Mailman 3 May 2024 - Buildbot-status

☠ Buildbot (Python): python/cpython - failed test (failure) (main)
by buildbot＠python.org 20 May '24

20 May '24

The Buildbot has detected a new failure on builder AMD64 Ubuntu NoGIL 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1225/builds/2286 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: itamaro-ubuntu-aws Build Reason: <unknown> Blamelist: Barney Gale <barney.gale(a)gmail.com>, pulkin <gpulkin(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 9, done. remote: Counting objects: 11% (1/9) remote: Counting objects: 22% (2/9) remote: Counting objects: 33% (3/9) remote: Counting objects: 44% (4/9) remote: Counting objects: 55% (5/9) remote: Counting objects: 66% (6/9) remote: Counting objects: 77% (7/9) remote: Counting objects: 88% (8/9) remote: Counting objects: 100% (9/9) remote: Counting objects: 100% (9/9), done. remote: Compressing objects: 12% (1/8) remote: Compressing objects: 25% (2/8) remote: Compressing objects: 37% (3/8) remote: Compressing objects: 50% (4/8) remote: Compressing objects: 62% (5/8) remote: Compressing objects: 75% (6/8) remote: Compressing objects: 87% (7/8) remote: Compressing objects: 100% (8/8) remote: Compressing objects: 100% (8/8), done. remote: Total 9 (delta 1), reused 2 (delta 1), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to '0abf997e75bd3a8b76d920d33cc64d5e6c2d380f'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 0abf997e75 gh-119105: difflib: improve recursion for degenerate cases (#119131) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal make: *** [Makefile:2242: buildbottest] Error 2 Test report =========== Failed tests: - test_math Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/545/builds/5934 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-z Build Reason: <unknown> Blamelist: pulkin <gpulkin(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 9, done. remote: Counting objects: 11% (1/9) remote: Counting objects: 22% (2/9) remote: Counting objects: 33% (3/9) remote: Counting objects: 44% (4/9) remote: Counting objects: 55% (5/9) remote: Counting objects: 66% (6/9) remote: Counting objects: 77% (7/9) remote: Counting objects: 88% (8/9) remote: Counting objects: 100% (9/9) remote: Counting objects: 100% (9/9), done. remote: Compressing objects: 12% (1/8) remote: Compressing objects: 25% (2/8) remote: Compressing objects: 37% (3/8) remote: Compressing objects: 50% (4/8) remote: Compressing objects: 62% (5/8) remote: Compressing objects: 75% (6/8) remote: Compressing objects: 87% (7/8) remote: Compressing objects: 100% (8/8) remote: Compressing objects: 100% (8/8), done. remote: Total 9 (delta 1), reused 2 (delta 1), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to '0abf997e75bd3a8b76d920d33cc64d5e6c2d380f'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 0abf997e75 gh-119105: difflib: improve recursion for degenerate cases (#119131) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [Makefile:3113: clean-retain-profile] Error 1 (ignored) /home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/test_decimal.py:5919: UserWarning: C tests skipped: no module named _decimal. warnings.warn('C tests skipped: no module named _decimal.', In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1192:13: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1070:9: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1076:12: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1076:12: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1083:9: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1083:9: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1110:7: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1123:9: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1123:9: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1192:13: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1070:9: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1076:12: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1076:12: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1083:9: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1083:9: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1110:7: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1123:9: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1123:9: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^ make: *** [Makefile:2240: buildbottest] Error 2 Test report =========== Failed tests: - test_free_threading Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder ARM64 MacOS M1 Refleaks NoGIL 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1368/builds/1028 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: itamaro-macos-arm64-aws Build Reason: <unknown> Blamelist: pulkin <gpulkin(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 9, done. remote: Counting objects: 11% (1/9) remote: Counting objects: 22% (2/9) remote: Counting objects: 33% (3/9) remote: Counting objects: 44% (4/9) remote: Counting objects: 55% (5/9) remote: Counting objects: 66% (6/9) remote: Counting objects: 77% (7/9) remote: Counting objects: 88% (8/9) remote: Counting objects: 100% (9/9) remote: Counting objects: 100% (9/9), done. remote: Compressing objects: 12% (1/8) remote: Compressing objects: 25% (2/8) remote: Compressing objects: 37% (3/8) remote: Compressing objects: 50% (4/8) remote: Compressing objects: 62% (5/8) remote: Compressing objects: 75% (6/8) remote: Compressing objects: 87% (7/8) remote: Compressing objects: 100% (8/8) remote: Compressing objects: 100% (8/8), done. remote: Total 9 (delta 1), reused 2 (delta 1), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to '0abf997e75bd3a8b76d920d33cc64d5e6c2d380f'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 0abf997e75 gh-119105: difflib: improve recursion for degenerate cases (#119131) Switched to and reset branch 'main' In file included from ./Modules/tkappinit.c:17: In file included from /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/tk.h:99: /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:131:21: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] int (*free_private)(); /* called to free private storage */ ^ void In file included from ./Modules/_tkinter.c:52: In file included from /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/tk.h:99: /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:131:21: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] int (*free_private)(); /* called to free private storage */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:334:33: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] struct _XImage *(*create_image)(); ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:334:33: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] struct _XImage *(*create_image)(); ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:453:23: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] XID (*resource_alloc)(); /* allocator function */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:471:20: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] int (*synchandler)(); /* Synchronization handler */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:453:23: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] XID (*resource_alloc)(); /* allocator function */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:496:24: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] Bool (*event_vec[128])(); /* vector for wire to event */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:471:20/opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:: 497warning: :a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] int (*synchandler)(); /* Synchronization handler */ 25: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] Status (*wire_vec[128])(); /* vector for event to wire */ ^ void ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:509:20: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] Bool (**error_vec)(); /* vector for wire to error */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:522:25: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] int (*savedsynchandler)(); /* user synchandler when Xlib usurps */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:496:24: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] Bool (*event_vec[128])(); /* vector for wire to event */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:497:25: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] Status (*wire_vec[128])(); /* vector for event to wire */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:1053:24: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] typedef void (*XIMProc)(); ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:509:20: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] Bool (**error_vec)(); /* vector for wire to error */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:522:25: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] int (*savedsynchandler)(); /* user synchandler when Xlib usurps */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:1053:24: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] typedef void (*XIMProc)(); ^ void 9 warnings generated. 9 warnings generated. make: *** [buildbottest] Error 2 Test report =========== Failed tests: - test_sqlite3 Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): - failed test (failure) (bc5e47ccb7abf576435ed0466d7fe92bf38fd3e8)
by buildbot＠python.org 20 May '24

