Mailman 3 July 2023 - Buildbot-status

☠ Buildbot (Python): python/cpython - failed test (failure) uploading test-results.xml (failure) (main)
by buildbot＠python.org 23 Jul '23

23 Jul '23

The Buildbot has detected a new failure on builder s390x SLES 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/540/builds/5994 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-sles-z Build Reason: <unknown> Blamelist: Alex Waygood <Alex.Waygood(a)Gmail.com>, Ammar Askar <ammar(a)ammaraskar.com>, Barney Gale <barney.gale(a)gmail.com>, Bart Skowron <bart(a)bxsx.dev>, Brandt Bucher <brandtbucher(a)microsoft.com>, CF Bolz-Tereick <cfbolz(a)gmx.de>, Charlie Zhao <zhaoyu_hit(a)qq.com>, Chris Brett <chrisbrett665(a)gmail.com>, Daniele Procida <daniele(a)vurt.org>, Dennis Sweeney <36520290+sweeneyde(a)users.noreply.github.com>, Dong-hee Na <donghee.na(a)python.org>, Eric Snow <ericsnowcurrently(a)gmail.com>, Erlend E. Aasland <erlend(a)python.org>, Ezio Melotti <ezio.melotti(a)gmail.com>, Gilles Bassière <gbassiere(a)gmail.com>, Grant Ramsay <grant.ramsay(a)hotmail.com>, Gregory P. Smith <greg(a)krypto.org>, Grigoriev Semyon <33061489+grigoriev-semyon(a)users.noreply.github.com>, Guido van Rossum <guido(a)python.org>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, Inada Naoki <songofacandy(a)gmail.com>, Irit Katriel <1055913+iritkatriel(a)users.noreply.github.com>, J. Nick Koston <nick(a)koston.org>, Jack Nelson <jack(a)jacknelson.x yz>, Jakub Červinka <cervinka.jakub.1989(a)gmail.com>, James Hilton-Balfe <gobot1234yt(a)gmail.com>, Jason R. Coombs <jaraco(a)jaraco.com>, Jean-Baptiste Poupon <faltad(a)gmail.com>, Jim Porter <826865+jimporter(a)users.noreply.github.com>, Jocelyn Castellano <admin(a)malwarefight.gq>, Jochem Boersma <jochem.boersma(a)witteveenbos.com>, Joe Kaufeld <opensource(a)joekaufeld.com>, Jérôme Carretero <cJ-tub(a)zougloub.eu>, Kevin Diem <kg.diem(a)gmail.com>, Kirill Podoprigora <kirill.bast9(a)mail.ru>, Lukas van de Wiel <30800501+LukasvdWiel(a)users.noreply.github.com>, Makonede <61922615+Makonede(a)users.noreply.github.com>, Mario Corchero <mcorcherojim(a)bloomberg.net>, Mark Shannon <mark(a)hotpy.org>, Mathieu Dupuy <deronnax(a)gmail.com>, Matthieu Caneill <matthieucan(a)users.noreply.github.com>, Menelaos Kotoglou <contact(a)menelaoskotoglou.com>, Moritz Neeb <nt4u(a)kpvn.de>, Ned Batchelder <ned(a)nedbatchelder.com>, Nikita Sobolev <mail(a)sobolevn.me>, Oliver Rew <12968411+oliver-rew(a)users.noreply.github.com>, Pieter Eend ebak <pieter.eendebak(a)gmail.com>, Prince Roshan <princekrroshan01(a)gmail.com>, Raymond Hettinger <rhettinger(a)users.noreply.github.com>, Sebastiaan Zeeff <33516116+SebastiaanZ(a)users.noreply.github.com>, Serhiy Storchaka <storchaka(a)gmail.com>, Simone Rubino <daemo00(a)gmail.com>, Sven Arends <88426829+picnic-sven(a)users.noreply.github.com>, Terry Jan Reedy <tjreedy(a)udel.edu>, Tian Gao <gaogaotiantian(a)hotmail.com>, Tomas R <tomas.roun8(a)gmail.com>, TommyUnreal <45427816+TommyUnreal(a)users.noreply.github.com>, Victor Stinner <vstinner(a)python.org>, Yonatan Bitton <bityob(a)gmail.com>, Zach Brantmeier <brantmeierz(a)gmail.com>, cLupus <cLupus(a)users.noreply.github.com>, htsedebenham <31847376+htsedebenham(a)users.noreply.github.com>, littlebutt's workshop <luogan199686(a)gmail.com>, qqwqqw689 <114795525+qqwqqw689(a)users.noreply.github.com>, wulmer <wulmer(a)users.noreply.github.com> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-sles-z/build/Lib/test/test_tools/test_freeze.py", line 27, in test_freeze_simple_script outdir, scriptfile, python = helper.prepare(script, outdir) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-sles-z/build/Tools/freeze/test/freeze.py", line 146, in prepare copy_source_tree(srcdir, SRCDIR) File "/home/dje/cpython-buildarea/3.x.edelsohn-sles-z/build/Tools/freeze/test/freeze.py", line 95, in copy_source_tree shutil.copytree(oldroot, newroot, ignore=ignore_non_src) File "/home/dje/cpython-buildarea/3.x.edelsohn-sles-z/build/Lib/shutil.py", line 588, in copytree return _copytree(entries=entries, src=src, dst=dst, symlinks=symlinks, ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-sles-z/build/Lib/shutil.py", line 542, in _copytree raise Error(errors) shutil.Error: [('/home/dje/cpython-buildarea/3.x.edelsohn-sles-z/build/build/test_python_50736æ/test_python_worker_6045æ/test_python_0aqetym8.sock', '/tmp/test_python_wterx9fl/tmpseqziwtj/cpython/build/test_python_50736æ/test_python_worker_6045æ/test_python_0aqetym8.sock', "[Errno 6] No such device or address: '/home/dje/cpython-buildarea/3.x.edelsohn-sles-z/build/build/test_python_50736æ/test_python_worker_6045æ/test_python_0aqetym8.sock'")] Test report =========== Failed tests: - test_capi - test_tools Failed subtests: - test_freeze_simple_script - test.test_tools.test_freeze.TestFreeze.test_freeze_simple_script Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) (main)
by buildbot＠python.org 23 Jul '23

23 Jul '23

The Buildbot has detected a new failure on builder aarch64 Fedora Rawhide LTO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/307/builds/3789 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-rawhide-aarch64 Build Reason: <unknown> Blamelist: Dong-hee Na <donghee.na(a)python.org>, Ezio Melotti <ezio.melotti(a)gmail.com>, Victor Stinner <vstinner(a)python.org> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Tests result: ENV CHANGED == 432 tests OK. 10 slowest tests: - test_gdb: 3 min 14 sec - test_concurrent_futures: 2 min 26 sec - test_multiprocessing_spawn: 2 min 4 sec - test_multiprocessing_forkserver: 1 min 27 sec - test_socket: 1 min 13 sec - test_multiprocessing_fork: 1 min 13 sec - test_signal: 1 min 3 sec - test_subprocess: 43.7 sec - test_io: 39.5 sec - test_math: 36.6 sec 1 test altered the execution environment: test_interpreters 14 tests skipped: test.test_asyncio.test_windows_events test.test_asyncio.test_windows_utils test_devpoll test_ioctl test_kqueue test_launcher test_startfile test_tkinter test_ttk test_winconsoleio test_winreg test_winsound test_wmi test_zipfile64 Total duration: 3 min 15 sec Captured traceback ================== Traceback (most recent call last): File "<frozen importlib._bootstrap>", line 1266, in _find_and_load File "<frozen importlib._bootstrap>", line 1237, in _find_and_load_unlocked File "<frozen importlib._bootstrap>", line 841, in _load_unlocked File "<frozen importlib._bootstrap_external>", line 998, in exec_module File "<frozen importlib._bootstrap_external>", line 1094, in get_code File "<frozen importlib._bootstrap_external>", line 1193, in get_data TypeError: descriptor 'close' for '_io.BufferedReader' objects doesn't apply to a '_io.FileIO' object Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.lto/build/Lib/threading.py", line 1052, in _bootstrap_inner self.run() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.lto/build/Lib/threading.py", line 989, in run self._target(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.lto/build/Lib/test/test_interpreters.py", line 481, in task interp = interpreters.create() ^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.lto/build/Lib/test/support/interpreters.py", line 25, in create id = _interpreters.create(isolated=isolated) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ RuntimeError: interpreter creation failed k Test report =========== Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder aarch64 Fedora Rawhide Clang 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/40/builds/4468 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-rawhide-aarch64 Build Reason: <unknown> Blamelist: Victor Stinner <vstinner(a)python.org> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Tests result: ENV CHANGED == 432 tests OK. 10 slowest tests: - test_multiprocessing_spawn: 2 min 49 sec - test_concurrent_futures: 2 min 40 sec - test_multiprocessing_forkserver: 1 min 28 sec - test_math: 1 min 20 sec - test_multiprocessing_fork: 1 min 19 sec - test_capi: 1 min 12 sec - test_signal: 1 min 1 sec - test_socket: 58.6 sec - test_gdb: 51.6 sec - test_io: 45.8 sec 1 test altered the execution environment: test_interpreters 14 tests skipped: test.test_asyncio.test_windows_events test.test_asyncio.test_windows_utils test_devpoll test_ioctl test_kqueue test_launcher test_startfile test_tkinter test_ttk test_winconsoleio test_winreg test_winsound test_wmi test_zipfile64 Total duration: 3 min 14 sec Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.clang/build/Lib/threading.py", line 1052, in _bootstrap_inner self.run() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.clang/build/Lib/threading.py", line 989, in run self._target(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.clang/build/Lib/test/test_interpreters.py", line 481, in task interp = interpreters.create() ^^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64.clang/build/Lib/test/support/interpreters.py", line 25, in create id = _interpreters.create(isolated=isolated) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ RuntimeError: interpreter creation failed k Traceback (most recent call last): File "<frozen importlib._bootstrap>", line 1266, in _find_and_load File "<frozen importlib._bootstrap>", line 1237, in _find_and_load_unlocked File "<frozen importlib._bootstrap>", line 841, in _load_unlocked File "<frozen importlib._bootstrap_external>", line 998, in exec_module File "<frozen importlib._bootstrap_external>", line 1094, in get_code File "<frozen importlib._bootstrap_external>", line 1193, in get_data TypeError: descriptor 'close' for '_io.BufferedReader' objects doesn't apply to a '_io.FileIO' object Test report =========== Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) uploading test-results.xml (failure) (main)
by buildbot＠python.org 23 Jul '23

