Mailman 3 May 2023 - Buildbot-status

☠ Buildbot (Python): python/cpython - failed test (failure) uploading test-results.xml (failure) (main)
by buildbot＠python.org 15 May '23

15 May '23

The Buildbot has detected a new failure on builder s390x Fedora LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/545/builds/3792 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-z Build Reason: <unknown> Blamelist: Adam Turner <9087854+AA-Turner(a)users.noreply.github.com>, Alex Henrie <alexhenrie24(a)gmail.com>, Alex Waygood <Alex.Waygood(a)Gmail.com>, Alexey Namyotkin <62434915+nametkin(a)users.noreply.github.com>, Arjun <ccldarjun(a)icloud.com>, Arthur Pastel <arthur.pastel(a)gmail.com>, Barney Gale <barney.gale(a)gmail.com>, Ben Kallus <49924171+kenballus(a)users.noreply.github.com>, Brandt Bucher <brandtbucher(a)microsoft.com>, Burak Saler <59198732+buraksaler(a)users.noreply.github.com>, Carey Metcalfe <carey(a)cmetcalfe.ca>, Carl Meyer <carl(a)oddbird.net>, Charles Machalow <csm10495(a)gmail.com>, Christopher Chavez <chrischavez(a)gmx.us>, David Foster <david(a)dafoster.net>, Dong-hee Na <donghee.na(a)python.org>, Eric Snow <ericsnowcurrently(a)gmail.com>, Erlend E. Aasland <erlend.aasland(a)protonmail.com>, Gleb Smirnoff <glebius(a)FreeBSD.org>, Gregory P. Smith <greg(a)krypto.org>, Gregory Szorc <gregory.szorc(a)gmail.com>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, Irit Katriel <1055913+iritkatriel@users. noreply.github.com>, Itamar Ostricher <itamarost(a)gmail.com>, Jacob Bower <1978924+jbower-fb(a)users.noreply.github.com>, Jakub Kulík <Kulikjak(a)gmail.com>, James Gerity <snoopjedi(a)gmail.com>, Jelle Zijlstra <jelle.zijlstra(a)gmail.com>, Jeong, YunWon <69878+youknowone(a)users.noreply.github.com>, John Belmonte <john(a)neggie.net>, JohnJamesUtley <81572567+JohnJamesUtley(a)users.noreply.github.com>, Jonathan Protzenko <protz(a)microsoft.com>, Jurica Bradarić <jbradaric(a)users.noreply.github.com>, Kevin Krakauer <kevinGC(a)users.noreply.github.com>, Kirill Podoprigora <kirill.bast9(a)mail.ru>, Kumar Aditya <59607654+kumaraditya303(a)users.noreply.github.com>, Lysandros Nikolaou <lisandrosnik(a)gmail.com>, Mark Shannon <mark(a)hotpy.org>, Michael Blahay <mblahay(a)users.noreply.github.com>, Nathaniel J. Smith <njs(a)pobox.com>, Ned Batchelder <ned(a)nedbatchelder.com>, Nikita Sobolev <mail(a)sobolevn.me>, Oleg Iarygin <oleg(a)arhadthedev.net>, Pablo Galindo Salgado <Pablogsal(a)gmail.com>, Paul Ganssle <1377457+pganssl e(a)users.noreply.github.com>, Petr Viktorin <encukou(a)gmail.com>, Sam Bull <git(a)sambull.org>, Sam Carroll <70000253+samcarroll42(a)users.noreply.github.com>, Sam Morris <sam(a)robots.org.uk>, Sebastian Berg <sebastianb(a)nvidia.com>, Sebastian Pipping <sebastian(a)pipping.org>, Serhiy Storchaka <storchaka(a)gmail.com>, Shantanu <12621235+hauntsaninja(a)users.noreply.github.com>, Terry Jan Reedy <tjreedy(a)udel.edu>, Tian Gao <gaogaotiantian(a)hotmail.com>, Tomas R <tomas.roun8(a)gmail.com>, Victor Stinner <vstinner(a)python.org>, Zhang Na <44800775+loongson-zn(a)users.noreply.github.com>, chgnrdv <52372310+chgnrdv(a)users.noreply.github.com>, dependabot[bot] <49699333+dependabot[bot](a)users.noreply.github.com>, penguin_wwy <940375606(a)qq.com>, samschott <sam.schott(a)outlook.com>, sunmy2019 <59365878+sunmy2019(a)users.noreply.github.com>, ymki4360 <132453923+ymki4360(a)users.noreply.github.com> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 20, done. remote: Counting objects: 5% (1/20) remote: Counting objects: 10% (2/20) remote: Counting objects: 15% (3/20) remote: Counting objects: 20% (4/20) remote: Counting objects: 25% (5/20) remote: Counting objects: 30% (6/20) remote: Counting objects: 35% (7/20) remote: Counting objects: 40% (8/20) remote: Counting objects: 45% (9/20) remote: Counting objects: 50% (10/20) remote: Counting objects: 55% (11/20) remote: Counting objects: 60% (12/20) remote: Counting objects: 65% (13/20) remote: Counting objects: 70% (14/20) remote: Counting objects: 75% (15/20) remote: Counting objects: 80% (16/20) remote: Counting objects: 85% (17/20) remote: Counting objects: 90% (18/20) remote: Counting objects: 95% (19/20) remote: Counting objects: 100% (20/20) remote: Counting objects: 100% (20/20), done. remote: Compressing objects: 5% (1/20) remote: Compressing objects: 10% (2/20) remote: Compressing objects: 15% (3/20) remote: Compressing objects: 20% (4/20) remote: Compressing objects: 25% (5/20) remote: Compressing objects: 30% (6/20) remote: Compressing objects: 35% (7/20) remote: Compressing objects: 40% (8/20) remote: Compressing objects: 45% (9/20) remote: Compressing objects: 50% (10/20) remote: Compressing objects: 55% (11/20) remote: Compressing objects: 60% (12/20) remote: Compressing objects: 65% (13/20) remote: Compressing objects: 70% (14/20) remote: Compressing objects: 75% (15/20) remote: Compressing objects: 80% (16/20) remote: Compressing objects: 85% (17/20) remote: Compressing objects: 90% (18/20) remote: Compressing objects: 95% (19/20) remote: Compressing objects: 100% (20/20) remote: Compressing objects: 100% (20/20), done. remote: Total 20 (delta 0), reused 9 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to '26baa747c2ebc2beeff769bb07b5fb5a51ad5f4b'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 26baa747c2 gh-104341: Adjust tstate_must_exit() to Respect Interpreter Finalization (gh-104437) Switched to and reset branch 'main' find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [Makefile:2775: clean-retain-profile] Error 1 (ignored) In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:356:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 356 | case 18: EXTRACT_DIGIT(s, x, 100000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^ Timeout (0:15:00)! Thread 0x000003ffa60f7080 (most recent call first): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/selectors.py", line 415 in select File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 2075 in _communicate File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 1207 in communicate File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 550 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 25 in _run_quiet File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 198 in freeze File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/test_tools/test_freeze.py", line 28 in test_freeze_simple_script File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 589 in _callTestMethod File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 634 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 690 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/runner.py", line 240 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/support/__init__.py", line 1106 in _run_suite File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/support/__init__.py", line 1232 in run_unittest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 294 in _test_module File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 330 in _runtest_inner2 File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 373 in _runtest_inner File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 248 in _runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 278 in runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 783 in _main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 738 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 802 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/__main__.py", line 2 in <module> File "<frozen runpy>", line 88 in _run_code File "<frozen runpy>", line 198 in _run_module_as_main make: *** [Makefile:1986: buildbottest] Error 1 Cannot open file '/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/test-results.xml' for upload Test report =========== Failed tests: - test_threading - test_tools Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) uploading test-results.xml (failure) (main)
by buildbot＠python.org 15 May '23

