Mailman 3 June 2023 - Buildbot-status

☠ Buildbot (Python): python/cpython - failed test (failure) uploading test-results.xml (failure) (3.12)
by buildbot＠python.org June 9, 2023

June 9, 2023

The Buildbot has detected a new failure on builder AMD64 Arch Linux TraceRefs 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1197/builds/58 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: pablogsal-arch-x86_64 Build Reason: <unknown> Blamelist: Victor Stinner <vstinner(a)python.org> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 7, done. remote: Counting objects: 14% (1/7) remote: Counting objects: 28% (2/7) remote: Counting objects: 42% (3/7) remote: Counting objects: 57% (4/7) remote: Counting objects: 71% (5/7) remote: Counting objects: 85% (6/7) remote: Counting objects: 100% (7/7) remote: Counting objects: 100% (7/7), done. remote: Compressing objects: 50% (1/2) remote: Compressing objects: 100% (2/2) remote: Compressing objects: 100% (2/2), done. remote: Total 7 (delta 5), reused 6 (delta 5), pack-reused 0 From https://github.com/python/cpython * branch 3.12 -> FETCH_HEAD Note: switching to 'd29e86bea3bcd7a8379d8368b36c718ab7b5b3f3'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at d29e86bea3 [3.12] gh-102304: Fix Py_INCREF() for limited C API 3.9 (#105553) Switched to and reset branch '3.12' Objects/object.c:2211: _Py_ForgetReference: Assertion failed: invalid object chain Enable tracemalloc to get the memory block allocation traceback object address : 0x7f6bf962d300 object refcount : 0 object type : 0x55a320cd18c0 object type name: bytes object repr : <refcnt 0 at 0x7f6bf962d300> Fatal Python error: _PyObject_AssertFailed: _PyObject_AssertFailed Python runtime state: initialized Current thread 0x00007f6c09e2e740 (most recent call first): <no Python frame> Debug memory block at address p=0x7f6c09d55e90: API '�' 18302063728033398269 bytes originally requested The 7 pad bytes at p-7 are not all FORBIDDENBYTE (0xfd): at p-7: 0xdd *** OUCH at p-6: 0xdd *** OUCH at p-5: 0xdd *** OUCH at p-4: 0xdd *** OUCH at p-3: 0xdd *** OUCH at p-2: 0xdd *** OUCH at p-1: 0xdd *** OUCH Because memory is corrupted at the start, the count of bytes requested may be bogus, and checking the trailing pad bytes may segfault. The 8 pad bytes at tail=0xfdfe7d6a07d35c8d are Fatal Python error: Segmentation fault Current thread 0x00007f6c09e2e740 (most recent call first): <no Python frame> Extension modules: _testcapi, _xxsubinterpreters, _xxinterpchannels (total: 3) make: *** [Makefile:2015: buildbottest] Segmentation fault (core dumped) Cannot open file '/buildbot/buildarea/3.12.pablogsal-arch-x86_64/build/test-results.xml' for upload Test report =========== Failed tests: - test__xxsubinterpreters - test__xxinterpchannels Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) uploading test-results.xml (failure) (3.11)
by buildbot＠python.org June 9, 2023

June 9, 2023

The Buildbot has detected a new failure on builder PPC64LE RHEL8 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/997/builds/729 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-ppc64le Build Reason: <unknown> Blamelist: Alex Waygood <Alex.Waygood(a)Gmail.com>, Erlend E. Aasland <erlend.aasland(a)protonmail.com>, Federico Caselli <CaselIT(a)users.noreply.github.com>, Jelle Zijlstra <jelle.zijlstra(a)gmail.com>, Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com>, Pablo Galindo <pablogsal(a)gmail.com> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 19, done. remote: Counting objects: 5% (1/19) remote: Counting objects: 10% (2/19) remote: Counting objects: 15% (3/19) remote: Counting objects: 21% (4/19) remote: Counting objects: 26% (5/19) remote: Counting objects: 31% (6/19) remote: Counting objects: 36% (7/19) remote: Counting objects: 42% (8/19) remote: Counting objects: 47% (9/19) remote: Counting objects: 52% (10/19) remote: Counting objects: 57% (11/19) remote: Counting objects: 63% (12/19) remote: Counting objects: 68% (13/19) remote: Counting objects: 73% (14/19) remote: Counting objects: 78% (15/19) remote: Counting objects: 84% (16/19) remote: Counting objects: 89% (17/19) remote: Counting objects: 94% (18/19) remote: Counting objects: 100% (19/19) remote: Counting objects: 100% (19/19), done. remote: Compressing objects: 5% (1/18) remote: Compressing objects: 11% (2/18) remote: Compressing objects: 16% (3/18) remote: Compressing objects: 22% (4/18) remote: Compressing objects: 27% (5/18) remote: Compressing objects: 33% (6/18) remote: Compressing objects: 38% (7/18) remote: Compressing objects: 44% (8/18) remote: Compressing objects: 50% (9/18) remote: Compressing objects: 55% (10/18) remote: Compressing objects: 61% (11/18) remote: Compressing objects: 66% (12/18) remote: Compressing objects: 72% (13/18) remote: Compressing objects: 77% (14/18) remote: Compressing objects: 83% (15/18) remote: Compressing objects: 88% (16/18) remote: Compressing objects: 94% (17/18) remote: Compressing objects: 100% (18/18) remote: Compressing objects: 100% (18/18), done. remote: Total 19 (delta 1), reused 8 (delta 1), pack-reused 0 From https://github.com/python/cpython * branch 3.11 -> FETCH_HEAD Note: switching to 'fed1b5a198c20b4b94a594248c88b3bcac9937eb'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at fed1b5a198 [3.11] gh-105332: [Enum] Fix unpickling flags in edge-cases (GH-105348) (GH-105519) Switched to and reset branch '3.11' renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11 renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11 renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11 renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11 renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11 renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11 renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11 renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11 renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11 Timeout (0:15:00)! Thread 0x00007fff98384d40 (most recent call first): File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/selectors.py", line 415 in select File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/subprocess.py", line 2108 in _communicate File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/subprocess.py", line 1209 in communicate File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/test/test_gdb.py", line 112 in run_gdb File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/test/test_gdb.py", line 229 in get_stack_trace File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/test/test_gdb.py", line 859 in test_threads File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/unittest/case.py", line 579 in _callTestMethod File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/unittest/case.py", line 623 in run File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/unittest/case.py", line 678 in __call__ File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/unittest/suite.py", line 122 in run File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/unittest/suite.py", line 122 in run File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/unittest/suite.py", line 122 in run File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/unittest/runner.py", line 217 in run File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/test/support/__init__.py", line 1095 in _run_suite File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/test/support/__init__.py", line 1221 in run_unittest File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/test/libregrtest/runtest.py", line 276 in _test_module File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/test/libregrtest/runtest.py", line 312 in _runtest_inner2 File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/test/libregrtest/runtest.py", line 355 in _runtest_inner File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/test/libregrtest/runtest.py", line 230 in _runtest File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/test/libregrtest/runtest.py", line 260 in runtest File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/test/libregrtest/main.py", line 364 in rerun_failed_tests File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/test/libregrtest/main.py", line 778 in _main File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/test/libregrtest/main.py", line 733 in main File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/test/libregrtest/main.py", line 795 in main File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/test/__main__.py", line 2 in <module> File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/runpy.py", line 88 in _run_code File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/Lib/runpy.py", line 198 in _run_module_as_main make: *** [Makefile:1847: buildbottest] Error 1 Cannot open file '/home/buildbot/buildarea/3.11.cstratak-RHEL8-ppc64le/build/build_oot/test-results.xml' for upload Test report =========== Failed tests: - test_gdb Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) (3.12)
by buildbot＠python.org June 9, 2023