20 May '24

The Buildbot has detected a new failure on builder aarch64 RHEL8 Refleaks 3.13 while building Python. Full details are available at: https://buildbot.python.org/all/#/builders/1445/builds/11 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-aarch64 Build Reason: <unknown> Blamelist: BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 52, done. remote: Counting objects: 1% (1/51) remote: Counting objects: 3% (2/51) remote: Counting objects: 5% (3/51) remote: Counting objects: 7% (4/51) remote: Counting objects: 9% (5/51) remote: Counting objects: 11% (6/51) remote: Counting objects: 13% (7/51) remote: Counting objects: 15% (8/51) remote: Counting objects: 17% (9/51) remote: Counting objects: 19% (10/51) remote: Counting objects: 21% (11/51) remote: Counting objects: 23% (12/51) remote: Counting objects: 25% (13/51) remote: Counting objects: 27% (14/51) remote: Counting objects: 29% (15/51) remote: Counting objects: 31% (16/51) remote: Counting objects: 33% (17/51) remote: Counting objects: 35% (18/51) remote: Counting objects: 37% (19/51) remote: Counting objects: 39% (20/51) remote: Counting objects: 41% (21/51) remote: Counting objects: 43% (22/51) remote: Counting objects: 45% (23/51) remote: Counting objects: 47% (24/51) remote: Counting objects: 49% (25/51) remote: Counting objects: 50% (26/51) remote: Counting objects: 52% (27/51) remote: Counting objects: 54% (28/51) remote: Counting objects: 56% (29/51) remote: Counting objects: 58% (30/51) remote: Counting objects: 60% (31/51) remote: Counting objects: 62% (32/51) remote: Counting objects: 64% (33/51) remote: Counting objects: 66% (34/51) remote: Counting objects: 68% (35/51) remote: Counting objects: 70% (36/51) remote: Counting objects: 72% (37/51) remote: Counting objects: 74% (38/51) remote: Counting objects: 76% (39/51) remote: Counting objects: 78% (40/51) remote: Counting objects: 80% (41/51) remote: Counting objects: 82% (42/51) remote: Counting objects: 84% (43/51) remote: Counting objects: 86% (44/51) remote: Counting objects: 88% (45/51) remote: Counting objects: 90% (46/51) remote: Counting objects: 92% (47/51) remote: Counting objects: 94% (48/51) remote: Counting objects: 96% (49/51) remote: Counting objects: 98% (50/51) remote: Counting objects: 100% (51/51) remote: Counting objects: 100% (51/51), done. remote: Compressing objects: 2% (1/39) remote: Compressing objects: 5% (2/39) remote: Compressing objects: 7% (3/39) remote: Compressing objects: 10% (4/39) remote: Compressing objects: 12% (5/39) remote: Compressing objects: 15% (6/39) remote: Compressing objects: 17% (7/39) remote: Compressing objects: 20% (8/39) remote: Compressing objects: 23% (9/39) remote: Compressing objects: 25% (10/39) remote: Compressing objects: 28% (11/39) remote: Compressing objects: 30% (12/39) remote: Compressing objects: 33% (13/39) remote: Compressing objects: 35% (14/39) remote: Compressing objects: 38% (15/39) remote: Compressing objects: 41% (16/39) remote: Compressing objects: 43% (17/39) remote: Compressing objects: 46% (18/39) remote: Compressing objects: 48% (19/39) remote: Compressing objects: 51% (20/39) remote: Compressing objects: 53% (21/39) remote: Compressing objects: 56% (22/39) remote: Compressing objects: 58% (23/39) remote: Compressing objects: 61% (24/39) remote: Compressing objects: 64% (25/39) remote: Compressing objects: 66% (26/39) remote: Compressing objects: 69% (27/39) remote: Compressing objects: 71% (28/39) remote: Compressing objects: 74% (29/39) remote: Compressing objects: 76% (30/39) remote: Compressing objects: 79% (31/39) remote: Compressing objects: 82% (32/39) remote: Compressing objects: 84% (33/39) remote: Compressing objects: 87% (34/39) remote: Compressing objects: 89% (35/39) remote: Compressing objects: 92% (36/39) remote: Compressing objects: 94% (37/39) remote: Compressing objects: 97% (38/39) remote: Compressing objects: 100% (39/39) remote: Compressing objects: 100% (39/39), done. remote: Total 52 (delta 22), reused 25 (delta 12), pack-reused 1 From https://github.com/python/cpython * branch 3.13 -> FETCH_HEAD Note: switching to 'FETCH_HEAD'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at bc5e47ccb7 [3.13] marshal docs: Remove reference to "Sun" (GH-119161) (#119167) Switched to and reset branch '3.13' configure: WARNING: no system libmpdecimal found; unable to build _decimal make: *** [Makefile:2242: buildbottest] Error 2 Test report =========== Failed tests: - test_typing Test leaking resources: - test_typing: memory blocks Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): - failed test (failure) (697465ff88e49d98443025474e5b534adfba2cb0)
by buildbot＠python.org 20 May '24