23 Jul '23

The Buildbot has detected a new failure on builder s390x Fedora Clang 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/3/builds/4318 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-z Build Reason: <unknown> Blamelist: Alex Waygood <Alex.Waygood(a)Gmail.com>, Ammar Askar <ammar(a)ammaraskar.com>, Barney Gale <barney.gale(a)gmail.com>, Bart Skowron <bart(a)bxsx.dev>, Brandt Bucher <brandtbucher(a)microsoft.com>, CF Bolz-Tereick <cfbolz(a)gmx.de>, Charlie Zhao <zhaoyu_hit(a)qq.com>, Chris Brett <chrisbrett665(a)gmail.com>, Daniele Procida <daniele(a)vurt.org>, Dennis Sweeney <36520290+sweeneyde(a)users.noreply.github.com>, Dong-hee Na <donghee.na(a)python.org>, Eric Snow <ericsnowcurrently(a)gmail.com>, Erlend E. Aasland <erlend(a)python.org>, Ezio Melotti <ezio.melotti(a)gmail.com>, Gilles Bassière <gbassiere(a)gmail.com>, Grant Ramsay <grant.ramsay(a)hotmail.com>, Gregory P. Smith <greg(a)krypto.org>, Grigoriev Semyon <33061489+grigoriev-semyon(a)users.noreply.github.com>, Guido van Rossum <guido(a)python.org>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, Inada Naoki <songofacandy(a)gmail.com>, Irit Katriel <1055913+iritkatriel(a)users.noreply.github.com>, J. Nick Koston <nick(a)koston.org>, Jack Nelson <jack(a)jacknelson.x yz>, Jakub Červinka <cervinka.jakub.1989(a)gmail.com>, James Hilton-Balfe <gobot1234yt(a)gmail.com>, Jason R. Coombs <jaraco(a)jaraco.com>, Jean-Baptiste Poupon <faltad(a)gmail.com>, Jim Porter <826865+jimporter(a)users.noreply.github.com>, Jocelyn Castellano <admin(a)malwarefight.gq>, Jochem Boersma <jochem.boersma(a)witteveenbos.com>, Joe Kaufeld <opensource(a)joekaufeld.com>, Kevin Diem <kg.diem(a)gmail.com>, Kirill Podoprigora <kirill.bast9(a)mail.ru>, Lukas van de Wiel <30800501+LukasvdWiel(a)users.noreply.github.com>, Makonede <61922615+Makonede(a)users.noreply.github.com>, Mario Corchero <mcorcherojim(a)bloomberg.net>, Mark Shannon <mark(a)hotpy.org>, Mathieu Dupuy <deronnax(a)gmail.com>, Matthieu Caneill <matthieucan(a)users.noreply.github.com>, Menelaos Kotoglou <contact(a)menelaoskotoglou.com>, Moritz Neeb <nt4u(a)kpvn.de>, Ned Batchelder <ned(a)nedbatchelder.com>, Nikita Sobolev <mail(a)sobolevn.me>, Oliver Rew <12968411+oliver-rew(a)users.noreply.github.com>, Pieter Eendebak <pieter.eendebak(a)gmail.com>, Prince Roshan <princekrroshan01(a)gmail.com>, Raymond Hettinger <rhettinger(a)users.noreply.github.com>, Sebastiaan Zeeff <33516116+SebastiaanZ(a)users.noreply.github.com>, Serhiy Storchaka <storchaka(a)gmail.com>, Simone Rubino <daemo00(a)gmail.com>, Sven Arends <88426829+picnic-sven(a)users.noreply.github.com>, Terry Jan Reedy <tjreedy(a)udel.edu>, Tian Gao <gaogaotiantian(a)hotmail.com>, Tomas R <tomas.roun8(a)gmail.com>, TommyUnreal <45427816+TommyUnreal(a)users.noreply.github.com>, Victor Stinner <vstinner(a)python.org>, Yonatan Bitton <bityob(a)gmail.com>, Zach Brantmeier <brantmeierz(a)gmail.com>, htsedebenham <31847376+htsedebenham(a)users.noreply.github.com>, littlebutt's workshop <luogan199686(a)gmail.com>, qqwqqw689 <114795525+qqwqqw689(a)users.noreply.github.com>, wulmer <wulmer(a)users.noreply.github.com> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 13, done. remote: Counting objects: 7% (1/13) remote: Counting objects: 15% (2/13) remote: Counting objects: 23% (3/13) remote: Counting objects: 30% (4/13) remote: Counting objects: 38% (5/13) remote: Counting objects: 46% (6/13) remote: Counting objects: 53% (7/13) remote: Counting objects: 61% (8/13) remote: Counting objects: 69% (9/13) remote: Counting objects: 76% (10/13) remote: Counting objects: 84% (11/13) remote: Counting objects: 92% (12/13) remote: Counting objects: 100% (13/13) remote: Counting objects: 100% (13/13), done. remote: Compressing objects: 20% (1/5) remote: Compressing objects: 40% (2/5) remote: Compressing objects: 60% (3/5) remote: Compressing objects: 80% (4/5) remote: Compressing objects: 100% (5/5) remote: Compressing objects: 100% (5/5), done. remote: Total 7 (delta 6), reused 3 (delta 2), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to '0810b0c435415c09c1907c6f418585bed558a2c1'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 0810b0c435 gh-106320: Remove _PyTuple_MaybeUntrack() C API (#107143) Switched to and reset branch 'main' configure: WARNING: s390x-ibm-linux-gnu/clang is not supported configure: WARNING: Platform "s390x-ibm-linux-gnu" with compiler "clang" is not supported by the CPython core team, see https://peps.python.org/pep-0011/ for more information. python: Python/instrumentation.c:262: int _PyInstruction_GetLength(PyCodeObject *, int): Assertion `opcode != 0' failed. Fatal Python error: Aborted Current thread 0x000003ffac0f70a0 (most recent call first): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/test/test_capi/test_misc.py", line 2441 in get_first_executor File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/test/test_capi/test_misc.py", line 2570 in test_pop_jump_if_not_none File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/unittest/case.py", line 589 in _callTestMethod File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/unittest/case.py", line 634 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/unittest/case.py", line 690 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/unittest/runner.py", line 240 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/test/support/__init__.py", line 1115 in _run_suite File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/test/support/__init__.py", line 1241 in run_unittest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/test/libregrtest/runtest.py", line 294 in _test_module File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/test/libregrtest/runtest.py", line 330 in _runtest_inner2 File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/test/libregrtest/runtest.py", line 373 in _runtest_inner File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/test/libregrtest/runtest.py", line 248 in _runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/test/libregrtest/runtest.py", line 278 in runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/test/libregrtest/main.py", line 803 in _main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/test/libregrtest/main.py", line 758 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/test/libregrtest/main.py", line 822 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/test/__main__.py", line 2 in <module> File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/runpy.py", line 88 in _run_code File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/runpy.py", line 198 in _run_module_as_main Extension modules: _testcapi, _testmultiphase, _testsinglephase, _xxsubinterpreters, _testinternalcapi (total: 5) make: *** [Makefile:2023: buildbottest] Aborted (core dumped) Cannot open file '/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/test-results.xml' for upload Test report =========== Failed tests: - test_capi Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/223/builds/4183 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-z Build Reason: <unknown> Blamelist: Alex Waygood <Alex.Waygood(a)Gmail.com>, Ammar Askar <ammar(a)ammaraskar.com>, Barney Gale <barney.gale(a)gmail.com>, Bart Skowron <bart(a)bxsx.dev>, Brandt Bucher <brandtbucher(a)microsoft.com>, CF Bolz-Tereick <cfbolz(a)gmx.de>, Charlie Zhao <zhaoyu_hit(a)qq.com>, Chris Brett <chrisbrett665(a)gmail.com>, Daniele Procida <daniele(a)vurt.org>, Dennis Sweeney <36520290+sweeneyde(a)users.noreply.github.com>, Dong-hee Na <donghee.na(a)python.org>, Eric Snow <ericsnowcurrently(a)gmail.com>, Erlend E. Aasland <erlend(a)python.org>, Ezio Melotti <ezio.melotti(a)gmail.com>, Gilles Bassière <gbassiere(a)gmail.com>, Grant Ramsay <grant.ramsay(a)hotmail.com>, Gregory P. Smith <greg(a)krypto.org>, Grigoriev Semyon <33061489+grigoriev-semyon(a)users.noreply.github.com>, Guido van Rossum <guido(a)python.org>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, Inada Naoki <songofacandy(a)gmail.com>, Irit Katriel <1055913+iritkatriel(a)users.noreply.github.com>, J. Nick Koston <nick(a)koston.org>, Jack Nelson <jack(a)jacknelson.x yz>, Jakub Červinka <cervinka.jakub.1989(a)gmail.com>, James Hilton-Balfe <gobot1234yt(a)gmail.com>, Jason R. Coombs <jaraco(a)jaraco.com>, Jean-Baptiste Poupon <faltad(a)gmail.com>, Jim Porter <826865+jimporter(a)users.noreply.github.com>, Jocelyn Castellano <admin(a)malwarefight.gq>, Jochem Boersma <jochem.boersma(a)witteveenbos.com>, Joe Kaufeld <opensource(a)joekaufeld.com>, Kevin Diem <kg.diem(a)gmail.com>, Kirill Podoprigora <kirill.bast9(a)mail.ru>, Lukas van de Wiel <30800501+LukasvdWiel(a)users.noreply.github.com>, Makonede <61922615+Makonede(a)users.noreply.github.com>, Mario Corchero <mcorcherojim(a)bloomberg.net>, Mark Shannon <mark(a)hotpy.org>, Mathieu Dupuy <deronnax(a)gmail.com>, Matthieu Caneill <matthieucan(a)users.noreply.github.com>, Menelaos Kotoglou <contact(a)menelaoskotoglou.com>, Moritz Neeb <nt4u(a)kpvn.de>, Ned Batchelder <ned(a)nedbatchelder.com>, Nikita Sobolev <mail(a)sobolevn.me>, Oliver Rew <12968411+oliver-rew(a)users.noreply.github.com>, Pieter Eendebak <pieter.eendebak(a)gmail.com>, Prince Roshan <princekrroshan01(a)gmail.com>, Raymond Hettinger <rhettinger(a)users.noreply.github.com>, Sebastiaan Zeeff <33516116+SebastiaanZ(a)users.noreply.github.com>, Serhiy Storchaka <storchaka(a)gmail.com>, Simone Rubino <daemo00(a)gmail.com>, Sven Arends <88426829+picnic-sven(a)users.noreply.github.com>, Terry Jan Reedy <tjreedy(a)udel.edu>, Tian Gao <gaogaotiantian(a)hotmail.com>, Tomas R <tomas.roun8(a)gmail.com>, TommyUnreal <45427816+TommyUnreal(a)users.noreply.github.com>, Victor Stinner <vstinner(a)python.org>, Yonatan Bitton <bityob(a)gmail.com>, Zach Brantmeier <brantmeierz(a)gmail.com>, htsedebenham <31847376+htsedebenham(a)users.noreply.github.com>, littlebutt's workshop <luogan199686(a)gmail.com>, qqwqqw689 <114795525+qqwqqw689(a)users.noreply.github.com>, wulmer <wulmer(a)users.noreply.github.com> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 32, done. remote: Counting objects: 3% (1/32) remote: Counting objects: 6% (2/32) remote: Counting objects: 9% (3/32) remote: Counting objects: 12% (4/32) remote: Counting objects: 15% (5/32) remote: Counting objects: 18% (6/32) remote: Counting objects: 21% (7/32) remote: Counting objects: 25% (8/32) remote: Counting objects: 28% (9/32) remote: Counting objects: 31% (10/32) remote: Counting objects: 34% (11/32) remote: Counting objects: 37% (12/32) remote: Counting objects: 40% (13/32) remote: Counting objects: 43% (14/32) remote: Counting objects: 46% (15/32) remote: Counting objects: 50% (16/32) remote: Counting objects: 53% (17/32) remote: Counting objects: 56% (18/32) remote: Counting objects: 59% (19/32) remote: Counting objects: 62% (20/32) remote: Counting objects: 65% (21/32) remote: Counting objects: 68% (22/32) remote: Counting objects: 71% (23/32) remote: Counting objects: 75% (24/32) remote: Counting objects: 78% (25/32) remote: Counting objects: 81% (26/32) remote: Counting objects: 84% (27/32) remote: Counting objects: 87% (28/32) remote: Counting objects: 90% (29/32) remote: Counting objects: 93% (30/32) remote: Counting objects: 96% (31/32) remote: Counting objects: 100% (32/32) remote: Counting objects: 100% (32/32), done. remote: Compressing objects: 5% (1/18) remote: Compressing objects: 11% (2/18) remote: Compressing objects: 16% (3/18) remote: Compressing objects: 22% (4/18) remote: Compressing objects: 27% (5/18) remote: Compressing objects: 33% (6/18) remote: Compressing objects: 38% (7/18) remote: Compressing objects: 44% (8/18) remote: Compressing objects: 50% (9/18) remote: Compressing objects: 55% (10/18) remote: Compressing objects: 61% (11/18) remote: Compressing objects: 66% (12/18) remote: Compressing objects: 72% (13/18) remote: Compressing objects: 77% (14/18) remote: Compressing objects: 83% (15/18) remote: Compressing objects: 88% (16/18) remote: Compressing objects: 94% (17/18) remote: Compressing objects: 100% (18/18) remote: Compressing objects: 100% (18/18), done. remote: Total 32 (delta 18), reused 18 (delta 14), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to '0810b0c435415c09c1907c6f418585bed558a2c1'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 0810b0c435 gh-106320: Remove _PyTuple_MaybeUntrack() C API (#107143) Switched to and reset branch 'main' python: Python/instrumentation.c:262: _PyInstruction_GetLength: Assertion `opcode != 0' failed. Fatal Python error: Aborted Current thread 0x000003ff9ab770a0 (most recent call first): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/test/test_capi/test_misc.py", line 2441 in get_first_executor File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/test/test_capi/test_misc.py", line 2570 in test_pop_jump_if_not_none File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/unittest/case.py", line 589 in _callTestMethod File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/unittest/case.py", line 634 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/unittest/case.py", line 690 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/unittest/runner.py", line 240 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/test/support/__init__.py", line 1115 in _run_suite File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/test/support/__init__.py", line 1241 in run_unittest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/test/libregrtest/runtest.py", line 294 in _test_module File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/test/libregrtest/runtest.py", line 330 in _runtest_inner2 File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/test/libregrtest/runtest.py", line 373 in _runtest_inner File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/test/libregrtest/runtest.py", line 248 in _runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/test/libregrtest/runtest.py", line 278 in runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/test/libregrtest/main.py", line 803 in _main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/test/libregrtest/main.py", line 758 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/test/libregrtest/main.py", line 822 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/test/__main__.py", line 2 in <module> File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/runpy.py", line 88 in _run_code File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/runpy.py", line 198 in _run_module_as_main Extension modules: _testcapi, _testmultiphase, _testsinglephase, _xxsubinterpreters, _testinternalcapi (total: 5) make: *** [Makefile:2023: buildbottest] Aborted (core dumped) Cannot open file '/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/test-results.xml' for upload Test report =========== Failed tests: - test_capi Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) uploading test-results.xml (failure) (main)
by buildbot＠python.org 23 Jul '23