June 9, 2023

The Buildbot has detected a new failure on builder PPC64LE RHEL7 LTO 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1205/builds/40 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL7-ppc64le Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Tests result: FAILURE then ENV CHANGED == 441 tests OK. 10 slowest tests: - test_concurrent_futures: 2 min 49 sec - test_multiprocessing_spawn: 2 min 49 sec - test_math: 2 min 45 sec - test_hashlib: 1 min 42 sec - test_cppext: 1 min 35 sec - test_tarfile: 1 min 34 sec - test_multiprocessing_forkserver: 1 min 33 sec - test_multiprocessing_fork: 1 min 15 sec - test_unparse: 1 min 5 sec - test_lib2to3: 1 min 2 sec 1 test altered the execution environment: test_concurrent_futures 25 tests skipped: test.test_asyncio.test_windows_events test.test_asyncio.test_windows_utils test_devpoll test_gdb test_idle test_ioctl test_kqueue test_launcher test_msilib test_peg_generator test_perf_profiler test_smtpnet test_ssl test_startfile test_tcl test_tix test_tkinter test_ttk test_ttk_textonly test_turtle test_winconsoleio test_winreg test_winsound test_wmi test_zipfile64 1 re-run test: test_socket Total duration: 16 min 58 sec Captured traceback ================== remote: Enumerating objects: 37, done. remote: Counting objects: 2% (1/37) remote: Counting objects: 5% (2/37) remote: Counting objects: 8% (3/37) remote: Counting objects: 10% (4/37) remote: Counting objects: 13% (5/37) remote: Counting objects: 16% (6/37) remote: Counting objects: 18% (7/37) remote: Counting objects: 21% (8/37) remote: Counting objects: 24% (9/37) remote: Counting objects: 27% (10/37) remote: Counting objects: 29% (11/37) remote: Counting objects: 32% (12/37) remote: Counting objects: 35% (13/37) remote: Counting objects: 37% (14/37) remote: Counting objects: 40% (15/37) remote: Counting objects: 43% (16/37) remote: Counting objects: 45% (17/37) remote: Counting objects: 48% (18/37) remote: Counting objects: 51% (19/37) remote: Counting objects: 54% (20/37) remote: Counting objects: 56% (21/37) remote: Counting objects: 59% (22/37) remote: Counting objects: 62% (23/37) remote: Counting objects: 64% (24/37) remote: Counting objects: 67% (25/37) remote: Counting objects: 70% (26/37) remote: Counting objects: 72% (27/37) remote: Counting objects: 75% (28/37) remote: Counting objects: 78% (29/37) remote: Counting objects: 81% (30/37) remote: Counting objects: 83% (31/37) remote: Counting objects: 86% (32/37) remote: Counting objects: 89% (33/37) remote: Counting objects: 91% (34/37) remote: Counting objects: 94% (35/37) remote: Counting objects: 97% (36/37) remote: Counting objects: 100% (37/37) remote: Counting objects: 100% (37/37), done. remote: Compressing objects: 4% (1/23) remote: Compressing objects: 8% (2/23) remote: Compressing objects: 13% (3/23) remote: Compressing objects: 17% (4/23) remote: Compressing objects: 21% (5/23) remote: Compressing objects: 26% (6/23) remote: Compressing objects: 30% (7/23) remote: Compressing objects: 34% (8/23) remote: Compressing objects: 39% (9/23) remote: Compressing objects: 43% (10/23) remote: Compressing objects: 47% (11/23) remote: Compressing objects: 52% (12/23) remote: Compressing objects: 56% (13/23) remote: Compressing objects: 60% (14/23) remote: Compressing objects: 65% (15/23) remote: Compressing objects: 69% (16/23) remote: Compressing objects: 73% (17/23) remote: Compressing objects: 78% (18/23) remote: Compressing objects: 82% (19/23) remote: Compressing objects: 86% (20/23) remote: Compressing objects: 91% (21/23) remote: Compressing objects: 95% (22/23) remote: Compressing objects: 100% (23/23) remote: Compressing objects: 100% (23/23), done. remote: Total 37 (delta 14), reused 29 (delta 14), pack-reused 0 From https://github.com/python/cpython * branch 3.12 -> FETCH_HEAD Note: checking out '2f4a2d6c1b0c95f6be33a8c778b0212922a50530'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by performing another checkout. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -b with the checkout command again. Example: git checkout -b new_branch_name HEAD is now at 2f4a2d6... [3.12] gh-105332: [Enum] Fix unpickling flags in edge-cases (GH-105348) (GH-105520) Switched to and reset branch '3.12' make: *** [Makefile:2009: buildbottest] Error 3 Test report =========== Failed tests: - test_socket Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder PPC64 Fedora 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1202/builds/82 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-ppc64 Build Reason: <unknown> Blamelist: Alex Waygood <Alex.Waygood(a)Gmail.com>, Barney Gale <barney.gale(a)gmail.com>, Eric Snow <ericsnowcurrently(a)gmail.com>, Erlend E. Aasland <erlend.aasland(a)protonmail.com>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com>, Thomas Wouters <thomas(a)python.org>, Victor Stinner <vstinner(a)python.org> BUILD FAILED: failed compile (failure) Summary of the results of the build (if available): =================================================== Captured traceback ================== remote: Enumerating objects: 81, done.[K remote: Counting objects: 1% (1/80)[K remote: Counting objects: 2% (2/80)[K remote: Counting objects: 3% (3/80)[K remote: Counting objects: 5% (4/80)[K remote: Counting objects: 6% (5/80)[K remote: Counting objects: 7% (6/80)[K remote: Counting objects: 8% (7/80)[K remote: Counting objects: 10% (8/80)[K remote: Counting objects: 11% (9/80)[K remote: Counting objects: 12% (10/80)[K remote: Counting objects: 13% (11/80)[K remote: Counting objects: 15% (12/80)[K remote: Counting objects: 16% (13/80)[K remote: Counting objects: 17% (14/80)[K remote: Counting objects: 18% (15/80)[K remote: Counting objects: 20% (16/80)[K remote: Counting objects: 21% (17/80)[K remote: Counting objects: 22% (18/80)[K remote: Counting objects: 23% (19/80)[K remote: Counting objects: 25% (20/80)[K remote: Counting objects: 26% (21/80)[K remote: Counting objects: 27% (22/80)[K remote: Counting objects: 28% (23/80)[K remote: Counting objects: 30% (24/80)[K remote: Counting objects: 31% (25/80)[K remote: Counting objects: 32% (26/80)[K remote: Counting objects: 33% (27/80)[K remote: Counting objects: 35% (28/80)[K remote: Counting objects: 36% (29/80)[K remote: Counting objects: 37% (30/80)[K remote: Counting objects: 38% (31/80)[K remote: Counting objects: 40% (32/80)[K remote: Counting objects: 41% (33/80)[K remote: Counting objects: 42% (34/80)[K remote: Counting objects: 43% (35/80)[K remote: Counting objects: 45% (36/80)[K remote: Counting objects: 46% (37/80)[K remote: Counting objects: 47% (38/80)[K remote: Counting objects: 48% (39/80)[K remote: Counting objects: 50% (40/80)[K remote: Counting objects: 51% (41/80)[K remote: Counting objects: 52% (42/80)[K remote: Counting objects: 53% (43/80)[K remote: Counting objects: 55% (44/80)[K remote: Counting objects: 56% (45/80)[K remote: Counting objects: 57% (46/80)[K remote: Counting objects: 58% (47/80)[K remote: Counting objects: 60% (48/80)[K remote: Counting objects: 61% (49/80)[K remote: Counting objects: 62% (50/80)[K remote: Counting objects: 63% (51/80)[K remote: Counting objects: 65% (52/80)[K remote: Counting objects: 66% (53/80)[K remote: Counting objects: 67% (54/80)[K remote: Counting objects: 68% (55/80)[K remote: Counting objects: 70% (56/80)[K remote: Counting objects: 71% (57/80)[K remote: Counting objects: 72% (58/80)[K remote: Counting objects: 73% (59/80)[K remote: Counting objects: 75% (60/80)[K remote: Counting objects: 76% (61/80)[K remote: Counting objects: 77% (62/80)[K remote: Counting objects: 78% (63/80)[K remote: Counting objects: 80% (64/80)[K remote: Counting objects: 81% (65/80)[K remote: Counting objects: 82% (66/80)[K remote: Counting objects: 83% (67/80)[K remote: Counting objects: 85% (68/80)[K remote: Counting objects: 86% (69/80)[K remote: Counting objects: 87% (70/80)[K remote: Counting objects: 88% (71/80)[K remote: Counting objects: 90% (72/80)[K remote: Counting objects: 91% (73/80)[K remote: Counting objects: 92% (74/80)[K remote: Counting objects: 93% (75/80)[K remote: Counting objects: 95% (76/80)[K remote: Counting objects: 96% (77/80)[K remote: Counting objects: 97% (78/80)[K remote: Counting objects: 98% (79/80)[K remote: Counting objects: 100% (80/80)[K remote: Counting objects: 100% (80/80), done.