remote: Compressing objects: 58% (14/24) remote: Compressing objects: 62% (15/24) remote: Compressing objects: 66% (16/24) remote: Compressing objects: 70% (17/24) remote: Compressing objects: 75% (18/24) remote: Compressing objects: 79% (19/24) remote: Compressing objects: 83% (20/24) remote: Compressing objects: 87% (21/24) remote: Compressing objects: 91% (22/24) remote: Compressing objects: 95% (23/24) remote: Compressing objects: 100% (24/24) remote: Compressing objects: 100% (24/24), done. remote: Total 32 (delta 10), reused 18 (delta 7), pack-reused 1 From https://github.com/python/cpython * branch 3.12 -> FETCH_HEAD Note: switching to '4f619e83fe1416c9b8d618533a0aaec0b4443b11'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 4f619e83fe [3.12] gh-109181: Speed up Traceback object creation by lazily compute the line number (GH-111548) (#111551) Switched to and reset branch '3.12' find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [Makefile:2815: clean-retain-profile] Error 1 (ignored) In function ‘_io_FileIO_close_impl’, inlined from ‘_io_FileIO_close’ at ./Modules/_io/clinic/fileio.c.h:33:12: ./Modules/_io/fileio.c:171:9: warning: ‘exc’ may be used uninitialized [-Wmaybe-uninitialized] 171 | _PyErr_ChainExceptions1(exc); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/_io/fileio.c: In function ‘_io_FileIO_close’: ./Modules/_io/fileio.c:156:15: note: ‘exc’ was declared here 156 | PyObject *exc; | ^~~ /tmp/ccrhakCY.s: Assembler messages: /tmp/ccrhakCY.s: Fatal error: can't write 3947 bytes to section .gnu.debuglto_.debug_str of Modules/_functoolsmodule.o: 'No space left on device' /tmp/ccrhakCY.s: Fatal error: Modules/_functoolsmodule.o: No such file or directory make[2]: *** [Makefile:3211: Modules/_functoolsmodule.o] Error 1 make[2]: *** Waiting for unfinished jobs.... /tmp/ccNagrsk.s: Assembler messages: /tmp/ccNagrsk.s: Fatal error: can't write 18 bytes to section .debug_line of Modules/posixmodule.o: 'No space left on device' /tmp/ccNagrsk.s: Fatal error: Modules/posixmodule.o: No such file or directory make[2]: *** [Makefile:3177: Modules/posixmodule.o] Error 1 /tmp/cciJq5lZ.s: Assembler messages: /tmp/cciJq5lZ.s: Fatal error: Modules/itertoolsmodule.o: No space left on device make[2]: *** [Makefile:3197: Modules/itertoolsmodule.o] Error 1 /tmp/ccdH7YVK.s: Assembler messages: /tmp/ccdH7YVK.s: Fatal error: can't write 398 bytes to section .debug_line of Modules/_sre/sre.o: 'No space left on device' /tmp/ccdH7YVK.s: Fatal error: Modules/_sre/sre.o: No such file or directory make[2]: *** [Makefile:3199: Modules/_sre/sre.o] Error 1 make[1]: *** [Makefile:797: profile-gen-stamp] Error 2 make: *** [Makefile:809: profile-run-stamp] Error 2 find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make: [Makefile:2815: clean-retain-profile] Error 1 (ignored) Test report =========== Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora Rawhide Clang Installed 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1133/builds/351 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-rawhide-z Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com>, Pablo Galindo Salgado <Pablogsal(a)gmail.com> BUILD FAILED: failed compile (failure) Uninstalled (failure) Summary of the results of the build (if available): =================================================== Captured traceback ================== remote: Enumerating objects: 32, done. remote: Counting objects: 3% (1/31) remote: Counting objects: 6% (2/31) remote: Counting objects: 9% (3/31) remote: Counting objects: 12% (4/31) remote: Counting objects: 16% (5/31) remote: Counting objects: 19% (6/31) remote: Counting objects: 22% (7/31) remote: Counting objects: 25% (8/31) remote: Counting objects: 29% (9/31) remote: Counting objects: 32% (10/31) remote: Counting objects: 35% (11/31) remote: Counting objects: 38% (12/31) remote: Counting objects: 41% (13/31) remote: Counting objects: 45% (14/31) remote: Counting objects: 48% (15/31) remote: Counting objects: 51% (16/31) remote: Counting objects: 54% (17/31) remote: Counting objects: 58% (18/31) remote: Counting objects: 61% (19/31) remote: Counting objects: 64% (20/31) remote: Counting objects: 67% (21/31) remote: Counting objects: 70% (22/31) remote: Counting objects: 74% (23/31) remote: Counting objects: 77% (24/31) remote: Counting objects: 80% (25/31) remote: Counting objects: 83% (26/31) remote: Counting objects: 87% (27/31) remote: Counting objects: 90% (28/31) remote: Counting objects: 93% (29/31) remote: Counting objects: 96% (30/31) remote: Counting objects: 100% (31/31) remote: Counting objects: 100% (31/31), done. remote: Compressing objects: 4% (1/24) remote: Compressing objects: 8% (2/24) remote: Compressing objects: 12% (3/24) remote: Compressing objects: 16% (4/24) remote: Compressing objects: 20% (5/24) remote: Compressing objects: 25% (6/24) remote: Compressing objects: 29% (7/24) remote: Compressing objects: 33% (8/24) remote: Compressing objects: 37% (9/24) remote: Compressing objects: 41% (10/24) remote: Compressing objects: 45% (11/24) remote: Compressing objects: 50% (12/24) remote: Compressing objects: 54% (13/24) remote: Compressing objects: 58% (14/24) remote: Compressing objects: 62% (15/24) remote: Compressing objects: 66% (16/24) remote: Compressing objects: 70% (17/24) remote: Compressing objects: 75% (18/24) remote: Compressing objects: 79% (19/24) remote: Compressing objects: 83% (20/24) remote: Compressing objects: 87% (21/24) remote: Compressing objects: 91% (22/24) remote: Compressing objects: 95% (23/24) remote: Compressing objects: 100% (24/24) remote: Compressing objects: 100% (24/24), done. remote: Total 32 (delta 10), reused 18 (delta 7), pack-reused 1 From https://github.com/python/cpython * branch 3.12 -> FETCH_HEAD Note: switching to '4f619e83fe1416c9b8d618533a0aaec0b4443b11'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 4f619e83fe [3.12] gh-109181: Speed up Traceback object creation by lazily compute the line number (GH-111548) (#111551) Switched to and reset branch '3.12' configure: WARNING: s390x-ibm-linux-gnu/clang is not supported configure: WARNING: Platform "s390x-ibm-linux-gnu" with compiler "clang" is not supported by the CPython core team, see https://peps.python.org/pep-0011/ for more information. ./Modules/expat/xmlparse.c:3116:9: warning: code will never be executed [-Wunreachable-code] 3116 | parser->m_characterDataHandler(parser->m_handlerArg, parser->m_dataBuf, | ^~~~~~ ./Modules/expat/xmlparse.c:3115:16: note: silence by adding parentheses to mark code as explicitly dead 3115 | else if (0 && parser->m_characterDataHandler) | ^ | /* DISABLES CODE */ ( ) ./Modules/expat/xmlparse.c:4059:9: warning: code will never be executed [-Wunreachable-code] 4059 | parser->m_characterDataHandler(parser->m_handlerArg, parser->m_dataBuf, | ^~~~~~ ./Modules/expat/xmlparse.c:4058:16: note: silence by adding parentheses to mark code as explicitly dead 4058 | else if (0 && parser->m_characterDataHandler) | ^ | /* DISABLES CODE */ ( ) 2 warnings generated. /usr/bin/ld: final link failed: No space left on device clang: error: linker command failed with exit code 1 (use -v to see invocation) make: *** [Makefile:1223: _bootstrap_python] Error 1 make: *** Waiting for unfinished jobs.... chmod: cannot access 'target/': No such file or directory Test report =========== Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora Rawhide Clang 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1131/builds/355 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-rawhide-z Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com>, Pablo Galindo Salgado <Pablogsal(a)gmail.com> BUILD FAILED: failed compile (failure) Summary of the results of the build (if available): =================================================== Captured traceback ================== remote: Enumerating objects: 32, done. remote: Counting objects: 3% (1/31) remote: Counting objects: 6% (2/31) remote: Counting objects: 9% (3/31) remote: Counting objects: 12% (4/31) remote: Counting objects: 16% (5/31) remote: Counting objects: 19% (6/31) remote: Counting objects: 22% (7/31) remote: Counting objects: 25% (8/31) remote: Counting objects: 29% (9/31) remote: Counting objects: 32% (10/31) remote: Counting objects: 35% (11/31) remote: Counting objects: 38% (12/31) remote: Counting objects: 41% (13/31) remote: Counting objects: 45% (14/31) remote: Counting objects: 48% (15/31) remote: Counting objects: 51% (16/31) remote: Counting objects: 54% (17/31) remote: Counting objects: 58% (18/31) remote: Counting objects: 61% (19/31) remote: Counting objects: 64% (20/31) remote: Counting objects: 67% (21/31) remote: Counting objects: 70% (22/31) remote: Counting objects: 74% (23/31) remote: Counting objects: 77% (24/31) remote: Counting objects: 80% (25/31) remote: Counting objects: 83% (26/31) remote: Counting objects: 87% (27/31) remote: Counting objects: 90% (28/31) remote: Counting objects: 93% (29/31) remote: Counting objects: 96% (30/31) remote: Counting objects: 100% (31/31) remote: Counting objects: 100% (31/31), done. remote: Compressing objects: 4% (1/24) remote: Compressing objects: 8% (2/24) remote: Compressing objects: 12% (3/24) remote: Compressing objects: 16% (4/24) remote: Compressing objects: 20% (5/24) remote: Compressing objects: 25% (6/24) remote: Compressing objects: 29% (7/24) remote: Compressing objects: 33% (8/24) remote: Compressing objects: 37% (9/24) remote: Compressing objects: 41% (10/24) remote: Compressing objects: 45% (11/24) remote: Compressing objects: 50% (12/24) remote: Compressing objects: 54% (13/24) remote: Compressing objects: 58% (14/24) remote: Compressing objects: 62% (15/24) remote: Compressing objects: 66% (16/24) remote: Compressing objects: 70% (17/24) remote: Compressing