23 Jul '23

The Buildbot has detected a new failure on builder s390x RHEL8 LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/442/builds/4647 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-rhel8-z Build Reason: <unknown> Blamelist: Alex Waygood <Alex.Waygood(a)Gmail.com>, Ammar Askar <ammar(a)ammaraskar.com>, Barney Gale <barney.gale(a)gmail.com>, Bart Skowron <bart(a)bxsx.dev>, Brandt Bucher <brandtbucher(a)microsoft.com>, CF Bolz-Tereick <cfbolz(a)gmx.de>, Charlie Zhao <zhaoyu_hit(a)qq.com>, Chris Brett <chrisbrett665(a)gmail.com>, Daniele Procida <daniele(a)vurt.org>, Dong-hee Na <donghee.na(a)python.org>, Eric Snow <ericsnowcurrently(a)gmail.com>, Erlend E. Aasland <erlend(a)python.org>, Ezio Melotti <ezio.melotti(a)gmail.com>, Gilles Bassière <gbassiere(a)gmail.com>, Grant Ramsay <grant.ramsay(a)hotmail.com>, Gregory P. Smith <greg(a)krypto.org>, Grigoriev Semyon <33061489+grigoriev-semyon(a)users.noreply.github.com>, Guido van Rossum <guido(a)python.org>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, Inada Naoki <songofacandy(a)gmail.com>, Irit Katriel <1055913+iritkatriel(a)users.noreply.github.com>, J. Nick Koston <nick(a)koston.org>, Jack Nelson <jack(a)jacknelson.xyz>, Jakub Červinka <cervinka.jakub.1989(a)gmail.com>, James Hi lton-Balfe <gobot1234yt(a)gmail.com>, Jason R. Coombs <jaraco(a)jaraco.com>, Jean-Baptiste Poupon <faltad(a)gmail.com>, Jim Porter <826865+jimporter(a)users.noreply.github.com>, Jocelyn Castellano <admin(a)malwarefight.gq>, Jochem Boersma <jochem.boersma(a)witteveenbos.com>, Joe Kaufeld <opensource(a)joekaufeld.com>, Kevin Diem <kg.diem(a)gmail.com>, Kirill Podoprigora <kirill.bast9(a)mail.ru>, Lukas van de Wiel <30800501+LukasvdWiel(a)users.noreply.github.com>, Makonede <61922615+Makonede(a)users.noreply.github.com>, Mario Corchero <mcorcherojim(a)bloomberg.net>, Mark Shannon <mark(a)hotpy.org>, Mathieu Dupuy <deronnax(a)gmail.com>, Matthieu Caneill <matthieucan(a)users.noreply.github.com>, Menelaos Kotoglou <contact(a)menelaoskotoglou.com>, Moritz Neeb <nt4u(a)kpvn.de>, Ned Batchelder <ned(a)nedbatchelder.com>, Nikita Sobolev <mail(a)sobolevn.me>, Oliver Rew <12968411+oliver-rew(a)users.noreply.github.com>, Pieter Eendebak <pieter.eendebak(a)gmail.com>, Raymond Hettinger <rhettinger(a)users.noreply.github.com>, Sebastiaan Z eeff <33516116+SebastiaanZ(a)users.noreply.github.com>, Serhiy Storchaka <storchaka(a)gmail.com>, Simone Rubino <daemo00(a)gmail.com>, Sven Arends <88426829+picnic-sven(a)users.noreply.github.com>, Terry Jan Reedy <tjreedy(a)udel.edu>, Tian Gao <gaogaotiantian(a)hotmail.com>, Tomas R <tomas.roun8(a)gmail.com>, TommyUnreal <45427816+TommyUnreal(a)users.noreply.github.com>, Victor Stinner <vstinner(a)python.org>, Yonatan Bitton <bityob(a)gmail.com>, Zach Brantmeier <brantmeierz(a)gmail.com>, htsedebenham <31847376+htsedebenham(a)users.noreply.github.com>, littlebutt's workshop <luogan199686(a)gmail.com>, qqwqqw689 <114795525+qqwqqw689(a)users.noreply.github.com>, wulmer <wulmer(a)users.noreply.github.com> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 32, done. remote: Counting objects: 3% (1/32) remote: Counting objects: 6% (2/32) remote: Counting objects: 9% (3/32) remote: Counting objects: 12% (4/32) remote: Counting objects: 15% (5/32) remote: Counting objects: 18% (6/32) remote: Counting objects: 21% (7/32) remote: Counting objects: 25% (8/32) remote: Counting objects: 28% (9/32) remote: Counting objects: 31% (10/32) remote: Counting objects: 34% (11/32) remote: Counting objects: 37% (12/32) remote: Counting objects: 40% (13/32) remote: Counting objects: 43% (14/32) remote: Counting objects: 46% (15/32) remote: Counting objects: 50% (16/32) remote: Counting objects: 53% (17/32) remote: Counting objects: 56% (18/32) remote: Counting objects: 59% (19/32) remote: Counting objects: 62% (20/32) remote: Counting objects: 65% (21/32) remote: Counting objects: 68% (22/32) remote: Counting objects: 71% (23/32) remote: Counting objects: 75% (24/32) remote: Counting objects: 78% (25/32) remote: Counting objects: 81% (26/32) remote: Counting objects: 84% (27/32) remote: Counting objects: 87% (28/32) remote: Counting objects: 90% (29/32) remote: Counting objects: 93% (30/32) remote: Counting objects: 96% (31/32) remote: Counting objects: 100% (32/32) remote: Counting objects: 100% (32/32), done. remote: Compressing objects: 5% (1/18) remote: Compressing objects: 11% (2/18) remote: Compressing objects: 16% (3/18) remote: Compressing objects: 22% (4/18) remote: Compressing objects: 27% (5/18) remote: Compressing objects: 33% (6/18) remote: Compressing objects: 38% (7/18) remote: Compressing objects: 44% (8/18) remote: Compressing objects: 50% (9/18) remote: Compressing objects: 55% (10/18) remote: Compressing objects: 61% (11/18) remote: Compressing objects: 66% (12/18) remote: Compressing objects: 72% (13/18) remote: Compressing objects: 77% (14/18) remote: Compressing objects: 83% (15/18) remote: Compressing objects: 88% (16/18) remote: Compressing objects: 94% (17/18) remote: Compressing objects: 100% (18/18) remote: Compressing objects: 100% (18/18), done. remote: Total 32 (delta 18), reused 18 (delta 14), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'adb27ea2d5e2f74f4be8f15b199889161c33e801'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at adb27ea2d5 gh-106320: Remove _PyIsSelectable_fd() C API (#107142) Switched to and reset branch 'main' find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [Makefile:2798: clean-retain-profile] Error 1 (ignored) Timeout (0:15:00)! Thread 0x000003ffb9e77730 (most recent call first): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/selectors.py", line 398 in select File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/subprocess.py", line 2108 in _communicate File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/subprocess.py", line 1209 in communicate File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/subprocess.py", line 550 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 25 in _run_quiet File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 198 in freeze File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/test_tools/test_freeze.py", line 28 in test_freeze_simple_script File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/unittest/case.py", line 589 in _callTestMethod File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/unittest/case.py", line 634 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/unittest/case.py", line 690 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/unittest/runner.py", line 240 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/support/__init__.py", line 1115 in _run_suite File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/support/__init__.py", line 1241 in run_unittest File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 294 in _test_module File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 330 in _runtest_inner2 File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 373 in _runtest_inner File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 248 in _runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 278 in runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 803 in _main File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 758 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 822 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/__main__.py", line 2 in <module> File "<frozen runpy>", line 88 in _run_code File "<frozen runpy>", line 198 in _run_module_as_main make: *** [Makefile:2025: buildbottest] Error 1 Cannot open file '/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/test-results.xml' for upload Test report =========== Failed tests: - test_tools Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) uploading test-results.xml (failure) (main)
by buildbot＠python.org 23 Jul '23

23 Jul '23

The Buildbot has detected a new failure on builder s390x SLES 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/540/builds/5990 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-sles-z Build Reason: <unknown> Blamelist: Alex Waygood <Alex.Waygood(a)Gmail.com>, Ammar Askar <ammar(a)ammaraskar.com>, Barney Gale <barney.gale(a)gmail.com>, Bart Skowron <bart(a)bxsx.dev>, Brandt Bucher <brandtbucher(a)microsoft.com>, CF Bolz-Tereick <cfbolz(a)gmx.de>, Charlie Zhao <zhaoyu_hit(a)qq.com>, Chris Brett <chrisbrett665(a)gmail.com>, Daniele Procida <daniele(a)vurt.org>, Dennis Sweeney <36520290+sweeneyde(a)users.noreply.github.com>, Dong-hee Na <donghee.na(a)python.org>, Eric Snow <ericsnowcurrently(a)gmail.com>, Erlend E. Aasland <erlend(a)python.org>, Gilles Bassière <gbassiere(a)gmail.com>, Grant Ramsay <grant.ramsay(a)hotmail.com>, Gregory P. Smith <greg(a)krypto.org>, Grigoriev Semyon <33061489+grigoriev-semyon(a)users.noreply.github.com>, Guido van Rossum <guido(a)python.org>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, Inada Naoki <songofacandy(a)gmail.com>, Irit Katriel <1055913+iritkatriel(a)users.noreply.github.com>, J. Nick Koston <nick(a)koston.org>, Jack Nelson <jack(a)jacknelson.xyz>, Jakub Červinka <cervinka.jakub.19 89(a)gmail.com>, James Hilton-Balfe <gobot1234yt(a)gmail.com>, Jason R. Coombs <jaraco(a)jaraco.com>, Jean-Baptiste Poupon <faltad(a)gmail.com>, Jim Porter <826865+jimporter(a)users.noreply.github.com>, Jocelyn Castellano <admin(a)malwarefight.gq>, Jochem Boersma <jochem.boersma(a)witteveenbos.com>, Joe Kaufeld <opensource(a)joekaufeld.com>, Kevin Diem <kg.diem(a)gmail.com>, Kirill Podoprigora <kirill.bast9(a)mail.ru>, Lukas van de Wiel <30800501+LukasvdWiel(a)users.noreply.github.com>, Makonede <61922615+Makonede(a)users.noreply.github.com>, Mario Corchero <mcorcherojim(a)bloomberg.net>, Mark Shannon <mark(a)hotpy.org>, Mathieu Dupuy <deronnax(a)gmail.com>, Matthieu Caneill <matthieucan(a)users.noreply.github.com>, Menelaos Kotoglou <contact(a)menelaoskotoglou.com>, Moritz Neeb <nt4u(a)kpvn.de>, Ned Batchelder <ned(a)nedbatchelder.com>, Nikita Sobolev <mail(a)sobolevn.me>, Oliver Rew <12968411+oliver-rew(a)users.noreply.github.com>, Pieter Eendebak <pieter.eendebak(a)gmail.com>, Prince Roshan <princekrroshan01(a)gmail.com>, Ra ymond Hettinger <rhettinger(a)users.noreply.github.com>, Sebastiaan Zeeff <33516116+SebastiaanZ(a)users.noreply.github.com>, Serhiy Storchaka <storchaka(a)gmail.com>, Simone Rubino <daemo00(a)gmail.com>, Steve Dower <steve.dower(a)python.org>, Sven Arends <88426829+picnic-sven(a)users.noreply.github.com>, Terry Jan Reedy <tjreedy(a)udel.edu>, Tian Gao <gaogaotiantian(a)hotmail.com>, Tomas R <tomas.roun8(a)gmail.com>, TommyUnreal <45427816+TommyUnreal(a)users.noreply.github.com>, Victor Stinner <vstinner(a)python.org>, Yonatan Bitton <bityob(a)gmail.com>, Zach Brantmeier <brantmeierz(a)gmail.com>, htsedebenham <31847376+htsedebenham(a)users.noreply.github.com>, littlebutt's workshop <luogan199686(a)gmail.com>, qqwqqw689 <114795525+qqwqqw689(a)users.noreply.github.com>, wulmer <wulmer(a)users.noreply.github.com> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-sles-z/build/Lib/test/test_asyncio/test_subprocess.py", line 788, in test_subprocess_consistent_callbacks self.loop.run_until_complete(main()) File "/home/dje/cpython-buildarea/3.x.edelsohn-sles-z/build/Lib/asyncio/base_events.py", line 664, in run_until_complete return future.result() ^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-sles-z/build/Lib/test/test_asyncio/test_subprocess.py", line 780, in main self.assertEqual(events, [ AssertionError: Lists differ: [('pi[29 chars]t'), 'pipe_connection_lost', ('pipe_data_recei[57 chars]ted'] != [('pi[29 chars]t'), ('pipe_data_received', 2, b'stderr'), 'pi[57 chars]ted'] Test report =========== Failed tests: - test_capi - test.test_asyncio.test_subprocess Failed subtests: - test_subprocess_consistent_callbacks - test.test_asyncio.test_subprocess.SubprocessThreadedWatcherTests.test_subprocess_consistent_callbacks Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) uploading test-results.xml (failure) (main)
by buildbot＠python.org 23 Jul '23