[K remote: Compressing objects: 1% (1/51)[K remote: Compressing objects: 3% (2/51)[K remote: Compressing objects: 5% (3/51)[K remote: Compressing objects: 7% (4/51)[K remote: Compressing objects: 9% (5/51)[K remote: Compressing objects: 11% (6/51)[K remote: Compressing objects: 13% (7/51)[K remote: Compressing objects: 15% (8/51)[K remote: Compressing objects: 17% (9/51)[K remote: Compressing objects: 19% (10/51)[K remote: Compressing objects: 21% (11/51)[K remote: Compressing objects: 23% (12/51)[K remote: Compressing objects: 25% (13/51)[K remote: Compressing objects: 27% (14/51)[K remote: Compressing objects: 29% (15/51)[K remote: Compressing objects: 31% (16/51)[K remote: Compressing objects: 33% (17/51)[K remote: Compressing objects: 35% (18/51)[K remote: Compressing objects: 37% (19/51)[K remote: Compressing objects: 39% (20/51)[K remote: Compressing objects: 41% (21/51)[K remote: Compressing objects: 43% (22/51)[K remote: Compressing objects: 45% (23/51)[K remote: Compressing objects: 47% (24/51)[K remote: Compressing objects: 49% (25/51)[K remote: Compressing objects: 50% (26/51)[K remote: Compressing objects: 52% (27/51)[K remote: Compressing objects: 54% (28/51)[K remote: Compressing objects: 56% (29/51)[K remote: Compressing objects: 58% (30/51)[K remote: Compressing objects: 60% (31/51)[K remote: Compressing objects: 62% (32/51)[K remote: Compressing objects: 64% (33/51)[K remote: Compressing objects: 66% (34/51)[K remote: Compressing objects: 68% (35/51)[K remote: Compressing objects: 70% (36/51)[K remote: Compressing objects: 72% (37/51)[K remote: Compressing objects: 74% (38/51)[K remote: Compressing objects: 76% (39/51)[K remote: Compressing objects: 78% (40/51)[K remote: Compressing objects: 80% (41/51)[K remote: Compressing objects: 82% (42/51)[K remote: Compressing objects: 84% (43/51)[K remote: Compressing objects: 86% (44/51)[K remote: Compressing objects: 88% (45/51)[K remote: Compressing objects: 90% (46/51)[K remote: Compressing objects: 92% (47/51)[K remote: Compressing objects: 94% (48/51)[K remote: Compressing objects: 96% (49/51)[K remote: Compressing objects: 98% (50/51)[K remote: Compressing objects: 100% (51/51)[K remote: Compressing objects: 100% (51/51), done.[K remote: Total 81 (delta 35), reused 56 (delta 29), pack-reused 1[K From https://github.com/python/cpython * branch 3.12 -> FETCH_HEAD Note: checking out '2f4a2d6c1b0c95f6be33a8c778b0212922a50530'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by performing another checkout. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -b with the checkout command again. Example: git checkout -b new_branch_name HEAD is now at 2f4a2d6... [3.12] gh-105332: [Enum] Fix unpickling flags in edge-cases (GH-105348) (GH-105520) Switched to and reset branch '3.12' configure: WARNING: powerpc64-unknown-linux-gnu/gcc is not supported configure: WARNING: Platform "powerpc64-unknown-linux-gnu" with compiler "gcc" is not supported by the CPython core team, see https://peps.python.org/pep-0011/ for more information. ../Objects/unicodeobject.c: In function ‘unicode_endswith’: ../Objects/unicodeobject.c:12892:23: warning: ‘subobj’ may be used uninitialized in this function [-Wmaybe-uninitialized] substring = PyTuple_GET_ITEM(subobj, i); ^ ../Objects/unicodeobject.c: In function ‘unicode_startswith’: ../Objects/unicodeobject.c:12838:23: warning: ‘subobj’ may be used uninitialized in this function [-Wmaybe-uninitialized] substring = PyTuple_GET_ITEM(subobj, i); ^ In file included from ../Include/internal/pycore_opcode.h:13:0, from ../Python/ceval.c:16: ../Python/ceval.c: In function ‘lltrace_instruction’: ../Python/ceval.c:141:17: warning: comparison is always false due to limited range of data type [-Wtype-limits] if (HAS_ARG((int)_PyOpcode_Deopt[opcode])) { ^ ../Include/opcode.h:266:33: note: in definition of macro ‘IS_PSEUDO_OPCODE’ #define IS_PSEUDO_OPCODE(op) (((op) >= MIN_PSEUDO_OPCODE) && ((op) <= MAX_PSEUDO_OPCODE)) ^ ../Python/ceval.c:141:9: note: in expansion of macro ‘HAS_ARG’ if (HAS_ARG((int)_PyOpcode_Deopt[opcode])) { ^ ../Python/ceval.c:141:17: warning: comparison is always false due to limited range of data type [-Wtype-limits] if (HAS_ARG((int)_PyOpcode_Deopt[opcode])) { ^ ../Include/opcode.h:221:10: note: in definition of macro ‘HAS_ARG’ || ((op) == JUMP) \ ^ ../Python/ceval.c:141:17: warning: comparison is always false due to limited range of data type [-Wtype-limits] if (HAS_ARG((int)_PyOpcode_Deopt[opcode])) { ^ ../Include/opcode.h:222:10: note: in definition of macro ‘HAS_ARG’ || ((op) == JUMP_NO_INTERRUPT) \ ^ ../Python/ceval.c:141:17: warning: comparison is always false due to limited range of data type [-Wtype-limits] if (HAS_ARG((int)_PyOpcode_Deopt[opcode])) { ^ ../Include/opcode.h:223:10: note: in definition of macro ‘HAS_ARG’ || ((op) == LOAD_METHOD) \ ^ ../Python/ceval.c:141:17: warning: comparison is always false due to limited range of data type [-Wtype-limits] if (HAS_ARG((int)_PyOpcode_Deopt[opcode])) { ^ ../Include/opcode.h:224:10: note: in definition of macro ‘HAS_ARG’ || ((op) == LOAD_SUPER_METHOD) \ ^ ../Python/ceval.c:141:17: warning: comparison is always false due to limited range of data type [-Wtype-limits] if (HAS_ARG((int)_PyOpcode_Deopt[opcode])) { ^ ../Include/opcode.h:225:10: note: in definition of macro ‘HAS_ARG’ || ((op) == LOAD_ZERO_SUPER_METHOD) \ ^ ../Python/ceval.c:141:17: warning: comparison is always false due to limited range of data type [-Wtype-limits] if (HAS_ARG((int)_PyOpcode_Deopt[opcode])) { ^ ../Include/opcode.h:226:10: note: in definition of macro ‘HAS_ARG’ || ((op) == LOAD_ZERO_SUPER_ATTR) \ ^ ../Python/ceval.c:141:17: warning: comparison is always false due to limited range of data type [-Wtype-limits] if (HAS_ARG((int)_PyOpcode_Deopt[opcode])) { ^ ../Include/opcode.h:227:10: note: in definition of macro ‘HAS_ARG’ || ((op) == STORE_FAST_MAYBE_NULL) \ ^ ../Python/instrumentation.c: In function ‘allocate_instrumentation_data’: ../Python/instrumentation.c:1415:9: warning: missing braces around initializer [-Wmissing-braces] code->_co_monitoring->local_monitors = (_Py_Monitors){ 0 }; ^ ../Python/instrumentation.c:1415:9: warning: (near initialization for ‘(anonymous).tools’) [-Wmissing-braces] ../Python/instrumentation.c:1416:9: warning: missing braces around initializer [-Wmissing-braces] code->_co_monitoring->active_monitors = (_Py_Monitors){ 0 }; ^ ../Python/instrumentation.c:1416:9: warning: (near initialization for ‘(anonymous).tools’) [-Wmissing-braces] /usr/bin/ld: final link failed: No space left on device collect2: error: ld returned 1 exit status make: *** [Modules/_datetime.cpython-312d-powerpc64-linux-gnu.so] Error 1 Test report =========== Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) uploading test-results.xml (failure) (main)
by buildbot＠python.org June 9, 2023