objects: 75% (18/24) remote: Compressing objects: 79% (19/24) remote: Compressing objects: 83% (20/24) remote: Compressing objects: 87% (21/24) remote: Compressing objects: 91% (22/24) remote: Compressing objects: 95% (23/24) remote: Compressing objects: 100% (24/24) remote: Compressing objects: 100% (24/24), done. remote: Total 32 (delta 10), reused 18 (delta 7), pack-reused 1 From https://github.com/python/cpython * branch 3.12 -> FETCH_HEAD Note: switching to '4f619e83fe1416c9b8d618533a0aaec0b4443b11'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 4f619e83fe [3.12] gh-109181: Speed up Traceback object creation by lazily compute the line number (GH-111548) (#111551) Switched to and reset branch '3.12' configure: WARNING: s390x-ibm-linux-gnu/clang is not supported configure: WARNING: Platform "s390x-ibm-linux-gnu" with compiler "clang" is not supported by the CPython core team, see https://peps.python.org/pep-0011/ for more information. /usr/bin/ld: final link failed: No space left on device clang: error: linker command failed with exit code 1 (use -v to see invocation) make: *** [Makefile:1311: Programs/_freeze_module] Error 1 make: *** Waiting for unfinished jobs.... Test report =========== Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora Rawhide 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1160/builds/352 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-rawhide-z Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com>, Pablo Galindo Salgado <Pablogsal(a)gmail.com> BUILD FAILED: failed compile (failure) Summary of the results of the build (if available): =================================================== Captured traceback ================== remote: Enumerating objects: 32, done. remote: Counting objects: 3% (1/31) remote: Counting objects: 6% (2/31) remote: Counting objects: 9% (3/31) remote: Counting objects: 12% (4/31) remote: Counting objects: 16% (5/31) remote: Counting objects: 19% (6/31) remote: Counting objects: 22% (7/31) remote: Counting objects: 25% (8/31) remote: Counting objects: 29% (9/31) remote: Counting objects: 32% (10/31) remote: Counting objects: 35% (11/31) remote: Counting objects: 38% (12/31) remote: Counting objects: 41% (13/31) remote: Counting objects: 45% (14/31) remote: Counting objects: 48% (15/31) remote: Counting objects: 51% (16/31) remote: Counting objects: 54% (17/31) remote: Counting objects: 58% (18/31) remote: Counting objects: 61% (19/31) remote: Counting objects: 64% (20/31) remote: Counting objects: 67% (21/31) remote: Counting objects: 70% (22/31) remote: Counting objects: 74% (23/31) remote: Counting objects: 77% (24/31) remote: Counting objects: 80% (25/31) remote: Counting objects: 83% (26/31) remote: Counting objects: 87% (27/31) remote: Counting objects: 90% (28/31) remote: Counting objects: 93% (29/31) remote: Counting objects: 96% (30/31) remote: Counting objects: 100% (31/31) remote: Counting objects: 100% (31/31), done. remote: Compressing objects: 4% (1/24) remote: Compressing objects: 8% (2/24) remote: Compressing objects: 12% (3/24) remote: Compressing objects: 16% (4/24) remote: Compressing objects: 20% (5/24) remote: Compressing objects: 25% (6/24) remote: Compressing objects: 29% (7/24) remote: Compressing objects: 33% (8/24) remote: Compressing objects: 37% (9/24) remote: Compressing objects: 41% (10/24) remote: Compressing objects: 45% (11/24) remote: Compressing objects: 50% (12/24) remote: Compressing objects: 54% (13/24) remote: Compressing objects: 58% (14/24) remote: Compressing objects: 62% (15/24) remote: Compressing objects: 66% (16/24) remote: Compressing objects: 70% (17/24) remote: Compressing objects: 75% (18/24) remote: Compressing objects: 79% (19/24) remote: Compressing objects: 83% (20/24) remote: Compressing objects: 87% (21/24) remote: Compressing objects: 91% (22/24) remote: Compressing objects: 95% (23/24) remote: Compressing objects: 100% (24/24) remote: Compressing objects: 100% (24/24), done. remote: Total 32 (delta 10), reused 18 (delta 7), pack-reused 1 From https://github.com/python/cpython * branch 3.12 -> FETCH_HEAD Note: switching to '4f619e83fe1416c9b8d618533a0aaec0b4443b11'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 4f619e83fe [3.12] gh-109181: Speed up Traceback object creation by lazily compute the line number (GH-111548) (#111551) Switched to and reset branch '3.12' Objects/longobject.c: In function ‘long_format_binary’: Objects/longobject.c:2122:13: warning: ‘kind’ may be used uninitialized [-Wmaybe-uninitialized] 2122 | else if (kind == PyUnicode_1BYTE_KIND) { | ^ Objects/longobject.c:1998:9: note: ‘kind’ was declared here 1998 | int kind; | ^~~~ Objects/longobject.c: In function ‘long_to_decimal_string_internal’: Objects/longobject.c:1945:13: warning: ‘kind’ may be used uninitialized [-Wmaybe-uninitialized] 1945 | else if (kind == PyUnicode_1BYTE_KIND) { | ^ Objects/longobject.c:1769:9: note: ‘kind’ was declared here 1769 | int kind; | ^~~~ /tmp/ccKPy7wn.s: Assembler messages: /tmp/ccKPy7wn.s: Fatal error: Modules/_decimal/_decimal.o: No space left on device make: *** [Makefile:3017: Modules/_decimal/_decimal.o] Error 1 make: *** Waiting for unfinished jobs.... /usr/bin/ld: final link failed: No space left on device collect2: error: ld returned 1 exit status make: *** [Makefile:1223: _bootstrap_python] Error 1 Test report =========== Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Fedora Rawhide LTO 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1114/builds/438 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-rawhide-x86_64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com>, Pablo Galindo Salgado <Pablogsal(a)gmail.com> BUILD FAILED: failed compile (failure) Summary of the results of the build (if available): =================================================== Captured traceback ================== remote: Enumerating objects: 32, done. remote: Counting objects: 3% (1/31) remote: Counting objects: 6% (2/31) remote: Counting objects: 9% (3/31) remote: Counting objects: 12% (4/31) remote: Counting objects: 16% (5/31) remote: Counting objects: 19% (6/31) remote: Counting objects: 22% (7/31) remote: Counting objects: 25% (8/31) remote: Counting objects: 29% (9/31) remote: Counting objects: 32% (10/31) remote: Counting objects: 35% (11/31) remote: Counting objects: 38% (12/31) remote: Counting objects: 41% (13/31) remote: Counting objects: 45% (14/31) remote: Counting objects: 48% (15/31) remote: Counting objects: 51% (16/31) remote: Counting objects: 54% (17/31) remote: Counting objects: 58% (18/31) remote: Counting objects: 61% (19/31) remote: Counting objects: 64% (20/31) remote: Counting objects: 67% (21/31) remote: Counting objects: 70% (22/31) remote: Counting objects: 74% (23/31) remote: Counting objects: 77% (24/31) remote: Counting objects: 80% (25/31) remote: Counting objects: 83% (26/31) remote: Counting objects: 87% (27/31) remote: Counting objects: 90% (28/31) remote: Counting objects: 93% (29/31) remote: Counting objects: 96% (30/31) remote: Counting objects: 100% (31/31) remote: Counting objects: 100% (31/31), done. remote: Compressing objects: 4% (1/24) remote: Compressing objects: 8% (2/24) remote: Compressing objects: 12% (3/24) remote: Compressing objects: 16% (4/24) remote: Compressing objects: 20% (5/24) remote: Compressing objects: 25% (6/24) remote: Compressing objects: 29% (7/24) remote: Compressing objects: 33% (8/24) remote: Compressing objects: 37% (9/24) remote: Compressing objects: 41% (10/24) remote: Compressing objects: 45% (11/24) remote: Compressing objects: 50% (12/24) remote: Compressing objects: 54% (13/24) remote: Compressing objects: 58% (14/24) remote: Compressing objects: 62% (15/24) remote: Compressing objects: 66% (16/24) remote: Compressing objects: 70% (17/24) remote: Compressing objects: 75% (18/24) remote: Compressing objects: 79% (19/24) remote: Compressing objects: 83% (20/24) remote: Compressing objects: 87% (21/24) remote: Compressing objects: 91% (22/24) remote: Compressing objects: 95% (23/24) remote: Compressing objects: 100% (24/24) remote: Compressing objects: 100% (24/24), done. remote: Total 32 (delta 10), reused 18 (delta 7), pack-reused 1 From https://github.com/python/cpython * branch 3.12 -> FETCH_HEAD Note: switching to '4f619e83fe1416c9b8d618533a0aaec0b4443b11'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 4f619e83fe [3.12] gh-109181: Speed up Traceback object creation by lazily compute the line number (GH-111548) (#111551) Switched to and reset branch '3.12' In function ‘_io_FileIO_close_impl’, inlined from ‘_io_FileIO_close’ at ./Modules/_io/clinic/fileio.c.h:33:12: ./Modules/_io/fileio.c:171:9: warning: ‘exc’ may be used uninitialized [-Wmaybe-uninitialized] 171 | _PyErr_ChainExceptions1(exc); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/_io/fileio.c: In function ‘_io_FileIO_close’: ./Modules/_io/fileio.c:156:15: note: ‘exc’ was declared here 156 | PyObject *exc; | ^~~ In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:356:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 356 | case 18: EXTRACT_DIGIT(s, x, 100000000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:356:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 356 | case 18: EXTRACT_DIGIT(s, x, 100000000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^ In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] In function ‘_mpd_to_string’: lto1: note: destination object is likely at address zero ar: unable to copy file 'libpython3.12.a'; reason: No space left on device make: *** [Makefile:967: libpython3.12.a] Error 1 Test report =========== Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Fedora Rawhide LTO + PGO 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1142/builds/459 