23 Jul '23

The Buildbot has detected a new failure on builder s390x RHEL8 LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/442/builds/4645 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-rhel8-z Build Reason: <unknown> Blamelist: Alex Waygood <Alex.Waygood(a)Gmail.com>, Ammar Askar <ammar(a)ammaraskar.com>, Barney Gale <barney.gale(a)gmail.com>, Bart Skowron <bart(a)bxsx.dev>, Brandt Bucher <brandtbucher(a)microsoft.com>, CF Bolz-Tereick <cfbolz(a)gmx.de>, Charlie Zhao <zhaoyu_hit(a)qq.com>, Chris Brett <chrisbrett665(a)gmail.com>, Daniele Procida <daniele(a)vurt.org>, Dong-hee Na <donghee.na(a)python.org>, Eric Snow <ericsnowcurrently(a)gmail.com>, Erlend E. Aasland <erlend(a)python.org>, Gilles Bassière <gbassiere(a)gmail.com>, Grant Ramsay <grant.ramsay(a)hotmail.com>, Gregory P. Smith <greg(a)krypto.org>, Grigoriev Semyon <33061489+grigoriev-semyon(a)users.noreply.github.com>, Guido van Rossum <guido(a)python.org>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, Inada Naoki <songofacandy(a)gmail.com>, Irit Katriel <1055913+iritkatriel(a)users.noreply.github.com>, J. Nick Koston <nick(a)koston.org>, Jack Nelson <jack(a)jacknelson.xyz>, Jakub Červinka <cervinka.jakub.1989(a)gmail.com>, James Hilton-Balfe <gobot1234yt(a)gmail.com>, Jas on R. Coombs <jaraco(a)jaraco.com>, Jean-Baptiste Poupon <faltad(a)gmail.com>, Jim Porter <826865+jimporter(a)users.noreply.github.com>, Jocelyn Castellano <admin(a)malwarefight.gq>, Jochem Boersma <jochem.boersma(a)witteveenbos.com>, Joe Kaufeld <opensource(a)joekaufeld.com>, Kevin Diem <kg.diem(a)gmail.com>, Kirill Podoprigora <kirill.bast9(a)mail.ru>, Lukas van de Wiel <30800501+LukasvdWiel(a)users.noreply.github.com>, Makonede <61922615+Makonede(a)users.noreply.github.com>, Mario Corchero <mcorcherojim(a)bloomberg.net>, Mark Shannon <mark(a)hotpy.org>, Mathieu Dupuy <deronnax(a)gmail.com>, Matthieu Caneill <matthieucan(a)users.noreply.github.com>, Menelaos Kotoglou <contact(a)menelaoskotoglou.com>, Moritz Neeb <nt4u(a)kpvn.de>, Ned Batchelder <ned(a)nedbatchelder.com>, Nikita Sobolev <mail(a)sobolevn.me>, Oliver Rew <12968411+oliver-rew(a)users.noreply.github.com>, Pieter Eendebak <pieter.eendebak(a)gmail.com>, Raymond Hettinger <rhettinger(a)users.noreply.github.com>, Sebastiaan Zeeff <33516116+SebastiaanZ(a)users.norepl y.github.com>, Serhiy Storchaka <storchaka(a)gmail.com>, Simone Rubino <daemo00(a)gmail.com>, Sven Arends <88426829+picnic-sven(a)users.noreply.github.com>, Terry Jan Reedy <tjreedy(a)udel.edu>, Tian Gao <gaogaotiantian(a)hotmail.com>, Tomas R <tomas.roun8(a)gmail.com>, Victor Stinner <vstinner(a)python.org>, Yonatan Bitton <bityob(a)gmail.com>, Zach Brantmeier <brantmeierz(a)gmail.com>, htsedebenham <31847376+htsedebenham(a)users.noreply.github.com>, littlebutt's workshop <luogan199686(a)gmail.com>, qqwqqw689 <114795525+qqwqqw689(a)users.noreply.github.com>, wulmer <wulmer(a)users.noreply.github.com> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 110, done. remote: Counting objects: 1% (1/81) remote: Counting objects: 2% (2/81) remote: Counting objects: 3% (3/81) remote: Counting objects: 4% (4/81) remote: Counting objects: 6% (5/81) remote: Counting objects: 7% (6/81) remote: Counting objects: 8% (7/81) remote: Counting objects: 9% (8/81) remote: Counting objects: 11% (9/81) remote: Counting objects: 12% (10/81) remote: Counting objects: 13% (11/81) remote: Counting objects: 14% (12/81) remote: Counting objects: 16% (13/81) remote: Counting objects: 17% (14/81) remote: Counting objects: 18% (15/81) remote: Counting objects: 19% (16/81) remote: Counting objects: 20% (17/81) remote: Counting objects: 22% (18/81) remote: Counting objects: 23% (19/81) remote: Counting objects: 24% (20/81) remote: Counting objects: 25% (21/81) remote: Counting objects: 27% (22/81) remote: Counting objects: 28% (23/81) remote: Counting objects: 29% (24/81) remote: Counting objects: 30% (25/81) remote: Counting objects: 32% (26/81) remote: Counting objects: 33% (27/81) remote: Counting objects: 34% (28/81) remote: Counting objects: 35% (29/81) remote: Counting objects: 37% (30/81) remote: Counting objects: 38% (31/81) remote: Counting objects: 39% (32/81) remote: Counting objects: 40% (33/81) remote: Counting objects: 41% (34/81) remote: Counting objects: 43% (35/81) remote: Counting objects: 44% (36/81) remote: Counting objects: 45% (37/81) remote: Counting objects: 46% (38/81) remote: Counting objects: 48% (39/81) remote: Counting objects: 49% (40/81) remote: Counting objects: 50% (41/81) remote: Counting objects: 51% (42/81) remote: Counting objects: 53% (43/81) remote: Counting objects: 54% (44/81) remote: Counting objects: 55% (45/81) remote: Counting objects: 56% (46/81) remote: Counting objects: 58% (47/81) remote: Counting objects: 59% (48/81) remote: Counting objects: 60% (49/81) remote: Counting objects: 61% (50/81) remote: Counting objects: 62% (51/81) remote: Counting objects: 64% (52/81) remote: Counting objects: 65% (53/81) remote: Counting objects: 66% (54/81) remote: Counting objects: 67% (55/81) remote: Counting objects: 69% (56/81) remote: Counting objects: 70% (57/81) remote: Counting objects: 71% (58/81) remote: Counting objects: 72% (59/81) remote: Counting objects: 74% (60/81) remote: Counting objects: 75% (61/81) remote: Counting objects: 76% (62/81) remote: Counting objects: 77% (63/81) remote: Counting objects: 79% (64/81) remote: Counting objects: 80% (65/81) remote: Counting objects: 81% (66/81) remote: Counting objects: 82% (67/81) remote: Counting objects: 83% (68/81) remote: Counting objects: 85% (69/81) remote: Counting objects: 86% (70/81) remote: Counting objects: 87% (71/81) remote: Counting objects: 88% (72/81) remote: Counting objects: 90% (73/81) remote: Counting objects: 91% (74/81) remote: Counting objects: 92% (75/81) remote: Counting objects: 93% (76/81) remote: Counting objects: 95% (77/81) remote: Counting objects: 96% (78/81) remote: Counting objects: 97% (79/81) remote: Counting objects: 98% (80/81) remote: Counting objects: 100% (81/81) remote: Counting objects: 100% (81/81), done. remote: Compressing objects: 2% (1/46) remote: Compressing objects: 4% (2/46) remote: Compressing objects: 6% (3/46) remote: Compressing objects: 8% (4/46) remote: Compressing objects: 10% (5/46) remote: Compressing objects: 13% (6/46) remote: Compressing objects: 15% (7/46) remote: Compressing objects: 17% (8/46) remote: Compressing objects: 19% (9/46) remote: Compressing objects: 21% (10/46) remote: Compressing objects: 23% (11/46) remote: Compressing objects: 26% (12/46) remote: Compressing objects: 28% (13/46) remote: Compressing objects: 30% (14/46) remote: Compressing objects: 32% (15/46) remote: Compressing objects: 34% (16/46) remote: Compressing objects: 36% (17/46) remote: Compressing objects: 39% (18/46) remote: Compressing objects: 41% (19/46) remote: Compressing objects: 43% (20/46) remote: Compressing objects: 45% (21/46) remote: Compressing objects: 47% (22/46) remote: Compressing objects: 50% (23/46) remote: Compressing objects: 52% (24/46) remote: Compressing objects: 54% (25/46) remote: Compressing objects: 56% (26/46) remote: Compressing objects: 58% (27/46) remote: Compressing objects: 60% (28/46) remote: Compressing objects: 63% (29/46) remote: Compressing objects: 65% (30/46) remote: Compressing objects: 67% (31/46) remote: Compressing objects: 69% (32/46) remote: Compressing objects: 71% (33/46) remote: Compressing objects: 73% (34/46) remote: Compressing objects: 76% (35/46) remote: Compressing objects: 78% (36/46) remote: Compressing objects: 80% (37/46) remote: Compressing objects: 82% (38/46) remote: Compressing objects: 84% (39/46) remote: Compressing objects: 86% (40/46) remote: Compressing objects: 89% (41/46) remote: Compressing objects: 91% (42/46) remote: Compressing objects: 93% (43/46) remote: Compressing objects: 95% (44/46) remote: Compressing objects: 97% (45/46) remote: Compressing objects: 100% (46/46) remote: Compressing objects: 100% (46/46), done. Receiving objects: 0% (1/110) Receiving objects: 1% (2/110) Receiving objects: 2% (3/110) Receiving objects: 3% (4/110) Receiving objects: 4% (5/110) Receiving objects: 5% (6/110) Receiving objects: 6% (7/110) Receiving objects: 7% (8/110) Receiving objects: 8% (9/110) Receiving objects: 9% (10/110) Receiving objects: 10% (11/110) Receiving objects: 11% (13/110) Receiving objects: 12% (14/110) Receiving objects: 13% (15/110) Receiving objects: 14% (16/110) Receiving objects: 15% (17/110) Receiving objects: 16% (18/110) Receiving objects: 17% (19/110) Receiving objects: 18% (20/110) Receiving objects: 19% (21/110) Receiving objects: 20% (22/110) Receiving objects: 21% (24/110) Receiving objects: 22% (25/110) Receiving objects: 23% (26/110) Receiving objects: 24% (27/110) Receiving objects: 25% (28/110) Receiving objects: 26% (29/110) Receiving objects: 27% (30/110) Receiving objects: 28% (31/110) Receiving objects: 29% (32/110) Receiving objects: 30% (33/110) Receiving objects: 31% (35/110) Receiving objects: 32% (36/110) Receiving objects: 33% (37/110) Receiving objects: 34% (38/110) Receiving objects: 35% (39/110) Receiving objects: 36% (40/110) Receiving objects: 37% (41/110) Receiving objects: 38% (42/110) Receiving objects: 39% (43/110) Receiving objects: 40% (44/110) Receiving objects: 41% (46/110) Receiving objects: 42% (47/110) Receiving objects: 43% (48/110) Receiving objects: 44% (49/110) Receiving objects: 45% (50/110) Receiving objects: 46% (51/110) Receiving objects: 47% (52/110) Receiving objects: 48% (53/110) Receiving objects: 49% (54/110) Receiving objects: 50% (55/110) Receiving objects: 51% (57/110) Receiving objects: 52% (58/110) Receiving objects: 53% (59/110) Receiving objects: 54% (60/110) Receiving objects: 55% (61/110) Receiving objects: 56% (62/110) Receiving objects: 57% (63/110) Receiving objects: 58% (64/110) Receiving objects: 59% (65/110) Receiving objects: 60% (66/110) Receiving objects: 61% (68/110) Receiving objects: 62% (69/110) Receiving objects: 63% (70/110) Receiving objects: 64% (71/110) Receiving objects: 65% (72/110) Receiving objects: 66% (73/110) Receiving objects: 67% (74/110) Receiving objects: 68% (75/110) Receiving objects: 69% (76/110) Receiving objects: 70% (77/110) Receiving objects: 71% (79/110) Receiving objects: 72% (80/110) Receiving objects: 73% (81/110) Receiving objects: 74% (82/110) Receiving objects: 75% (83/110) Receiving objects: 76% (84/110) Receiving objects: 77% (85/110) Receiving objects: 78% (86/110) Receiving objects: 79% (87/110) Receiving objects: 80% (88/110) Receiving objects: 81% (90/110) Receiving objects: 82% (91/110) Receiving objects: 83% (92/110) Receiving objects: 84% (93/110) Receiving objects: 85% (94/110) Receiving objects: 86% (95/110) Receiving objects: 87% (96/110) Receiving objects: 88% (97/110) Receiving objects: 89% (98/110) Receiving objects: 90% (99/110) Receiving objects: 91% (101/110) Receiving objects: 92% (102/110) Receiving objects: 93% (103/110) Receiving objects: 94% (104/110) Receiving objects: 95% (105/110) Receiving objects: 96% (106/110) Receiving objects: 97% (107/110) remote: Total 110 (delta 58), reused 36 (delta 35), pack-reused 29 Receiving objects: 98% (108/110) Receiving objects: 99% (109/110) Receiving objects: 100% (110/110) Receiving objects: 100% (110/110), 324.71 KiB | 23.19 MiB/s, done. Resolving deltas: 0% (0/58) Resolving deltas: 3% (2/58) Resolving deltas: 5% (3/58) Resolving deltas: 6% (4/58) Resolving deltas: 8% (5/58) Resolving deltas: 10% (6/58) Resolving deltas: 12% (7/58) Resolving deltas: 13% (8/58) Resolving deltas: 15% (9/58) Resolving deltas: 17% (10/58) Resolving deltas: 18% (11/58) Resolving deltas: 20% (12/58) Resolving deltas: 22% (13/58) Resolving deltas: 24% (14/58) Resolving deltas: 25% (15/58) Resolving deltas: 27% (16/58) Resolving deltas: 29% (17/58) Resolving deltas: 31% (18/58) Resolving deltas: 32% (19/58) Resolving deltas: 34% (20/58) Resolving deltas: 36% (21/58) Resolving deltas: 37% (22/58) Resolving deltas: 39% (23/58) Resolving deltas: 41% (24/58) Resolving deltas: 43% (25/58) Resolving deltas: 44% (26/58) Resolving deltas: 46% (27/58) Resolving deltas: 48% (28/58) Resolving deltas: 50% (29/58) Resolving deltas: 51% (30/58) Resolving deltas: 53% (31/58) Resolving deltas: 55% (32/58) Resolving deltas: 56% (33/58) Resolving deltas: 58% (34/58) Resolving deltas: 60% (35/58) Resolving deltas: 62% (36/58) Resolving deltas: 63% (37/58) Resolving deltas: 65% (38/58) Resolving deltas: 67% (39/58) Resolving deltas: 68% (40/58) Resolving deltas: 70% (41/58) Resolving deltas: 72% (42/58) Resolving deltas: 74% (43/58) Resolving deltas: 75% (44/58) Resolving