15 May '23

The Buildbot has detected a new failure on builder s390x Fedora LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/545/builds/3789 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-z Build Reason: <unknown> Blamelist: Adam Turner <9087854+AA-Turner(a)users.noreply.github.com>, Alex Henrie <alexhenrie24(a)gmail.com>, Alex Waygood <Alex.Waygood(a)Gmail.com>, Alexey Namyotkin <62434915+nametkin(a)users.noreply.github.com>, Arjun <ccldarjun(a)icloud.com>, Arthur Pastel <arthur.pastel(a)gmail.com>, Barney Gale <barney.gale(a)gmail.com>, Ben Kallus <49924171+kenballus(a)users.noreply.github.com>, Brandt Bucher <brandtbucher(a)microsoft.com>, Burak Saler <59198732+buraksaler(a)users.noreply.github.com>, Carey Metcalfe <carey(a)cmetcalfe.ca>, Carl Meyer <carl(a)oddbird.net>, Charles Machalow <csm10495(a)gmail.com>, Christopher Chavez <chrischavez(a)gmx.us>, David Foster <david(a)dafoster.net>, Dong-hee Na <donghee.na(a)python.org>, Eric Snow <ericsnowcurrently(a)gmail.com>, Erlend E. Aasland <erlend.aasland(a)protonmail.com>, Gleb Smirnoff <glebius(a)FreeBSD.org>, Gregory P. Smith <greg(a)krypto.org>, Gregory Szorc <gregory.szorc(a)gmail.com>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, Irit Katriel <1055913+iritkatriel@users. noreply.github.com>, Itamar Ostricher <itamarost(a)gmail.com>, Jacob Bower <1978924+jbower-fb(a)users.noreply.github.com>, Jakub Kulík <Kulikjak(a)gmail.com>, James Gerity <snoopjedi(a)gmail.com>, Jelle Zijlstra <jelle.zijlstra(a)gmail.com>, Jeong, YunWon <69878+youknowone(a)users.noreply.github.com>, John Belmonte <john(a)neggie.net>, JohnJamesUtley <81572567+JohnJamesUtley(a)users.noreply.github.com>, Jonathan Protzenko <protz(a)microsoft.com>, Jurica Bradarić <jbradaric(a)users.noreply.github.com>, Kevin Krakauer <kevinGC(a)users.noreply.github.com>, Kirill Podoprigora <kirill.bast9(a)mail.ru>, Kumar Aditya <59607654+kumaraditya303(a)users.noreply.github.com>, Lysandros Nikolaou <lisandrosnik(a)gmail.com>, Mark Shannon <mark(a)hotpy.org>, Michael Blahay <mblahay(a)users.noreply.github.com>, Nathaniel J. Smith <njs(a)pobox.com>, Ned Batchelder <ned(a)nedbatchelder.com>, Nikita Sobolev <mail(a)sobolevn.me>, Oleg Iarygin <oleg(a)arhadthedev.net>, Pablo Galindo Salgado <Pablogsal(a)gmail.com>, Paul Ganssle <1377457+pganssl e(a)users.noreply.github.com>, Petr Viktorin <encukou(a)gmail.com>, Sam Bull <git(a)sambull.org>, Sam Carroll <70000253+samcarroll42(a)users.noreply.github.com>, Sam Morris <sam(a)robots.org.uk>, Sebastian Berg <sebastianb(a)nvidia.com>, Sebastian Pipping <sebastian(a)pipping.org>, Serhiy Storchaka <storchaka(a)gmail.com>, Shantanu <12621235+hauntsaninja(a)users.noreply.github.com>, Terry Jan Reedy <tjreedy(a)udel.edu>, Tian Gao <gaogaotiantian(a)hotmail.com>, Tomas R <tomas.roun8(a)gmail.com>, Victor Stinner <vstinner(a)python.org>, Yuxin Wu <ppwwyyxxc(a)gmail.com>, Zhang Na <44800775+loongson-zn(a)users.noreply.github.com>, chgnrdv <52372310+chgnrdv(a)users.noreply.github.com>, dependabot[bot] <49699333+dependabot[bot](a)users.noreply.github.com>, penguin_wwy <940375606(a)qq.com>, samschott <sam.schott(a)outlook.com>, sunmy2019 <59365878+sunmy2019(a)users.noreply.github.com>, ymki4360 <132453923+ymki4360(a)users.noreply.github.com> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 73, done. remote: Counting objects: 1% (1/69) remote: Counting objects: 2% (2/69) remote: Counting objects: 4% (3/69) remote: Counting objects: 5% (4/69) remote: Counting objects: 7% (5/69) remote: Counting objects: 8% (6/69) remote: Counting objects: 10% (7/69) remote: Counting objects: 11% (8/69) remote: Counting objects: 13% (9/69) remote: Counting objects: 14% (10/69) remote: Counting objects: 15% (11/69) remote: Counting objects: 17% (12/69) remote: Counting objects: 18% (13/69) remote: Counting objects: 20% (14/69) remote: Counting objects: 21% (15/69) remote: Counting objects: 23% (16/69) remote: Counting objects: 24% (17/69) remote: Counting objects: 26% (18/69) remote: Counting objects: 27% (19/69) remote: Counting objects: 28% (20/69) remote: Counting objects: 30% (21/69) remote: Counting objects: 31% (22/69) remote: Counting objects: 33% (23/69) remote: Counting objects: 34% (24/69) remote: Counting objects: 36% (25/69) remote: Counting objects: 37% (26/69) remote: Counting objects: 39% (27/69) remote: Counting objects: 40% (28/69) remote: Counting objects: 42% (29/69) remote: Counting objects: 43% (30/69) remote: Counting objects: 44% (31/69) remote: Counting objects: 46% (32/69) remote: Counting objects: 47% (33/69) remote: Counting objects: 49% (34/69) remote: Counting objects: 50% (35/69) remote: Counting objects: 52% (36/69) remote: Counting objects: 53% (37/69) remote: Counting objects: 55% (38/69) remote: Counting objects: 56% (39/69) remote: Counting objects: 57% (40/69) remote: Counting objects: 59% (41/69) remote: Counting objects: 60% (42/69) remote: Counting objects: 62% (43/69) remote: Counting objects: 63% (44/69) remote: Counting objects: 65% (45/69) remote: Counting objects: 66% (46/69) remote: Counting objects: 68% (47/69) remote: Counting objects: 69% (48/69) remote: Counting objects: 71% (49/69) remote: Counting objects: 72% (50/69) remote: Counting objects: 73% (51/69) remote: Counting objects: 75% (52/69) remote: Counting objects: 76% (53/69) remote: Counting objects: 78% (54/69) remote: Counting objects: 79% (55/69) remote: Counting objects: 81% (56/69) remote: Counting objects: 82% (57/69) remote: Counting objects: 84% (58/69) remote: Counting objects: 85% (59/69) remote: Counting objects: 86% (60/69) remote: Counting objects: 88% (61/69) remote: Counting objects: 89% (62/69) remote: Counting objects: 91% (63/69) remote: Counting objects: 92% (64/69) remote: Counting objects: 94% (65/69) remote: Counting objects: 95% (66/69) remote: Counting objects: 97% (67/69) remote: Counting objects: 98% (68/69) remote: Counting objects: 100% (69/69) remote: Counting objects: 100% (69/69), done. remote: Compressing objects: 2% (1/40) remote: Compressing objects: 5% (2/40) remote: Compressing objects: 7% (3/40) remote: Compressing objects: 10% (4/40) remote: Compressing objects: 12% (5/40) remote: Compressing objects: 15% (6/40) remote: Compressing objects: 17% (7/40) remote: Compressing objects: 20% (8/40) remote: Compressing objects: 22% (9/40) remote: Compressing objects: 25% (10/40) remote: Compressing objects: 27% (11/40) remote: Compressing objects: 30% (12/40) remote: Compressing objects: 32% (13/40) remote: Compressing objects: 35% (14/40) remote: Compressing objects: 37% (15/40) remote: Compressing objects: 40% (16/40) remote: Compressing objects: 42% (17/40) remote: Compressing objects: 45% (18/40) remote: Compressing objects: 47% (19/40) remote: Compressing objects: 50% (20/40) remote: Compressing objects: 52% (21/40) remote: Compressing objects: 55% (22/40) remote: Compressing objects: 57% (23/40) remote: Compressing objects: 60% (24/40) remote: Compressing objects: 62% (25/40) remote: Compressing objects: 65% (26/40) remote: Compressing objects: 67% (27/40) remote: Compressing objects: 70% (28/40) remote: Compressing objects: 72% (29/40) remote: Compressing objects: 75% (30/40) remote: Compressing objects: 77% (31/40) remote: Compressing objects: 80% (32/40) remote: Compressing objects: 82% (33/40) remote: Compressing objects: 85% (34/40) remote: Compressing objects: 87% (35/40) remote: Compressing objects: 90% (36/40) remote: Compressing objects: 92% (37/40) remote: Compressing objects: 95% (38/40) remote: Compressing objects: 97% (39/40) remote: Compressing objects: 100% (40/40) remote: Compressing objects: 100% (40/40), done. remote: Total 73 (delta 30), reused 44 (delta 29), pack-reused 4 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to '186bf39f5c6003912e4f445430c504db51b9a743'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 186bf39f5c gh-101819: Isolate `_io` (#101948) Switched to and reset branch 'main' find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [Makefile:2775: clean-retain-profile] Error 1 (ignored) In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:356:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 356 | case 18: EXTRACT_DIGIT(s, x, 100000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^ Timeout (0:15:00)! Thread 0x000003ff993f7080 (most recent call first): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/selectors.py", line 415 in select File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 2075 in _communicate File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 1207 in communicate File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 550 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 25 in _run_quiet File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 198 in freeze File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/test_tools/test_freeze.py", line 28 in test_freeze_simple_script File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 589 in _callTestMethod File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 634 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 690 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/runner.py", line 240 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/support/__init__.py", line 1106 in _run_suite File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/support/__init__.py", line 1232 in run_unittest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 294 in _test_module File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 330 in _runtest_inner2 File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 373 in _runtest_inner File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 248 in _runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 278 in runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 783 in _main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 738 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 802 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/__main__.py", line 2 in <module> File "<frozen runpy>", line 88 in _run_code File "<frozen runpy>", line 198 in _run_module_as_main make: *** [Makefile:1986: buildbottest] Error 1 Cannot open file '/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/test-results.xml' for upload Test report =========== Failed tests: - test_tools Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed update (failure) Uninstalled (failure) clean (failure) (main)
by buildbot＠python.org 15 May '23

15 May '23

The Buildbot has detected a new failure on builder PPC64LE Fedora Rawhide Clang Installed 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/312/builds/3781 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-rawhide-ppc64le Build Reason: <unknown> Blamelist: Alex Henrie <alexhenrie24(a)gmail.com>, Alex Waygood <Alex.Waygood(a)Gmail.com>, Ben Kallus <49924171+kenballus(a)users.noreply.github.com>, Brandt Bucher <brandtbucher(a)microsoft.com>, Carl Meyer <carl(a)oddbird.net>, Charles Machalow <csm10495(a)gmail.com>, Dong-hee Na <donghee.na(a)python.org>, Erlend E. Aasland <erlend.aasland(a)protonmail.com>, Gregory Szorc <gregory.szorc(a)gmail.com>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, James Gerity <snoopjedi(a)gmail.com>, Jelle Zijlstra <jelle.zijlstra(a)gmail.com>, Jeong, YunWon <69878+youknowone(a)users.noreply.github.com>, Jonathan Protzenko <protz(a)microsoft.com>, Jurica Bradarić <jbradaric(a)users.noreply.github.com>, Kirill Podoprigora <kirill.bast9(a)mail.ru>, Kumar Aditya <59607654+kumaraditya303(a)users.noreply.github.com>, Mark Shannon <mark(a)hotpy.org>, Ned Batchelder <ned(a)nedbatchelder.com>, Nikita Sobolev <mail(a)sobolevn.me>, Paul Ganssle <1377457+pganssle(a)users.noreply.github.com>, Sam Bull <git(a)sambull.org>, Terry Jan Reedy <tjre edy(a)udel.edu> BUILD FAILED: failed update (failure) Uninstalled (failure) clean (failure) Summary of the results of the build (if available): =================================================== Captured traceback ================== fatal: unable to access 'https://github.com/python/cpython.git/': Recv failure: Connection reset by peer chmod: cannot access 'target/': No such file or directory make: *** No rule to make target 'distclean'. Stop. Test report =========== Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) uploading test-results.xml (failure) (main)
by buildbot＠python.org 15 May '23