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-rawhide-x86_64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com>, Pablo Galindo Salgado <Pablogsal(a)gmail.com> BUILD FAILED: failed compile (failure) Summary of the results of the build (if available): =================================================== Captured traceback ================== remote: Enumerating objects: 32, done. remote: Counting objects: 3% (1/31) remote: Counting objects: 6% (2/31) remote: Counting objects: 9% (3/31) remote: Counting objects: 12% (4/31) remote: Counting objects: 16% (5/31) remote: Counting objects: 19% (6/31) remote: Counting objects: 22% (7/31) remote: Counting objects: 25% (8/31) remote: Counting objects: 29% (9/31) remote: Counting objects: 32% (10/31) remote: Counting objects: 35% (11/31) remote: Counting objects: 38% (12/31) remote: Counting objects: 41% (13/31) remote: Counting objects: 45% (14/31) remote: Counting objects: 48% (15/31) remote: Counting objects: 51% (16/31) remote: Counting objects: 54% (17/31) remote: Counting objects: 58% (18/31) remote: Counting objects: 61% (19/31) remote: Counting objects: 64% (20/31) remote: Counting objects: 67% (21/31) remote: Counting objects: 70% (22/31) remote: Counting objects: 74% (23/31) remote: Counting objects: 77% (24/31) remote: Counting objects: 80% (25/31) remote: Counting objects: 83% (26/31) remote: Counting objects: 87% (27/31) remote: Counting objects: 90% (28/31) remote: Counting objects: 93% (29/31) remote: Counting objects: 96% (30/31) remote: Counting objects: 100% (31/31) remote: Counting objects: 100% (31/31), done. remote: Compressing objects: 4% (1/24) remote: Compressing objects: 8% (2/24) remote: Compressing objects: 12% (3/24) remote: Compressing objects: 16% (4/24) remote: Compressing objects: 20% (5/24) remote: Compressing objects: 25% (6/24) remote: Compressing objects: 29% (7/24) remote: Compressing objects: 33% (8/24) remote: Compressing objects: 37% (9/24) remote: Compressing objects: 41% (10/24) remote: Compressing objects: 45% (11/24) remote: Compressing objects: 50% (12/24) remote: Compressing objects: 54% (13/24) remote: Compressing objects: 58% (14/24) remote: Compressing objects: 62% (15/24) remote: Compressing objects: 66% (16/24) remote: Compressing objects: 70% (17/24) remote: Compressing objects: 75% (18/24) remote: Compressing objects: 79% (19/24) remote: Compressing objects: 83% (20/24) remote: Compressing objects: 87% (21/24) remote: Compressing objects: 91% (22/24) remote: Compressing objects: 95% (23/24) remote: Compressing objects: 100% (24/24) remote: Compressing objects: 100% (24/24), done. remote: Total 32 (delta 10), reused 18 (delta 7), pack-reused 1 From https://github.com/python/cpython * branch 3.12 -> FETCH_HEAD Note: switching to '4f619e83fe1416c9b8d618533a0aaec0b4443b11'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 4f619e83fe [3.12] gh-109181: Speed up Traceback object creation by lazily compute the line number (GH-111548) (#111551) Switched to and reset branch '3.12' find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [Makefile:2819: clean-retain-profile] Error 1 (ignored) In function ‘_io_FileIO_close_impl’, inlined from ‘_io_FileIO_close’ at ./Modules/_io/clinic/fileio.c.h:33:12: ./Modules/_io/fileio.c:171:9: warning: ‘exc’ may be used uninitialized [-Wmaybe-uninitialized] 171 | _PyErr_ChainExceptions1(exc); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/_io/fileio.c: In function ‘_io_FileIO_close’: ./Modules/_io/fileio.c:156:15: note: ‘exc’ was declared here 156 | PyObject *exc; | ^~~ ar: libpython3.12.a: error reading Modules/_io/_iomodule.o: No space left on device make[2]: *** [Makefile:967: libpython3.12.a] Error 1 make[1]: *** [Makefile:801: profile-gen-stamp] Error 2 make: *** [Makefile:813: profile-run-stamp] Error 2 Test report =========== Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Fedora Rawhide Clang Installed 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1098/builds/460 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-rawhide-x86_64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com>, Pablo Galindo Salgado <Pablogsal(a)gmail.com> BUILD FAILED: failed Installed (failure) Summary of the results of the build (if available): =================================================== Captured traceback ================== remote: Enumerating objects: 32, done. remote: Counting objects: 3% (1/31) remote: Counting objects: 6% (2/31) remote: Counting objects: 9% (3/31) remote: Counting objects: 12% (4/31) remote: Counting objects: 16% (5/31) remote: Counting objects: 19% (6/31) remote: Counting objects: 22% (7/31) remote: Counting objects: 25% (8/31) remote: Counting objects: 29% (9/31) remote: Counting objects: 32% (10/31) remote: Counting objects: 35% (11/31) remote: Counting objects: 38% (12/31) remote: Counting objects: 41% (13/31) remote: Counting objects: 45% (14/31) remote: Counting objects: 48% (15/31) remote: Counting objects: 51% (16/31) remote: Counting objects: 54% (17/31) remote: Counting objects: 58% (18/31) remote: Counting objects: 61% (19/31) remote: Counting objects: 64% (20/31) remote: Counting objects: 67% (21/31) remote: Counting objects: 70% (22/31) remote: Counting objects: 74% (23/31) remote: Counting objects: 77% (24/31) remote: Counting objects: 80% (25/31) remote: Counting objects: 83% (26/31) remote: Counting objects: 87% (27/31) remote: Counting objects: 90% (28/31) remote: Counting objects: 93% (29/31) remote: Counting objects: 96% (30/31) remote: Counting objects: 100% (31/31) remote: Counting objects: 100% (31/31), done. remote: Compressing objects: 4% (1/24) remote: Compressing objects: 8% (2/24) remote: Compressing objects: 12% (3/24) remote: Compressing objects: 16% (4/24) remote: Compressing objects: 20% (5/24) remote: Compressing objects: 25% (6/24) remote: Compressing objects: 29% (7/24) remote: Compressing objects: 33% (8/24) remote: Compressing objects: 37% (9/24) remote: Compressing objects: 41% (10/24) remote: Compressing objects: 45% (11/24) remote: Compressing objects: 50% (12/24) remote: Compressing objects: 54% (13/24) remote: Compressing objects: 58% (14/24) remote: Compressing objects: 62% (15/24) remote: Compressing objects: 66% (16/24) remote: Compressing objects: 70% (17/24) remote: Compressing objects: 75% (18/24) remote: Compressing objects: 79% (19/24) remote: Compressing objects: 83% (20/24) remote: Compressing objects: 87% (21/24) remote: Compressing objects: 91% (22/24) remote: Compressing objects: 95% (23/24) remote: Compressing objects: 100% (24/24) remote: Compressing objects: 100% (24/24), done. remote: Total 32 (delta 10), reused 18 (delta 7), pack-reused 1 From https://github.com/python/cpython * branch 3.12 -> FETCH_HEAD Note: switching to '4f619e83fe1416c9b8d618533a0aaec0b4443b11'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 4f619e83fe [3.12] gh-109181: Speed up Traceback object creation by lazily compute the line number (GH-111548) (#111551) Switched to and reset branch '3.12' ./Modules/expat/xmlparse.c:3116:9: warning: code will never be executed [-Wunreachable-code] 3116 | parser->m_characterDataHandler(parser->m_handlerArg, parser->m_dataBuf, | ^~~~~~ ./Modules/expat/xmlparse.c:3115:16: note: silence by adding parentheses to mark code as explicitly dead 3115 | else if (0 && parser->m_characterDataHandler) | ^ | /* DISABLES CODE */ ( ) ./Modules/expat/xmlparse.c:4059:9: warning: code will never be executed [-Wunreachable-code] 4059 | parser->m_characterDataHandler(parser->m_handlerArg, parser->m_dataBuf, | ^~~~~~ ./Modules/expat/xmlparse.c:4058:16: note: silence by adding parentheses to mark code as explicitly dead 4058 | else if (0 && parser->m_characterDataHandler) | ^ | /* DISABLES CODE */ ( ) 2 warnings generated. make: [Makefile:2409: libinstall] Error 1 (ignored) ERROR: Could not install packages due to an OSError: [Errno 28] No space left on device: '/home/buildbot/buildarea/3.12.cstratak-fedora-rawhide-x86_64.clang-installed/build/target/lib/python3.12/site-packages/pip' Traceback (most recent call last): File "<frozen runpy>", line 198, in _run_module_as_main File "<frozen runpy>", line 88, in _run_code File "/home/buildbot/buildarea/3.12.cstratak-fedora-rawhide-x86_64.clang-installed/build/Lib/ensurepip/__main__.py", line 5, in <module> sys.exit(ensurepip._main()) ^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-fedora-rawhide-x86_64.clang-installed/build/Lib/ensurepip/__init__.py", line 284, in _main return _bootstrap( ^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-fedora-rawhide-x86_64.clang-installed/build/Lib/ensurepip/__init__.py", line 200, in _bootstrap return _run_pip([*args, *_PACKAGE_NAMES], additional_paths) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-fedora-rawhide-x86_64.clang-installed/build/Lib/ensurepip/__init__.py", line 101, in _run_pip return subprocess.run(cmd, check=True).returncode ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-fedora-rawhide-x86_64.clang-installed/build/Lib/subprocess.py", line 571, in run raise CalledProcessError(retcode, process.args, subprocess.CalledProcessError: Command '['/home/buildbot/buildarea/3.12.cstratak-fedora-rawhide-x86_64.clang-installed/build/python', '-W', 'ignore::DeprecationWarning', '-c', '\nimport runpy\nimport sys\nsys.path = [\'/tmp/tmpqjjj5tc8/pip-23.2.1-py3-none-any.whl\'] + sys.path\nsys.argv[1:] = [\'install\', \'--no-cache-dir\', \'--no-index\', \'--find-links\', \'/tmp/tmpqjjj5tc8\', \'--root\', \'/\', \'--upgrade\', \'pip\']\nrunpy.run_module("pip", run_name="__main__", alter_sys=True)\n']' returned non-zero exit status 1. make: *** [Makefile:2056: install] Error 1 Test report =========== Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed compile (failure) (main)
by buildbot＠python.org 31 Oct '23