20 May '24

The Buildbot has detected a new failure on builder PPC64LE CentOS9 Refleaks 3.x while building Python. Full details are available at: https://buildbot.python.org/all/#/builders/867/builds/823 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-CentOS9-ppc64le Build Reason: <unknown> Blamelist: BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 68, done. remote: Counting objects: 1% (1/67) remote: Counting objects: 2% (2/67) remote: Counting objects: 4% (3/67) remote: Counting objects: 5% (4/67) remote: Counting objects: 7% (5/67) remote: Counting objects: 8% (6/67) remote: Counting objects: 10% (7/67) remote: Counting objects: 11% (8/67) remote: Counting objects: 13% (9/67) remote: Counting objects: 14% (10/67) remote: Counting objects: 16% (11/67) remote: Counting objects: 17% (12/67) remote: Counting objects: 19% (13/67) remote: Counting objects: 20% (14/67) remote: Counting objects: 22% (15/67) remote: Counting objects: 23% (16/67) remote: Counting objects: 25% (17/67) remote: Counting objects: 26% (18/67) remote: Counting objects: 28% (19/67) remote: Counting objects: 29% (20/67) remote: Counting objects: 31% (21/67) remote: Counting objects: 32% (22/67) remote: Counting objects: 34% (23/67) remote: Counting objects: 35% (24/67) remote: Counting objects: 37% (25/67) remote: Counting objects: 38% (26/67) remote: Counting objects: 40% (27/67) remote: Counting objects: 41% (28/67) remote: Counting objects: 43% (29/67) remote: Counting objects: 44% (30/67) remote: Counting objects: 46% (31/67) remote: Counting objects: 47% (32/67) remote: Counting objects: 49% (33/67) remote: Counting objects: 50% (34/67) remote: Counting objects: 52% (35/67) remote: Counting objects: 53% (36/67) remote: Counting objects: 55% (37/67) remote: Counting objects: 56% (38/67) remote: Counting objects: 58% (39/67) remote: Counting objects: 59% (40/67) remote: Counting objects: 61% (41/67) remote: Counting objects: 62% (42/67) remote: Counting objects: 64% (43/67) remote: Counting objects: 65% (44/67) remote: Counting objects: 67% (45/67) remote: Counting objects: 68% (46/67) remote: Counting objects: 70% (47/67) remote: Counting objects: 71% (48/67) remote: Counting objects: 73% (49/67) remote: Counting objects: 74% (50/67) remote: Counting objects: 76% (51/67) remote: Counting objects: 77% (52/67) remote: Counting objects: 79% (53/67) remote: Counting objects: 80% (54/67) remote: Counting objects: 82% (55/67) remote: Counting objects: 83% (56/67) remote: Counting objects: 85% (57/67) remote: Counting objects: 86% (58/67) remote: Counting objects: 88% (59/67) remote: Counting objects: 89% (60/67) remote: Counting objects: 91% (61/67) remote: Counting objects: 92% (62/67) remote: Counting objects: 94% (63/67) remote: Counting objects: 95% (64/67) remote: Counting objects: 97% (65/67) remote: Counting objects: 98% (66/67) remote: Counting objects: 100% (67/67) remote: Counting objects: 100% (67/67), done. remote: Compressing objects: 1% (1/51) remote: Compressing objects: 3% (2/51) remote: Compressing objects: 5% (3/51) remote: Compressing objects: 7% (4/51) remote: Compressing objects: 9% (5/51) remote: Compressing objects: 11% (6/51) remote: Compressing objects: 13% (7/51) remote: Compressing objects: 15% (8/51) remote: Compressing objects: 17% (9/51) remote: Compressing objects: 19% (10/51) remote: Compressing objects: 21% (11/51) remote: Compressing objects: 23% (12/51) remote: Compressing objects: 25% (13/51) remote: Compressing objects: 27% (14/51) remote: Compressing objects: 29% (15/51) remote: Compressing objects: 31% (16/51) remote: Compressing objects: 33% (17/51) remote: Compressing objects: 35% (18/51) remote: Compressing objects: 37% (19/51) remote: Compressing objects: 39% (20/51) remote: Compressing objects: 41% (21/51) remote: Compressing objects: 43% (22/51) remote: Compressing objects: 45% (23/51) remote: Compressing objects: 47% (24/51) remote: Compressing objects: 49% (25/51) remote: Compressing objects: 50% (26/51) remote: Compressing objects: 52% (27/51) remote: Compressing objects: 54% (28/51) remote: Compressing objects: 56% (29/51) remote: Compressing objects: 58% (30/51) remote: Compressing objects: 60% (31/51) remote: Compressing objects: 62% (32/51) remote: Compressing objects: 64% (33/51) remote: Compressing objects: 66% (34/51) remote: Compressing objects: 68% (35/51) remote: Compressing objects: 70% (36/51) remote: Compressing objects: 72% (37/51) remote: Compressing objects: 74% (38/51) remote: Compressing objects: 76% (39/51) remote: Compressing objects: 78% (40/51) remote: Compressing objects: 80% (41/51) remote: Compressing objects: 82% (42/51) remote: Compressing objects: 84% (43/51) remote: Compressing objects: 86% (44/51) remote: Compressing objects: 88% (45/51) remote: Compressing objects: 90% (46/51) remote: Compressing objects: 92% (47/51) remote: Compressing objects: 94% (48/51) remote: Compressing objects: 96% (49/51) remote: Compressing objects: 98% (50/51) remote: Compressing objects: 100% (51/51) remote: Compressing objects: 100% (51/51), done. remote: Total 68 (delta 28), reused 31 (delta 16), pack-reused 1 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'FETCH_HEAD'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 697465ff88 marshal docs: Remove reference to "Sun" (#119161) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal make: *** [Makefile:2242: buildbottest] Error 2 Test report =========== Failed tests: - test_sqlite3 Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) (main)
by buildbot＠python.org 19 May '24