deltas: 77% (45/58) Resolving deltas: 79% (46/58) Resolving deltas: 81% (47/58) Resolving deltas: 82% (48/58) Resolving deltas: 84% (49/58) Resolving deltas: 86% (50/58) Resolving deltas: 87% (51/58) Resolving deltas: 89% (52/58) Resolving deltas: 91% (53/58) Resolving deltas: 93% (54/58) Resolving deltas: 94% (55/58) Resolving deltas: 96% (56/58) Resolving deltas: 98% (57/58) Resolving deltas: 100% (58/58) Resolving deltas: 100% (58/58), completed with 25 local objects. From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'c65592c4d6d7552fb6284442906a96a6874cb266'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at c65592c4d6 gh-106186: Don't report MultipartInvariantViolationDefect for valid multipart emails when parsing header only (#107016) Switched to and reset branch 'main' find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [Makefile:2798: clean-retain-profile] Error 1 (ignored) Timeout (0:15:00)! Thread 0x000003ff9d877730 (most recent call first): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/selectors.py", line 398 in select File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/subprocess.py", line 2108 in _communicate File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/subprocess.py", line 1209 in communicate File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/subprocess.py", line 550 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 25 in _run_quiet File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 198 in freeze File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/test_tools/test_freeze.py", line 28 in test_freeze_simple_script File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/unittest/case.py", line 589 in _callTestMethod File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/unittest/case.py", line 634 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/unittest/case.py", line 690 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/unittest/runner.py", line 240 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/support/__init__.py", line 1115 in _run_suite File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/support/__init__.py", line 1241 in run_unittest File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 294 in _test_module File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 330 in _runtest_inner2 File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 373 in _runtest_inner File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 248 in _runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 278 in runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 803 in _main File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 758 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 822 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/__main__.py", line 2 in <module> File "<frozen runpy>", line 88 in _run_code File "<frozen runpy>", line 198 in _run_module_as_main make: *** [Makefile:2025: buildbottest] Error 1 Cannot open file '/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/test-results.xml' for upload Test report =========== Failed tests: - test_tools Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/545/builds/4185 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-z Build Reason: <unknown> Blamelist: Alex Waygood <Alex.Waygood(a)Gmail.com>, Ammar Askar <ammar(a)ammaraskar.com>, Barney Gale <barney.gale(a)gmail.com>, Bart Skowron <bart(a)bxsx.dev>, Brandt Bucher <brandtbucher(a)microsoft.com>, CF Bolz-Tereick <cfbolz(a)gmx.de>, Charlie Zhao <zhaoyu_hit(a)qq.com>, Chris Brett <chrisbrett665(a)gmail.com>, Daniele Procida <daniele(a)vurt.org>, Dennis Sweeney <36520290+sweeneyde(a)users.noreply.github.com>, Dong-hee Na <donghee.na(a)python.org>, Eric Snow <ericsnowcurrently(a)gmail.com>, Erlend E. Aasland <erlend(a)python.org>, Gilles Bassière <gbassiere(a)gmail.com>, Grant Ramsay <grant.ramsay(a)hotmail.com>, Gregory P. Smith <greg(a)krypto.org>, Grigoriev Semyon <33061489+grigoriev-semyon(a)users.noreply.github.com>, Guido van Rossum <guido(a)python.org>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, Inada Naoki <songofacandy(a)gmail.com>, Irit Katriel <1055913+iritkatriel(a)users.noreply.github.com>, J. Nick Koston <nick(a)koston.org>, Jack Nelson <jack(a)jacknelson.xyz>, Jakub Červinka <cervinka.jakub.19 89(a)gmail.com>, James Hilton-Balfe <gobot1234yt(a)gmail.com>, Jason R. Coombs <jaraco(a)jaraco.com>, Jean-Baptiste Poupon <faltad(a)gmail.com>, Jim Porter <826865+jimporter(a)users.noreply.github.com>, Jocelyn Castellano <admin(a)malwarefight.gq>, Jochem Boersma <jochem.boersma(a)witteveenbos.com>, Joe Kaufeld <opensource(a)joekaufeld.com>, Kevin Diem <kg.diem(a)gmail.com>, Kirill Podoprigora <kirill.bast9(a)mail.ru>, Lukas van de Wiel <30800501+LukasvdWiel(a)users.noreply.github.com>, Makonede <61922615+Makonede(a)users.noreply.github.com>, Mario Corchero <mcorcherojim(a)bloomberg.net>, Mark Shannon <mark(a)hotpy.org>, Mathieu Dupuy <deronnax(a)gmail.com>, Matthieu Caneill <matthieucan(a)users.noreply.github.com>, Menelaos Kotoglou <contact(a)menelaoskotoglou.com>, Moritz Neeb <nt4u(a)kpvn.de>, Ned Batchelder <ned(a)nedbatchelder.com>, Nikita Sobolev <mail(a)sobolevn.me>, Oliver Rew <12968411+oliver-rew(a)users.noreply.github.com>, Pieter Eendebak <pieter.eendebak(a)gmail.com>, Prince Roshan <princekrroshan01(a)gmail.com>, Ra ymond Hettinger <rhettinger(a)users.noreply.github.com>, Sebastiaan Zeeff <33516116+SebastiaanZ(a)users.noreply.github.com>, Serhiy Storchaka <storchaka(a)gmail.com>, Simone Rubino <daemo00(a)gmail.com>, Steve Dower <steve.dower(a)python.org>, Sven Arends <88426829+picnic-sven(a)users.noreply.github.com>, Terry Jan Reedy <tjreedy(a)udel.edu>, Tian Gao <gaogaotiantian(a)hotmail.com>, Tomas R <tomas.roun8(a)gmail.com>, Victor Stinner <vstinner(a)python.org>, Yonatan Bitton <bityob(a)gmail.com>, Zach Brantmeier <brantmeierz(a)gmail.com>, htsedebenham <31847376+htsedebenham(a)users.noreply.github.com>, littlebutt's workshop <luogan199686(a)gmail.com>, qqwqqw689 <114795525+qqwqqw689(a)users.noreply.github.com>, wulmer <wulmer(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Tests result: FAILURE then FAILURE == 428 tests OK. 10 slowest tests: - test_concurrent_futures: 2 min 18 sec - test_multiprocessing_spawn: 1 min 49 sec - test_multiprocessing_forkserver: 1 min 18 sec - test_signal: 1 min 16 sec - test_multiprocessing_fork: 1 min 10 sec - test_socket: 42.7 sec - test_io: 34.8 sec - test_imaplib: 31.8 sec - test_math: 31.0 sec - test_subprocess: 29.9 sec 1 test failed: test.test_asyncio.test_subprocess 17 tests skipped: test.test_asyncio.test_windows_events test.test_asyncio.test_windows_utils test_devpoll test_gdb test_ioctl test_kqueue test_launcher test_perf_profiler test_readline test_startfile test_tkinter test_ttk test_winconsoleio test_winreg test_winsound test_wmi test_zipfile64 2 re-run tests: test.test_asyncio.test_subprocess test_tools 1 test run no tests: test_tools Total duration: 15 min 2 sec Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/test_asyncio/test_subprocess.py", line 788, in test_subprocess_consistent_callbacks self.loop.run_until_complete(main()) File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/asyncio/base_events.py", line 664, in run_until_complete return future.result() ^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/test_asyncio/test_subprocess.py", line 780, in main self.assertEqual(events, [ AssertionError: Lists differ: ['process_exited', ('pipe_data_received', 1, b'stdout')] != [('pipe_data_received', 1, b'stdout'), ('p[95 chars]ted'] Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/test_asyncio/test_subprocess.py", line 788, in test_subprocess_consistent_callbacks self.loop.run_until_complete(main()) File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/asyncio/base_events.py", line 664, in run_until_complete return future.result() ^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/test_asyncio/test_subprocess.py", line 780, in main self.assertEqual(events, [ AssertionError: Lists differ: [('pi[29 chars]t'), 'pipe_connection_lost', ('pipe_data_recei[57 chars]ted'] != [('pi[29 chars]t'), ('pipe_data_received', 2, b'stderr'), 'pi[57 chars]ted'] Test report =========== Failed tests: - test.test_asyncio.test_subprocess Failed subtests: - test_subprocess_consistent_callbacks - test.test_asyncio.test_subprocess.SubprocessThreadedWatcherTests.test_subprocess_consistent_callbacks - test_subprocess_consistent_callbacks - test.test_asyncio.test_subprocess.SubprocessSafeWatcherTests.test_subprocess_consistent_callbacks Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x SLES 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/540/builds/5987 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-sles-z Build Reason: <unknown> Blamelist: Alex Waygood <Alex.Waygood(a)Gmail.com>, Ammar Askar <ammar(a)ammaraskar.com>, Barney Gale <barney.gale(a)gmail.com>, Bart Skowron <bart(a)bxsx.dev>, Brandt Bucher <brandtbucher(a)microsoft.com>, CF Bolz-Tereick <cfbolz(a)gmx.de>, Charlie Zhao <zhaoyu_hit(a)qq.com>, Chris Brett <chrisbrett665(a)gmail.com>, Daniele Procida <daniele(a)vurt.org>, Dennis Sweeney <36520290+sweeneyde(a)users.noreply.github.com>, Dong-hee Na <donghee.na(a)python.org>, Eric Snow <ericsnowcurrently(a)gmail.com>, Erlend E. Aasland <erlend(a)python.org>, Gilles Bassière <gbassiere(a)gmail.com>, Grant Ramsay <grant.ramsay(a)hotmail.com>, Gregory P. Smith <greg(a)krypto.org>, Grigoriev Semyon <33061489+grigoriev-semyon(a)users.noreply.github.com>, Guido van Rossum <guido(a)python.org>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, Inada Naoki <songofacandy(a)gmail.com>, Irit Katriel <1055913+iritkatriel(a)users.noreply.github.com>, J. Nick Koston <nick(a)koston.org>, Jack Nelson <jack(a)jacknelson.xyz>, Jakub Červinka <cervinka.jakub.19 89(a)gmail.com>, James Hilton-Balfe <gobot1234yt(a)gmail.com>, Jason R. Coombs <jaraco(a)jaraco.com>, Jean-Baptiste Poupon <faltad(a)gmail.com>, Jim Porter <826865+jimporter(a)users.noreply.github.com>, Jocelyn Castellano <admin(a)malwarefight.gq>, Jochem Boersma <jochem.boersma(a)witteveenbos.com>, Joe Kaufeld <opensource(a)joekaufeld.com>, Kevin Diem <kg.diem(a)gmail.com>, Kirill Podoprigora <kirill.bast9(a)mail.ru>, Lukas van de Wiel <30800501+LukasvdWiel(a)users.noreply.github.com>, Makonede <61922615+Makonede(a)users.noreply.github.com>, Mario Corchero <mcorcherojim(a)bloomberg.net>, Mark Shannon <mark(a)hotpy.org>, Mathieu Dupuy <deronnax(a)gmail.com>, Matthieu Caneill <matthieucan(a)users.noreply.github.com>, Menelaos Kotoglou <contact(a)menelaoskotoglou.com>, Moritz Neeb <nt4u(a)kpvn.de>, Ned Batchelder <ned(a)nedbatchelder.com>, Nikita Sobolev <mail(a)sobolevn.me>, Oliver Rew <12968411+oliver-rew(a)users.noreply.github.com>, Pieter Eendebak <pieter.eendebak(a)gmail.com>, Prince Roshan <princekrroshan01(a)gmail.com>, Ra ymond Hettinger <rhettinger(a)users.noreply.github.com>, Sebastiaan Zeeff <33516116+SebastiaanZ(a)users.noreply.github.com>, Serhiy Storchaka <storchaka(a)gmail.com>, Simone Rubino <daemo00(a)gmail.com>, Steve Dower <steve.dower(a)python.org>, Sven Arends <88426829+picnic-sven(a)users.noreply.github.com>, Terry Jan Reedy <tjreedy(a)udel.edu>, Tian Gao <gaogaotiantian(a)hotmail.com>, Tomas R <tomas.roun8(a)gmail.com>, Victor Stinner <vstinner(a)python.org>, Yonatan Bitton <bityob(a)gmail.com>, Zach Brantmeier <brantmeierz(a)gmail.com>, htsedebenham <31847376+htsedebenham(a)users.noreply.github.com>, littlebutt's workshop <luogan199686(a)gmail.com>, qqwqqw689 <114795525+qqwqqw689(a)users.noreply.github.com>, wulmer <wulmer(a)users.noreply.github.com> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-sles-z/build/Lib/test/test_asyncio/test_subprocess.py", line 788, in test_subprocess_consistent_callbacks self.loop.run_until_complete(main()) File "/home/dje/cpython-buildarea/3.x.edelsohn-sles-z/build/Lib/asyncio/base_events.py", line 664, in run_until_complete return future.result() ^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-sles-z/build/Lib/test/test_asyncio/test_subprocess.py", line 780, in main self.assertEqual(events, [ AssertionError: Lists differ: [('pi[29 chars]t'), 'pipe_connection_lost', ('pipe_data_recei[57 chars]ted'] != [('pi[29 chars]t'), ('pipe_data_received', 2, b'stderr'), 'pi[57 chars]ted'] Test report =========== Failed tests: - test_capi - test.test_asyncio.test_subprocess Failed subtests: - test_subprocess_consistent_callbacks - test.test_asyncio.test_subprocess.SubprocessThreadedWatcherTests.test_subprocess_consistent_callbacks Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) (main)
by buildbot＠python.org 23 Jul '23