June 9, 2023

The Buildbot has detected a new failure on builder s390x Fedora LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/545/builds/3943 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-z Build Reason: <unknown> Blamelist: Alex Waygood <Alex.Waygood(a)Gmail.com>, Artem Mukhin <artem.m.mukhin(a)gmail.com>, Bar Harel <bharel(a)barharel.com>, Barney Gale <barney.gale(a)gmail.com>, Brett Cannon <brett(a)python.org>, Carl Meyer <carl(a)oddbird.net>, Christopher Chavez <chrischavez(a)gmx.us>, Dong-hee Na <donghee.na(a)python.org>, Eric Snow <ericsnowcurrently(a)gmail.com>, Erlend E. Aasland <erlend.aasland(a)protonmail.com>, Gabriele N. Tornetta <P403n1x87(a)users.noreply.github.com>, Gregory P. Smith <greg(a)krypto.org>, Guido van Rossum <guido(a)python.org>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, Inada Naoki <songofacandy(a)gmail.com>, Irit Katriel <1055913+iritkatriel(a)users.noreply.github.com>, Jakub Kuczys <me(a)jacken.men>, Jeffery To <jeffery.to(a)gmail.com>, Jelle Zijlstra <jelle.zijlstra(a)gmail.com>, Joe Geisbauer <joegeisbauer(a)gmail.com>, Kirill Podoprigora <kirill.bast9(a)mail.ru>, Lysandros Nikolaou <lisandrosnik(a)gmail.com>, Mark Shannon <mark(a)hotpy.org>, Ned Deily <nad(a)python.org>, Nikita Sobolev <mail@sob olevn.me>, Pablo Galindo Salgado <Pablogsal(a)gmail.com>, Petr Viktorin <encukou(a)gmail.com>, Raymond Hettinger <rhettinger(a)users.noreply.github.com>, Shantanu <12621235+hauntsaninja(a)users.noreply.github.com>, Steve Dower <steve.dower(a)python.org>, Terry Jan Reedy <tjreedy(a)udel.edu>, Tian Gao <gaogaotiantian(a)hotmail.com>, Victor Stinner <vstinner(a)python.org>, achhina <amanschhina(a)gmail.com>, chgnrdv <52372310+chgnrdv(a)users.noreply.github.com>, dependabot[bot] <49699333+dependabot[bot](a)users.noreply.github.com>, neonene <53406459+neonene(a)users.noreply.github.com>, sunmy2019 <59365878+sunmy2019(a)users.noreply.github.com> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 35, done. remote: Counting objects: 2% (1/35) remote: Counting objects: 5% (2/35) remote: Counting objects: 8% (3/35) remote: Counting objects: 11% (4/35) remote: Counting objects: 14% (5/35) remote: Counting objects: 17% (6/35) remote: Counting objects: 20% (7/35) remote: Counting objects: 22% (8/35) remote: Counting objects: 25% (9/35) remote: Counting objects: 28% (10/35) remote: Counting objects: 31% (11/35) remote: Counting objects: 34% (12/35) remote: Counting objects: 37% (13/35) remote: Counting objects: 40% (14/35) remote: Counting objects: 42% (15/35) remote: Counting objects: 45% (16/35) remote: Counting objects: 48% (17/35) remote: Counting objects: 51% (18/35) remote: Counting objects: 54% (19/35) remote: Counting objects: 57% (20/35) remote: Counting objects: 60% (21/35) remote: Counting objects: 62% (22/35) remote: Counting objects: 65% (23/35) remote: Counting objects: 68% (24/35) remote: Counting objects: 71% (25/35) remote: Counting objects: 74% (26/35) remote: Counting objects: 77% (27/35) remote: Counting objects: 80% (28/35) remote: Counting objects: 82% (29/35) remote: Counting objects: 85% (30/35) remote: Counting objects: 88% (31/35) remote: Counting objects: 91% (32/35) remote: Counting objects: 94% (33/35) remote: Counting objects: 97% (34/35) remote: Counting objects: 100% (35/35) remote: Counting objects: 100% (35/35), done. remote: Compressing objects: 3% (1/27) remote: Compressing objects: 7% (2/27) remote: Compressing objects: 11% (3/27) remote: Compressing objects: 14% (4/27) remote: Compressing objects: 18% (5/27) remote: Compressing objects: 22% (6/27) remote: Compressing objects: 25% (7/27) remote: Compressing objects: 29% (8/27) remote: Compressing objects: 33% (9/27) remote: Compressing objects: 37% (10/27) remote: Compressing objects: 40% (11/27) remote: Compressing objects: 44% (12/27) remote: Compressing objects: 48% (13/27) remote: Compressing objects: 51% (14/27) remote: Compressing objects: 55% (15/27) remote: Compressing objects: 59% (16/27) remote: Compressing objects: 62% (17/27) remote: Compressing objects: 66% (18/27) remote: Compressing objects: 70% (19/27) remote: Compressing objects: 74% (20/27) remote: Compressing objects: 77% (21/27) remote: Compressing objects: 81% (22/27) remote: Compressing objects: 85% (23/27) remote: Compressing objects: 88% (24/27) remote: Compressing objects: 92% (25/27) remote: Compressing objects: 96% (26/27) remote: Compressing objects: 100% (27/27) remote: Compressing objects: 100% (27/27), done. remote: Total 35 (delta 12), reused 15 (delta 8), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to '3e525d22128cf040b3fd164f52cc6ae20ca58455'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 3e525d2212 gh-105396: Deprecate PyImport_ImportModuleNoBlock() function (#105397) Switched to and reset branch 'main' find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [Makefile:2778: clean-retain-profile] Error 1 (ignored) /home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/test_fstring.py:775: SyntaxWarning: invalid escape sequence '\_' exec('f"{F():¯\_(ツ)_/¯}"', {'F': CustomFormat}) In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:356:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 356 | case 18: EXTRACT_DIGIT(s, x, 100000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^ Timeout (0:15:00)! Thread 0x000003ff9ecf7080 (most recent call first): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/selectors.py", line 415 in select File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 2108 in _communicate File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 1209 in communicate File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 550 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 25 in _run_quiet File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 198 in freeze File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/test_tools/test_freeze.py", line 28 in test_freeze_simple_script File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 589 in _callTestMethod File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 634 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 690 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/runner.py", line 240 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/support/__init__.py", line 1115 in _run_suite File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/support/__init__.py", line 1241 in run_unittest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 294 in _test_module File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 330 in _runtest_inner2 File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 373 in _runtest_inner File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 248 in _runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 278 in runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 803 in _main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 758 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 822 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/__main__.py", line 2 in <module> File "<frozen runpy>", line 88 in _run_code File "<frozen runpy>", line 198 in _run_module_as_main make: *** [Makefile:2005: buildbottest] Error 1 Cannot open file '/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/test-results.xml' for upload Test report =========== Failed tests: - test_tools Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): - failed test (failure) (2f4a2d6c1b0c95f6be33a8c778b0212922a50530)
by buildbot＠python.org June 9, 2023