31 Oct '23

The Buildbot has detected a new failure on builder s390x Fedora Rawhide LTO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/323/builds/3314 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-rawhide-z Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com>, Dino Viehland <dinoviehland(a)fb.com>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, Mark Shannon <mark(a)hotpy.org>, Pablo Galindo Salgado <Pablogsal(a)gmail.com>, Prometheus3375 <35541026+Prometheus3375(a)users.noreply.github.com>, Quentin Peter <impact27(a)users.noreply.github.com>, Victor Stinner <vstinner(a)python.org>, xzmeng <aumo(a)foxmail.com> BUILD FAILED: failed compile (failure) Summary of the results of the build (if available): =================================================== Captured traceback ================== remote: Enumerating objects: 108, done. remote: Counting objects: 0% (1/105) remote: Counting objects: 1% (2/105) remote: Counting objects: 2% (3/105) remote: Counting objects: 3% (4/105) remote: Counting objects: 4% (5/105) remote: Counting objects: 5% (6/105) remote: Counting objects: 6% (7/105) remote: Counting objects: 7% (8/105) remote: Counting objects: 8% (9/105) remote: Counting objects: 9% (10/105) remote: Counting objects: 10% (11/105) remote: Counting objects: 11% (12/105) remote: Counting objects: 12% (13/105) remote: Counting objects: 13% (14/105) remote: Counting objects: 14% (15/105) remote: Counting objects: 15% (16/105) remote: Counting objects: 16% (17/105) remote: Counting objects: 17% (18/105) remote: Counting objects: 18% (19/105) remote: Counting objects: 19% (20/105) remote: Counting objects: 20% (21/105) remote: Counting objects: 21% (23/105) remote: Counting objects: 22% (24/105) remote: Counting objects: 23% (25/105) remote: Counting objects: 24% (26/105) remote: Counting objects: 25% (27/105) remote: Counting objects: 26% (28/105) remote: Counting objects: 27% (29/105) remote: Counting objects: 28% (30/105) remote: Counting objects: 29% (31/105) remote: Counting objects: 30% (32/105) remote: Counting objects: 31% (33/105) remote: Counting objects: 32% (34/105) remote: Counting objects: 33% (35/105) remote: Counting objects: 34% (36/105) remote: Counting objects: 35% (37/105) remote: Counting objects: 36% (38/105) remote: Counting objects: 37% (39/105) remote: Counting objects: 38% (40/105) remote: Counting objects: 39% (41/105) remote: Counting objects: 40% (42/105) remote: Counting objects: 41% (44/105) remote: Counting objects: 42% (45/105) remote: Counting objects: 43% (46/105) remote: Counting objects: 44% (47/105) remote: Counting objects: 45% (48/105) remote: Counting objects: 46% (49/105) remote: Counting objects: 47% (50/105) remote: Counting objects: 48% (51/105) remote: Counting objects: 49% (52/105) remote: Counting objects: 50% (53/105) remote: Counting objects: 51% (54/105) remote: Counting objects: 52% (55/105) remote: Counting objects: 53% (56/105) remote: Counting objects: 54% (57/105) remote: Counting objects: 55% (58/105) remote: Counting objects: 56% (59/105) remote: Counting objects: 57% (60/105) remote: Counting objects: 58% (61/105) remote: Counting objects: 59% (62/105) remote: Counting objects: 60% (63/105) remote: Counting objects: 61% (65/105) remote: Counting objects: 62% (66/105) remote: Counting objects: 63% (67/105) remote: Counting objects: 64% (68/105) remote: Counting objects: 65% (69/105) remote: Counting objects: 66% (70/105) remote: Counting objects: 67% (71/105) remote: Counting objects: 68% (72/105) remote: Counting objects: 69% (73/105) remote: Counting objects: 70% (74/105) remote: Counting objects: 71% (75/105) remote: Counting objects: 72% (76/105) remote: Counting objects: 73% (77/105) remote: Counting objects: 74% (78/105) remote: Counting objects: 75% (79/105) remote: Counting objects: 76% (80/105) remote: Counting objects: 77% (81/105) remote: Counting objects: 78% (82/105) remote: Counting objects: 79% (83/105) remote: Counting objects: 80% (84/105) remote: Counting objects: 81% (86/105) remote: Counting objects: 82% (87/105) remote: Counting objects: 83% (88/105) remote: Counting objects: 84% (89/105) remote: Counting objects: 85% (90/105) remote: Counting objects: 86% (91/105) remote: Counting objects: 87% (92/105) remote: Counting objects: 88% (93/105) remote: Counting objects: 89% (94/105) remote: Counting objects: 90% (95/105) remote: Counting objects: 91% (96/105) remote: Counting objects: 92% (97/105) remote: Counting objects: 93% (98/105) remote: Counting objects: 94% (99/105) remote: Counting objects: 95% (100/105) remote: Counting objects: 96% (101/105) remote: Counting objects: 97% (102/105) remote: Counting objects: 98% (103/105) remote: Counting objects: 99% (104/105) remote: Counting objects: 100% (105/105) remote: Counting objects: 100% (105/105), done. remote: Compressing objects: 1% (1/68) remote: Compressing objects: 2% (2/68) remote: Compressing objects: 4% (3/68) remote: Compressing objects: 5% (4/68) remote: Compressing objects: 7% (5/68) remote: Compressing objects: 8% (6/68) remote: Compressing objects: 10% (7/68) remote: Compressing objects: 11% (8/68) remote: Compressing objects: 13% (9/68) remote: Compressing objects: 14% (10/68) remote: Compressing objects: 16% (11/68) remote: Compressing objects: 17% (12/68) remote: Compressing objects: 19% (13/68) remote: Compressing objects: 20% (14/68) remote: Compressing objects: 22% (15/68) remote: Compressing objects: 23% (16/68) remote: Compressing objects: 25% (17/68) remote: Compressing objects: 26% (18/68) remote: Compressing objects: 27% (19/68) remote: Compressing objects: 29% (20/68) remote: Compressing objects: 30% (21/68) remote: Compressing objects: 32% (22/68) remote: Compressing objects: 33% (23/68) remote: Compressing objects: 35% (24/68) remote: Compressing objects: 36% (25/68) remote: Compressing objects: 38% (26/68) remote: Compressing objects: 39% (27/68) remote: Compressing objects: 41% (28/68) remote: Compressing objects: 42% (29/68) remote: Compressing objects: 44% (30/68) remote: Compressing objects: 45% (31/68) remote: Compressing objects: 47% (32/68) remote: Compressing objects: 48% (33/68) remote: Compressing objects: 50% (34/68) remote: Compressing objects: 51% (35/68) remote: Compressing objects: 52% (36/68) remote: Compressing objects: 54% (37/68) remote: Compressing objects: 55% (38/68) remote: Compressing objects: 57% (39/68) remote: Compressing objects: 58% (40/68) remote: Compressing objects: 60% (41/68) remote: Compressing objects: 61% (42/68) remote: Compressing objects: 63% (43/68) remote: Compressing objects: 64% (44/68) remote: Compressing objects: 66% (45/68) remote: Compressing objects: 67% (46/68) remote: Compressing objects: 69% (47/68) remote: Compressing objects: 70% (48/68) remote: Compressing objects: 72% (49/68) remote: Compressing objects: 73% (50/68) remote: Compressing objects: 75% (51/68) remote: Compressing objects: 76% (52/68) remote: Compressing objects: 77% (53/68) remote: Compressing objects: 79% (54/68) remote: Compressing objects: 80% (55/68) remote: Compressing objects: 82% (56/68) remote: Compressing objects: 83% (57/68) remote: Compressing objects: 85% (58/68) remote: Compressing objects: 86% (59/68) remote: Compressing objects: 88% (60/68) remote: Compressing objects: 89% (61/68) remote: Compressing objects: 91% (62/68) remote: Compressing objects: 92% (63/68) remote: Compressing objects: 94% (64/68) remote: Compressing objects: 95% (65/68) remote: Compressing objects: 97% (66/68) remote: Compressing objects: 98% (67/68) remote: Compressing objects: 100% (68/68) remote: Compressing objects: 100% (68/68), done. Receiving objects: 0% (1/108) Receiving objects: 1% (2/108) Receiving objects: 2% (3/108) Receiving objects: 3% (4/108) Receiving objects: 4% (5/108) Receiving objects: 5% (6/108) Receiving objects: 6% (7/108) Receiving objects: 7% (8/108) Receiving objects: 8% (9/108) Receiving objects: 9% (10/108) Receiving objects: 10% (11/108) Receiving objects: 11% (12/108) Receiving objects: 12% (13/108) Receiving objects: 13% (15/108) Receiving objects: 14% (16/108) Receiving objects: 15% (17/108) Receiving objects: 16% (18/108) Receiving objects: 17% (19/108) Receiving objects: 18% (20/108) Receiving objects: 19% (21/108) Receiving objects: 20% (22/108) Receiving objects: 21% (23/108) Receiving objects: 22% (24/108) Receiving objects: 23% (25/108) Receiving objects: 24% (26/108) Receiving objects: 25% (27/108) Receiving objects: 26% (29/108) Receiving objects: 27% (30/108) Receiving objects: 28% (31/108) Receiving objects: 29% (32/108) Receiving objects: 30% (33/108) Receiving objects: 31% (34/108) Receiving objects: 32% (35/108) Receiving objects: 33% (36/108) Receiving objects: 34% (37/108) Receiving objects: 35% (38/108) Receiving objects: 36% (39/108) Receiving objects: 37% (40/108) Receiving objects: 38% (42/108) Receiving objects: 39% (43/108) Receiving objects: 40% (44/108) Receiving objects: 41% (45/108) Receiving objects: 42% (46/108) Receiving objects: 43% (47/108) Receiving objects: 44% (48/108) Receiving objects: 45% (49/108) Receiving objects: 46% (50/108) Receiving objects: 47% (51/108) Receiving objects: 48% (52/108) Receiving objects: 49% (53/108) Receiving objects: 50% (54/108) Receiving objects: 51% (56/108) Receiving objects: 52% (57/108) Receiving objects: 53% (58/108) Receiving objects: 54% (59/108) Receiving objects: 55% (60/108) Receiving objects: 56% (61/108) Receiving objects: 57% (62/108) Receiving objects: 58% (63/108) Receiving objects: 59% (64/108) Receiving objects: 60% (65/108) Receiving objects: 61% (66/108) Receiving objects: 62% (67/108) Receiving objects: 63% (69/108) Receiving objects: 64% (70/108) Receiving objects: 65% (71/108) Receiving objects: 66% (72/108) Receiving objects: 67% (73/108) Receiving objects: 68% (74/108) Receiving objects: 69% (75/108) Receiving objects: 70% (76/108) Receiving objects: 71% (77/108) Receiving objects: 72% (78/108) Receiving objects: 73% (79/108) Receiving objects: 74% (80/108) Receiving objects: 75% (81/108) Receiving objects: 76% (83/108) Receiving objects: 77% (84/108) Receiving objects: 78% (85/108) Receiving objects: 79% (86/108) Receiving objects: 80% (87/108) Receiving objects: 81% (88/108) Receiving objects: 82% (89/108) Receiving objects: 83% (90/108) Receiving objects: 84% (91/108) Receiving objects: 85% (92/108) Receiving objects: 86% (93/108) Receiving objects: 87% (94/108) Receiving objects: 88% (96/108) Receiving objects: 