19 May '24

The Buildbot has detected a new failure on builder AMD64 Ubuntu NoGIL Refleaks 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1226/builds/1884 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: itamaro-ubuntu-aws Build Reason: <unknown> Blamelist: Alex Waygood <Alex.Waygood(a)Gmail.com>, Barney Gale <barney.gale(a)gmail.com>, Brandt Bucher <brandtbucher(a)microsoft.com>, Donghee Na <donghee.na(a)python.org>, Jelle Zijlstra <jelle.zijlstra(a)gmail.com>, Kirill Podoprigora <kirill.bast9(a)mail.ru>, Lysandros Nikolaou <lisandrosnik(a)gmail.com>, Miro Hrončok <miro(a)hroncok.cz>, Nice Zombies <nineteendo19d0(a)gmail.com>, Rafael Fontenelle <rffontenelle(a)users.noreply.github.com>, Raymond Hettinger <rhettinger(a)users.noreply.github.com>, Savannah Ostrowski <savannahostrowski(a)gmail.com>, Serhiy Storchaka <storchaka(a)gmail.com>, Shantanu <12621235+hauntsaninja(a)users.noreply.github.com>, Steve Dower <steve.dower(a)python.org>, Thomas Grainger <tagrain(a)gmail.com>, Tim Peters <tim.peters(a)gmail.com>, Victor Stinner <vstinner(a)python.org>, Wulian233 <71213467+Wulian233(a)users.noreply.github.com>, Xie Yanbo <xieyanbo(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/test/test_os.py", line 4243, in test_timerfd_TFD_TIMER_ABSTIME self.assertGreater(t, offset - self.CLOCK_RES) ~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^ AssertionError: 0.9781003398820758 not greater than 0.999 Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/test/test_concurrent_futures/executor.py", line 71, in test_map_timeout self.assertEqual([None, None], results) ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^ AssertionError: Lists differ: [None, None] != [] Test report =========== Failed tests: - test.test_concurrent_futures.test_process_pool - test_os Failed subtests: - test_map_timeout - test.test_concurrent_futures.test_process_pool.ProcessPoolForkserverProcessPoolExecutorTest.test_map_timeout - test_timerfd_TFD_TIMER_ABSTIME - test.test_os.TimerfdTests.test_timerfd_TFD_TIMER_ABSTIME - test_map_timeout - test.test_concurrent_futures.test_process_pool.ProcessPoolSpawnProcessPoolExecutorTest.test_map_timeout Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) (main)
by buildbot＠python.org 19 May '24

19 May '24

The Buildbot has detected a new failure on builder ARM64 MacOS M1 Refleaks NoGIL 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1368/builds/1026 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: itamaro-macos-arm64-aws Build Reason: <unknown> Blamelist: Barney Gale <barney.gale(a)gmail.com>, Jelle Zijlstra <jelle.zijlstra(a)gmail.com>, Savannah Ostrowski <savannahostrowski(a)gmail.com>, Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 15, done. remote: Counting objects: 6% (1/15) remote: Counting objects: 13% (2/15) remote: Counting objects: 20% (3/15) remote: Counting objects: 26% (4/15) remote: Counting objects: 33% (5/15) remote: Counting objects: 40% (6/15) remote: Counting objects: 46% (7/15) remote: Counting objects: 53% (8/15) remote: Counting objects: 60% (9/15) remote: Counting objects: 66% (10/15) remote: Counting objects: 73% (11/15) remote: Counting objects: 80% (12/15) remote: Counting objects: 86% (13/15) remote: Counting objects: 93% (14/15) remote: Counting objects: 100% (15/15) remote: Counting objects: 100% (15/15), done. remote: Compressing objects: 10% (1/10) remote: Compressing objects: 20% (2/10) remote: Compressing objects: 30% (3/10) remote: Compressing objects: 40% (4/10) remote: Compressing objects: 50% (5/10) remote: Compressing objects: 60% (6/10) remote: Compressing objects: 70% (7/10) remote: Compressing objects: 80% (8/10) remote: Compressing objects: 90% (9/10) remote: Compressing objects: 100% (10/10) remote: Compressing objects: 100% (10/10), done. remote: Total 15 (delta 5), reused 8 (delta 5), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to '4b7667172898d440c1931ae923446c6a5ef1765e'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 4b76671728 GH-118447: Fix FreeBSD test failures. (#119170) Switched to and reset branch 'main' In file included from ./Modules/tkappinit.c:17: In file included from /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/tk.h:99: /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:131:21: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] int (*free_private)(); /* called to free private storage */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:334:33: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] struct _XImage *(*create_image)(); ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:453:23: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] XID (*resource_alloc)(); /* allocator function */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:471:20: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] int (*synchandler)(); /* Synchronization handler */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:496:24: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] Bool (*event_vec[128])(); /* vector for wire to event */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:497:25: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] Status (*wire_vec[128])(); /* vector for event to wire */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:509:20: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] Bool (**error_vec)(); /* vector for wire to error */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:522:25: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] int (*savedsynchandler)(); /* user synchandler when Xlib usurps */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:1053:24: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] typedef void (*XIMProc)(); ^ void 9 warnings generated. In file included from ./Modules/_tkinter.c:52: In file included from /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/tk.h:99: /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:131:21: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] int (*free_private)(); /* called to free private storage */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:334:33: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] struct _XImage *(*create_image)(); ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:453:23: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] XID (*resource_alloc)(); /* allocator function */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:471:20: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] int (*synchandler)(); /* Synchronization handler */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:496:24: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] Bool (*event_vec[128])(); /* vector for wire to event */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:497:25: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] Status (*wire_vec[128])(); /* vector for event to wire */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:509:20: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] Bool (**error_vec)(); /* vector for wire to error */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:522:25: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] int (*savedsynchandler)(); /* user synchandler when Xlib usurps */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:1053:24: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] typedef void (*XIMProc)(); ^ void 9 warnings generated. make: *** [buildbottest] Error 2 Test report =========== Failed tests: - test_sqlite3 Sincerely, -The Buildbot