23 Jul '23

The Buildbot has detected a new failure on builder x86-64 macOS 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/366/builds/4893 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: billenstein-macos Build Reason: <unknown> Blamelist: Dong-hee Na <donghee.na(a)python.org>, Serhiy Storchaka <storchaka(a)gmail.com>, TommyUnreal <45427816+TommyUnreal(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Tests result: FAILURE then FAILURE == 424 tests OK. 10 slowest tests: - test_math: 4 min - test_multiprocessing_spawn: 3 min 59 sec - test_signal: 3 min 55 sec - test_concurrent_futures: 3 min 9 sec - test_multiprocessing_forkserver: 2 min 9 sec - test_capi: 1 min 57 sec - test_tokenize: 1 min 50 sec - test_unparse: 1 min 41 sec - test_tarfile: 1 min 18 sec - test_unicodedata: 1 min 14 sec 1 test failed: test.test_asyncio.test_ssl 22 tests skipped: test.test_asyncio.test_windows_events test.test_asyncio.test_windows_utils test_devpoll test_epoll test_gdb test_idle test_ioctl test_launcher test_multiprocessing_fork test_perf_profiler test_perfmaps test_startfile test_tcl test_tkinter test_ttk test_ttk_textonly test_turtle test_winconsoleio test_winreg test_winsound test_wmi test_zipfile64 1 re-run test: test.test_asyncio.test_ssl Total duration: 31 min 5 sec Captured traceback ================== Traceback (most recent call last): File "/Users/buildbot/buildarea/3.x.billenstein-macos/build/Lib/test/test_asyncio/test_ssl.py", line 454, in test_create_connection_ssl_failed_certificate self.loop.run_until_complete(client(srv.addr)) File "/Users/buildbot/buildarea/3.x.billenstein-macos/build/Lib/asyncio/base_events.py", line 664, in run_until_complete return future.result() ^^^^^^^^^^^^^^^ File "/Users/buildbot/buildarea/3.x.billenstein-macos/build/Lib/test/test_asyncio/test_ssl.py", line 441, in client reader, writer = await asyncio.open_connection( ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/Users/buildbot/buildarea/3.x.billenstein-macos/build/Lib/asyncio/streams.py", line 47, in open_connection transport, _ = await loop.create_connection( ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/Users/buildbot/buildarea/3.x.billenstein-macos/build/Lib/asyncio/base_events.py", line 1126, in create_connection transport, protocol = await self._create_connection_transport( ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/Users/buildbot/buildarea/3.x.billenstein-macos/build/Lib/asyncio/base_events.py", line 1159, in _create_connection_transport await waiter File "/Users/buildbot/buildarea/3.x.billenstein-macos/build/Lib/asyncio/sslproto.py", line 575, in _on_handshake_complete raise handshake_exc File "/Users/buildbot/buildarea/3.x.billenstein-macos/build/Lib/asyncio/sslproto.py", line 557, in _do_handshake self._sslobj.do_handshake() File "/Users/buildbot/buildarea/3.x.billenstein-macos/build/Lib/ssl.py", line 917, in do_handshake self._sslobj.do_handshake() ssl.SSLError: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:1024) Test report =========== Failed tests: - test.test_asyncio.test_ssl Failed subtests: - test_create_connection_ssl_failed_certificate - test.test_asyncio.test_ssl.TestSSL.test_create_connection_ssl_failed_certificate Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Debian 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/49/builds/6022 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-debian-z Build Reason: <unknown> Blamelist: Alex Waygood <Alex.Waygood(a)Gmail.com>, Ammar Askar <ammar(a)ammaraskar.com>, Barney Gale <barney.gale(a)gmail.com>, Bart Skowron <bart(a)bxsx.dev>, Brandt Bucher <brandtbucher(a)microsoft.com>, CF Bolz-Tereick <cfbolz(a)gmx.de>, Charlie Zhao <zhaoyu_hit(a)qq.com>, Chris Brett <chrisbrett665(a)gmail.com>, Daniele Procida <daniele(a)vurt.org>, Dennis Sweeney <36520290+sweeneyde(a)users.noreply.github.com>, Dong-hee Na <donghee.na(a)python.org>, Eric Snow <ericsnowcurrently(a)gmail.com>, Erlend E. Aasland <erlend(a)python.org>, Gilles Bassière <gbassiere(a)gmail.com>, Grant Ramsay <grant.ramsay(a)hotmail.com>, Gregory P. Smith <greg(a)krypto.org>, Grigoriev Semyon <33061489+grigoriev-semyon(a)users.noreply.github.com>, Guido van Rossum <guido(a)python.org>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, Inada Naoki <songofacandy(a)gmail.com>, Irit Katriel <1055913+iritkatriel(a)users.noreply.github.com>, J. Nick Koston <nick(a)koston.org>, Jack Nelson <jack(a)jacknelson.xyz>, Jakub Červinka <cervinka.jakub.19 89(a)gmail.com>, James Hilton-Balfe <gobot1234yt(a)gmail.com>, Jason R. Coombs <jaraco(a)jaraco.com>, Jean-Baptiste Poupon <faltad(a)gmail.com>, Jim Porter <826865+jimporter(a)users.noreply.github.com>, Jocelyn Castellano <admin(a)malwarefight.gq>, Jochem Boersma <jochem.boersma(a)witteveenbos.com>, Joe Kaufeld <opensource(a)joekaufeld.com>, Kevin Diem <kg.diem(a)gmail.com>, Kirill Podoprigora <kirill.bast9(a)mail.ru>, Lukas van de Wiel <30800501+LukasvdWiel(a)users.noreply.github.com>, Makonede <61922615+Makonede(a)users.noreply.github.com>, Mario Corchero <mcorcherojim(a)bloomberg.net>, Mark Shannon <mark(a)hotpy.org>, Mathieu Dupuy <deronnax(a)gmail.com>, Matthieu Caneill <matthieucan(a)users.noreply.github.com>, Menelaos Kotoglou <contact(a)menelaoskotoglou.com>, Moritz Neeb <nt4u(a)kpvn.de>, Ned Batchelder <ned(a)nedbatchelder.com>, Nikita Sobolev <mail(a)sobolevn.me>, Oliver Rew <12968411+oliver-rew(a)users.noreply.github.com>, Pieter Eendebak <pieter.eendebak(a)gmail.com>, Prince Roshan <princekrroshan01(a)gmail.com>, Ra ymond Hettinger <rhettinger(a)users.noreply.github.com>, Sebastiaan Zeeff <33516116+SebastiaanZ(a)users.noreply.github.com>, Serhiy Storchaka <storchaka(a)gmail.com>, Simone Rubino <daemo00(a)gmail.com>, Steve Dower <steve.dower(a)python.org>, Sven Arends <88426829+picnic-sven(a)users.noreply.github.com>, Terry Jan Reedy <tjreedy(a)udel.edu>, Tian Gao <gaogaotiantian(a)hotmail.com>, Tomas R <tomas.roun8(a)gmail.com>, TommyUnreal <45427816+TommyUnreal(a)users.noreply.github.com>, Victor Stinner <vstinner(a)python.org>, Yonatan Bitton <bityob(a)gmail.com>, Zach Brantmeier <brantmeierz(a)gmail.com>, htsedebenham <31847376+htsedebenham(a)users.noreply.github.com>, littlebutt's workshop <luogan199686(a)gmail.com>, qqwqqw689 <114795525+qqwqqw689(a)users.noreply.github.com>, wulmer <wulmer(a)users.noreply.github.com> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 42, done. remote: Counting objects: 3% (1/33) remote: Counting objects: 6% (2/33) remote: Counting objects: 9% (3/33) remote: Counting objects: 12% (4/33) remote: Counting objects: 15% (5/33) remote: Counting objects: 18% (6/33) remote: Counting objects: 21% (7/33) remote: Counting objects: 24% (8/33) remote: Counting objects: 27% (9/33) remote: Counting objects: 30% (10/33) remote: Counting objects: 33% (11/33) remote: Counting objects: 36% (12/33) remote: Counting objects: 39% (13/33) remote: Counting objects: 42% (14/33) remote: Counting objects: 45% (15/33) remote: Counting objects: 48% (16/33) remote: Counting objects: 51% (17/33) remote: Counting objects: 54% (18/33) remote: Counting objects: 57% (19/33) remote: Counting objects: 60% (20/33) remote: Counting objects: 63% (21/33) remote: Counting objects: 66% (22/33) remote: Counting objects: 69% (23/33) remote: Counting objects: 72% (24/33) remote: Counting objects: 75% (25/33) remote: Counting objects: 78% (26/33) remote: Counting objects: 81% (27/33) remote: Counting objects: 84% (28/33) remote: Counting objects: 87% (29/33) remote: Counting objects: 90% (30/33) remote: Counting objects: 93% (31/33) remote: Counting objects: 96% (32/33) remote: Counting objects: 100% (33/33) remote: Counting objects: 100% (33/33), done. remote: Compressing objects: 5% (1/19) remote: Compressing objects: 10% (2/19) remote: Compressing objects: 15% (3/19) remote: Compressing objects: 21% (4/19) remote: Compressing objects: 26% (5/19) remote: Compressing objects: 31% (6/19) remote: Compressing objects: 36% (7/19) remote: Compressing objects: 42% (8/19) remote: Compressing objects: 47% (9/19) remote: Compressing objects: 52% (10/19) remote: Compressing objects: 57% (11/19) remote: Compressing objects: 63% (12/19) remote: Compressing objects: 68% (13/19) remote: Compressing objects: 73% (14/19) remote: Compressing objects: 78% (15/19) remote: Compressing objects: 84% (16/19) remote: Compressing objects: 89% (17/19) remote: Compressing objects: 94% (18/19) remote: Compressing objects: 100% (19/19) remote: Compressing objects: 100% (19/19), done. remote: Total 42 (delta 17), reused 17 (delta 14), pack-reused 9 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'b273837fea129df8477da557ad3cb23a0ed12c20'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at b273837fea gh-107122: Add clear method to dbm.gdbm.module (gh-107127) Switched to and reset branch 'main' python: Python/instrumentation.c:262: _PyInstruction_GetLength: Assertion `opcode != 0' failed. Fatal Python error: Aborted Current thread 0x000003ff80477fb0 (most recent call first): File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/test/test_capi/test_misc.py", line 2441 in get_first_executor File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/test/test_capi/test_misc.py", line 2570 in test_pop_jump_if_not_none File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/unittest/case.py", line 589 in _callTestMethod File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/unittest/case.py", line 634 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/unittest/case.py", line 690 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/unittest/runner.py", line 240 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/test/support/__init__.py", line 1115 in _run_suite File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/test/support/__init__.py", line 1241 in run_unittest File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/test/libregrtest/runtest.py", line 294 in _test_module File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/test/libregrtest/runtest.py", line 330 in _runtest_inner2 File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/test/libregrtest/runtest.py", line 373 in _runtest_inner File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/test/libregrtest/runtest.py", line 248 in _runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/test/libregrtest/runtest.py", line 278 in runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/test/libregrtest/main.py", line 803 in _main File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/test/libregrtest/main.py", line 758 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/test/libregrtest/main.py", line 822 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/test/__main__.py", line 2 in <module> File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/runpy.py", line 88 in _run_code File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/runpy.py", line 198 in _run_module_as_main Extension modules: _testcapi, _testmultiphase, _testsinglephase, _xxsubinterpreters, _testinternalcapi (total: 5) Aborted make: *** [Makefile:2023: buildbottest] Error 134 Cannot open file '/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/test-results.xml' for upload Test report =========== Failed tests: - test_capi Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) uploading test-results.xml (failure) (main)
by buildbot＠python.org 23 Jul '23