June 9, 2023

The Buildbot has detected a new failure on builder aarch64 CentOS9 Refleaks 3.12 while building Python. Full details are available at: https://buildbot.python.org/all/#/builders/1169/builds/18 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-CentOS9-aarch64 Build Reason: <unknown> Blamelist: BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Tests result: FAILURE then FAILURE == 448 tests OK. 10 slowest tests: - test_signal: 31 min 34 sec - test_multiprocessing_spawn: 16 min 58 sec - test_concurrent_futures: 16 min 3 sec - test_multiprocessing_forkserver: 9 min 36 sec - test_multiprocessing_fork: 8 min 22 sec - test_socket: 8 min 11 sec - test_gdb: 6 min 36 sec - test.test_asyncio.test_tasks: 6 min 27 sec - test_subprocess: 6 min 8 sec - test_io: 4 min 12 sec 1 test failed: test_import 18 tests skipped: test.test_asyncio.test_windows_events test.test_asyncio.test_windows_utils test_devpoll test_ioctl test_kqueue test_launcher test_msilib test_nis test_peg_generator test_startfile test_tix test_tkinter test_ttk test_winconsoleio test_winreg test_winsound test_wmi test_zipfile64 1 re-run test: test_import Total duration: 33 min 19 sec Captured traceback ================== TracebackTests.test_broken_parent) ... ok TracebackTests.test_import_bug) ... ok TracebackTests.test_exec_failure) ... ok TracebackTests.test_broken_from) ... ok TracebackTests.test_nonexistent_module_nested) ... ok TracebackTests.test_nonexistent_module) ... ok TracebackTests.test_exec_failure_nested) ... ok TracebackTests.test_unencodable_filename) ... ok TracebackTests.test_broken_parent_from) ... ok TracebackTests.test_broken_submodule) ... ok TracebackTests.test_syntax_error) ... ok Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=254459) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/resource_tracker.py:224: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=254459) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/resource_tracker.py:224: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=254459) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/resource_tracker.py:224: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=254459) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/resource_tracker.py:224: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=254459) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/resource_tracker.py:224: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory . Test report =========== Failed tests: - test_import Test leaking resources: - test_import: references - test_import: memory blocks Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) uploading test-results.xml (failure) (main)
by buildbot＠python.org June 9, 2023