89% (97/108) Receiving objects: 90% (98/108) Receiving objects: 91% (99/108) Receiving objects: 92% (100/108) Receiving objects: 93% (101/108) Receiving objects: 94% (102/108) Receiving objects: 95% (103/108) Receiving objects: 96% (104/108) remote: Total 108 (delta 54), reused 59 (delta 37), pack-reused 3 Receiving objects: 97% (105/108) Receiving objects: 98% (106/108) Receiving objects: 99% (107/108) Receiving objects: 100% (108/108) Receiving objects: 100% (108/108), 256.17 KiB | 9.49 MiB/s, done. Resolving deltas: 0% (0/54) Resolving deltas: 1% (1/54) Resolving deltas: 3% (2/54) Resolving deltas: 5% (3/54) Resolving deltas: 7% (4/54) Resolving deltas: 9% (5/54) Resolving deltas: 11% (6/54) Resolving deltas: 12% (7/54) Resolving deltas: 14% (8/54) Resolving deltas: 16% (9/54) Resolving deltas: 18% (10/54) Resolving deltas: 20% (11/54) Resolving deltas: 22% (12/54) Resolving deltas: 24% (13/54) Resolving deltas: 25% (14/54) Resolving deltas: 27% (15/54) Resolving deltas: 29% (16/54) Resolving deltas: 31% (17/54) Resolving deltas: 33% (18/54) Resolving deltas: 35% (19/54) Resolving deltas: 37% (20/54) Resolving deltas: 38% (21/54) Resolving deltas: 40% (22/54) Resolving deltas: 42% (23/54) Resolving deltas: 44% (24/54) Resolving deltas: 46% (25/54) Resolving deltas: 48% (26/54) Resolving deltas: 50% (27/54) Resolving deltas: 51% (28/54) Resolving deltas: 53% (29/54) Resolving deltas: 55% (30/54) Resolving deltas: 57% (31/54) Resolving deltas: 59% (32/54) Resolving deltas: 61% (33/54) Resolving deltas: 62% (34/54) Resolving deltas: 64% (35/54) Resolving deltas: 66% (36/54) Resolving deltas: 68% (37/54) Resolving deltas: 70% (38/54) Resolving deltas: 72% (39/54) Resolving deltas: 74% (40/54) Resolving deltas: 75% (41/54) Resolving deltas: 77% (42/54) Resolving deltas: 79% (43/54) Resolving deltas: 81% (44/54) Resolving deltas: 83% (45/54) Resolving deltas: 85% (46/54) Resolving deltas: 87% (47/54) Resolving deltas: 88% (48/54) Resolving deltas: 90% (49/54) Resolving deltas: 92% (50/54) Resolving deltas: 94% (51/54) Resolving deltas: 96% (52/54) Resolving deltas: 98% (53/54) Resolving deltas: 100% (54/54) Resolving deltas: 100% (54/54), completed with 12 local objects. From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'faa5f6053d7334a3ecc513c64947ac026439c03a'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at faa5f6053d gh-108765: Python.h no longer includes <stddef.h> on Windows (#111563) Switched to and reset branch 'main' In file included from Python/ceval.c:773: Python/generated_cases.c.h: In function ‘_PyEval_EvalFrameDefault’: Python/generated_cases.c.h:896:27: warning: unused variable ‘this_instr’ [-Wunused-variable] 896 | _Py_CODEUNIT *this_instr = frame->instr_ptr = next_instr; | ^~~~~~~~~~ Python/generated_cases.c.h:1436:27: warning: unused variable ‘this_instr’ [-Wunused-variable] 1436 | _Py_CODEUNIT *this_instr = frame->instr_ptr = next_instr; | ^~~~~~~~~~ Python/generated_cases.c.h:3827:27: warning: unused variable ‘this_instr’ [-Wunused-variable] 3827 | _Py_CODEUNIT *this_instr = frame->instr_ptr = next_instr; | ^~~~~~~~~~ In function ‘_io_FileIO_close_impl’, inlined from ‘_io_FileIO_close’ at ./Modules/_io/clinic/fileio.c.h:34:12: ./Modules/_io/fileio.c:175:9: warning: ‘exc’ may be used uninitialized [-Wmaybe-uninitialized] 175 | _PyErr_ChainExceptions1(exc); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/_io/fileio.c: In function ‘_io_FileIO_close’: ./Modules/_io/fileio.c:160:15: note: ‘exc’ was declared here 160 | PyObject *exc; | ^~~ In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero Assembler messages: Fatal error: can't create Modules/cjkcodecs/_codecs_jp.o: No space left on device make: *** [Makefile:3093: Modules/cjkcodecs/_codecs_jp.o] Error 1 make: *** Waiting for unfinished jobs.... Assembler messages: Fatal error: can't create Modules/cjkcodecs/_codecs_tw.o: No space left on device make: *** [Makefile:3097: Modules/cjkcodecs/_codecs_tw.o] Error 1 /tmp/ccFV4UYd.s: Assembler messages: /tmp/ccFV4UYd.s: Fatal error: can't write 3948 bytes to section .rodata of Modules/cjkcodecs/_codecs_kr.o: 'No space left on device' /tmp/ccFV4UYd.s: Fatal error: Modules/cjkcodecs/_codecs_kr.o: No such file or directory make: *** [Makefile:3095: Modules/cjkcodecs/_codecs_kr.o] Error 1 /tmp/cc2xgesK.s: Assembler messages: /tmp/cc2xgesK.s: Fatal error: can't write 3948 bytes to section .debug_info of Modules/expat/xmlparse.o: 'No space left on device' /tmp/cc2xgesK.s: Fatal error: Modules/expat/xmlparse.o: No such file or directory make: *** [Makefile:1136: Modules/expat/xmlparse.o] Error 1 /tmp/cc7dpFYO.s: Assembler messages: /tmp/cc7dpFYO.s: Fatal error: can't write 3 bytes to section .debug_loclists of Modules/expat/xmltok.o: 'No space left on device' /tmp/cc7dpFYO.s: Fatal error: Modules/expat/xmltok.o: No such file or directory make: *** [Makefile:1142: Modules/expat/xmltok.o] Error 1 /tmp/cckFMNBG.s: Assembler messages: /tmp/cckFMNBG.s: Fatal error: Modules/cjkcodecs/multibytecodec.o: No space left on device make: *** [Makefile:3099: Modules/cjkcodecs/multibytecodec.o] Error 1 find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make: [Makefile:2851: clean-retain-profile] Error 1 (ignored) Test report =========== Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora Rawhide Clang Installed 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/207/builds/4166 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-rawhide-z Build Reason: <unknown> Blamelist: Dino Viehland <dinoviehland(a)fb.com>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, Prometheus3375 <35541026+Prometheus3375(a)users.noreply.github.com>, Quentin Peter <impact27(a)users.noreply.github.com>, Victor Stinner <vstinner(a)python.org>, xzmeng <aumo(a)foxmail.com> BUILD FAILED: failed compile (failure) Uninstalled (failure) Summary of the results of the build (if available): =================================================== Captured traceback ================== remote: Enumerating objects: 51, done. remote: Counting objects: 2% (1/50) remote: Counting objects: 4% (2/50) remote: Counting objects: 6% (3/50) remote: Counting objects: 8% (4/50) remote: Counting objects: 10% (5/50) remote: Counting objects: 12% (6/50) remote: Counting objects: 14% (7/50) remote: Counting objects: 16% (8/50) remote: Counting objects: 18% (9/50) remote: Counting objects: 20% (10/50) remote: Counting objects: 22% (11/50) remote: Counting objects: 24% (12/50) remote: Counting objects: 26% (13/50) remote: Counting objects: 28% (14/50) remote: Counting objects: 30% (15/50) remote: Counting objects: 32% (16/50) remote: Counting objects: 34% (17/50) remote: Counting objects: 36% (18/50) remote: Counting objects: 38% (19/50) remote: Counting objects: 40% (20/50) remote: Counting objects: 42% (21/50) remote: Counting objects: 44% (22/50) remote: Counting objects: 46% (23/50) remote: Counting objects: 48% (24/50) remote: Counting objects: 50% (25/50) remote: Counting objects: 52% (26/50) remote: Counting objects: 54% (27/50) remote: Counting objects: 56% (28/50) remote: Counting objects: 58% (29/50) remote: Counting objects: 60% (30/50) remote: Counting objects: 62% (31/50) remote: Counting objects: 64% (32/50) remote: Counting objects: 66% (33/50) remote: Counting objects: 68% (34/50) remote: Counting objects: 70% (35/50) remote: Counting objects: 72% (36/50) remote: Counting objects: 74% (37/50) remote: Counting objects: 76% (38/50) remote: Counting objects: 78% (39/50) remote: Counting objects: 80% (40/50) remote: Counting objects: 82% (41/50) remote: Counting objects: 84% (42/50) remote: Counting objects: 86% (43/50) remote: Counting objects: 88% (44/50) remote: Counting objects: 90% (45/50) remote: Counting objects: 92% (46/50) remote: Counting objects: 94% (47/50) remote: Counting objects: 96% (48/50) remote: Counting objects: 98% (49/50) remote: Counting objects: 100% (50/50) remote: Counting objects: 100% (50/50), done. remote: Compressing objects: 4% (1/25) remote: Compressing objects: 8% (2/25) remote: Compressing objects: 12% (3/25) remote: Compressing objects: 16% (4/25) remote: Compressing objects: 20% (5/25) remote: Compressing objects: 24% (6/25) remote: Compressing objects: 28% (7/25) remote: Compressing objects: 32% (8/25) remote: Compressing objects: 36% (9/25) remote: Compressing objects: 40% (10/25) remote: Compressing objects: 44% (11/25) remote: Compressing objects: 48% (12/25) remote: Compressing objects: 52% (13/25) remote: Compressing objects: 56% (14/25) remote: Compressing objects: 60% (15/25) remote: Compressing objects: 64% (16/25) remote: Compressing objects: 68% (17/25) remote: Compressing objects: 72% (18/25) remote: Compressing objects: 76% (19/25) remote: Compressing objects: 80% (20/25) remote: Compressing objects: 84% (21/25) remote: Compressing objects: 88% (22/25) remote: Compressing objects: 92% (23/25) remote: Compressing objects: 96% (24/25) remote: Compressing objects: 100% (25/25) remote: Compressing objects: 100% (25/25), done. remote: Total 51 (delta 27), reused 39 (delta 25), pack-reused 1 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'faa5f6053d7334a3ecc513c64947ac026439c03a'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at faa5f6053d gh-108765: Python.h no longer includes <stddef.h> on Windows (#111563) Switched to and reset branch 'main' configure: WARNING: s390x-ibm-linux-gnu/clang is not supported configure: WARNING: Platform "s390x-ibm-linux-gnu" with compiler "clang" is not supported by the CPython core team, see https://peps.python.org/pep-0011/ for more information. In file included from Python/ceval.c:773: Python/generated_cases.c.h:896:27: warning: unused variable 'this_instr' [-Wunused-variable] 896 | _Py_CODEUNIT *this_instr = frame->instr_ptr = next_instr; | ^~~~~~~~~~ Python/generated_cases.c.h:1436:27: warning: unused variable 'this_instr' [-Wunused-variable] 1436 | _Py_CODEUNIT *this_instr = frame->instr_ptr = next_instr; | ^~~~~~~~~~ Python/generated_cases.c.h:3827:27: warning: unused variable 'this_instr' [-Wunused-variable] 3827 | _Py_CODEUNIT *this_instr = frame->instr_ptr = next_instr; | ^~~~~~~~~~ Python/ceval_gil.c:429:1: warning: unused function 'current_thread_holds_gil' [-Wunused-function] 429 | current_thread_holds_gil(struct _gil_runtime_state *gil, PyThreadState *tstate) | ^~~~~~~~~~~~~~~~~~~~~~~~ 1 warning generated. Python/optimizer.c:428:9: warning: variable 'reserved' set but not used [-Wunused-but-set-variable] 428 | int reserved = 0; | ^ 3 warnings generated. 