23 Jul '23

The Buildbot has detected a new failure on builder s390x RHEL8 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/509/builds/4587 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-rhel8-z Build Reason: <unknown> Blamelist: Alex Waygood <Alex.Waygood(a)Gmail.com>, Ammar Askar <ammar(a)ammaraskar.com>, Barney Gale <barney.gale(a)gmail.com>, Bart Skowron <bart(a)bxsx.dev>, Brandt Bucher <brandtbucher(a)microsoft.com>, CF Bolz-Tereick <cfbolz(a)gmx.de>, Charlie Zhao <zhaoyu_hit(a)qq.com>, Chris Brett <chrisbrett665(a)gmail.com>, Daniele Procida <daniele(a)vurt.org>, Dennis Sweeney <36520290+sweeneyde(a)users.noreply.github.com>, Dong-hee Na <donghee.na(a)python.org>, Eric Snow <ericsnowcurrently(a)gmail.com>, Erlend E. Aasland <erlend(a)python.org>, Grant Ramsay <grant.ramsay(a)hotmail.com>, Gregory P. Smith <greg(a)krypto.org>, Grigoriev Semyon <33061489+grigoriev-semyon(a)users.noreply.github.com>, Guido van Rossum <guido(a)python.org>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, Ijtaba Hussain <ijtabahussain(a)live.com>, Inada Naoki <songofacandy(a)gmail.com>, Irit Katriel <1055913+iritkatriel(a)users.noreply.github.com>, J. Nick Koston <nick(a)koston.org>, Jack Nelson <jack(a)jacknelson.xyz>, James Hilton-Balfe <gobot1234yt@g mail.com>, Jason R. Coombs <jaraco(a)jaraco.com>, Jean-Baptiste Poupon <faltad(a)gmail.com>, Jim Porter <826865+jimporter(a)users.noreply.github.com>, Jocelyn Castellano <admin(a)malwarefight.gq>, Jochem Boersma <jochem.boersma(a)witteveenbos.com>, Joe Kaufeld <opensource(a)joekaufeld.com>, Kevin Diem <kg.diem(a)gmail.com>, Kirill Podoprigora <kirill.bast9(a)mail.ru>, Lukas van de Wiel <30800501+LukasvdWiel(a)users.noreply.github.com>, Makonede <61922615+Makonede(a)users.noreply.github.com>, Mario Corchero <mcorcherojim(a)bloomberg.net>, Mariusz Felisiak <felisiak.mariusz(a)gmail.com>, Mark Shannon <mark(a)hotpy.org>, Mathieu Dupuy <deronnax(a)gmail.com>, Matthieu Caneill <matthieucan(a)users.noreply.github.com>, Menelaos Kotoglou <contact(a)menelaoskotoglou.com>, Moritz Neeb <nt4u(a)kpvn.de>, Ned Batchelder <ned(a)nedbatchelder.com>, Nikita Sobolev <mail(a)sobolevn.me>, Oliver Rew <12968411+oliver-rew(a)users.noreply.github.com>, Pablo Galindo Salgado <Pablogsal(a)gmail.com>, Pieter Eendebak <pieter.eendebak(a)gmail.com>, Pr ince Roshan <princekrroshan01(a)gmail.com>, Raymond Hettinger <rhettinger(a)users.noreply.github.com>, Sebastiaan Zeeff <33516116+SebastiaanZ(a)users.noreply.github.com>, Serhiy Storchaka <storchaka(a)gmail.com>, Simone Rubino <daemo00(a)gmail.com>, Steve Dower <steve.dower(a)python.org>, Sven Arends <88426829+picnic-sven(a)users.noreply.github.com>, Terry Jan Reedy <tjreedy(a)udel.edu>, Tian Gao <gaogaotiantian(a)hotmail.com>, Victor Stinner <vstinner(a)python.org>, Yonatan Bitton <bityob(a)gmail.com>, Zach Brantmeier <brantmeierz(a)gmail.com>, littlebutt's workshop <luogan199686(a)gmail.com>, qqwqqw689 <114795525+qqwqqw689(a)users.noreply.github.com>, wulmer <wulmer(a)users.noreply.github.com> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 18, done. remote: Counting objects: 5% (1/18) remote: Counting objects: 11% (2/18) remote: Counting objects: 16% (3/18) remote: Counting objects: 22% (4/18) remote: Counting objects: 27% (5/18) remote: Counting objects: 33% (6/18) remote: Counting objects: 38% (7/18) remote: Counting objects: 44% (8/18) remote: Counting objects: 50% (9/18) remote: Counting objects: 55% (10/18) remote: Counting objects: 61% (11/18) remote: Counting objects: 66% (12/18) remote: Counting objects: 72% (13/18) remote: Counting objects: 77% (14/18) remote: Counting objects: 83% (15/18) remote: Counting objects: 88% (16/18) remote: Counting objects: 94% (17/18) remote: Counting objects: 100% (18/18) remote: Counting objects: 100% (18/18), done. remote: Compressing objects: 10% (1/10) remote: Compressing objects: 20% (2/10) remote: Compressing objects: 30% (3/10) remote: Compressing objects: 40% (4/10) remote: Compressing objects: 50% (5/10) remote: Compressing objects: 60% (6/10) remote: Compressing objects: 70% (7/10) remote: Compressing objects: 80% (8/10) remote: Compressing objects: 90% (9/10) remote: Compressing objects: 100% (10/10) remote: Compressing objects: 100% (10/10), done. remote: Total 10 (delta 8), reused 1 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to '9eeb4b485f4f9e13e5cb638e43a0baecb3ff4e86'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 9eeb4b485f gh-82500: Fix asyncio sendfile overflow on 32bit (#107056) Switched to and reset branch 'main' python: Python/instrumentation.c:262: _PyInstruction_GetLength: Assertion `opcode != 0' failed. Fatal Python error: Aborted Current thread 0x000003ffbbe77730 (most recent call first): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/test/test_capi/test_misc.py", line 2441 in get_first_executor File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/test/test_capi/test_misc.py", line 2570 in test_pop_jump_if_not_none File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/unittest/case.py", line 589 in _callTestMethod File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/unittest/case.py", line 634 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/unittest/case.py", line 690 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/unittest/runner.py", line 240 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/test/support/__init__.py", line 1115 in _run_suite File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/test/support/__init__.py", line 1241 in run_unittest File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/test/libregrtest/runtest.py", line 294 in _test_module File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/test/libregrtest/runtest.py", line 330 in _runtest_inner2 File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/test/libregrtest/runtest.py", line 373 in _runtest_inner File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/test/libregrtest/runtest.py", line 248 in _runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/test/libregrtest/runtest.py", line 278 in runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/test/libregrtest/main.py", line 803 in _main File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/test/libregrtest/main.py", line 758 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/test/libregrtest/main.py", line 822 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/test/__main__.py", line 2 in <module> File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/runpy.py", line 88 in _run_code File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/runpy.py", line 198 in _run_module_as_main Extension modules: _testcapi, _testmultiphase, _testsinglephase, _xxsubinterpreters, _testinternalcapi (total: 5) make: *** [Makefile:2025: buildbottest] Aborted (core dumped) Cannot open file '/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/test-results.xml' for upload Test report =========== Failed tests: - test_capi Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Debian 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/49/builds/6019 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-debian-z Build Reason: <unknown> Blamelist: Alex Waygood <Alex.Waygood(a)Gmail.com>, Ammar Askar <ammar(a)ammaraskar.com>, Barney Gale <barney.gale(a)gmail.com>, Bart Skowron <bart(a)bxsx.dev>, Brandt Bucher <brandtbucher(a)microsoft.com>, CF Bolz-Tereick <cfbolz(a)gmx.de>, Charlie Zhao <zhaoyu_hit(a)qq.com>, Chris Brett <chrisbrett665(a)gmail.com>, Daniele Procida <daniele(a)vurt.org>, Dennis Sweeney <36520290+sweeneyde(a)users.noreply.github.com>, Dong-hee Na <donghee.na(a)python.org>, Eric Snow <ericsnowcurrently(a)gmail.com>, Erlend E. Aasland <erlend(a)python.org>, Grant Ramsay <grant.ramsay(a)hotmail.com>, Gregory P. Smith <greg(a)krypto.org>, Grigoriev Semyon <33061489+grigoriev-semyon(a)users.noreply.github.com>, Guido van Rossum <guido(a)python.org>, Hugo van Kemenade <hugovk(a)users.noreply.github.com>, Ijtaba Hussain <ijtabahussain(a)live.com>, Inada Naoki <songofacandy(a)gmail.com>, Irit Katriel <1055913+iritkatriel(a)users.noreply.github.com>, J. Nick Koston <nick(a)koston.org>, Jack Nelson <jack(a)jacknelson.xyz>, James Hilton-Balfe <gobot1234yt@g mail.com>, Jason R. Coombs <jaraco(a)jaraco.com>, Jean-Baptiste Poupon <faltad(a)gmail.com>, Jim Porter <826865+jimporter(a)users.noreply.github.com>, Jocelyn Castellano <admin(a)malwarefight.gq>, Jochem Boersma <jochem.boersma(a)witteveenbos.com>, Joe Kaufeld <opensource(a)joekaufeld.com>, Kevin Diem <kg.diem(a)gmail.com>, Kirill Podoprigora <kirill.bast9(a)mail.ru>, Lukas van de Wiel <30800501+LukasvdWiel(a)users.noreply.github.com>, Makonede <61922615+Makonede(a)users.noreply.github.com>, Mario Corchero <mcorcherojim(a)bloomberg.net>, Mariusz Felisiak <felisiak.mariusz(a)gmail.com>, Mark Shannon <mark(a)hotpy.org>, Mathieu Dupuy <deronnax(a)gmail.com>, Matthieu Caneill <matthieucan(a)users.noreply.github.com>, Menelaos Kotoglou <contact(a)menelaoskotoglou.com>, Moritz Neeb <nt4u(a)kpvn.de>, Ned Batchelder <ned(a)nedbatchelder.com>, Nikita Sobolev <mail(a)sobolevn.me>, Oliver Rew <12968411+oliver-rew(a)users.noreply.github.com>, Pablo Galindo Salgado <Pablogsal(a)gmail.com>, Pieter Eendebak <pieter.eendebak(a)gmail.com>, Pr ince Roshan <princekrroshan01(a)gmail.com>, Raymond Hettinger <rhettinger(a)users.noreply.github.com>, Sebastiaan Zeeff <33516116+SebastiaanZ(a)users.noreply.github.com>, Serhiy Storchaka <storchaka(a)gmail.com>, Simone Rubino <daemo00(a)gmail.com>, Steve Dower <steve.dower(a)python.org>, Sven Arends <88426829+picnic-sven(a)users.noreply.github.com>, Terry Jan Reedy <tjreedy(a)udel.edu>, Tian Gao <gaogaotiantian(a)hotmail.com>, Victor Stinner <vstinner(a)python.org>, Yonatan Bitton <bityob(a)gmail.com>, Zach Brantmeier <brantmeierz(a)gmail.com>, littlebutt's workshop <luogan199686(a)gmail.com>, qqwqqw689 <114795525+qqwqqw689(a)users.noreply.github.com>, wulmer <wulmer(a)users.noreply.github.com> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 18, done. remote: Counting objects: 5% (1/18) remote: Counting objects: 11% (2/18) remote: Counting objects: 16% (3/18) remote: Counting objects: 22% (4/18) remote: Counting objects: 27% (5/18) remote: Counting objects: 33% (6/18) remote: Counting objects: 38% (7/18) remote: Counting objects: 44% (8/18) remote: Counting objects: 50% (9/18) remote: Counting objects: 55% (10/18) remote: Counting objects: 61% (11/18) remote: Counting objects: 66% (12/18) remote: Counting objects: 72% (13/18) remote: Counting objects: 77% (14/18) remote: Counting objects: 83% (15/18) remote: Counting objects: 88% (16/18) remote: Counting objects: 94% (17/18) remote: Counting objects: 100% (18/18) remote: Counting objects: 100% (18/18), done. remote: Compressing objects: 10% (1/10) remote: Compressing objects: 20% (2/10) remote: Compressing objects: 30% (3/10) remote: Compressing objects: 40% (4/10) remote: Compressing objects: 50% (5/10) remote: Compressing objects: 60% (6/10) remote: Compressing objects: 70% (7/10) remote: Compressing objects: 80% (8/10) remote: Compressing objects: 90% (9/10) remote: Compressing objects: 100% (10/10) remote: Compressing objects: 100% (10/10), done. remote: Total 10 (delta 8), reused 1 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to '9eeb4b485f4f9e13e5cb638e43a0baecb3ff4e86'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 9eeb4b485f gh-82500: Fix asyncio sendfile overflow on 32bit (#107056) Switched to and reset branch 'main' python: Python/instrumentation.c:262: _PyInstruction_GetLength: Assertion `opcode != 0' failed. Fatal Python error: Aborted Current thread 0x000003ffba8f7fb0 (most recent call first): File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/test/test_capi/test_misc.py", line 2441 in get_first_executor File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/test/test_capi/test_misc.py", line 2570 in test_pop_jump_if_not_none File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/unittest/case.py", line 589 in _callTestMethod File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/unittest/case.py", line 634 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/unittest/case.py", line 690 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/unittest/runner.py", line 240 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/test/support/__init__.py", line 1115 in _run_suite File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/test/support/__init__.py", line 1241 in run_unittest File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/test/libregrtest/runtest.py", line 294 in _test_module File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/test/libregrtest/runtest.py", line 330 in _runtest_inner2 File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/test/libregrtest/runtest.py", line 373 in _runtest_inner File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/test/libregrtest/runtest.py", line 248 in _runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/test/libregrtest/runtest.py", line 278 in runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/test/libregrtest/main.py", line 803 in _main File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/test/libregrtest/main.py", line 758 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/test/libregrtest/main.py", line 822 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/test/__main__.py", line 2 in <module> File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/runpy.py", line 88 in _run_code File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/runpy.py", line 198 in _run_module_as_main Extension modules: _testcapi, _testmultiphase, _testsinglephase, _xxsubinterpreters, _testinternalcapi (total: 5) Aborted make: *** [Makefile:2023: buildbottest] Error 134 Cannot open file '/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/test-results.xml' for upload Test report =========== Failed tests: - test_capi Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) (3.12)
by buildbot＠python.org 23 Jul '23