June 9, 2023

The Buildbot has detected a new failure on builder AMD64 Arch Linux TraceRefs 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/484/builds/3459 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: pablogsal-arch-x86_64 Build Reason: <unknown> Blamelist: Eric Snow <ericsnowcurrently(a)gmail.com>, Irit Katriel <1055913+iritkatriel(a)users.noreply.github.com>, Terry Jan Reedy <tjreedy(a)udel.edu> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 29, done. remote: Counting objects: 3% (1/29) remote: Counting objects: 6% (2/29) remote: Counting objects: 10% (3/29) remote: Counting objects: 13% (4/29) remote: Counting objects: 17% (5/29) remote: Counting objects: 20% (6/29) remote: Counting objects: 24% (7/29) remote: Counting objects: 27% (8/29) remote: Counting objects: 31% (9/29) remote: Counting objects: 34% (10/29) remote: Counting objects: 37% (11/29) remote: Counting objects: 41% (12/29) remote: Counting objects: 44% (13/29) remote: Counting objects: 48% (14/29) remote: Counting objects: 51% (15/29) remote: Counting objects: 55% (16/29) remote: Counting objects: 58% (17/29) remote: Counting objects: 62% (18/29) remote: Counting objects: 65% (19/29) remote: Counting objects: 68% (20/29) remote: Counting objects: 72% (21/29) remote: Counting objects: 75% (22/29) remote: Counting objects: 79% (23/29) remote: Counting objects: 82% (24/29) remote: Counting objects: 86% (25/29) remote: Counting objects: 89% (26/29) remote: Counting objects: 93% (27/29) remote: Counting objects: 96% (28/29) remote: Counting objects: 100% (29/29) remote: Counting objects: 100% (29/29), done. remote: Compressing objects: 4% (1/21) remote: Compressing objects: 9% (2/21) remote: Compressing objects: 14% (3/21) remote: Compressing objects: 19% (4/21) remote: Compressing objects: 23% (5/21) remote: Compressing objects: 28% (6/21) remote: Compressing objects: 33% (7/21) remote: Compressing objects: 38% (8/21) remote: Compressing objects: 42% (9/21) remote: Compressing objects: 47% (10/21) remote: Compressing objects: 52% (11/21) remote: Compressing objects: 57% (12/21) remote: Compressing objects: 61% (13/21) remote: Compressing objects: 66% (14/21) remote: Compressing objects: 71% (15/21) remote: Compressing objects: 76% (16/21) remote: Compressing objects: 80% (17/21) remote: Compressing objects: 85% (18/21) remote: Compressing objects: 90% (19/21) remote: Compressing objects: 95% (20/21) remote: Compressing objects: 100% (21/21) remote: Compressing objects: 100% (21/21), done. remote: Total 29 (delta 8), reused 16 (delta 8), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'bb3454c1a75c90da3c34c060eb23403fed3fd958'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at bb3454c1a7 gh-102832: IDLE - update stackviewer open (#105528) Switched to and reset branch 'main' Objects/object.c:2197: _Py_ForgetReference: Assertion failed: invalid object chain Enable tracemalloc to get the memory block allocation traceback object address : 0x7feb5522cb90 object refcount : 0 object type : 0x557878649660 object type name: tuple object repr : <refcnt 0 at 0x7feb5522cb90> Fatal Python error: _PyObject_AssertFailed: _PyObject_AssertFailed Python runtime state: initialized Thread 0x00007feb6505a6c0 (most recent call first): File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/test__xxsubinterpreters.py", line 58 in run File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/threading.py", line 989 in run File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/threading.py", line 1052 in _bootstrap_inner File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/threading.py", line 1009 in _bootstrap Current thread 0x00007feb666e8740 (most recent call first): File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/test__xxsubinterpreters.py", line 48 in _wait_for_interp_to_run File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/test__xxsubinterpreters.py", line 66 in _running File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/contextlib.py", line 137 in __enter__ File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/test__xxsubinterpreters.py", line 701 in test_already_running File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/case.py", line 589 in _callTestMethod File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/case.py", line 634 in run File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/case.py", line 690 in __call__ File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/suite.py", line 122 in run File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/suite.py", line 84 in __call__ File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/suite.py", line 122 in run File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/suite.py", line 84 in __call__ File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/suite.py", line 122 in run File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/suite.py", line 84 in __call__ File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/runner.py", line 240 in run File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/support/__init__.py", line 1115 in _run_suite File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/support/__init__.py", line 1241 in run_unittest File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/runtest.py", line 294 in _test_module File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/runtest.py", line 330 in _runtest_inner2 File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/runtest.py", line 373 in _runtest_inner File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/runtest.py", line 248 in _runtest File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/runtest.py", line 278 in runtest File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/main.py", line 803 in _main File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/main.py", line 758 in main File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/main.py", line 822 in main File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/__main__.py", line 2 in <module> File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/runpy.py", line 88 in _run_code File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/runpy.py", line 198 in _run_module_as_main Extension modules: _testcapi, _xxsubinterpreters (total: 2) make: *** [Makefile:2007: buildbottest] Aborted (core dumped) Cannot open file '/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/test-results.xml' for upload Test report =========== Failed tests: - test__xxsubinterpreters Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) (3.12)
by buildbot＠python.org June 8, 2023

June 8, 2023

The Buildbot has detected a new failure on builder aarch64 Fedora Stable LTO 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1203/builds/50 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-stable-aarch64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Tests result: FAILURE then FAILURE == 449 tests OK. 10 slowest tests: - test_gdb: 2 min 54 sec - test_concurrent_futures: 2 min 28 sec - test_multiprocessing_spawn: 2 min 5 sec - test_multiprocessing_forkserver: 1 min 19 sec - test_multiprocessing_fork: 1 min 8 sec - test_signal: 1 min 2 sec - test_socket: 48.7 sec - test_io: 39.1 sec - test_math: 36.1 sec - test_subprocess: 33.6 sec 1 test failed: test.test_asyncio.test_subprocess 17 tests skipped: test.test_asyncio.test_windows_events test.test_asyncio.test_windows_utils test_devpoll test_ioctl test_kqueue test_launcher test_msilib test_peg_generator test_startfile test_tix test_tkinter test_ttk test_winconsoleio test_winreg test_winsound test_wmi test_zipfile64 1 re-run test: test.test_asyncio.test_subprocess Total duration: 3 min 17 sec Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-fedora-stable-aarch64.lto/build/Lib/test/test_asyncio/test_subprocess.py", line 788, in test_subprocess_consistent_callbacks self.loop.run_until_complete(main()) File "/home/buildbot/buildarea/3.12.cstratak-fedora-stable-aarch64.lto/build/Lib/asyncio/base_events.py", line 664, in run_until_complete return future.result() ^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-fedora-stable-aarch64.lto/build/Lib/test/test_asyncio/test_subprocess.py", line 780, in main self.assertEqual(events, [ AssertionError: Lists differ: ['process_exited', ('pipe_data_received', 1, b'stdout')] != [('pipe_data_received', 1, b'stdout'), ('p[95 chars]ted'] Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-fedora-stable-aarch64.lto/build/Lib/test/test_asyncio/test_subprocess.py", line 788, in test_subprocess_consistent_callbacks self.loop.run_until_complete(main()) File "/home/buildbot/buildarea/3.12.cstratak-fedora-stable-aarch64.lto/build/Lib/asyncio/base_events.py", line 664, in run_until_complete return future.result() ^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.12.cstratak-fedora-stable-aarch64.lto/build/Lib/test/test_asyncio/test_subprocess.py", line 780, in main self.assertEqual(events, [ AssertionError: Lists differ: [('pi[29 chars]t'), 'process_exited'] != [('pi[29 chars]t'), ('pipe_data_received', 2, b'stderr'), 'pi[57 chars]ted'] Test report =========== Failed tests: - test.test_asyncio.test_subprocess Failed subtests: - test_subprocess_consistent_callbacks - test.test_asyncio.test_subprocess.SubprocessFastWatcherTests.test_subprocess_consistent_callbacks - test_subprocess_consistent_callbacks - test.test_asyncio.test_subprocess.SubprocessThreadedWatcherTests.test_subprocess_consistent_callbacks Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x RHEL8 LTO + PGO 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1208/builds/62 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-rhel8-z Build Reason: <unknown> Blamelist: Eric Snow <ericsnowcurrently(a)gmail.com>, Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.12.edelsohn-rhel8-z.lto-pgo/build/Lib/test/test_asyncio/test_subprocess.py", line 788, in test_subprocess_consistent_callbacks self.loop.run_until_complete(main()) File "/home/dje/cpython-buildarea/3.12.edelsohn-rhel8-z.lto-pgo/build/Lib/asyncio/base_events.py", line 664, in run_until_complete return future.result() ^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.12.edelsohn-rhel8-z.lto-pgo/build/Lib/test/test_asyncio/test_subprocess.py", line 780, in main self.assertEqual(events, [ AssertionError: Lists differ: ['process_exited', ('pipe_data_received', 1, b'stdout')] != [('pipe_data_received', 1, b'stdout'), ('p[95 chars]ted'] Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.12.edelsohn-rhel8-z.lto-pgo/build/Lib/test/test_tools/test_freeze.py", line 27, in test_freeze_simple_script outdir, scriptfile, python = helper.prepare(script, outdir) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.12.edelsohn-rhel8-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 146, in prepare copy_source_tree(srcdir, SRCDIR) File "/home/dje/cpython-buildarea/3.12.edelsohn-rhel8-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 95, in copy_source_tree shutil.copytree(oldroot, newroot, ignore=ignore_non_src) File "/home/dje/cpython-buildarea/3.12.edelsohn-rhel8-z.lto-pgo/build/Lib/shutil.py", line 588, in copytree return _copytree(entries=entries, src=src, dst=dst, symlinks=symlinks, ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.12.edelsohn-rhel8-z.lto-pgo/build/Lib/shutil.py", line 542, in _copytree raise Error(errors) shutil.Error: [('/home/dje/cpython-buildarea/3.12.edelsohn-rhel8-z.lto-pgo/build/build/test_python_1102144æ/test_python_worker_1109018æ/test_python_cf_6nos0.sock', '/tmp/test_python_dm59e8to/tmptxe3iu4y/cpython/build/test_python_1102144æ/test_python_worker_1109018æ/test_python_cf_6nos0.sock', "[Errno 6] No such device or address: '/home/dje/cpython-buildarea/3.12.edelsohn-rhel8-z.lto-pgo/build/build/test_python_1102144æ/test_python_worker_1109018æ/test_python_cf_6nos0.sock'")] Test report =========== Failed tests: - test_tools - test.test_asyncio.test_subprocess Failed subtests: - test_freeze_simple_script - test.test_tools.test_freeze.TestFreeze.test_freeze_simple_script - test_subprocess_consistent_callbacks - test.test_asyncio.test_subprocess.SubprocessThreadedWatcherTests.test_subprocess_consistent_callbacks - test_subprocess_consistent_callbacks - test.test_asyncio.test_subprocess.SubprocessSafeWatcherTests.test_subprocess_consistent_callbacks Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) uploading test-results.xml (failure) (main)
by buildbot＠python.org June 8, 2023