1 warning generated. ./Modules/expat/xmlparse.c:3116:9: warning: code will never be executed [-Wunreachable-code] 3116 | parser->m_characterDataHandler(parser->m_handlerArg, parser->m_dataBuf, | ^~~~~~ ./Modules/expat/xmlparse.c:3115:16: note: silence by adding parentheses to mark code as explicitly dead 3115 | else if (0 && parser->m_characterDataHandler) | ^ | /* DISABLES CODE */ ( ) ./Modules/expat/xmlparse.c:4059:9: warning: code will never be executed [-Wunreachable-code] 4059 | parser->m_characterDataHandler(parser->m_handlerArg, parser->m_dataBuf, | ^~~~~~ ./Modules/expat/xmlparse.c:4058:16: note: silence by adding parentheses to mark code as explicitly dead 4058 | else if (0 && parser->m_characterDataHandler) | ^ | /* DISABLES CODE */ ( ) 2 warnings generated. /usr/bin/ld: final link failed: No space left on device clang: error: linker command failed with exit code 1 (use -v to see invocation) make: *** [Makefile:1252: _bootstrap_python] Error 1 make: *** Waiting for unfinished jobs.... chmod: cannot access 'target/': No such file or directory Test report =========== Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora Rawhide Clang 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/566/builds/4001 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-rawhide-z Build Reason: <unknown> Blamelist: Dino Viehland <dinoviehland(a)fb.com>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, Prometheus3375 <35541026+Prometheus3375(a)users.noreply.github.com>, Quentin Peter <impact27(a)users.noreply.github.com>, Victor Stinner <vstinner(a)python.org>, xzmeng <aumo(a)foxmail.com> BUILD FAILED: failed compile (failure) Summary of the results of the build (if available): =================================================== Captured traceback ================== remote: Enumerating objects: 51, done. remote: Counting objects: 2% (1/50) remote: Counting objects: 4% (2/50) remote: Counting objects: 6% (3/50) remote: Counting objects: 8% (4/50) remote: Counting objects: 10% (5/50) remote: Counting objects: 12% (6/50) remote: Counting objects: 14% (7/50) remote: Counting objects: 16% (8/50) remote: Counting objects: 18% (9/50) remote: Counting objects: 20% (10/50) remote: Counting objects: 22% (11/50) remote: Counting objects: 24% (12/50) remote: Counting objects: 26% (13/50) remote: Counting objects: 28% (14/50) remote: Counting objects: 30% (15/50) remote: Counting objects: 32% (16/50) remote: Counting objects: 34% (17/50) remote: Counting objects: 36% (18/50) remote: Counting objects: 38% (19/50) remote: Counting objects: 40% (20/50) remote: Counting objects: 42% (21/50) remote: Counting objects: 44% (22/50) remote: Counting objects: 46% (23/50) remote: Counting objects: 48% (24/50) remote: Counting objects: 50% (25/50) remote: Counting objects: 52% (26/50) remote: Counting objects: 54% (27/50) remote: Counting objects: 56% (28/50) remote: Counting objects: 58% (29/50) remote: Counting objects: 60% (30/50) remote: Counting objects: 62% (31/50) remote: Counting objects: 64% (32/50) remote: Counting objects: 66% (33/50) remote: Counting objects: 68% (34/50) remote: Counting objects: 70% (35/50) remote: Counting objects: 72% (36/50) remote: Counting objects: 74% (37/50) remote: Counting objects: 76% (38/50) remote: Counting objects: 78% (39/50) remote: Counting objects: 80% (40/50) remote: Counting objects: 82% (41/50) remote: Counting objects: 84% (42/50) remote: Counting objects: 86% (43/50) remote: Counting objects: 88% (44/50) remote: Counting objects: 90% (45/50) remote: Counting objects: 92% (46/50) remote: Counting objects: 94% (47/50) remote: Counting objects: 96% (48/50) remote: Counting objects: 98% (49/50) remote: Counting objects: 100% (50/50) remote: Counting objects: 100% (50/50), done. remote: Compressing objects: 4% (1/25) remote: Compressing objects: 8% (2/25) remote: Compressing objects: 12% (3/25) remote: Compressing objects: 16% (4/25) remote: Compressing objects: 20% (5/25) remote: Compressing objects: 24% (6/25) remote: Compressing objects: 28% (7/25) remote: Compressing objects: 32% (8/25) remote: Compressing objects: 36% (9/25) remote: Compressing objects: 40% (10/25) remote: Compressing objects: 44% (11/25) remote: Compressing objects: 48% (12/25) remote: Compressing objects: 52% (13/25) remote: Compressing objects: 56% (14/25) remote: Compressing objects: 60% (15/25) remote: Compressing objects: 64% (16/25) remote: Compressing objects: 68% (17/25) remote: Compressing objects: 72% (18/25) remote: Compressing objects: 76% (19/25) remote: Compressing objects: 80% (20/25) remote: Compressing objects: 84% (21/25) remote: Compressing objects: 88% (22/25) remote: Compressing objects: 92% (23/25) remote: Compressing objects: 96% (24/25) remote: Compressing objects: 100% (25/25) remote: Compressing objects: 100% (25/25), done. remote: Total 51 (delta 27), reused 38 (delta 25), pack-reused 1 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'faa5f6053d7334a3ecc513c64947ac026439c03a'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at faa5f6053d gh-108765: Python.h no longer includes <stddef.h> on Windows (#111563) Switched to and reset branch 'main' configure: WARNING: s390x-ibm-linux-gnu/clang is not supported configure: WARNING: Platform "s390x-ibm-linux-gnu" with compiler "clang" is not supported by the CPython core team, see https://peps.python.org/pep-0011/ for more information. /usr/bin/ld: final link failed: No space left on device clang: error: linker command failed with exit code 1 (use -v to see invocation) make: *** [Makefile:1252: _bootstrap_python] Error 1 make: *** Waiting for unfinished jobs.... Test report =========== Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora Rawhide 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/538/builds/4010 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-rawhide-z Build Reason: <unknown> Blamelist: Dino Viehland <dinoviehland(a)fb.com>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, Prometheus3375 <35541026+Prometheus3375(a)users.noreply.github.com>, Quentin Peter <impact27(a)users.noreply.github.com>, Victor Stinner <vstinner(a)python.org>, xzmeng <aumo(a)foxmail.com> BUILD FAILED: failed compile (failure) Summary of the results of the build (if available): =================================================== Captured traceback ================== remote: Enumerating objects: 51, done. remote: Counting objects: 2% (1/50) remote: Counting objects: 4% (2/50) remote: Counting objects: 6% (3/50) remote: Counting objects: 8% (4/50) remote: Counting objects: 10% (5/50) remote: Counting objects: 12% (6/50) remote: Counting objects: 14% (7/50) remote: Counting objects: 16% (8/50) remote: Counting objects: 18% (9/50) remote: Counting objects: 20% (10/50) remote: Counting objects: 22% (11/50) remote: Counting objects: 24% (12/50) remote: Counting objects: 26% (13/50) remote: Counting objects: 28% (14/50) remote: Counting objects: 30% (15/50) remote: Counting objects: 32% (16/50) remote: Counting objects: 34% (17/50) remote: Counting objects: 36% (18/50) remote: Counting objects: 38% (19/50) remote: Counting objects: 40% (20/50) remote: Counting objects: 42% (21/50) remote: Counting objects: 44% (22/50) remote: Counting objects: 46% (23/50) remote: Counting objects: 48% (24/50) remote: Counting objects: 50% (25/50) remote: Counting objects: 52% (26/50) remote: Counting objects: 54% (27/50) remote: Counting objects: 56% (28/50) remote: Counting objects: 58% (29/50) remote: Counting objects: 60% (30/50) remote: Counting objects: 62% (31/50) remote: Counting objects: 64% (32/50) remote: Counting objects: 66% (33/50) remote: Counting objects: 68% (34/50) remote: Counting objects: 70% (35/50) remote: Counting objects: 72% (36/50) remote: Counting objects: 74% (37/50) remote: Counting objects: 76% (38/50) remote: Counting objects: 78% (39/50) remote: Counting objects: 80% (40/50) remote: Counting objects: 82% (41/50) remote: Counting objects: 84% (42/50) remote: Counting objects: 86% (43/50) remote: Counting objects: 88% (44/50) remote: Counting objects: 90% (45/50) remote: Counting objects: 92% (46/50) remote: Counting objects: 94% (47/50) remote: Counting objects: 96% (48/50) remote: Counting objects: 98% (49/50) remote: Counting objects: 100% (50/50) remote: Counting objects: 100% (50/50), done. remote: Compressing objects: 4% (1/25) remote: Compressing objects: 8% (2/25) remote: Compressing objects: 12% (3/25) remote: Compressing objects: 16% (4/25) remote: Compressing objects: 20% (5/25) remote: Compressing objects: 24% (6/25) remote: Compressing objects: 28% (7/25) remote: Compressing objects: 32% (8/25) remote: Compressing objects: 36% (9/25) remote: Compressing objects: 40% (10/25) remote: Compressing objects: 44% (11/25) remote: Compressing objects: 48% (12/25) remote: Compressing objects: 52% (13/25) remote: Compressing objects: 56% (14/25) remote: Compressing objects: 60% (15/25) remote: Compressing objects: 64% (16/25) remote: Compressing objects: 68% (17/25) remote: Compressing objects: 72% (18/25) remote: Compressing objects: 76% (19/25) remote: Compressing objects: 80% (20/25) remote: Compressing objects: 84% (21/25) remote: Compressing objects: 88% (22/25) remote: Compressing objects: 92% (23/25) remote: Compressing objects: 96% (24/25) remote: Compressing objects: 100% (25/25) remote: Compressing objects: 100% (25/25), done. remote: Total 51 (delta 27), reused 38 (delta 25), pack-reused 1 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'faa5f6053d7334a3ecc513c64947ac026439c03a'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at faa5f6053d gh-108765: Python.h no longer includes <stddef.h> on Windows (#111563) Switched to and reset branch 'main' Objects/longobject.c: In function ‘long_format_binary’: Objects/longobject.c:2120:13: warning: ‘kind’ may be used uninitialized [-Wmaybe-uninitialized] 2120 | else if (kind == PyUnicode_1BYTE_KIND) { | ^ Objects/longobject.c:1996:9: note: ‘kind’ was declared here 1996 | int kind; | ^~~~ Objects/longobject.c: In function ‘long_to_decimal_string_internal’: Objects/longobject.c:1943:13: warning: ‘kind’ may be used uninitialized [-Wmaybe-uninitialized] 1943 | else if (kind == PyUnicode_1BYTE_KIND) { | ^ Objects/longobject.c:1767:9: note: ‘kind’ was declared here 1767 | int kind; | ^~~~ /usr/bin/ld: final link failed: No space left on device collect2: error: ld returned 1 exit status make: *** [Makefile:1252: _bootstrap_python] Error 1 Test report =========== Sincerely, -The Buildbot