15 May '23

The Buildbot has detected a new failure on builder wasm32-emscripten node (dynamic linking) 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1056/builds/2009 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: bcannon-wasm Build Reason: <unknown> Blamelist: Gregory Szorc <gregory.szorc(a)gmail.com> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Tests result: FAILURE == 335 tests OK. 10 slowest tests: - test_hashlib: 2 min 2 sec - test_math: 1 min 48 sec - test_tokenize: 1 min 13 sec - test_unparse: 47.8 sec - test_lib2to3: 45.5 sec - test_capi: 32.6 sec - test_tarfile: 25.0 sec - test_fstring: 23.6 sec - test_unicodedata: 21.4 sec - test_pickle: 17.0 sec 1 test failed: test_bytes 127 tests skipped: test.test_asyncio.test_base_events test.test_asyncio.test_buffered_proto test.test_asyncio.test_context test.test_asyncio.test_eager_task_factory test.test_asyncio.test_events test.test_asyncio.test_futures test.test_asyncio.test_futures2 test.test_asyncio.test_locks test.test_asyncio.test_pep492 test.test_asyncio.test_proactor_events test.test_asyncio.test_protocols test.test_asyncio.test_queues test.test_asyncio.test_runners test.test_asyncio.test_selector_events test.test_asyncio.test_sendfile test.test_asyncio.test_server test.test_asyncio.test_sock_lowlevel test.test_asyncio.test_ssl test.test_asyncio.test_sslproto test.test_asyncio.test_streams test.test_asyncio.test_subprocess test.test_asyncio.test_taskgroups test.test_asyncio.test_tasks test.test_asyncio.test_threads test.test_asyncio.test_timeouts test.test_asyncio.test_transports test.test_asyncio.test_unix_events test.test_asyncio.test_waitfor test.test_asyncio.test_windows_events test.test_asyncio.test_windows_utils test__xxinterpchannels test__xxsubinterpreters test_asyncgen test_clinic test_cmd_line test_concurrent_futures test_contextlib_async test_ctypes test_curses test_dbm_gnu test_dbm_ndbm test_devpoll test_doctest test_docxmlrpc test_dtrace test_embed test_epoll test_faulthandler test_fcntl test_file_eintr test_fork1 test_ftplib test_gdb test_grp test_httplib test_httpservers test_idle test_imaplib test_interpreters test_ioctl test_kqueue test_launcher test_lzma test_mmap test_msilib test_multiprocessing_fork test_multiprocessing_forkserver test_multiprocessing_main_handling test_multiprocessing_spawn test_nis test_openpty test_ossaudiodev test_pdb test_peg_generator test_perf_profiler test_poll test_poplib test_pty test_pwd test_queue test_readline test_regrtest test_repl test_resource test_select test_selectors test_smtplib test_smtpnet test_socket test_socketserver test_spwd test_ssl test_stable_abi_ctypes test_startfile test_subprocess test_sys_settrace test_syslog test_tcl test_telnetlib test_thread test_threadedtempfile test_threading test_threading_local test_tix test_tkinter test_tools test_ttk test_ttk_textonly test_turtle test_urllib2 test_urllib2_localnet test_urllib2net test_urllibnet test_venv test_wait3 test_wait4 test_webbrowser test_winconsoleio test_winreg test_winsound test_wmi test_wsgiref test_xmlrpc test_xmlrpc_net test_zipfile64 test_zipimport_support test_zoneinfo 0:25:49 load avg: 10.37 0:25:49 load avg: 10.37 Re-running failed tests is not supported with --python host runner option. Total duration: 25 min 49 sec Captured traceback ================== Traceback (most recent call last): File "/opt/buildbot/bcannon-wasm/3.x.bcannon-wasm.emscripten-node-dl/build/Lib/test/string_tests.py", line 341, in test_find_periodic_pattern self.checkequal(reference_find(p, text), File "/opt/buildbot/bcannon-wasm/3.x.bcannon-wasm.emscripten-node-dl/build/Lib/test/string_tests.py", line 66, in checkequal self.assertEqual( AssertionError: -1 != 0 Test report =========== Failed tests: - test_bytes Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) uploading test-results.xml (failure) (main)
by buildbot＠python.org 15 May '23

15 May '23

The Buildbot has detected a new failure on builder s390x Fedora LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/545/builds/3786 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-z Build Reason: <unknown> Blamelist: Adam Turner <9087854+AA-Turner(a)users.noreply.github.com>, Alex Henrie <alexhenrie24(a)gmail.com>, Alex Waygood <Alex.Waygood(a)Gmail.com>, Alexey Namyotkin <62434915+nametkin(a)users.noreply.github.com>, Arjun <ccldarjun(a)icloud.com>, Arthur Pastel <arthur.pastel(a)gmail.com>, Barney Gale <barney.gale(a)gmail.com>, Barry Warsaw <barry(a)python.org>, Ben Kallus <49924171+kenballus(a)users.noreply.github.com>, Brandt Bucher <brandtbucher(a)microsoft.com>, Burak Saler <59198732+buraksaler(a)users.noreply.github.com>, Carey Metcalfe <carey(a)cmetcalfe.ca>, Carl Meyer <carl(a)oddbird.net>, Charles Machalow <csm10495(a)gmail.com>, Christopher Chavez <chrischavez(a)gmx.us>, David Foster <david(a)dafoster.net>, Dong-hee Na <donghee.na(a)python.org>, Eric Snow <ericsnowcurrently(a)gmail.com>, Erlend E. Aasland <erlend.aasland(a)protonmail.com>, Gleb Smirnoff <glebius(a)FreeBSD.org>, Gregory P. Smith <greg(a)krypto.org>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, Irit Katriel <1055913+iritkatriel(a)users.noreply. github.com>, Itamar Ostricher <itamarost(a)gmail.com>, Jacob Bower <1978924+jbower-fb(a)users.noreply.github.com>, Jakub Kulík <Kulikjak(a)gmail.com>, James Gerity <snoopjedi(a)gmail.com>, Jelle Zijlstra <jelle.zijlstra(a)gmail.com>, Jeong, YunWon <69878+youknowone(a)users.noreply.github.com>, John Belmonte <john(a)neggie.net>, JohnJamesUtley <81572567+JohnJamesUtley(a)users.noreply.github.com>, Jonathan Protzenko <protz(a)microsoft.com>, Jurica Bradarić <jbradaric(a)users.noreply.github.com>, Kevin Krakauer <kevinGC(a)users.noreply.github.com>, Kirill Podoprigora <kirill.bast9(a)mail.ru>, Kumar Aditya <59607654+kumaraditya303(a)users.noreply.github.com>, Lysandros Nikolaou <lisandrosnik(a)gmail.com>, Mark Shannon <mark(a)hotpy.org>, Michael Blahay <mblahay(a)users.noreply.github.com>, Nathaniel J. Smith <njs(a)pobox.com>, Ned Batchelder <ned(a)nedbatchelder.com>, Nikita Sobolev <mail(a)sobolevn.me>, Oleg Iarygin <oleg(a)arhadthedev.net>, Pablo Galindo Salgado <Pablogsal(a)gmail.com>, Paul Ganssle <1377457+pganssle@users. noreply.github.com>, Paul Ganssle <git(a)m.ganssle.io>, Petr Viktorin <encukou(a)gmail.com>, Sam Bull <git(a)sambull.org>, Sam Carroll <70000253+samcarroll42(a)users.noreply.github.com>, Sam Morris <sam(a)robots.org.uk>, Sebastian Berg <sebastianb(a)nvidia.com>, Sebastian Pipping <sebastian(a)pipping.org>, Serhiy Storchaka <storchaka(a)gmail.com>, Shantanu <12621235+hauntsaninja(a)users.noreply.github.com>, Terry Jan Reedy <tjreedy(a)udel.edu>, Tian Gao <gaogaotiantian(a)hotmail.com>, Tim Hoffmann <2836374+timhoffm(a)users.noreply.github.com>, Tomas R <tomas.roun8(a)gmail.com>, Victor Stinner <vstinner(a)python.org>, Yuxin Wu <ppwwyyxxc(a)gmail.com>, Zhang Na <44800775+loongson-zn(a)users.noreply.github.com>, chgnrdv <52372310+chgnrdv(a)users.noreply.github.com>, penguin_wwy <940375606(a)qq.com>, samschott <sam.schott(a)outlook.com>, sunmy2019 <59365878+sunmy2019(a)users.noreply.github.com>, ymki4360 <132453923+ymki4360(a)users.noreply.github.com> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 7, done. remote: Counting objects: 14% (1/7) remote: Counting objects: 28% (2/7) remote: Counting objects: 42% (3/7) remote: Counting objects: 57% (4/7) remote: Counting objects: 71% (5/7) remote: Counting objects: 85% (6/7) remote: Counting objects: 100% (7/7) remote: Counting objects: 100% (7/7), done. remote: Compressing objects: 14% (1/7) remote: Compressing objects: 28% (2/7) remote: Compressing objects: 42% (3/7) remote: Compressing objects: 57% (4/7) remote: Compressing objects: 71% (5/7) remote: Compressing objects: 85% (6/7) remote: Compressing objects: 100% (7/7) remote: Compressing objects: 100% (7/7), done. remote: Total 7 (delta 0), reused 5 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to '48b3617de491f00a3bf978b355074cc8e228d61b'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 48b3617de4 gh-104469 Convert _testcapi/float.c to use AC (gh-104470) Switched to and reset branch 'main' find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [Makefile:2714: clean-retain-profile] Error 1 (ignored) In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:356:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 356 | case 18: EXTRACT_DIGIT(s, x, 100000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^ Timeout (0:15:00)! Thread 0x000003ff90477080 (most recent call first): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/selectors.py", line 415 in select File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 2075 in _communicate File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 1207 in communicate File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 550 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 25 in _run_quiet File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 198 in freeze File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/test_tools/test_freeze.py", line 28 in test_freeze_simple_script File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 589 in _callTestMethod File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 634 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 690 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/runner.py", line 240 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/support/__init__.py", line 1106 in _run_suite File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/support/__init__.py", line 1232 in run_unittest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 294 in _test_module File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 330 in _runtest_inner2 File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 373 in _runtest_inner File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 248 in _runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 278 in runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 783 in _main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 738 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 802 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/__main__.py", line 2 in <module> File "<frozen runpy>", line 88 in _run_code File "<frozen runpy>", line 198 in _run_module_as_main make: *** [Makefile:1958: buildbottest] Error 1 Cannot open file '/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/test-results.xml' for upload Test report =========== Failed tests: - test_tools Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): - failed test (failure) (2cd1c87d2a23ffd00730b5d1648304593530326c)
by buildbot＠python.org 15 May '23