June 8, 2023

The Buildbot has detected a new failure on builder s390x Fedora LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/545/builds/3941 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-z Build Reason: <unknown> Blamelist: Alex Waygood <Alex.Waygood(a)Gmail.com>, Artem Mukhin <artem.m.mukhin(a)gmail.com>, Bar Harel <bharel(a)barharel.com>, Barney Gale <barney.gale(a)gmail.com>, Brett Cannon <brett(a)python.org>, Carl Meyer <carl(a)oddbird.net>, Christopher Chavez <chrischavez(a)gmx.us>, Dong-hee Na <donghee.na(a)python.org>, Eric Snow <ericsnowcurrently(a)gmail.com>, Erlend E. Aasland <erlend.aasland(a)protonmail.com>, Gabriele N. Tornetta <P403n1x87(a)users.noreply.github.com>, Gregory P. Smith <greg(a)krypto.org>, Guido van Rossum <guido(a)python.org>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, Inada Naoki <songofacandy(a)gmail.com>, Irit Katriel <1055913+iritkatriel(a)users.noreply.github.com>, Jakub Kuczys <me(a)jacken.men>, Jeffery To <jeffery.to(a)gmail.com>, Jelle Zijlstra <jelle.zijlstra(a)gmail.com>, Joe Geisbauer <joegeisbauer(a)gmail.com>, Kirill Podoprigora <kirill.bast9(a)mail.ru>, Lysandros Nikolaou <lisandrosnik(a)gmail.com>, Mark Shannon <mark(a)hotpy.org>, Ned Deily <nad(a)python.org>, Nikita Sobolev <mail@sob olevn.me>, Pablo Galindo Salgado <Pablogsal(a)gmail.com>, Petr Viktorin <encukou(a)gmail.com>, Raymond Hettinger <rhettinger(a)users.noreply.github.com>, Shantanu <12621235+hauntsaninja(a)users.noreply.github.com>, Steve Dower <steve.dower(a)python.org>, Tian Gao <gaogaotiantian(a)hotmail.com>, Victor Stinner <vstinner(a)python.org>, achhina <amanschhina(a)gmail.com>, chgnrdv <52372310+chgnrdv(a)users.noreply.github.com>, dependabot[bot] <49699333+dependabot[bot](a)users.noreply.github.com>, neonene <53406459+neonene(a)users.noreply.github.com>, sunmy2019 <59365878+sunmy2019(a)users.noreply.github.com> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 12, done. remote: Counting objects: 8% (1/12) remote: Counting objects: 16% (2/12) remote: Counting objects: 25% (3/12) remote: Counting objects: 33% (4/12) remote: Counting objects: 41% (5/12) remote: Counting objects: 50% (6/12) remote: Counting objects: 58% (7/12) remote: Counting objects: 66% (8/12) remote: Counting objects: 75% (9/12) remote: Counting objects: 83% (10/12) remote: Counting objects: 91% (11/12) remote: Counting objects: 100% (12/12) remote: Counting objects: 100% (12/12), done. remote: Compressing objects: 10% (1/10) remote: Compressing objects: 20% (2/10) remote: Compressing objects: 30% (3/10) remote: Compressing objects: 40% (4/10) remote: Compressing objects: 50% (5/10) remote: Compressing objects: 60% (6/10) remote: Compressing objects: 70% (7/10) remote: Compressing objects: 80% (8/10) remote: Compressing objects: 90% (9/10) remote: Compressing objects: 100% (10/10) remote: Compressing objects: 100% (10/10), done. remote: Total 12 (delta 2), reused 5 (delta 2), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'a8eb7372eebe182fd4ef7381a742d84a368a7d1b'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at a8eb7372ee test_types: Replace raw assert statements (#105500) Switched to and reset branch 'main' find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [Makefile:2778: clean-retain-profile] Error 1 (ignored) /home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/test_fstring.py:775: SyntaxWarning: invalid escape sequence '\_' exec('f"{F():¯\_(ツ)_/¯}"', {'F': CustomFormat}) In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:356:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 356 | case 18: EXTRACT_DIGIT(s, x, 100000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^ Timeout (0:15:00)! Thread 0x000003ffae0f7080 (most recent call first): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/selectors.py", line 415 in select File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 2108 in _communicate File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 1209 in communicate File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 550 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 25 in _run_quiet File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 198 in freeze File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/test_tools/test_freeze.py", line 28 in test_freeze_simple_script File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 589 in _callTestMethod File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 634 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 690 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/runner.py", line 240 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/support/__init__.py", line 1115 in _run_suite File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/support/__init__.py", line 1241 in run_unittest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 294 in _test_module File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 330 in _runtest_inner2 File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 373 in _runtest_inner File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 248 in _runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 278 in runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 803 in _main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 758 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 822 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/__main__.py", line 2 in <module> File "<frozen runpy>", line 88 in _run_code File "<frozen runpy>", line 198 in _run_module_as_main make: *** [Makefile:2005: buildbottest] Error 1 Cannot open file '/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/test-results.xml' for upload Test report =========== Failed tests: - test_tools Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed compile (failure) (3.11)
by buildbot＠python.org June 8, 2023