1 0

Buildbot Python worker billenstein-macos missing
by buildbot＠python.org 19 May '24

19 May '24

The Buildbot worker named billenstein-macos went away. It last disconnected at Sun May 19 16:05:21 2024. The admin on record (as reported by WORKER:info/admin) was Matt Billenstein <matt(a)vazor.com> .

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) (3.13)
by buildbot＠python.org 19 May '24

19 May '24

The Buildbot has detected a new failure on builder AMD64 FreeBSD15 3.13 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1406/builds/41 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: opsec-fbsd15 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.13.opsec-fbsd15/build/Lib/test/test_posixpath.py", line 670, in test_realpath_unreadable_symlink self.assertEqual(realpath(ABSTFN), ABSTFN) ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^ AssertionError: '/hom[25 chars].opsec-fbsd15/build/build/test_python_79639æ/@test_79639_tmpæ1' != '/hom[25 chars].opsec-fbsd15/build/build/test_python_79639æ/@test_79639_tmpæ' - /home/buildbot/buildarea/3.13.opsec-fbsd15/build/build/test_python_79639æ/@test_79639_tmpæ1 ? - + /home/buildbot/buildarea/3.13.opsec-fbsd15/build/build/test_python_79639æ/@test_79639_tmpæ Traceback (most recent call last): File "/home/buildbot/buildarea/3.13.opsec-fbsd15/build/Lib/test/test_posixpath.py", line 670, in test_realpath_unreadable_symlink self.assertEqual(realpath(ABSTFN), ABSTFN) ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^ AssertionError: '/hom[25 chars].opsec-fbsd15/build/build/test_python_83410æ/@test_83410_tmpæ1' != '/hom[25 chars].opsec-fbsd15/build/build/test_python_83410æ/@test_83410_tmpæ' - /home/buildbot/buildarea/3.13.opsec-fbsd15/build/build/test_python_83410æ/@test_83410_tmpæ1 ? - + /home/buildbot/buildarea/3.13.opsec-fbsd15/build/build/test_python_83410æ/@test_83410_tmpæ Test report =========== Failed tests: - test_posixpath Failed subtests: - test_realpath_unreadable_symlink - test.test_posixpath.PosixPathTest.test_realpath_unreadable_symlink Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 FreeBSD14 3.13 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1481/builds/45 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: opsec-fbsd14 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.13.opsec-fbsd14/build/Lib/test/test_posixpath.py", line 670, in test_realpath_unreadable_symlink self.assertEqual(realpath(ABSTFN), ABSTFN) ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^ AssertionError: '/hom[25 chars].opsec-fbsd14/build/build/test_python_95351æ/@test_95351_tmpæ1' != '/hom[25 chars].opsec-fbsd14/build/build/test_python_95351æ/@test_95351_tmpæ' - /home/buildbot/buildarea/3.13.opsec-fbsd14/build/build/test_python_95351æ/@test_95351_tmpæ1 ? - + /home/buildbot/buildarea/3.13.opsec-fbsd14/build/build/test_python_95351æ/@test_95351_tmpæ Traceback (most recent call last): File "/home/buildbot/buildarea/3.13.opsec-fbsd14/build/Lib/test/test_posixpath.py", line 670, in test_realpath_unreadable_symlink self.assertEqual(realpath(ABSTFN), ABSTFN) ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^ AssertionError: '/hom[25 chars].opsec-fbsd14/build/build/test_python_94029æ/@test_94029_tmpæ1' != '/hom[25 chars].opsec-fbsd14/build/build/test_python_94029æ/@test_94029_tmpæ' - /home/buildbot/buildarea/3.13.opsec-fbsd14/build/build/test_python_94029æ/@test_94029_tmpæ1 ? - + /home/buildbot/buildarea/3.13.opsec-fbsd14/build/build/test_python_94029æ/@test_94029_tmpæ Test report =========== Failed tests: - test_posixpath Failed subtests: - test_realpath_unreadable_symlink - test.test_posixpath.PosixPathTest.test_realpath_unreadable_symlink Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 FreeBSD 3.13 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1491/builds/46 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: ware-freebsd Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/buildbot/buildarea/3.13.ware-freebsd/build/Lib/test/test_posixpath.py", line 670, in test_realpath_unreadable_symlink self.assertEqual(realpath(ABSTFN), ABSTFN) ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^ AssertionError: '/bui[20 chars].ware-freebsd/build/build/test_python_84680æ/@test_84680_tmpæ1' != '/bui[20 chars].ware-freebsd/build/build/test_python_84680æ/@test_84680_tmpæ' - /buildbot/buildarea/3.13.ware-freebsd/build/build/test_python_84680æ/@test_84680_tmpæ1 ? - + /buildbot/buildarea/3.13.ware-freebsd/build/build/test_python_84680æ/@test_84680_tmpæ Traceback (most recent call last): File "/buildbot/buildarea/3.13.ware-freebsd/build/Lib/test/test_posixpath.py", line 670, in test_realpath_unreadable_symlink self.assertEqual(realpath(ABSTFN), ABSTFN) ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^ AssertionError: '/bui[20 chars].ware-freebsd/build/build/test_python_77930æ/@test_77930_tmpæ1' != '/bui[20 chars].ware-freebsd/build/build/test_python_77930æ/@test_77930_tmpæ' - /buildbot/buildarea/3.13.ware-freebsd/build/build/test_python_77930æ/@test_77930_tmpæ1 ? - + /buildbot/buildarea/3.13.ware-freebsd/build/build/test_python_77930æ/@test_77930_tmpæ Test report =========== Failed tests: - test_posixpath Failed subtests: - test_realpath_unreadable_symlink - test.test_posixpath.PosixPathTest.test_realpath_unreadable_symlink Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): - failed test (failure) (a370eebdd9bcc18d39f9e5d886ddb91a2435033e)
by buildbot＠python.org 19 May '24