15 May '23

The Buildbot has detected a new failure on builder AMD64 CentOS9 Refleaks 3.x while building Python. Full details are available at: https://buildbot.python.org/all/#/builders/853/builds/471 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-CentOS9-x86_64 Build Reason: <unknown> Blamelist: BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Tests result: FAILURE then FAILURE == 444 tests OK. 10 slowest tests: - test_signal: 31 min 47 sec - test_multiprocessing_spawn: 17 min 39 sec - test_concurrent_futures: 14 min 55 sec - test_multiprocessing_forkserver: 9 min 48 sec - test_multiprocessing_fork: 7 min 45 sec - test_gdb: 6 min 27 sec - test_socket: 5 min 50 sec - test_io: 3 min 59 sec - test_subprocess: 3 min 39 sec - test_lib2to3: 3 min 32 sec 1 test failed: test_typing 18 tests skipped: test.test_asyncio.test_windows_events test.test_asyncio.test_windows_utils test_devpoll test_ioctl test_kqueue test_launcher test_msilib test_nis test_peg_generator test_startfile test_tix test_tkinter test_ttk test_winconsoleio test_winreg test_winsound test_wmi test_zipfile64 3 re-run tests: test__xxsubinterpreters test_import test_typing Total duration: 58 min 12 sec Captured traceback ================== TracebackTests.test_syntax_error) ... ok TracebackTests.test_broken_parent) ... ok TracebackTests.test_nonexistent_module) ... ok TracebackTests.test_unencodable_filename) ... ok TracebackTests.test_nonexistent_module_nested) ... ok TracebackTests.test_exec_failure) ... ok TracebackTests.test_import_bug) ... ok TracebackTests.test_broken_parent_from) ... ok TracebackTests.test_broken_from) ... ok Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=2118470) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/resource_tracker.py:224: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=2118470) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/resource_tracker.py:224: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=2118470) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/resource_tracker.py:224: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=2118470) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/resource_tracker.py:224: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=2118470) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/resource_tracker.py:224: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory . TracebackTests.test_broken_submodule) ... ok TracebackTests.test_exec_failure_nested) ... ok Test report =========== Failed tests: - test__xxsubinterpreters - test_import - test_typing Test leaking resources: - test_import: references - test_typing: memory blocks - test_import: memory blocks Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder aarch64 Fedora Stable Refleaks 3.x while building Python. Full details are available at: https://buildbot.python.org/all/#/builders/123/builds/726 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-stable-aarch64 Build Reason: <unknown> Blamelist: BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Tests result: FAILURE then FAILURE == 445 tests OK. 10 slowest tests: - test_signal: 31 min 29 sec - test_multiprocessing_spawn: 22 min 45 sec - test_concurrent_futures: 18 min 12 sec - test_socket: 14 min 5 sec - test_multiprocessing_forkserver: 11 min 59 sec - test.test_asyncio.test_tasks: 10 min 27 sec - test_multiprocessing_fork: 10 min 19 sec - test_gdb: 7 min 33 sec - test_subprocess: 5 min 42 sec - test_regrtest: 5 min 41 sec 1 test failed: test_import 17 tests skipped: test.test_asyncio.test_windows_events test.test_asyncio.test_windows_utils test_devpoll test_ioctl test_kqueue test_launcher test_msilib test_peg_generator test_startfile test_tix test_tkinter test_ttk test_winconsoleio test_winreg test_winsound test_wmi test_zipfile64 1 re-run test: test_import Total duration: 36 min 3 sec Captured traceback ================== TracebackTests.test_syntax_error) ... ok TracebackTests.test_broken_parent) ... ok TracebackTests.test_nonexistent_module) ... ok TracebackTests.test_unencodable_filename) ... ok TracebackTests.test_nonexistent_module_nested) ... ok TracebackTests.test_exec_failure) ... ok TracebackTests.test_import_bug) ... ok TracebackTests.test_broken_parent_from) ... ok TracebackTests.test_broken_from) ... ok Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=2730521) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/resource_tracker.py:224: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=2730521) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/resource_tracker.py:224: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=2730521) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/resource_tracker.py:224: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=2730521) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/resource_tracker.py:224: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=2730521) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/resource_tracker.py:224: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory . TracebackTests.test_broken_submodule) ... ok TracebackTests.test_exec_failure_nested) ... ok Test report =========== Failed tests: - test_import Test leaking resources: - test_import: references - test_import: memory blocks Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) uploading test-results.xml (failure) (main)
by buildbot＠python.org 14 May '23

14 May '23

The Buildbot has detected a new failure on builder AMD64 Debian root 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/345/builds/4777 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: angelico-debian-amd64 Build Reason: <unknown> Blamelist: Terry Jan Reedy <tjreedy(a)udel.edu> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 9, done. remote: Counting objects: 11% (1/9) remote: Counting objects: 22% (2/9) remote: Counting objects: 33% (3/9) remote: Counting objects: 44% (4/9) remote: Counting objects: 55% (5/9) remote: Counting objects: 66% (6/9) remote: Counting objects: 77% (7/9) remote: Counting objects: 88% (8/9) remote: Counting objects: 100% (9/9) remote: Counting objects: 100% (9/9), done. remote: Compressing objects: 14% (1/7) remote: Compressing objects: 28% (2/7) remote: Compressing objects: 42% (3/7) remote: Compressing objects: 57% (4/7) remote: Compressing objects: 71% (5/7) remote: Compressing objects: 85% (6/7) remote: Compressing objects: 100% (7/7) remote: Compressing objects: 100% (7/7), done. remote: Total 9 (delta 2), reused 7 (delta 2), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to '080a5961527473af182b025bb29e0c52d43fd49e'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 080a596152 GH-71383: IDLE - Document testing subsets of modules (#104463) Switched to and reset branch 'main' configure: WARNING: pkg-config is missing. Some dependencies may not be detected correctly. Fatal Python error: Segmentation fault Thread 0x00007fb1dfb31280 (most recent call first): File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/runner.py", line 74 in _write_status File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/runner.py", line 95 in addSuccess File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/support/testresult.py", line 122 in addSuccess File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/case.py", line 648 in run File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/case.py", line 690 in __call__ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/suite.py", line 122 in run File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/suite.py", line 84 in __call__ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/suite.py", line 122 in run File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/suite.py", line 84 in __call__ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/suite.py", line 122 in run File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/suite.py", line 84 in __call__ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/runner.py", line 240 in run File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/support/__init__.py", line 1106 in _run_suite File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/support/__init__.py", line 1232 in run_unittest File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/libregrtest/runtest.py", line 294 in _test_module File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/libregrtest/runtest.py", line 330 in _runtest_inner2 File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/libregrtest/runtest.py", line 373 in _runtest_inner File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/libregrtest/runtest.py", line 248 in _runtest File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/libregrtest/runtest.py", line 278 in runtest File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/libregrtest/main.py", line 783 in _main File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/libregrtest/main.py", line 738 in main File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/libregrtest/main.py", line 802 in main File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/__main__.py", line 2 in <module> File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/runpy.py", line 88 in _run_code File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/runpy.py", line 198 in _run_module_as_main Extension modules: _testcapi (total: 1) Segmentation fault make: *** [Makefile:1956: buildbottest] Error 139 Cannot open file '/root/buildarea/3.x.angelico-debian-amd64/build/test-results.xml' for upload Test report =========== Failed tests: - test_threading Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) (3.11)
by buildbot＠python.org 14 May '23