1 0

Buildbot Python worker edelsohn-debian-z missing
by buildbot＠python.org 31 Oct '23

31 Oct '23

The Buildbot worker named edelsohn-debian-z went away. It last disconnected at Tue Oct 31 18:21:52 2023. The admin on record (as reported by WORKER:info/admin) was David Edelsohn <dje.gcc+bb(a)gmail.com> .

1 0

Buildbot Python worker linaro-win-arm64 missing
by buildbot＠python.org 31 Oct '23

31 Oct '23

The Buildbot worker named linaro-win-arm64 went away. It last disconnected at Tue Oct 31 16:47:28 2023. The admin on record (as reported by WORKER:info/admin) was Windows on Arm Linaro team <woa-support(a)op-lists.linaro.org> .

1 0

Buildbot Python worker linaro-win-arm64 missing
by buildbot＠python.org 31 Oct '23

31 Oct '23

The Buildbot worker named linaro-win-arm64 went away. It last disconnected at Tue Oct 31 13:48:39 2023. The admin on record (as reported by WORKER:info/admin) was Windows on Arm Linaro team <woa-support(a)op-lists.linaro.org> .

1 0

☠ Buildbot (Python): python/cpython - failed compile (failure) (main)
by buildbot＠python.org 31 Oct '23

31 Oct '23

The Buildbot has detected a new failure on builder s390x Fedora Rawhide LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/341/builds/4092 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-rawhide-z Build Reason: <unknown> Blamelist: Mark Shannon <mark(a)hotpy.org> BUILD FAILED: failed compile (failure) Summary of the results of the build (if available): =================================================== Captured traceback ================== remote: Enumerating objects: 15, done. remote: Counting objects: 6% (1/15) remote: Counting objects: 13% (2/15) remote: Counting objects: 20% (3/15) remote: Counting objects: 26% (4/15) remote: Counting objects: 33% (5/15) remote: Counting objects: 40% (6/15) remote: Counting objects: 46% (7/15) remote: Counting objects: 53% (8/15) remote: Counting objects: 60% (9/15) remote: Counting objects: 66% (10/15) remote: Counting objects: 73% (11/15) remote: Counting objects: 80% (12/15) remote: Counting objects: 86% (13/15) remote: Counting objects: 93% (14/15) remote: Counting objects: 100% (15/15) remote: Counting objects: 100% (15/15), done. remote: Compressing objects: 12% (1/8) remote: Compressing objects: 25% (2/8) remote: Compressing objects: 37% (3/8) remote: Compressing objects: 50% (4/8) remote: Compressing objects: 62% (5/8) remote: Compressing objects: 75% (6/8) remote: Compressing objects: 87% (7/8) remote: Compressing objects: 100% (8/8) remote: Compressing objects: 100% (8/8), done. remote: Total 15 (delta 7), reused 8 (delta 7), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to '2904d99839cd4620818fd0556a1c0b0229944abc'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 2904d99839 GH-111485: Remove some special cases from the code generator and bytecodes.c (GH-111540) Switched to and reset branch 'main' find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [Makefile:2851: clean-retain-profile] Error 1 (ignored) In file included from Python/ceval.c:773: Python/generated_cases.c.h: In function ‘_PyEval_EvalFrameDefault’: Python/generated_cases.c.h:896:27: warning: unused variable ‘this_instr’ [-Wunused-variable] 896 | _Py_CODEUNIT *this_instr = frame->instr_ptr = next_instr; | ^~~~~~~~~~ Python/generated_cases.c.h:1436:27: warning: unused variable ‘this_instr’ [-Wunused-variable] 1436 | _Py_CODEUNIT *this_instr = frame->instr_ptr = next_instr; | ^~~~~~~~~~ Python/generated_cases.c.h:3827:27: warning: unused variable ‘this_instr’ [-Wunused-variable] 3827 | _Py_CODEUNIT *this_instr = frame->instr_ptr = next_instr; | ^~~~~~~~~~ In function ‘_io_FileIO_close_impl’, inlined from ‘_io_FileIO_close’ at ./Modules/_io/clinic/fileio.c.h:34:12: ./Modules/_io/fileio.c:175:9: warning: ‘exc’ may be used uninitialized [-Wmaybe-uninitialized] 175 | _PyErr_ChainExceptions1(exc); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/_io/fileio.c: In function ‘_io_FileIO_close’: ./Modules/_io/fileio.c:160:15: note: ‘exc’ was declared here 160 | PyObject *exc; | ^~~ ar: unable to copy file 'libpython3.13.a'; reason: No space left on device make[2]: *** [Makefile:992: libpython3.13.a] Error 1 make[1]: *** [Makefile:822: profile-gen-stamp] Error 2 make: *** [Makefile:834: profile-run-stamp] Error 2 Test report =========== Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) (main)
by buildbot＠python.org 31 Oct '23

31 Oct '23

The Buildbot has detected a new failure on builder AMD64 Ubuntu NoGIL Refleaks 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1226/builds/405 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: itamaro-ubuntu-aws Build Reason: <unknown> Blamelist: Adam Turner <9087854+AA-Turner(a)users.noreply.github.com>, Anthony Shaw <anthony.p.shaw(a)gmail.com>, Artyom Romanov <92092049+art3xa(a)users.noreply.github.com>, Ayappan Perumal <ayappap2(a)in.ibm.com>, Barney Gale <barney.gale(a)gmail.com>, Batuhan Taskaya <isidentical(a)gmail.com>, Brandt Bucher <brandtbucher(a)microsoft.com>, Dima Tisnek <dimaqq(a)gmail.com>, Dino Viehland <dinoviehland(a)fb.com>, Don Patterson <37046246+don-patterson(a)users.noreply.github.com>, Donghee Na <donghee.na(a)python.org>, Eric Snow <ericsnowcurrently(a)gmail.com>, Erlend E. Aasland <erlend(a)python.org>, Evan Kohilas <ekohilas(a)users.noreply.github.com>, Furkan Onder <furkanonder(a)protonmail.com>, Gouvernathor <44340603+Gouvernathor(a)users.noreply.github.com>, Guido van Rossum <guido(a)python.org>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, InSync <122007197+InSyncWithFoo(a)users.noreply.github.com>, Irit Katriel <1055913+iritkatriel(a)users.noreply.github.com>, James Tocknell <aragilar+github(a)gmail.com>, Jochen S prickerhof <github(a)jochen.sprickerhof.de>, Jokimax <77680901+Jokimax(a)users.noreply.github.com>, Jonathan Berthias <jvberthias(a)gmail.com>, Karolina Surma <33810531+befeleme(a)users.noreply.github.com>, Ken Jin <kenjin(a)python.org>, Khalil Mouawad <99619908+khlmood(a)users.noreply.github.com>, Kirill Podoprigora <kirill.bast9(a)mail.ru>, Maciej Olko <maciej.olko(a)affirm.com>, Mark Shannon <mark(a)hotpy.org>, Michael Droettboom <mdboom(a)gmail.com>, NCLI <45665319+NCLI(a)users.noreply.github.com>, Ned Batchelder <ned(a)nedbatchelder.com>, Nick <Nikki1993(a)users.noreply.github.com>, Nikita Sobolev <mail(a)sobolevn.me>, Pablo Galindo Salgado <Pablogsal(a)gmail.com>, Pablo Martí Gamboa <pablo(a)cointracker.com>, Pavel Karateev <lancelote.du.lac(a)gmail.com>, Radislav Chugunov <52372310+chgnrdv(a)users.noreply.github.com>, Raymond Hettinger <rhettinger(a)users.noreply.github.com>, Riccardo Ghetta <rghe(a)users.noreply.github.com>, Sam Gross <colesbury(a)gmail.com>, Satish Pokala <49762924+Satishpokala124(a)users.noreply.gi thub.com>, Savannah Ostrowski <savannahostrowski(a)gmail.com>, Savannah Ostrowski <sostrowski(a)microsoft.com>, Sergey B Kirpichev <skirpichev(a)gmail.com>, Serhiy Storchaka <storchaka(a)gmail.com>, Tamás Hegedűs <sorgloomer(a)users.noreply.github.com>, Terry Jan Reedy <tjreedy(a)udel.edu>, Tian Gao <gaogaotiantian(a)hotmail.com>, Unique-Usman <86585626+Unique-Usman(a)users.noreply.github.com>, Victor Stinner <vstinner(a)python.org>, YAMAMOTO Takashi <yamamoto(a)midokura.com>, Zachary Ware <zach(a)python.org>, Zack Cerza <zack(a)cerza.org>, c-bata <c-bata(a)users.noreply.github.com>, gsallam <123525874+gsallam(a)users.noreply.github.com>, hetmankp <728670+hetmankp(a)users.noreply.github.com>, sc07kvm <sc07kvmxoma(a)mail.ru>, scoder <stefan_ml(a)behnel.de>, zcxsythenew <30565051+zcxsythenew(a)users.noreply.github.com>, Łukasz Langa <lukasz(a)langa.pl> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 34 is closed Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 34 is closed .Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 105 is closed Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 105 is closed .Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 176 is closed Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 176 is closed .Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 247 is closed Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 247 is closed .Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 318 is closed Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 318 is closed .Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 389 is closed Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 389 is closed . Traceback (most recent call last): File "<string>", line 1, in <module> SystemExit: 42 Traceback (most recent call last): File "<string>", line 1, in <module> Exception: spam File "<string>", line 1 print("spam" ^ SyntaxError: '(' was never closed Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit: 42 .Traceback (most recent call last): File "<string>", line 1, in <module> SystemExit: 42 Traceback (most recent call last): File "<string>", line 1, in <module> Exception: spam File "<string>", line 1 print("spam" ^ SyntaxError: '(' was never closed Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit: 42 .Traceback (most recent call last): File "<string>", line 1, in <module> SystemExit: 42 Traceback (most recent call last): File "<string>", line 1, in <module> Exception: spam File "<string>", line 1 print("spam" ^ SyntaxError: '(' was never closed Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit: 42 .Traceback (most recent call last): File "<string>", line 1, in <module> SystemExit: 42 Traceback (most recent call last): File "<string>", line 1, in <module> Exception: spam File "<string>", line 1 print("spam" ^ SyntaxError: '(' was never closed Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit: 42 .Traceback (most recent call last): File "<string>", line 1, in <module> SystemExit: 42 Traceback (most recent call last): File "<string>", line 1, in <module> Exception: spam File "<string>", line 1 print("spam" ^ SyntaxError: '(' was never closed Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit: 42 .Traceback (most recent call last): File "<string>", line 1, in <module> SystemExit: 42 Traceback (most recent call last): File "<string>", line 1, in <module> Exception: spam File "<string>", line 1 print("spam" ^ SyntaxError: '(' was never closed Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit: 42 . Traceback (most recent call last): File "<string>", line 13, in <module> File "<frozen importlib._bootstrap>", line 813, in module_from_spec File "<frozen importlib._bootstrap_external>", line 1302, in create_module File "<frozen importlib._bootstrap>", line 488, in _call_with_frames_removed ImportError: module _test_shared_gil_only does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 13, in <module> File "<frozen importlib._bootstrap>", line 813, in module_from_spec File "<frozen importlib._bootstrap_external>", line 1302, in create_module File "<frozen importlib._bootstrap>", line 488, in _call_with_frames_removed ImportError: module _test_shared_gil_only does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 13, in <module> File "<frozen importlib._bootstrap>", line 813, in module_from_spec File "<frozen importlib._bootstrap_external>", line 1302, in create_module File "<frozen importlib._bootstrap>", line 488, in _call_with_frames_removed ImportError: module _test_shared_gil_only does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 13, in <module> File "<frozen importlib._bootstrap>", line 813, in module_from_spec File "<frozen importlib._bootstrap_external>", line 1302, in create_module File "<frozen importlib._bootstrap>", line 488, in _call_with_frames_removed ImportError: module _test_shared_gil_only does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 13, in <module> File "<frozen importlib._bootstrap>", line 813, in module_from_spec File "<frozen importlib._bootstrap_external>", line 1302, in create_module File "<frozen importlib._bootstrap>", line 488, in _call_with_frames_removed ImportError: module _test_shared_gil_only does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 13, in <module> File "<frozen importlib._bootstrap>", line 813, in module_from_spec File "<frozen importlib._bootstrap_external>", line 1302, in create_module File "<frozen importlib._bootstrap>", line 488, in _call_with_frames_removed ImportError: module _test_shared_gil_only does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters . Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=1844162) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/resource_tracker.py:254: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown: {'/mp-n8t0d6n2', '/mp-kuu_s9f9', '/mp-1vhhbjxn', '/mp-o_9enjap', '/mp-am9wd40x', '/mp-8q54_0ax'} warnings.warn( Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=1844162) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/resource_tracker.py:254: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown: {'/mp-wpk9epzz', '/mp-wrw5yv9m', '/mp-57hi370j', '/mp-9569yejv', '/mp-ft1su9dj', '/mp-kqdcgn9x'} warnings.warn( Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=1844162) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/resource_tracker.py:254: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown: {'/mp-bku3yd8f', '/mp-rpm2anq_', '/mp-qgpkthyf', '/mp-ymx3t008', '/mp-6_hxfwk8', '/mp-u88u2u0j'} warnings.warn( Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=1844162) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/resource_tracker.py:254: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown: {'/mp-0jdveat6', '/mp-vv_1k2vq', '/mp-l90w01vr', '/mp-km625fgj', '/mp-x477rt__', '/mp-7rosj7gm'} warnings.warn( Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=1844162) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/resource_tracker.py:254: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown: {'/mp-hj28_c1l', '/mp-zxrzxki5', '/mp-yld_a5eu', '/mp-6_t1pooe', '/mp-mzn4fopl', '/mp-mz_vcx6u'} warnings.warn( Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory . Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters . Test report =========== Failed tests: - test.test_multiprocessing_fork.test_threads Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): - failed test (failure) (dde5a99ba2173cf1ffbc1692d68000610250eacd)
by buildbot＠python.org 31 Oct '23