23 Jul '23

The Buildbot has detected a new failure on builder s390x Fedora LTO + PGO 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1179/builds/140 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-z Build Reason: <unknown> Blamelist: Alex Waygood <Alex.Waygood(a)Gmail.com>, Gregory P. Smith <greg(a)krypto.org>, Inada Naoki <songofacandy(a)gmail.com>, Jason R. Coombs <jaraco(a)jaraco.com>, Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com>, Serhiy Storchaka <storchaka(a)gmail.com>, Sven Arends <88426829+picnic-sven(a)users.noreply.github.com>, Victor Stinner <vstinner(a)python.org>, Yonatan Bitton <bityob(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Tests result: FAILURE then FAILURE == 445 tests OK. 10 slowest tests: - test_concurrent_futures: 2 min 16 sec - test_multiprocessing_spawn: 1 min 38 sec - test_signal: 1 min 18 sec - test_multiprocessing_forkserver: 1 min 12 sec - test_multiprocessing_fork: 1 min 6 sec - test_socket: 43.3 sec - test_imaplib: 32.1 sec - test_io: 30.9 sec - test_subprocess: 28.0 sec - test_xmlrpc: 27.6 sec 1 test failed: test.test_asyncio.test_subprocess 20 tests skipped: test.test_asyncio.test_windows_events test.test_asyncio.test_windows_utils test_devpoll test_gdb test_ioctl test_kqueue test_launcher test_msilib test_nis test_perf_profiler test_readline test_startfile test_tix test_tkinter test_ttk test_winconsoleio test_winreg test_winsound test_wmi test_zipfile64 3 re-run tests: test.test_asyncio.test_subprocess test.test_asyncio.test_unix_events test_tools 1 test run no tests: test_tools Total duration: 16 min 56 sec Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/test_asyncio/test_subprocess.py", line 788, in test_subprocess_consistent_callbacks self.loop.run_until_complete(main()) File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/asyncio/base_events.py", line 664, in run_until_complete return future.result() ^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/test_asyncio/test_subprocess.py", line 780, in main self.assertEqual(events, [ AssertionError: Lists differ: [('pi[29 chars]t'), 'pipe_connection_lost', ('pipe_data_recei[57 chars]ted'] != [('pi[29 chars]t'), ('pipe_data_received', 2, b'stderr'), 'pi[57 chars]ted'] Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/async_case.py", line 90, in _callTestMethod if self._callMaybeAsync(method) is not None: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/async_case.py", line 117, in _callMaybeAsync return self._asyncioTestContext.run(func, *args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/support/hashlib_helper.py", line 49, in wrapper return func_or_class(*args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/test_asyncio/test_unix_events.py", line 1937, in test_fork_signal_handling self.assertTrue(child_handled.is_set()) AssertionError: False is not true Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/test_asyncio/test_subprocess.py", line 788, in test_subprocess_consistent_callbacks self.loop.run_until_complete(main()) File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/asyncio/base_events.py", line 664, in run_until_complete return future.result() ^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/test_asyncio/test_subprocess.py", line 780, in main self.assertEqual(events, [ AssertionError: Lists differ: ['process_exited', ('pipe_data_received', 1, b'stdout')] != [('pipe_data_received', 1, b'stdout'), ('p[95 chars]ted'] Test report =========== Failed tests: - test.test_asyncio.test_subprocess Failed subtests: - test_subprocess_consistent_callbacks - test.test_asyncio.test_subprocess.SubprocessPidfdWatcherTests.test_subprocess_consistent_callbacks - test_fork_signal_handling - test.test_asyncio.test_unix_events.TestFork.test_fork_signal_handling - test_subprocess_consistent_callbacks - test.test_asyncio.test_subprocess.SubprocessThreadedWatcherTests.test_subprocess_consistent_callbacks Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Arch Linux TraceRefs 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1197/builds/149 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: pablogsal-arch-x86_64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com>, Sven Arends <88426829+picnic-sven(a)users.noreply.github.com>, Victor Stinner <vstinner(a)python.org> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 70, done. remote: Counting objects: 1% (1/65) remote: Counting objects: 3% (2/65) remote: Counting objects: 4% (3/65) remote: Counting objects: 6% (4/65) remote: Counting objects: 7% (5/65) remote: Counting objects: 9% (6/65) remote: Counting objects: 10% (7/65) remote: Counting objects: 12% (8/65) remote: Counting objects: 13% (9/65) remote: Counting objects: 15% (10/65) remote: Counting objects: 16% (11/65) remote: Counting objects: 18% (12/65) remote: Counting objects: 20% (13/65) remote: Counting objects: 21% (14/65) remote: Counting objects: 23% (15/65) remote: Counting objects: 24% (16/65) remote: Counting objects: 26% (17/65) remote: Counting objects: 27% (18/65) remote: Counting objects: 29% (19/65) remote: Counting objects: 30% (20/65) remote: Counting objects: 32% (21/65) remote: Counting objects: 33% (22/65) remote: Counting objects: 35% (23/65) remote: Counting objects: 36% (24/65) remote: Counting objects: 38% (25/65) remote: Counting objects: 40% (26/65) remote: Counting objects: 41% (27/65) remote: Counting objects: 43% (28/65) remote: Counting objects: 44% (29/65) remote: Counting objects: 46% (30/65) remote: Counting objects: 47% (31/65) remote: Counting objects: 49% (32/65) remote: Counting objects: 50% (33/65) remote: Counting objects: 52% (34/65) remote: Counting objects: 53% (35/65) remote: Counting objects: 55% (36/65) remote: Counting objects: 56% (37/65) remote: Counting objects: 58% (38/65) remote: Counting objects: 60% (39/65) remote: Counting objects: 61% (40/65) remote: Counting objects: 63% (41/65) remote: Counting objects: 64% (42/65) remote: Counting objects: 66% (43/65) remote: Counting objects: 67% (44/65) remote: Counting objects: 69% (45/65) remote: Counting objects: 70% (46/65) remote: Counting objects: 72% (47/65) remote: Counting objects: 73% (48/65) remote: Counting objects: 75% (49/65) remote: Counting objects: 76% (50/65) remote: Counting objects: 78% (51/65) remote: Counting objects: 80% (52/65) remote: Counting objects: 81% (53/65) remote: Counting objects: 83% (54/65) remote: Counting objects: 84% (55/65) remote: Counting objects: 86% (56/65) remote: Counting objects: 87% (57/65) remote: Counting objects: 89% (58/65) remote: Counting objects: 90% (59/65) remote: Counting objects: 92% (60/65) remote: Counting objects: 93% (61/65) remote: Counting objects: 95% (62/65) remote: Counting objects: 96% (63/65) remote: Counting objects: 98% (64/65) remote: Counting objects: 100% (65/65) remote: Counting objects: 100% (65/65), done. remote: Compressing objects: 2% (1/43) remote: Compressing objects: 4% (2/43) remote: Compressing objects: 6% (3/43) remote: Compressing objects: 9% (4/43) remote: Compressing objects: 11% (5/43) remote: Compressing objects: 13% (6/43) remote: Compressing objects: 16% (7/43) remote: Compressing objects: 18% (8/43) remote: Compressing objects: 20% (9/43) remote: Compressing objects: 23% (10/43) remote: Compressing objects: 25% (11/43) remote: Compressing objects: 27% (12/43) remote: Compressing objects: 30% (13/43) remote: Compressing objects: 32% (14/43) remote: Compressing objects: 34% (15/43) remote: Compressing objects: 37% (16/43) remote: Compressing objects: 39% (17/43) remote: Compressing objects: 41% (18/43) remote: Compressing objects: 44% (19/43) remote: Compressing objects: 46% (20/43) remote: Compressing objects: 48% (21/43) remote: Compressing objects: 51% (22/43) remote: Compressing objects: 53% (23/43) remote: Compressing objects: 55% (24/43) remote: Compressing objects: 58% (25/43) remote: Compressing objects: 60% (26/43) remote: Compressing objects: 62% (27/43) remote: Compressing objects: 65% (28/43) remote: Compressing objects: 67% (29/43) remote: Compressing objects: 69% (30/43) remote: Compressing objects: 72% (31/43) remote: Compressing objects: 74% (32/43) remote: Compressing objects: 76% (33/43) remote: Compressing objects: 79% (34/43) remote: Compressing objects: 81% (35/43) remote: Compressing objects: 83% (36/43) remote: Compressing objects: 86% (37/43) remote: Compressing objects: 88% (38/43) remote: Compressing objects: 90% (39/43) remote: Compressing objects: 93% (40/43) remote: Compressing objects: 95% (41/43) remote: Compressing objects: 97% (42/43) remote: Compressing objects: 100% (43/43) remote: Compressing objects: 100% (43/43), done. remote: Total 70 (delta 27), reused 38 (delta 21), pack-reused 5 From https://github.com/python/cpython * branch 3.12 -> FETCH_HEAD Note: switching to 'd87d67b9e65c38dd6d1d378a5c013eccf50756f1'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at d87d67b9e6 [3.12] gh-106962: Detect mpicc in configure.ac (GH-106961) (#107081) Switched to and reset branch '3.12' Objects/object.c:2212: _Py_ForgetReference: Assertion failed: invalid object chain Enable tracemalloc to get the memory block allocation traceback object address : 0x7f3c25ccc7c0 object refcount : 0 object type : 0x55d4ad416960 object type name: float object repr : <refcnt 0 at 0x7f3c25ccc7c0> Fatal Python error: _PyObject_AssertFailed: _PyObject_AssertFailed Python runtime state: initialized Thread 0x00007f3c35f036c0 (most recent call first): File "<string>", line 8 in wait File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64/build/Lib/threading.py", line 989 in run File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64/build/Lib/threading.py", line 1052 in _bootstrap_inner File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64/build/Lib/threading.py", line 1009 in _bootstrap Current thread 0x00007f3c37594740 (most recent call first): File "<string>", line 18 in <module> Extension modules: _testinternalcapi (total: 1) Debug memory block at address p=0x7f3c374bde60: API '�' 18302063728033390045 bytes originally requested The 7 pad bytes at p-7 are not all FORBIDDENBYTE (0xfd): at p-7: 0xdd *** OUCH at p-6: 0xdd *** OUCH at p-5: 0xdd *** OUCH at p-4: 0xdd *** OUCH at p-3: 0xdd *** OUCH at p-2: 0xdd *** OUCH at p-1: 0xdd *** OUCH Because memory is corrupted at the start, the count of bytes requested may be bogus, and checking the trailing pad bytes may segfault. The 8 pad bytes at tail=0xfdfe7d3a3549bc3d are Fatal Python error: Segmentation fault Thread 0x00007f3c35f036c0 (most recent call first): File "<string>", line 8 in wait File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64/build/Lib/threading.py", line 989 in run File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64/build/Lib/threading.py", line 1052 in _bootstrap_inner File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64/build/Lib/threading.py", line 1009 in _bootstrap Current thread 0x00007f3c37594740 (most recent call first): File "<string>", line 18 in <module> Extension modules: _testcapi, _testmultiphase, _testsinglephase, _xxsubinterpreters, _testinternalcapi (total: 5) make: *** [Makefile:2015: buildbottest] Segmentation fault (core dumped) Cannot open file '/buildbot/buildarea/3.12.pablogsal-arch-x86_64/build/test-results.xml' for upload Test report =========== Failed tests: - test_capi Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): - failed test (failure) (9a6b278769b9f24e0650283f6c347db8ae52b7b3)
by buildbot＠python.org 22 Jul '23

22 Jul '23

The Buildbot has detected a new failure on builder s390x RHEL8 Refleaks 3.x while building Python. Full details are available at: https://buildbot.python.org/all/#/builders/75/builds/835 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-rhel8-z Build Reason: <unknown> Blamelist: BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=615678) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/resource_tracker.py:224: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=615678) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/resource_tracker.py:224: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=615678) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/resource_tracker.py:224: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=615678) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/resource_tracker.py:224: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/popen_fork.py:66: DeprecationWarning: This process (pid=615678) is multi-threaded, use of fork() may lead to deadlocks in the child. self.pid = os.fork() /home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/resource_tracker.py:224: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory . Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/test/_test_eintr.py", line 523, in test_lockf self._lock(fcntl.lockf, "lockf") File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/test/_test_eintr.py", line 515, in _lock self.assertGreaterEqual(dt, self.sleep_time) AssertionError: 0.1998293441720307 not greater than or equal to 0.2 Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/test/test_eintr.py", line 16, in test_all script_helper.run_test_script(script) File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/test/support/script_helper.py", line 302, in run_test_script assert_python_ok("-u", script, "-v") File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/test/support/script_helper.py", line 166, in assert_python_ok return _assert_python(True, *args, **env_vars) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/test/support/script_helper.py", line 151, in _assert_python res.fail(cmd_line) File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/test/support/script_helper.py", line 76, in fail raise AssertionError("Process return code is %d\n" AssertionError: Process return code is 1 command line: ['/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/python', '-X', 'faulthandler', '-I', '-u', '/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.refleak/build/Lib/test/_test_eintr.py', '-v'] Test report =========== Failed tests: - test_eintr - test_capi Failed subtests: - test_lockf - __main__.FNTLEINTRTest.test_lockf Sincerely, -The Buildbot

1 0