14 May '23

The Buildbot has detected a new failure on builder s390x Fedora Rawhide LTO 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/947/builds/673 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-rawhide-z Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Tests result: FAILURE then FAILURE == 418 tests OK. 10 slowest tests: - test_tools: 5 min 45 sec - test_concurrent_futures: 2 min 16 sec - test_multiprocessing_spawn: 1 min 24 sec - test_multiprocessing_forkserver: 1 min 9 sec - test_multiprocessing_fork: 1 min 5 sec - test_asyncio: 1 min 4 sec - test_signal: 47.1 sec - test_socket: 38.1 sec - test_io: 35.4 sec - test_imaplib: 32.5 sec 1 test failed: test_tools 15 tests skipped: test_devpoll test_gdb test_ioctl test_kqueue test_launcher test_msilib test_nis test_startfile test_tix test_tk test_ttk_guionly test_winconsoleio test_winreg test_winsound test_zipfile64 2 re-run tests: test___all__ test_tools Total duration: 12 min 56 sec Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto/build/Lib/test/test_tools/test_freeze.py", line 27, in test_freeze_simple_script outdir, scriptfile, python = helper.prepare(script, outdir) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto/build/Tools/freeze/test/freeze.py", line 180, in prepare _run_quiet([MAKE, '-C', builddir, parallel]) File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto/build/Tools/freeze/test/freeze.py", line 25, in _run_quiet return subprocess.run( ^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto/build/Lib/subprocess.py", line 571, in run raise CalledProcessError(retcode, process.args, subprocess.CalledProcessError: Command '['/usr/bin/make', '-C', '/tmp/tmp51orx53i/python-build', '-j2']' returned non-zero exit status 2. Traceback (most recent call last): File "<string>", line 1, in <module> File "/tmp/tmpy6fdpc1e/cpython/Lib/sysconfig.py", line 715, in get_config_var return get_config_vars().get(name) ^^^^^^^^^^^^^^^^^ File "/tmp/tmpy6fdpc1e/cpython/Lib/sysconfig.py", line 670, in get_config_vars _init_posix(_CONFIG_VARS) File "/tmp/tmpy6fdpc1e/cpython/Lib/sysconfig.py", line 531, in _init_posix _temp = __import__(name, globals(), locals(), ['build_time_vars'], 0) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ModuleNotFoundError: No module named '_sysconfigdata__linux_s390x-linux-gnu' Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto/build/Lib/multiprocessing/resource_tracker.py", line 209, in main cache[rtype].remove(name) KeyError: '/psm_107cb27d' Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto/build/Lib/test/test_tools/test_freeze.py", line 27, in test_freeze_simple_script outdir, scriptfile, python = helper.prepare(script, outdir) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto/build/Tools/freeze/test/freeze.py", line 184, in prepare _run_quiet([MAKE, '-C', builddir, 'install']) File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto/build/Tools/freeze/test/freeze.py", line 25, in _run_quiet return subprocess.run( ^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto/build/Lib/subprocess.py", line 571, in run raise CalledProcessError(retcode, process.args, subprocess.CalledProcessError: Command '['/usr/bin/make', '-C', '/tmp/tmpy6fdpc1e/python-build', 'install']' returned non-zero exit status 2. Traceback (most recent call last): File "<string>", line 1, in <module> File "/tmp/tmp51orx53i/cpython/Lib/sysconfig.py", line 715, in get_config_var return get_config_vars().get(name) ^^^^^^^^^^^^^^^^^ File "/tmp/tmp51orx53i/cpython/Lib/sysconfig.py", line 670, in get_config_vars _init_posix(_CONFIG_VARS) File "/tmp/tmp51orx53i/cpython/Lib/sysconfig.py", line 531, in _init_posix _temp = __import__(name, globals(), locals(), ['build_time_vars'], 0) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ModuleNotFoundError: No module named '_sysconfigdata__linux_s390x-linux-gnu' Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto/build/Lib/multiprocessing/resource_tracker.py", line 209, in main cache[rtype].remove(name) KeyError: '/psm_c78be4fe' Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto/build/Lib/multiprocessing/resource_tracker.py", line 209, in main cache[rtype].remove(name) KeyError: '/psm_e86024db' Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto/build/Lib/test/test___all__.py", line 129, in test_all self.check_all(modname) File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto/build/Lib/test/test___all__.py", line 43, in check_all with warnings_helper.check_warnings( File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto/build/Lib/contextlib.py", line 144, in __exit__ next(self.gen) File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto/build/Lib/test/support/warnings_helper.py", line 185, in _filterwarnings raise AssertionError("unhandled warning %s" % reraise[0]) AssertionError: unhandled warning {message : DeprecationWarning("invalid escape sequence '\\?'"), category : 'DeprecationWarning', filename : '/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto/build/Lib/test/test_httpservers.py', lineno : 445, line : None} Test report =========== Failed tests: - test_tools Failed subtests: - test_freeze_simple_script - test.test_tools.test_freeze.TestFreeze.test_freeze_simple_script - test_all - test.test___all__.AllTest.test_all Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora Rawhide LTO + PGO 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1037/builds/746 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-rawhide-z Build Reason: <unknown> Blamelist: Adam Turner <9087854+AA-Turner(a)users.noreply.github.com>, Alex Waygood <Alex.Waygood(a)Gmail.com>, Brandt Bucher <brandtbucher(a)microsoft.com>, Dong-hee Na <donghee.na(a)python.org>, Erlend E. Aasland <erlend.aasland(a)protonmail.com>, Lysandros Nikolaou <lisandrosnik(a)gmail.com>, Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com>, Shantanu <12621235+hauntsaninja(a)users.noreply.github.com>, Terry Jan Reedy <tjreedy(a)udel.edu>, Tian Gao <gaogaotiantian(a)hotmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Tests result: FAILURE then FAILURE == 418 tests OK. 10 slowest tests: - test_concurrent_futures: 2 min 17 sec - test_multiprocessing_spawn: 1 min 27 sec - test_multiprocessing_forkserver: 1 min 8 sec - test_asyncio: 1 min 4 sec - test_multiprocessing_fork: 1 min 3 sec - test_signal: 47.2 sec - test_socket: 38.3 sec - test_io: 32.1 sec - test_imaplib: 32.1 sec - test_xmlrpc: 27.5 sec 1 test failed: test_tools 15 tests skipped: test_devpoll test_gdb test_ioctl test_kqueue test_launcher test_msilib test_nis test_startfile test_tix test_tk test_ttk_guionly test_winconsoleio test_winreg test_winsound test_zipfile64 1 re-run test: test_tools Total duration: 23 min 4 sec Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/multiprocessing/resource_tracker.py", line 209, in main cache[rtype].remove(name) KeyError: '/psm_aedf631e' Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/test/test_tools/test_freeze.py", line 27, in test_freeze_simple_script outdir, scriptfile, python = helper.prepare(script, outdir) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 180, in prepare _run_quiet([MAKE, '-C', builddir, parallel]) File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 25, in _run_quiet return subprocess.run( ^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/subprocess.py", line 571, in run raise CalledProcessError(retcode, process.args, subprocess.CalledProcessError: Command '['/usr/bin/make', '-C', '/tmp/tmp6qzzsd9r/python-build', '-j2']' returned non-zero exit status 2. Traceback (most recent call last): File "<string>", line 1, in <module> File "/tmp/tmp6qzzsd9r/cpython/Lib/sysconfig.py", line 715, in get_config_var return get_config_vars().get(name) ^^^^^^^^^^^^^^^^^ File "/tmp/tmp6qzzsd9r/cpython/Lib/sysconfig.py", line 670, in get_config_vars _init_posix(_CONFIG_VARS) File "/tmp/tmp6qzzsd9r/cpython/Lib/sysconfig.py", line 531, in _init_posix _temp = __import__(name, globals(), locals(), ['build_time_vars'], 0) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ModuleNotFoundError: No module named '_sysconfigdata__linux_s390x-linux-gnu' Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/multiprocessing/resource_tracker.py", line 209, in main cache[rtype].remove(name) KeyError: '/psm_9605490b' Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/multiprocessing/resource_tracker.py", line 209, in main cache[rtype].remove(name) KeyError: '/psm_cd97bb73' Test report =========== Failed tests: - test_tools Failed subtests: - test_freeze_simple_script - test.test_tools.test_freeze.TestFreeze.test_freeze_simple_script Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) uploading test-results.xml (failure) (main)
by buildbot＠python.org 14 May '23