31 Oct '23

The Buildbot has detected a new failure on builder PPC64LE RHEL7 Refleaks 3.12 while building Python. Full details are available at: https://buildbot.python.org/all/#/builders/1147/builds/159 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL7-ppc64le Build Reason: <unknown> Blamelist: BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=22270) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/resource_tracker.py:254: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=22270) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/resource_tracker.py:254: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=22270) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/resource_tracker.py:254: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=22270) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/resource_tracker.py:254: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=22270) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/resource_tracker.py:254: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL7-ppc64le.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory . Test report =========== Failed tests: - test_typing Test leaking resources: - test_typing: memory blocks Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): - failed test (failure) (9495bcaf599e0961b45447b8fab7f8446945ba1a)
by buildbot＠python.org 31 Oct '23

31 Oct '23

The Buildbot has detected a new failure on builder s390x Fedora Refleaks 3.x while building Python. Full details are available at: https://buildbot.python.org/all/#/builders/433/builds/928 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-z Build Reason: <unknown> Blamelist: BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 34 is closed Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 34 is closed .Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 105 is closed Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 105 is closed .Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 176 is closed Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 176 is closed .Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 247 is closed Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 247 is closed .Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 318 is closed Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 318 is closed .Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 389 is closed Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 389 is closed . Traceback (most recent call last): File "<string>", line 1, in <module> SystemExit: 42 Traceback (most recent call last): File "<string>", line 1, in <module> Exception: spam File "<string>", line 1 print("spam" ^ SyntaxError: '(' was never closed Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit: 42 .Traceback (most recent call last): File "<string>", line 1, in <module> SystemExit: 42 Traceback (most recent call last): File "<string>", line 1, in <module> Exception: spam File "<string>", line 1 print("spam" ^ SyntaxError: '(' was never closed Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit: 42 .Traceback (most recent call last): File "<string>", line 1, in <module> SystemExit: 42 Traceback (most recent call last): File "<string>", line 1, in <module> Exception: spam File "<string>", line 1 print("spam" ^ SyntaxError: '(' was never closed Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit: 42 .Traceback (most recent call last): File "<string>", line 1, in <module> SystemExit: 42 Traceback (most recent call last): File "<string>", line 1, in <module> Exception: spam File "<string>", line 1 print("spam" ^ SyntaxError: '(' was never closed Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit: 42 .Traceback (most recent call last): File "<string>", line 1, in <module> SystemExit: 42 Traceback (most recent call last): File "<string>", line 1, in <module> Exception: spam File "<string>", line 1 print("spam" ^ SyntaxError: '(' was never closed Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit: 42 .Traceback (most recent call last): File "<string>", line 1, in <module> SystemExit: 42 Traceback (most recent call last): File "<string>", line 1, in <module> Exception: spam File "<string>", line 1 print("spam" ^ SyntaxError: '(' was never closed Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit: 42 . Traceback (most recent call last): File "<string>", line 13, in <module> File "<frozen importlib._bootstrap>", line 813, in module_from_spec File "<frozen importlib._bootstrap_external>", line 1302, in create_module File "<frozen importlib._bootstrap>", line 488, in _call_with_frames_removed ImportError: module _test_shared_gil_only does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 13, in <module> File "<frozen importlib._bootstrap>", line 813, in module_from_spec File "<frozen importlib._bootstrap_external>", line 1302, in create_module File "<frozen importlib._bootstrap>", line 488, in _call_with_frames_removed ImportError: module _test_shared_gil_only does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 13, in <module> File "<frozen importlib._bootstrap>", line 813, in module_from_spec File "<frozen importlib._bootstrap_external>", line 1302, in create_module File "<frozen importlib._bootstrap>", line 488, in _call_with_frames_removed ImportError: module _test_shared_gil_only does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 13, in <module> File "<frozen importlib._bootstrap>", line 813, in module_from_spec File "<frozen importlib._bootstrap_external>", line 1302, in create_module File "<frozen importlib._bootstrap>", line 488, in _call_with_frames_removed ImportError: module _test_shared_gil_only does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 13, in <module> File "<frozen importlib._bootstrap>", line 813, in module_from_spec File "<frozen importlib._bootstrap_external>", line 1302, in create_module File "<frozen importlib._bootstrap>", line 488, in _call_with_frames_removed ImportError: module _test_shared_gil_only does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 13, in <module> File "<frozen importlib._bootstrap>", line 813, in module_from_spec File "<frozen importlib._bootstrap_external>", line 1302, in create_module File "<frozen importlib._bootstrap>", line 488, in _call_with_frames_removed ImportError: module _test_shared_gil_only does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters . Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=1702358) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/resource_tracker.py:254: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown: {'/mp-ke8jps4o', '/mp-jyxgx7pt', '/mp-lmj7mrvw', '/mp-pwi3omn5', '/mp-rj5vhgj9', '/mp-wveua9fp'} warnings.warn( Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=1702358) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/resource_tracker.py:254: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown: {'/mp-s3m5oks8', '/mp-g4rnc04d', '/mp-vrsw537x', '/mp-6ltydkqb', '/mp-ux303fv5', '/mp-doyaty1i'} warnings.warn( Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=1702358) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/resource_tracker.py:254: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown: {'/mp-jylxss9l', '/mp-xlexysqv', '/mp-u_6lwyej', '/mp-1tr3924t', '/mp-dijymdd_', '/mp-dxp2ikzb'} warnings.warn( Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=1702358) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/resource_tracker.py:254: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown: {'/mp-oohxyhsw', '/mp-9op_8u11', '/mp-37aptw2j', '/mp-lob5julf', '/mp-27ucps8l', '/mp-vy8kn0et'} warnings.warn( Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=1702358) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/resource_tracker.py:254: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown: {'/mp-o0wdyo22', '/mp-hogkdogu', '/mp-sjrnpqra', '/mp-73dpilwv', '/mp-jb68azd_', '/mp-8b331t60'} warnings.warn( Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory . Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters . Test report =========== Failed tests: - test.test_multiprocessing_forkserver.test_threads Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder aarch64 Fedora Rawhide Refleaks 3.x while building Python. Full details are available at: https://buildbot.python.org/all/#/builders/290/builds/899 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-rawhide-aarch64 Build Reason: <unknown> Blamelist: BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 34 is closed Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 34 is closed .Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 105 is closed Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 105 is closed .Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 176 is closed Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 176 is closed .Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 247 is closed Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 247 is closed .Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 318 is closed Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 318 is closed .Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 389 is closed Traceback (most recent call last): File "<string>", line 2, in <module> _xxinterpchannels.ChannelClosedError: channel 389 is closed . Traceback (most recent call last): File "<string>", line 1, in <module> SystemExit: 42 Traceback (most recent call last): File "<string>", line 1, in <module> Exception: spam File "<string>", line 1 print("spam" ^ SyntaxError: '(' was never closed Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit: 42 .Traceback (most recent call last): File "<string>", line 1, in <module> SystemExit: 42 Traceback (most recent call last): File "<string>", line 1, in <module> Exception: spam File "<string>", line 1 print("spam" ^ SyntaxError: '(' was never closed Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit: 42 .Traceback (most recent call last): File "<string>", line 1, in <module> SystemExit: 42 Traceback (most recent call last): File "<string>", line 1, in <module> Exception: spam File "<string>", line 1 print("spam" ^ SyntaxError: '(' was never closed Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit: 42 .Traceback (most recent call last): File "<string>", line 1, in <module> SystemExit: 42 Traceback (most recent call last): File "<string>", line 1, in <module> Exception: spam File "<string>", line 1 print("spam" ^ SyntaxError: '(' was never closed Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit: 42 .Traceback (most recent call last): File "<string>", line 1, in <module> SystemExit: 42 Traceback (most recent call last): File "<string>", line 1, in <module> Exception: spam File "<string>", line 1 print("spam" ^ SyntaxError: '(' was never closed Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit: 42 .Traceback (most recent call last): File "<string>", line 1, in <module> SystemExit: 42 Traceback (most recent call last): File "<string>", line 1, in <module> Exception: spam File "<string>", line 1 print("spam" ^ SyntaxError: '(' was never closed Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit Traceback (most recent call last): File "<string>", line 3, in <module> SystemExit: 42 . Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=259629) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/resource_tracker.py:254: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown: {'/mp-kbr7mhw1', '/mp-6atdszv7', '/mp-eki5a7yd', '/mp-l4op0n7o', '/mp-87rtbn_j', '/mp-y3iwwozx'} warnings.warn( Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=259629) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/resource_tracker.py:254: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown: {'/mp-3q6rnfsg', '/mp-igniupcl', '/mp-aw4crkry', '/mp-rk6sawgt', '/mp-hilfb5pf', '/mp-l4v6qzqg'} warnings.warn( Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=259629) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/resource_tracker.py:254: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown: {'/mp-2o5549kr', '/mp-f6d_rav1', '/mp-0aaqi20h', '/mp-xp15x3ja', '/mp-kz1mzgbq', '/mp-0is059e0'} warnings.warn( Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=259629) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/resource_tracker.py:254: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown: {'/mp-o8z9bbg3', '/mp-35zle069', '/mp-by3r_z4x', '/mp-m_64hwtm', '/mp-c6smsf1e', '/mp-o1_rrh0s'} warnings.warn( Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=259629) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/resource_tracker.py:254: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown: {'/mp-uzp5r9fl', '/mp-97h1ljl2', '/mp-n7s40_5n', '/mp-gn2hxk7h', '/mp-s9015vxk', '/mp-3edepwn7'} warnings.warn( Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 296, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/util.py", line 220, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory . Traceback (most recent call last): File "<string>", line 13, in <module> File "<frozen importlib._bootstrap>", line 813, in module_from_spec File "<frozen importlib._bootstrap_external>", line 1302, in create_module File "<frozen importlib._bootstrap>", line 488, in _call_with_frames_removed ImportError: module _test_shared_gil_only does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 13, in <module> File "<frozen importlib._bootstrap>", line 813, in module_from_spec File "<frozen importlib._bootstrap_external>", line 1302, in create_module File "<frozen importlib._bootstrap>", line 488, in _call_with_frames_removed ImportError: module _test_shared_gil_only does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 13, in <module> File "<frozen importlib._bootstrap>", line 813, in module_from_spec File "<frozen importlib._bootstrap_external>", line 1302, in create_module File "<frozen importlib._bootstrap>", line 488, in _call_with_frames_removed ImportError: module _test_shared_gil_only does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 13, in <module> File "<frozen importlib._bootstrap>", line 813, in module_from_spec File "<frozen importlib._bootstrap_external>", line 1302, in create_module File "<frozen importlib._bootstrap>", line 488, in _call_with_frames_removed ImportError: module _test_shared_gil_only does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 13, in <module> File "<frozen importlib._bootstrap>", line 813, in module_from_spec File "<frozen importlib._bootstrap_external>", line 1302, in create_module File "<frozen importlib._bootstrap>", line 488, in _call_with_frames_removed ImportError: module _test_shared_gil_only does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 13, in <module> File "<frozen importlib._bootstrap>", line 813, in module_from_spec File "<frozen importlib._bootstrap_external>", line 1302, in create_module File "<frozen importlib._bootstrap>", line 488, in _call_with_frames_removed ImportError: module _test_shared_gil_only does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 4, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters . Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters .Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters Traceback (most recent call last): File "<string>", line 2, in <module> ImportError: module _testsinglephase does not support loading in subinterpreters . Test report =========== Failed tests: - test.test_multiprocessing_forkserver.test_threads Sincerely, -The Buildbot

1 0