June 8, 2023

The Buildbot has detected a new failure on builder PPC64 Fedora 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/940/builds/962 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-ppc64 Build Reason: <unknown> Blamelist: Alex Waygood <Alex.Waygood(a)Gmail.com>, Federico Caselli <CaselIT(a)users.noreply.github.com>, Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed compile (failure) Summary of the results of the build (if available): =================================================== Captured traceback ================== remote: Enumerating objects: 17, done.[K remote: Counting objects: 5% (1/17)[K remote: Counting objects: 11% (2/17)[K remote: Counting objects: 17% (3/17)[K remote: Counting objects: 23% (4/17)[K remote: Counting objects: 29% (5/17)[K remote: Counting objects: 35% (6/17)[K remote: Counting objects: 41% (7/17)[K remote: Counting objects: 47% (8/17)[K remote: Counting objects: 52% (9/17)[K remote: Counting objects: 58% (10/17)[K remote: Counting objects: 64% (11/17)[K remote: Counting objects: 70% (12/17)[K remote: Counting objects: 76% (13/17)[K remote: Counting objects: 82% (14/17)[K remote: Counting objects: 88% (15/17)[K remote: Counting objects: 94% (16/17)[K remote: Counting objects: 100% (17/17)[K remote: Counting objects: 100% (17/17), done.[K remote: Compressing objects: 7% (1/13)[K remote: Compressing objects: 15% (2/13)[K remote: Compressing objects: 23% (3/13)[K remote: Compressing objects: 30% (4/13)[K remote: Compressing objects: 38% (5/13)[K remote: Compressing objects: 46% (6/13)[K remote: Compressing objects: 53% (7/13)[K remote: Compressing objects: 61% (8/13)[K remote: Compressing objects: 69% (9/13)[K remote: Compressing objects: 76% (10/13)[K remote: Compressing objects: 84% (11/13)[K remote: Compressing objects: 92% (12/13)[K remote: Compressing objects: 100% (13/13)[K remote: Compressing objects: 100% (13/13), done.[K remote: Total 17 (delta 6), reused 10 (delta 4), pack-reused 0[K From https://github.com/python/cpython * branch 3.11 -> FETCH_HEAD Note: checking out 'af80db063fa9569c239367f430467cadac5b714d'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by performing another checkout. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -b with the checkout command again. Example: git checkout -b new_branch_name HEAD is now at af80db0... [3.11] Further improve docs for `typing.Annotated` (GH-105498) (#105504) Switched to and reset branch '3.11' configure: WARNING: powerpc64-unknown-linux-gnu/gcc is not supported configure: WARNING: Platform "powerpc64-unknown-linux-gnu" with compiler "gcc" is not supported by the CPython core team, see https://peps.python.org/pep-0011/ for more information. /tmp/ccx8U9AY.s: Assembler messages: /tmp/ccx8U9AY.s: Fatal error: can't write 788 bytes to section .text of Parser/parser.o because: 'No space left on device' as: BFD version 2.27-44.base.el7_9.1 assertion fail elf.c:3043 as: BFD version 2.27-44.base.el7_9.1 assertion fail elf.c:3043 as: BFD version 2.27-44.base.el7_9.1 assertion fail elf.c:3043 as: BFD version 2.27-44.base.el7_9.1 assertion fail elf.c:3043 as: BFD version 2.27-44.base.el7_9.1 assertion fail elf.c:3043 as: BFD version 2.27-44.base.el7_9.1 assertion fail elf.c:3043 as: BFD version 2.27-44.base.el7_9.1 assertion fail elf.c:3043 as: BFD version 2.27-44.base.el7_9.1 assertion fail elf.c:3043 as: BFD version 2.27-44.base.el7_9.1 assertion fail elf.c:3043 /tmp/ccx8U9AY.s: Fatal error: can't close Parser/parser.o: No space left on device make: *** [Parser/parser.o] Error 1 find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make: [clean-retain-profile] Error 1 (ignored) Test report =========== Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) uploading test-results.xml (failure) (3.12)
by buildbot＠python.org June 8, 2023

June 8, 2023

The Buildbot has detected a new failure on builder s390x Fedora LTO + PGO 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1179/builds/51 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-z Build Reason: <unknown> Blamelist: Alex Waygood <Alex.Waygood(a)Gmail.com>, Barney Gale <barney.gale(a)gmail.com>, Eric Snow <ericsnowcurrently(a)gmail.com>, Erlend E. Aasland <erlend.aasland(a)protonmail.com>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, Irit Katriel <1055913+iritkatriel(a)users.noreply.github.com>, Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com>, Steve Dower <steve.dower(a)python.org>, Thomas Wouters <thomas(a)python.org>, Victor Stinner <vstinner(a)python.org> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 5, done. remote: Counting objects: 20% (1/5) remote: Counting objects: 40% (2/5) remote: Counting objects: 60% (3/5) remote: Counting objects: 80% (4/5) remote: Counting objects: 100% (5/5) remote: Counting objects: 100% (5/5), done. remote: Compressing objects: 20% (1/5) remote: Compressing objects: 40% (2/5) remote: Compressing objects: 60% (3/5) remote: Compressing objects: 80% (4/5) remote: Compressing objects: 100% (5/5) remote: Compressing objects: 100% (5/5), done. remote: Total 5 (delta 0), reused 5 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch 3.12 -> FETCH_HEAD Note: switching to '2b6f475db8adf0d75a8fce5dd8f2f50b875753d6'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 2b6f475db8 [3.12] gh-105431: Remove unused stuff from `test_typing.NewTypeTests` (GH-105432) (#105489) Switched to and reset branch '3.12' find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [Makefile:2800: clean-retain-profile] Error 1 (ignored) /home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/test_fstring.py:775: SyntaxWarning: invalid escape sequence '\_' exec('f"{F():¯\_(ツ)_/¯}"', {'F': CustomFormat}) In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:356:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 356 | case 18: EXTRACT_DIGIT(s, x, 100000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^ Timeout (0:15:00)! Thread 0x000003ffbd777080 (most recent call first): File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/selectors.py", line 415 in select File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 2108 in _communicate File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 1209 in communicate File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 550 in run File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 25 in _run_quiet File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 198 in freeze File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/test_tools/test_freeze.py", line 28 in test_freeze_simple_script File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 589 in _callTestMethod File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 634 in run File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 690 in __call__ File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/runner.py", line 240 in run File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/support/__init__.py", line 1115 in _run_suite File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/support/__init__.py", line 1241 in run_unittest File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 294 in _test_module File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 330 in _runtest_inner2 File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 373 in _runtest_inner File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 248 in _runtest File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 278 in runtest File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 783 in _main File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 738 in main File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 802 in main File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/__main__.py", line 2 in <module> File "<frozen runpy>", line 88 in _run_code File "<frozen runpy>", line 198 in _run_module_as_main make: *** [Makefile:2011: buildbottest] Error 1 Cannot open file '/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/test-results.xml' for upload Test report =========== Failed tests: - test_tools Sincerely, -The Buildbot

1 0