19 May '24

The Buildbot has detected a new failure on builder s390x Fedora Refleaks 3.12 while building Python. Full details are available at: https://buildbot.python.org/all/#/builders/1200/builds/363 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-z Build Reason: <unknown> Blamelist: BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 19, done. remote: Counting objects: 5% (1/19) remote: Counting objects: 10% (2/19) remote: Counting objects: 15% (3/19) remote: Counting objects: 21% (4/19) remote: Counting objects: 26% (5/19) remote: Counting objects: 31% (6/19) remote: Counting objects: 36% (7/19) remote: Counting objects: 42% (8/19) remote: Counting objects: 47% (9/19) remote: Counting objects: 52% (10/19) remote: Counting objects: 57% (11/19) remote: Counting objects: 63% (12/19) remote: Counting objects: 68% (13/19) remote: Counting objects: 73% (14/19) remote: Counting objects: 78% (15/19) remote: Counting objects: 84% (16/19) remote: Counting objects: 89% (17/19) remote: Counting objects: 94% (18/19) remote: Counting objects: 100% (19/19) remote: Counting objects: 100% (19/19), done. remote: Compressing objects: 6% (1/15) remote: Compressing objects: 13% (2/15) remote: Compressing objects: 20% (3/15) remote: Compressing objects: 26% (4/15) remote: Compressing objects: 33% (5/15) remote: Compressing objects: 40% (6/15) remote: Compressing objects: 46% (7/15) remote: Compressing objects: 53% (8/15) remote: Compressing objects: 60% (9/15) remote: Compressing objects: 66% (10/15) remote: Compressing objects: 73% (11/15) remote: Compressing objects: 80% (12/15) remote: Compressing objects: 86% (13/15) remote: Compressing objects: 93% (14/15) remote: Compressing objects: 100% (15/15) remote: Compressing objects: 100% (15/15), done. remote: Total 19 (delta 4), reused 15 (delta 4), pack-reused 0 From https://github.com/python/cpython * branch 3.12 -> FETCH_HEAD Note: switching to 'FETCH_HEAD'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at a370eebdd9 [3.12] Minor improvements to the docs for itertools.tee() (gh-119135) (gh-119137) Switched to and reset branch '3.12' make: *** [Makefile:2015: buildbottest] Error 2 Test report =========== Failed tests: - test_typing Test leaking resources: - test_typing: memory blocks Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) (main)
by buildbot＠python.org 19 May '24