14 May '23

The Buildbot has detected a new failure on builder AMD64 Arch Linux TraceRefs 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/484/builds/3298 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: pablogsal-arch-x86_64 Build Reason: <unknown> Blamelist: Charles Machalow <csm10495(a)gmail.com> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 4, done. remote: Counting objects: 25% (1/4) remote: Counting objects: 50% (2/4) remote: Counting objects: 75% (3/4) remote: Counting objects: 100% (4/4) remote: Counting objects: 100% (4/4), done. remote: Compressing objects: 25% (1/4) remote: Compressing objects: 50% (2/4) remote: Compressing objects: 75% (3/4) remote: Compressing objects: 100% (4/4) remote: Compressing objects: 100% (4/4), done. remote: Total 4 (delta 0), reused 3 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to '7d2deafb73237a2175971a26cfb544974661de4b'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 7d2deafb73 gh-104454: Fix refleak in AttributeError_reduce (#104455) Switched to and reset branch 'main' Objects/object.c:2204: _Py_ForgetReference: Assertion failed: invalid object chain Enable tracemalloc to get the memory block allocation traceback object address : 0x7f01b75355b0 object refcount : 0 object type : 0x55a1f229bd00 object type name: generator object repr : <refcnt 0 at 0x7f01b75355b0> Fatal Python error: _PyObject_AssertFailed: _PyObject_AssertFailed Python runtime state: initialized Thread 0x00007f01b60856c0 (most recent call first): File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/test__xxsubinterpreters.py", line 58 in run File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/threading.py", line 989 in run File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/threading.py", line 1052 in _bootstrap_inner File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/threading.py", line 1009 in _bootstrap Current thread 0x00007f01b7715740 (most recent call first): File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/test__xxsubinterpreters.py", line 49 in _wait_for_interp_to_run File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/test__xxsubinterpreters.py", line 66 in _running File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/contextlib.py", line 137 in __enter__ File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/test__xxsubinterpreters.py", line 701 in test_already_running File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/case.py", line 589 in _callTestMethod File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/case.py", line 634 in run File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/case.py", line 690 in __call__ File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/suite.py", line 122 in run File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/suite.py", line 84 in __call__ File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/suite.py", line 122 in run File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/suite.py", line 84 in __call__ File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/suite.py", line 122 in run File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/suite.py", line 84 in __call__ File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/runner.py", line 240 in run File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/support/__init__.py", line 1106 in _run_suite File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/support/__init__.py", line 1232 in run_unittest File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/runtest.py", line 294 in _test_module File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/runtest.py", line 330 in _runtest_inner2 File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/runtest.py", line 373 in _runtest_inner File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/runtest.py", line 248 in _runtest File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/runtest.py", line 278 in runtest File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/main.py", line 783 in _main File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/main.py", line 738 in main File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/main.py", line 802 in main File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/__main__.py", line 2 in <module> File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/runpy.py", line 88 in _run_code File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/runpy.py", line 198 in _run_module_as_main Extension modules: _testcapi, _xxsubinterpreters (total: 2) make: *** [Makefile:1962: buildbottest] Aborted (core dumped) Cannot open file '/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/test-results.xml' for upload Test report =========== Failed tests: - test__xxsubinterpreters Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora Rawhide LTO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/323/builds/2465 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-rawhide-z Build Reason: <unknown> Blamelist: Charles Machalow <csm10495(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Tests result: FAILURE then FAILURE == 442 tests OK. 10 slowest tests: - test_tools: 5 min 57 sec - test_concurrent_futures: 2 min 8 sec - test_multiprocessing_spawn: 1 min 31 sec - test_signal: 1 min 14 sec - test_multiprocessing_forkserver: 1 min 8 sec - test_multiprocessing_fork: 1 min 5 sec - test_socket: 44.6 sec - test_io: 33.8 sec - test_math: 32.8 sec - test_imaplib: 31.8 sec 1 test failed: test_tools 20 tests skipped: test.test_asyncio.test_windows_events test.test_asyncio.test_windows_utils test_devpoll test_gdb test_ioctl test_kqueue test_launcher test_msilib test_nis test_peg_generator test_perf_profiler test_startfile test_tix test_tkinter test_ttk test_winconsoleio test_winreg test_winsound test_wmi test_zipfile64 1 re-run test: test_tools Total duration: 14 min 35 sec Captured traceback ================== Traceback (most recent call last): File "<string>", line 1, in <module> File "/tmp/test_python_jqeyby0k/tmpd6l4oa61/cpython/Lib/sysconfig.py", line 740, in get_config_var return get_config_vars().get(name) ^^^^^^^^^^^^^^^^^ File "/tmp/test_python_jqeyby0k/tmpd6l4oa61/cpython/Lib/sysconfig.py", line 723, in get_config_vars _init_config_vars() File "/tmp/test_python_jqeyby0k/tmpd6l4oa61/cpython/Lib/sysconfig.py", line 670, in _init_config_vars _init_posix(_CONFIG_VARS) File "/tmp/test_python_jqeyby0k/tmpd6l4oa61/cpython/Lib/sysconfig.py", line 536, in _init_posix _temp = __import__(name, globals(), locals(), ['build_time_vars'], 0) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ModuleNotFoundError: No module named '_sysconfigdata__linux_s390x-linux-gnu' Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto/build/Lib/test/test_tools/test_freeze.py", line 27, in test_freeze_simple_script outdir, scriptfile, python = helper.prepare(script, outdir) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto/build/Tools/freeze/test/freeze.py", line 180, in prepare _run_quiet([MAKE, '-C', builddir, parallel]) File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto/build/Tools/freeze/test/freeze.py", line 25, in _run_quiet return subprocess.run( ^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto/build/Lib/subprocess.py", line 571, in run raise CalledProcessError(retcode, process.args, subprocess.CalledProcessError: Command '['/usr/bin/make', '-C', '/tmp/test_python_jqeyby0k/tmpd6l4oa61/python-build', '-j2']' returned non-zero exit status 2. Traceback (most recent call last): File "<string>", line 1, in <module> File "/tmp/tmpgc5zsmyt/cpython/Lib/sysconfig.py", line 740, in get_config_var return get_config_vars().get(name) ^^^^^^^^^^^^^^^^^ File "/tmp/tmpgc5zsmyt/cpython/Lib/sysconfig.py", line 723, in get_config_vars _init_config_vars() File "/tmp/tmpgc5zsmyt/cpython/Lib/sysconfig.py", line 670, in _init_config_vars _init_posix(_CONFIG_VARS) File "/tmp/tmpgc5zsmyt/cpython/Lib/sysconfig.py", line 536, in _init_posix _temp = __import__(name, globals(), locals(), ['build_time_vars'], 0) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ModuleNotFoundError: No module named '_sysconfigdata__linux_s390x-linux-gnu' Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto/build/Lib/test/test_tools/test_freeze.py", line 27, in test_freeze_simple_script outdir, scriptfile, python = helper.prepare(script, outdir) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto/build/Tools/freeze/test/freeze.py", line 180, in prepare _run_quiet([MAKE, '-C', builddir, parallel]) File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto/build/Tools/freeze/test/freeze.py", line 25, in _run_quiet return subprocess.run( ^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto/build/Lib/subprocess.py", line 571, in run raise CalledProcessError(retcode, process.args, subprocess.CalledProcessError: Command '['/usr/bin/make', '-C', '/tmp/tmpgc5zsmyt/python-build', '-j2']' returned non-zero exit status 2. Test report =========== Failed tests: - test_tools Failed subtests: - test_freeze_simple_script - test.test_tools.test_freeze.TestFreeze.test_freeze_simple_script Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora Rawhide LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/341/builds/2963 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-rawhide-z Build Reason: <unknown> Blamelist: Adam Turner <9087854+AA-Turner(a)users.noreply.github.com>, Alex Henrie <alexhenrie24(a)gmail.com>, Alex Waygood <Alex.Waygood(a)Gmail.com>, Alexey Namyotkin <62434915+nametkin(a)users.noreply.github.com>, Arjun <ccldarjun(a)icloud.com>, Arthur Pastel <arthur.pastel(a)gmail.com>, Barney Gale <barney.gale(a)gmail.com>, Barry Warsaw <barry(a)python.org>, Ben Kallus <49924171+kenballus(a)users.noreply.github.com>, Brandt Bucher <brandtbucher(a)microsoft.com>, Burak Saler <59198732+buraksaler(a)users.noreply.github.com>, Carey Metcalfe <carey(a)cmetcalfe.ca>, Carl Meyer <carl(a)oddbird.net>, Charles Machalow <csm10495(a)gmail.com>, Christopher Chavez <chrischavez(a)gmx.us>, David Foster <david(a)dafoster.net>, Dong-hee Na <donghee.na(a)python.org>, Eric Snow <ericsnowcurrently(a)gmail.com>, Erlend E. Aasland <erlend.aasland(a)protonmail.com>, Ethan Furman <ethan(a)stoneleaf.us>, Gleb Smirnoff <glebius(a)FreeBSD.org>, Gregory P. Smith <greg(a)krypto.org>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, Irit Katriel <1055913+iritkatriel(a)users.noreply.github.com>, Itamar Ostricher <itamarost(a)gmail.com>, Jacob Bower <1978924+jbower-fb(a)users.noreply.github.com>, Jakub Kulík <Kulikjak(a)gmail.com>, James Gerity <snoopjedi(a)gmail.com>, Jelle Zijlstra <jelle.zijlstra(a)gmail.com>, Jeong, YunWon <69878+youknowone(a)users.noreply.github.com>, John Belmonte <john(a)neggie.net>, JohnJamesUtley <81572567+JohnJamesUtley(a)users.noreply.github.com>, Jonathan Protzenko <protz(a)microsoft.com>, Juhi Chandalia <jkchandalia(a)gmail.com>, Jurica Bradarić <jbradaric(a)users.noreply.github.com>, Kevin Krakauer <kevinGC(a)users.noreply.github.com>, Kirill Podoprigora <kirill.bast9(a)mail.ru>, Kumar Aditya <59607654+kumaraditya303(a)users.noreply.github.com>, Lysandros Nikolaou <lisandrosnik(a)gmail.com>, Mark Shannon <mark(a)hotpy.org>, Michael Blahay <mblahay(a)users.noreply.github.com>, Nathaniel J. Smith <njs(a)pobox.com>, Ned Batchelder <ned(a)nedbatchelder.com>, Nikita Sobolev <mail(a)sobolevn.me>, Oleg Iarygin <oleg(a)arhadthedev.net>, Pablo G alindo Salgado <Pablogsal(a)gmail.com>, Paul Ganssle <1377457+pganssle(a)users.noreply.github.com>, Paul Ganssle <git(a)m.ganssle.io>, Petr Viktorin <encukou(a)gmail.com>, Prince Roshan <princekrroshan01(a)gmail.com>, Sam Carroll <70000253+samcarroll42(a)users.noreply.github.com>, Sam Morris <sam(a)robots.org.uk>, Sebastian Berg <sebastianb(a)nvidia.com>, Sebastian Pipping <sebastian(a)pipping.org>, Serhiy Storchaka <storchaka(a)gmail.com>, Shantanu <12621235+hauntsaninja(a)users.noreply.github.com>, Terry Jan Reedy <tjreedy(a)udel.edu>, Tian Gao <gaogaotiantian(a)hotmail.com>, Tim Hoffmann <2836374+timhoffm(a)users.noreply.github.com>, Tomas R <tomas.roun8(a)gmail.com>, Victor Stinner <vstinner(a)python.org>, Yuxin Wu <ppwwyyxxc(a)gmail.com>, Zhang Na <44800775+loongson-zn(a)users.noreply.github.com>, andrei kulakov <andrei.avk(a)gmail.com>, chgnrdv <52372310+chgnrdv(a)users.noreply.github.com>, penguin_wwy <940375606(a)qq.com>, samschott <sam.schott(a)outlook.com>, sunmy2019 <59365878+sunmy2019(a)users.noreply.github.com>, ym ki4360 <132453923+ymki4360(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Tests result: FAILURE then FAILURE == 442 tests OK. 10 slowest tests: - test_tools: 9 min 41 sec - test_concurrent_futures: 2 min 10 sec - test_multiprocessing_spawn: 1 min 28 sec - test_signal: 1 min 16 sec - test_multiprocessing_forkserver: 1 min 11 sec - test_multiprocessing_fork: 1 min 5 sec - test_socket: 42.8 sec - test_imaplib: 32.1 sec - test_io: 31.6 sec - test_subprocess: 29.1 sec 1 test failed: test_tools 20 tests skipped: test.test_asyncio.test_windows_events test.test_asyncio.test_windows_utils test_devpoll test_gdb test_ioctl test_kqueue test_launcher test_msilib test_nis test_peg_generator test_perf_profiler test_startfile test_tix test_tkinter test_ttk test_winconsoleio test_winreg test_winsound test_wmi test_zipfile64 2 re-run tests: test.test_asyncio.test_subprocess test_tools Total duration: 21 min 31 sec Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/test/test_tools/test_freeze.py", line 27, in test_freeze_simple_script outdir, scriptfile, python = helper.prepare(script, outdir) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 180, in prepare _run_quiet([MAKE, '-C', builddir, parallel]) File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 25, in _run_quiet return subprocess.run( ^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/subprocess.py", line 571, in run raise CalledProcessError(retcode, process.args, subprocess.CalledProcessError: Command '['/usr/bin/make', '-C', '/tmp/test_python_tjm2y_7c/tmpkp_nrt4a/python-build', '-j2']' returned non-zero exit status 2. Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/test/test_asyncio/test_subprocess.py", line 788, in test_subprocess_consistent_callbacks self.loop.run_until_complete(main()) File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/asyncio/base_events.py", line 664, in run_until_complete return future.result() ^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/test/test_asyncio/test_subprocess.py", line 780, in main self.assertEqual(events, [ AssertionError: Lists differ: ['process_exited', ('pipe_data_received', 1, b'stdout')] != [('pipe_data_received', 1, b'stdout'), ('p[95 chars]ted'] Traceback (most recent call last): File "<string>", line 1, in <module> File "/tmp/test_python_tjm2y_7c/tmpkp_nrt4a/cpython/Lib/sysconfig.py", line 740, in get_config_var return get_config_vars().get(name) ^^^^^^^^^^^^^^^^^ File "/tmp/test_python_tjm2y_7c/tmpkp_nrt4a/cpython/Lib/sysconfig.py", line 723, in get_config_vars _init_config_vars() File "/tmp/test_python_tjm2y_7c/tmpkp_nrt4a/cpython/Lib/sysconfig.py", line 670, in _init_config_vars _init_posix(_CONFIG_VARS) File "/tmp/test_python_tjm2y_7c/tmpkp_nrt4a/cpython/Lib/sysconfig.py", line 536, in _init_posix _temp = __import__(name, globals(), locals(), ['build_time_vars'], 0) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ModuleNotFoundError: No module named '_sysconfigdata__linux_s390x-linux-gnu' Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/test/test_tools/test_freeze.py", line 27, in test_freeze_simple_script outdir, scriptfile, python = helper.prepare(script, outdir) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 180, in prepare _run_quiet([MAKE, '-C', builddir, parallel]) File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 25, in _run_quiet return subprocess.run( ^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/subprocess.py", line 571, in run raise CalledProcessError(retcode, process.args, subprocess.CalledProcessError: Command '['/usr/bin/make', '-C', '/tmp/tmpct5jvmc1/python-build', '-j2']' returned non-zero exit status 2. Traceback (most recent call last): File "<string>", line 1, in <module> File "/tmp/tmpct5jvmc1/cpython/Lib/sysconfig.py", line 740, in get_config_var return get_config_vars().get(name) ^^^^^^^^^^^^^^^^^ File "/tmp/tmpct5jvmc1/cpython/Lib/sysconfig.py", line 723, in get_config_vars _init_config_vars() File "/tmp/tmpct5jvmc1/cpython/Lib/sysconfig.py", line 670, in _init_config_vars _init_posix(_CONFIG_VARS) File "/tmp/tmpct5jvmc1/cpython/Lib/sysconfig.py", line 536, in _init_posix _temp = __import__(name, globals(), locals(), ['build_time_vars'], 0) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ModuleNotFoundError: No module named '_sysconfigdata__linux_s390x-linux-gnu' Test report =========== Failed tests: - test.test_asyncio.test_subprocess - test_tools Failed subtests: - test_freeze_simple_script - test.test_tools.test_freeze.TestFreeze.test_freeze_simple_script - test_subprocess_consistent_callbacks - test.test_asyncio.test_subprocess.SubprocessThreadedWatcherTests.test_subprocess_consistent_callbacks Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora Rawhide Clang 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/566/builds/2874 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-rawhide-z Build Reason: <unknown> Blamelist: Charles Machalow <csm10495(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Tests result: FAILURE then FAILURE == 442 tests OK. 10 slowest tests: - test_concurrent_futures: 2 min 18 sec - test_multiprocessing_spawn: 1 min 48 sec - test_multiprocessing_forkserver: 1 min 20 sec - test_multiprocessing_fork: 1 min 11 sec - test_math: 1 min 10 sec - test_signal: 1 min 10 sec - test_capi: 51.2 sec - test_socket: 48.7 sec - test_tokenize: 43.6 sec - test_io: 35.5 sec 1 test failed: test_tools 20 tests skipped: test.test_asyncio.test_windows_events test.test_asyncio.test_windows_utils test_devpoll test_gdb test_ioctl test_kqueue test_launcher test_msilib test_nis test_peg_generator test_perf_profiler test_startfile test_tix test_tkinter test_ttk test_winconsoleio test_winreg test_winsound test_wmi test_zipfile64 2 re-run tests: test__xxsubinterpreters test_tools Total duration: 7 min 28 sec Captured traceback ================== Traceback (most recent call last): File "<string>", line 1, in <module> File "/tmp/tmpy466mgee/cpython/Lib/sysconfig.py", line 740, in get_config_var return get_config_vars().get(name) ^^^^^^^^^^^^^^^^^ File "/tmp/tmpy466mgee/cpython/Lib/sysconfig.py", line 723, in get_config_vars _init_config_vars() File "/tmp/tmpy466mgee/cpython/Lib/sysconfig.py", line 670, in _init_config_vars _init_posix(_CONFIG_VARS) File "/tmp/tmpy466mgee/cpython/Lib/sysconfig.py", line 536, in _init_posix _temp = __import__(name, globals(), locals(), ['build_time_vars'], 0) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ModuleNotFoundError: No module named '_sysconfigdata_d_linux_s390x-linux-gnu' Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang/build/Tools/freeze/freeze.py", line 489, in <module> main() File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang/build/Tools/freeze/freeze.py", line 387, in main files = makefreeze.makefreeze(base, dict, debug, custom_entry_point, ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang/build/Tools/freeze/makefreeze.py", line 52, in makefreeze writecode(outfp, mangled, str) File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang/build/Tools/freeze/makefreeze.py", line 83, in writecode print('%d,' % c, file=fp, end='') OSError: [Errno 28] No space left on device Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang/build/Lib/test/test_tools/test_freeze.py", line 28, in test_freeze_simple_script executable = helper.freeze(python, scriptfile, outdir) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang/build/Tools/freeze/test/freeze.py", line 197, in freeze _run_quiet([python, '-E', FREEZE, '-o', outdir, scriptfile], outdir) File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang/build/Tools/freeze/test/freeze.py", line 25, in _run_quiet return subprocess.run( ^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang/build/Lib/subprocess.py", line 571, in run raise CalledProcessError(retcode, process.args, subprocess.CalledProcessError: Command '['/tmp/tmpy466mgee/python-installation/bin/python3', '-E', '/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang/build/Tools/freeze/freeze.py', '-o', '/tmp/tmpy466mgee', '/tmp/tmpy466mgee/app.py']' returned non-zero exit status 1. Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang/build/Lib/test/test_tools/test_freeze.py", line 27, in test_freeze_simple_script outdir, scriptfile, python = helper.prepare(script, outdir) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang/build/Tools/freeze/test/freeze.py", line 146, in prepare copy_source_tree(srcdir, SRCDIR) File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang/build/Tools/freeze/test/freeze.py", line 95, in copy_source_tree shutil.copytree(oldroot, newroot, ignore=ignore_non_src) File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang/build/Lib/shutil.py", line 563, in copytree return _copytree(entries=entries, src=src, dst=dst, symlinks=symlinks, ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang/build/Lib/shutil.py", line 517, in _copytree raise Error(errors) shutil.Error: [('/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang/build/build/test_python_85440æ/test_python_worker_100707æ/@test_100707_tmpæ/dirA/linkC/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD', '/tmp/test_python_mofai7ye/tmpv166fbvo/cpython/build/test_python_85440æ/test_python_worker_100707æ/@test_100707_tmpæ/dirA/linkC/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD', "[Errno 40] Too many levels of symbolic links: '/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang/build/build/test_python_85440æ/test_python_worker_100707æ/@test_100707_tmpæ/dirA/linkC/linkD/link D/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD'"), ('/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang/build/build/test_python_85440æ/test_python_worker_100707æ/@test_100707_tmpæ/dirB/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD', '/tmp/test_python_mofai7ye/tmpv166fbvo/cpython/build/test_python_85440æ/test_python_worker_100707æ/@test_100707_tmpæ/dirB/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/ linkD', "[Errno 40] Too many levels of symbolic links: '/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang/build/build/test_python_85440æ/test_python_worker_100707æ/@test_100707_tmpæ/dirB/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD'"), ('/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang/build/build/test_python_85440æ/test_python_worker_100707æ/@test_100707_tmpæ/dirE', '/tmp/test_python_mofai7ye/tmpv166fbvo/cpython/build/test_python_85440æ/test_python_worker_100707æ/@test_100707_tmpæ/dirE', "[Errno 13] Permission denied: '/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang/build/build/test_python_85440æ/test_python_worker_100707æ/@test_100707_tmpæ/dirE'"), ('/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang/build/build/te st_python_85440æ/test_python_worker_100707æ/@test_100707_tmpæ/brokenLink', '/tmp/test_python_mofai7ye/tmpv166fbvo/cpython/build/test_python_85440æ/test_python_worker_100707æ/@test_100707_tmpæ/brokenLink', "[Errno 2] No such file or directory: '/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang/build/build/test_python_85440æ/test_python_worker_100707æ/@test_100707_tmpæ/brokenLink'"), ('/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang/build/build/test_python_85440æ/test_python_worker_100707æ/@test_100707_tmpæ/linkB/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD', '/tmp/test_python_mofai7ye/tmpv166fbvo/cpython/build/test_python_85440æ/test_python_worker_100707æ/@test_100707_tmpæ/linkB/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/link D/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/li kD/linkD/linkD/linkD', "[Errno 40] Too many levels of symbolic links: '/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang/build/build/test_python_85440æ/test_python_worker_100707æ/@test_100707_tmpæ/linkB/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD/linkD'"), ('/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang/build/build/test_python_85440æ/test_python_worker_100707æ/@test_100707_tmpæ/brokenLinkLoop', '/tmp/test_python_mofai7ye/tmpv166fbvo/cpython/build/test_python_85440æ/test_python_worker_100707æ/@test_100707_tmpæ/brokenLinkLoop', "[Errno 40] Too many levels of symbolic links: '/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang/build/build/test_python_85440æ/test_python_worker_100707æ/@test_100707_tmpæ/brokenLinkLoop'")] Test report =========== Failed tests: - test_tools Failed subtests: - test_freeze_simple_script - test.test_tools.test_freeze.TestFreeze.test_freeze_simple_script Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora Rawhide 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/538/builds/2885 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-rawhide-z Build Reason: <unknown> Blamelist: Charles Machalow <csm10495(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Tests result: FAILURE then FAILURE == 442 tests OK. 10 slowest tests: - test_tools: 3 min 34 sec - test_multiprocessing_spawn: 2 min 48 sec - test_math: 2 min 33 sec - test_concurrent_futures: 2 min 33 sec - test_multiprocessing_forkserver: 1 min 32 sec - test_multiprocessing_fork: 1 min 30 sec - test_tokenize: 1 min 14 sec - test_capi: 1 min 12 sec - test_signal: 1 min 3 sec - test_unparse: 59.7 sec 1 test failed: test_tools 20 tests skipped: test.test_asyncio.test_windows_events test.test_asyncio.test_windows_utils test_devpoll test_gdb test_ioctl test_kqueue test_launcher test_msilib test_nis test_peg_generator test_perf_profiler test_startfile test_tix test_tkinter test_ttk test_winconsoleio test_winreg test_winsound test_wmi test_zipfile64 1 re-run test: test_tools Total duration: 9 min 22 sec Captured traceback ================== Traceback (most recent call last): File "<string>", line 1, in <module> File "/tmp/test_python_n7qb5f7i/tmpki0vdk22/cpython/Lib/sysconfig.py", line 740, in get_config_var return get_config_vars().get(name) ^^^^^^^^^^^^^^^^^ File "/tmp/test_python_n7qb5f7i/tmpki0vdk22/cpython/Lib/sysconfig.py", line 723, in get_config_vars _init_config_vars() File "/tmp/test_python_n7qb5f7i/tmpki0vdk22/cpython/Lib/sysconfig.py", line 670, in _init_config_vars _init_posix(_CONFIG_VARS) File "/tmp/test_python_n7qb5f7i/tmpki0vdk22/cpython/Lib/sysconfig.py", line 536, in _init_posix _temp = __import__(name, globals(), locals(), ['build_time_vars'], 0) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ModuleNotFoundError: No module named '_sysconfigdata_d_linux_s390x-linux-gnu' Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z/build/Lib/test/test_tools/test_freeze.py", line 28, in test_freeze_simple_script executable = helper.freeze(python, scriptfile, outdir) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z/build/Tools/freeze/test/freeze.py", line 198, in freeze _run_quiet([MAKE, '-C', os.path.dirname(scriptfile)]) File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z/build/Tools/freeze/test/freeze.py", line 25, in _run_quiet return subprocess.run( ^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z/build/Lib/subprocess.py", line 571, in run raise CalledProcessError(retcode, process.args, subprocess.CalledProcessError: Command '['/usr/bin/make', '-C', '/tmp/tmp_kdmsc6k']' returned non-zero exit status 2. Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z/build/Lib/test/test_tools/test_freeze.py", line 28, in test_freeze_simple_script executable = helper.freeze(python, scriptfile, outdir) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z/build/Tools/freeze/test/freeze.py", line 198, in freeze _run_quiet([MAKE, '-C', os.path.dirname(scriptfile)]) File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z/build/Tools/freeze/test/freeze.py", line 25, in _run_quiet return subprocess.run( ^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z/build/Lib/subprocess.py", line 571, in run raise CalledProcessError(retcode, process.args, subprocess.CalledProcessError: Command '['/usr/bin/make', '-C', '/tmp/test_python_n7qb5f7i/tmpki0vdk22']' returned non-zero exit status 2. Traceback (most recent call last): File "<string>", line 1, in <module> File "/tmp/tmp_kdmsc6k/cpython/Lib/sysconfig.py", line 740, in get_config_var return get_config_vars().get(name) ^^^^^^^^^^^^^^^^^ File "/tmp/tmp_kdmsc6k/cpython/Lib/sysconfig.py", line 723, in get_config_vars _init_config_vars() File "/tmp/tmp_kdmsc6k/cpython/Lib/sysconfig.py", line 670, in _init_config_vars _init_posix(_CONFIG_VARS) File "/tmp/tmp_kdmsc6k/cpython/Lib/sysconfig.py", line 536, in _init_posix _temp = __import__(name, globals(), locals(), ['build_time_vars'], 0) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ModuleNotFoundError: No module named '_sysconfigdata_d_linux_s390x-linux-gnu' Test report =========== Failed tests: - test_tools Failed subtests: - test_freeze_simple_script - test.test_tools.test_freeze.TestFreeze.test_freeze_simple_script Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) uploading test-results.xml (failure) (main)
by buildbot＠python.org 13 May '23