19 May '24

The Buildbot has detected a new failure on builder s390x Fedora LTO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/55/builds/5065 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-z Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Note: switching to 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at ecd8664f11 gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal In function ‘_bufferedreader_read_generic’, inlined from ‘_io__Buffered_read_impl’ at ./Modules/_io/bufferedio.c:1005:0, inlined from ‘_io__Buffered_read’ at ./Modules/_io/clinic/bufferedio.c.h:667:0: ./Modules/_io/bufferedio.c:1854: warning: ‘__builtin_memcpy’ specified bound between 9223372036854775808 and 18446744073709551613 exceeds maximum object size 9223372036854775807 [-Wstringop-overflow=] 1854 | memcpy(out + written, self->buffer + self->pos, r); | In function ‘_bufferedreader_read_generic’, inlined from ‘_io__Buffered_read_impl’ at ./Modules/_io/bufferedio.c:1005:0, inlined from ‘_io__Buffered_read’ at ./Modules/_io/clinic/bufferedio.c.h:667:0: ./Modules/_io/bufferedio.c:1854: warning: ‘__builtin_memcpy’ specified bound between 9223372036854775808 and 18446744073709551613 exceeds maximum object size 9223372036854775807 [-Wstringop-overflow=] 1854 | memcpy(out + written, self->buffer + self->pos, r); | In function ‘_bufferedreader_read_generic’, inlined from ‘_io__Buffered_read_impl’ at ./Modules/_io/bufferedio.c:1005:0, inlined from ‘_io__Buffered_read’ at ./Modules/_io/clinic/bufferedio.c.h:667:0: ./Modules/_io/bufferedio.c:1854: warning: ‘__builtin_memcpy’ specified bound between 9223372036854775808 and 18446744073709551613 exceeds maximum object size 9223372036854775807 [-Wstringop-overflow=] 1854 | memcpy(out + written, self->buffer + self->pos, r); | make: *** [Makefile:2240: buildbottest] Error 2 Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/545/builds/5930 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-z Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Note: switching to 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at ecd8664f11 gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [Makefile:3113: clean-retain-profile] Error 1 (ignored) /home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/test_decimal.py:5919: UserWarning: C tests skipped: no module named _decimal. warnings.warn('C tests skipped: no module named _decimal.', In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1192:13: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1070:9: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1076:12: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1076:12: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1083:9: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1083:9: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1110:7: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1123:9: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1123:9: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1192:13: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1070:9: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1076:12: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1076:12: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1083:9: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1083:9: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1110:7: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1123:9: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1123:9: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^ make: *** [Makefile:2240: buildbottest] Error 2 Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder aarch64 RHEL8 LTO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/338/builds/6828 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-aarch64 Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Note: switching to 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at ecd8664f11 gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal make: *** [Makefile:2242: buildbottest] Error 2 Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x RHEL8 LTO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/567/builds/6594 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-rhel8-z Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 33, done. remote: Counting objects: 3% (1/33) remote: Counting objects: 6% (2/33) remote: Counting objects: 9% (3/33) remote: Counting objects: 12% (4/33) remote: Counting objects: 15% (5/33) remote: Counting objects: 18% (6/33) remote: Counting objects: 21% (7/33) remote: Counting objects: 24% (8/33) remote: Counting objects: 27% (9/33) remote: Counting objects: 30% (10/33) remote: Counting objects: 33% (11/33) remote: Counting objects: 36% (12/33) remote: Counting objects: 39% (13/33) remote: Counting objects: 42% (14/33) remote: Counting objects: 45% (15/33) remote: Counting objects: 48% (16/33) remote: Counting objects: 51% (17/33) remote: Counting objects: 54% (18/33) remote: Counting objects: 57% (19/33) remote: Counting objects: 60% (20/33) remote: Counting objects: 63% (21/33) remote: Counting objects: 66% (22/33) remote: Counting objects: 69% (23/33) remote: Counting objects: 72% (24/33) remote: Counting objects: 75% (25/33) remote: Counting objects: 78% (26/33) remote: Counting objects: 81% (27/33) remote: Counting objects: 84% (28/33) remote: Counting objects: 87% (29/33) remote: Counting objects: 90% (30/33) remote: Counting objects: 93% (31/33) remote: Counting objects: 96% (32/33) remote: Counting objects: 100% (33/33) remote: Counting objects: 100% (33/33), done. remote: Compressing objects: 6% (1/15) remote: Compressing objects: 13% (2/15) remote: Compressing objects: 20% (3/15) remote: Compressing objects: 26% (4/15) remote: Compressing objects: 33% (5/15) remote: Compressing objects: 40% (6/15) remote: Compressing objects: 46% (7/15) remote: Compressing objects: 53% (8/15) remote: Compressing objects: 60% (9/15) remote: Compressing objects: 66% (10/15) remote: Compressing objects: 73% (11/15) remote: Compressing objects: 80% (12/15) remote: Compressing objects: 86% (13/15) remote: Compressing objects: 93% (14/15) remote: Compressing objects: 100% (15/15) remote: Compressing objects: 100% (15/15), done. remote: Total 21 (delta 16), reused 6 (delta 6), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at ecd8664f11 gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal make: *** [Makefile:2242: buildbottest] Error 2 Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 RHEL8 LTO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/64/builds/6900 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-x86_64 Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 33, done. remote: Counting objects: 3% (1/33) remote: Counting objects: 6% (2/33) remote: Counting objects: 9% (3/33) remote: Counting objects: 12% (4/33) remote: Counting objects: 15% (5/33) remote: Counting objects: 18% (6/33) remote: Counting objects: 21% (7/33) remote: Counting objects: 24% (8/33) remote: Counting