13 May '23

The Buildbot has detected a new failure on builder AMD64 Debian root 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/345/builds/4775 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: angelico-debian-amd64 Build Reason: <unknown> Blamelist: Alex Waygood <Alex.Waygood(a)Gmail.com>, Ned Batchelder <ned(a)nedbatchelder.com>, Terry Jan Reedy <tjreedy(a)udel.edu> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 5, done. remote: Counting objects: 20% (1/5) remote: Counting objects: 40% (2/5) remote: Counting objects: 60% (3/5) remote: Counting objects: 80% (4/5) remote: Counting objects: 100% (5/5) remote: Counting objects: 100% (5/5), done. remote: Compressing objects: 20% (1/5) remote: Compressing objects: 40% (2/5) remote: Compressing objects: 60% (3/5) remote: Compressing objects: 80% (4/5) remote: Compressing objects: 100% (5/5) remote: Compressing objects: 100% (5/5), done. remote: Total 5 (delta 0), reused 1 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to '46f1c78eebe08e96ed29d364b1804dd37364831d'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 46f1c78eeb gh-75710: IDLE - add docstrings and comments to editor module (#104446) Switched to and reset branch 'main' configure: WARNING: pkg-config is missing. Some dependencies may not be detected correctly. Fatal Python error: drop_gil: PyMUTEX_LOCK(gil->switch_mutex) failed Python runtime state: initialized Thread 0x00007f8452ee1280 (most recent call first): File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/test__xxsubinterpreters.py", line 80 in clean_up_interpreters File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/test__xxsubinterpreters.py", line 88 in tearDown File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/case.py", line 594 in _callTearDown File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/case.py", line 637 in run File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/case.py", line 690 in __call__ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/suite.py", line 122 in run File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/suite.py", line 84 in __call__ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/suite.py", line 122 in run File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/suite.py", line 84 in __call__ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/suite.py", line 122 in run File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/suite.py", line 84 in __call__ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/runner.py", line 240 in run File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/support/__init__.py", line 1106 in _run_suite File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/support/__init__.py", line 1232 in run_unittest File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/libregrtest/runtest.py", line 294 in _test_module File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/libregrtest/runtest.py", line 330 in _runtest_inner2 File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/libregrtest/runtest.py", line 373 in _runtest_inner File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/libregrtest/runtest.py", line 248 in _runtest File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/libregrtest/runtest.py", line 278 in runtest File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/libregrtest/main.py", line 783 in _main File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/libregrtest/main.py", line 738 in main File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/libregrtest/main.py", line 802 in main File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/__main__.py", line 2 in <module> File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/runpy.py", line 88 in _run_code File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/runpy.py", line 198 in _run_module_as_main Fatal Python error: Aborted Thread 0x00007f8452ee1280 (most recent call first): File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/test__xxsubinterpreters.py", line 80 in clean_up_interpreters File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/test__xxsubinterpreters.py", line 88 in tearDown File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/case.py", line 594 in _callTearDown File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/case.py", line 637 in run File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/case.py", line 690 in __call__ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/suite.py", line 122 in run File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/suite.py", line 84 in __call__ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/suite.py", line 122 in run File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/suite.py", line 84 in __call__ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/suite.py", line 122 in run File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/suite.py", line 84 in __call__ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/runner.py", line 240 in run File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/support/__init__.py", line 1106 in _run_suite File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/support/__init__.py", line 1232 in run_unittest File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/libregrtest/runtest.py", line 294 in _test_module File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/libregrtest/runtest.py", line 330 in _runtest_inner2 File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/libregrtest/runtest.py", line 373 in _runtest_inner File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/libregrtest/runtest.py", line 248 in _runtest File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/libregrtest/runtest.py", line 278 in runtest File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/libregrtest/main.py", line 783 in _main File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/libregrtest/main.py", line 738 in main File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/libregrtest/main.py", line 802 in main File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/__main__.py", line 2 in <module> File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/runpy.py", line 88 in _run_code File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/runpy.py", line 198 in _run_module_as_main Extension modules: _testcapi, _xxsubinterpreters (total: 2) Aborted make: *** [Makefile:1956: buildbottest] Error 134 Cannot open file '/root/buildarea/3.x.angelico-debian-amd64/build/test-results.xml' for upload Test report =========== Failed tests: - test__xxsubinterpreters - test_threading Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x RHEL8 LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/442/builds/4165 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-rhel8-z Build Reason: <unknown> Blamelist: Alex Waygood <Alex.Waygood(a)Gmail.com>, Ned Batchelder <ned(a)nedbatchelder.com>, Terry Jan Reedy <tjreedy(a)udel.edu> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Tests result: FAILURE then FAILURE == 442 tests OK. 10 slowest tests: - test_tools: 14 min 55 sec - test_concurrent_futures: 2 min 13 sec - test_multiprocessing_spawn: 1 min 27 sec - test_signal: 1 min 23 sec - test_multiprocessing_forkserver: 1 min 9 sec - test_multiprocessing_fork: 1 min 2 sec - test_io: 34.6 sec - test_imaplib: 32.2 sec - test_socket: 32.1 sec - test_faulthandler: 28.0 sec 1 test failed: test.test_asyncio.test_subprocess 20 tests skipped: test.test_asyncio.test_windows_events test.test_asyncio.test_windows_utils test_devpoll test_gdb test_ioctl test_kqueue test_launcher test_msilib test_nis test_peg_generator test_perf_profiler test_startfile test_tix test_tkinter test_ttk test_winconsoleio test_winreg test_winsound test_wmi test_zipfile64 1 re-run test: test.test_asyncio.test_subprocess Total duration: 17 min 57 sec Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/test_asyncio/test_subprocess.py", line 788, in test_subprocess_consistent_callbacks self.loop.run_until_complete(main()) File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/asyncio/base_events.py", line 664, in run_until_complete return future.result() ^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/test_asyncio/test_subprocess.py", line 780, in main self.assertEqual(events, [ AssertionError: Lists differ: [('pi[29 chars]t'), 'process_exited'] != [('pi[29 chars]t'), ('pipe_data_received', 2, b'stderr'), 'pi[57 chars]ted'] Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/multiprocessing/resource_tracker.py", line 209, in main cache[rtype].remove(name) KeyError: '/psm_182c68de' Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/test_asyncio/test_subprocess.py", line 788, in test_subprocess_consistent_callbacks self.loop.run_until_complete(main()) File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/asyncio/base_events.py", line 664, in run_until_complete return future.result() ^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/test_asyncio/test_subprocess.py", line 780, in main self.assertEqual(events, [ AssertionError: Lists differ: [('pi[69 chars]), 'process_exited', 'pipe_connection_lost', '[17 chars]ost'] != [('pi[69 chars]), 'pipe_connection_lost', 'pipe_connection_lo[17 chars]ted'] Test report =========== Failed tests: - test.test_asyncio.test_subprocess Failed subtests: - test_subprocess_consistent_callbacks - test.test_asyncio.test_subprocess.SubprocessThreadedWatcherTests.test_subprocess_consistent_callbacks - test_subprocess_consistent_callbacks - test.test_asyncio.test_subprocess.SubprocessFastWatcherTests.test_subprocess_consistent_callbacks Sincerely, -The Buildbot

1 0