objects: 27% (9/33) remote: Counting objects: 30% (10/33) remote: Counting objects: 33% (11/33) remote: Counting objects: 36% (12/33) remote: Counting objects: 39% (13/33) remote: Counting objects: 42% (14/33) remote: Counting objects: 45% (15/33) remote: Counting objects: 48% (16/33) remote: Counting objects: 51% (17/33) remote: Counting objects: 54% (18/33) remote: Counting objects: 57% (19/33) remote: Counting objects: 60% (20/33) remote: Counting objects: 63% (21/33) remote: Counting objects: 66% (22/33) remote: Counting objects: 69% (23/33) remote: Counting objects: 72% (24/33) remote: Counting objects: 75% (25/33) remote: Counting objects: 78% (26/33) remote: Counting objects: 81% (27/33) remote: Counting objects: 84% (28/33) remote: Counting objects: 87% (29/33) remote: Counting objects: 90% (30/33) remote: Counting objects: 93% (31/33) remote: Counting objects: 96% (32/33) remote: Counting objects: 100% (33/33) remote: Counting objects: 100% (33/33), done. remote: Compressing objects: 5% (1/17) remote: Compressing objects: 11% (2/17) remote: Compressing objects: 17% (3/17) remote: Compressing objects: 23% (4/17) remote: Compressing objects: 29% (5/17) remote: Compressing objects: 35% (6/17) remote: Compressing objects: 41% (7/17) remote: Compressing objects: 47% (8/17) remote: Compressing objects: 52% (9/17) remote: Compressing objects: 58% (10/17) remote: Compressing objects: 64% (11/17) remote: Compressing objects: 70% (12/17) remote: Compressing objects: 76% (13/17) remote: Compressing objects: 82% (14/17) remote: Compressing objects: 88% (15/17) remote: Compressing objects: 94% (16/17) remote: Compressing objects: 100% (17/17) remote: Compressing objects: 100% (17/17), done. remote: Total 21 (delta 16), reused 5 (delta 4), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at ecd8664f11 gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal make: *** [Makefile:2242: buildbottest] Error 2 Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder aarch64 CentOS9 LTO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/882/builds/6289 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-CentOS9-aarch64 Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 33, done. remote: Counting objects: 3% (1/33) remote: Counting objects: 6% (2/33) remote: Counting objects: 9% (3/33) remote: Counting objects: 12% (4/33) remote: Counting objects: 15% (5/33) remote: Counting objects: 18% (6/33) remote: Counting objects: 21% (7/33) remote: Counting objects: 24% (8/33) remote: Counting objects: 27% (9/33) remote: Counting objects: 30% (10/33) remote: Counting objects: 33% (11/33) remote: Counting objects: 36% (12/33) remote: Counting objects: 39% (13/33) remote: Counting objects: 42% (14/33) remote: Counting objects: 45% (15/33) remote: Counting objects: 48% (16/33) remote: Counting objects: 51% (17/33) remote: Counting objects: 54% (18/33) remote: Counting objects: 57% (19/33) remote: Counting objects: 60% (20/33) remote: Counting objects: 63% (21/33) remote: Counting objects: 66% (22/33) remote: Counting objects: 69% (23/33) remote: Counting objects: 72% (24/33) remote: Counting objects: 75% (25/33) remote: Counting objects: 78% (26/33) remote: Counting objects: 81% (27/33) remote: Counting objects: 84% (28/33) remote: Counting objects: 87% (29/33) remote: Counting objects: 90% (30/33) remote: Counting objects: 93% (31/33) remote: Counting objects: 96% (32/33) remote: Counting objects: 100% (33/33) remote: Counting objects: 100% (33/33), done. remote: Compressing objects: 6% (1/15) remote: Compressing objects: 13% (2/15) remote: Compressing objects: 20% (3/15) remote: Compressing objects: 26% (4/15) remote: Compressing objects: 33% (5/15) remote: Compressing objects: 40% (6/15) remote: Compressing objects: 46% (7/15) remote: Compressing objects: 53% (8/15) remote: Compressing objects: 60% (9/15) remote: Compressing objects: 66% (10/15) remote: Compressing objects: 73% (11/15) remote: Compressing objects: 80% (12/15) remote: Compressing objects: 86% (13/15) remote: Compressing objects: 93% (14/15) remote: Compressing objects: 100% (15/15) remote: Compressing objects: 100% (15/15), done. remote: Total 21 (delta 16), reused 6 (delta 6), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at ecd8664f11 gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal make: *** [Makefile:2242: buildbottest] Error 2 Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x RHEL7 LTO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/402/builds/7247 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-rhel-z Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 33, done.[K remote: Counting objects: 3% (1/33)[K remote: Counting objects: 6% (2/33)[K remote: Counting objects: 9% (3/33)[K remote: Counting objects: 12% (4/33)[K remote: Counting objects: 15% (5/33)[K remote: Counting objects: 18% (6/33)[K remote: Counting objects: 21% (7/33)[K remote: Counting objects: 24% (8/33)[K remote: Counting objects: 27% (9/33)[K remote: Counting objects: 30% (10/33)[K remote: Counting objects: 33% (11/33)[K remote: Counting objects: 36% (12/33)[K remote: Counting objects: 39% (13/33)[K remote: Counting objects: 42% (14/33)[K remote: Counting objects: 45% (15/33)[K remote: Counting objects: 48% (16/33)[K remote: Counting objects: 51% (17/33)[K remote: Counting objects: 54% (18/33)[K remote: Counting objects: 57% (19/33)[K remote: Counting objects: 60% (20/33)[K remote: Counting objects: 63% (21/33)[K remote: Counting objects: 66% (22/33)[K remote: Counting objects: 69% (23/33)[K remote: Counting objects: 72% (24/33)[K remote: Counting objects: 75% (25/33)[K remote: Counting objects: 78% (26/33)[K remote: Counting objects: 81% (27/33)[K remote: Counting objects: 84% (28/33)[K remote: Counting objects: 87% (29/33)[K remote: Counting objects: 90% (30/33)[K remote: Counting objects: 93% (31/33)[K remote: Counting objects: 96% (32/33)[K remote: Counting objects: 100% (33/33)[K remote: Counting objects: 100% (33/33), done.[K remote: Compressing objects: 6% (1/15)[K remote: Compressing objects: 13% (2/15)[K remote: Compressing objects: 20% (3/15)[K remote: Compressing objects: 26% (4/15)[K remote: Compressing objects: 33% (5/15)[K remote: Compressing objects: 40% (6/15)[K remote: Compressing objects: 46% (7/15)[K remote: Compressing objects: 53% (8/15)[K remote: Compressing objects: 60% (9/15)[K remote: Compressing objects: 66% (10/15)[K remote: Compressing objects: 73% (11/15)[K remote: Compressing objects: 80% (12/15)[K remote: Compressing objects: 86% (13/15)[K remote: Compressing objects: 93% (14/15)[K remote: Compressing objects: 100% (15/15)[K remote: Compressing objects: 100% (15/15), done.[K remote: Total 21 (delta 16), reused 6 (delta 6), pack-reused 0[K From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: checking out 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by performing another checkout. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -b with the checkout command again. Example: git checkout -b new_branch_name HEAD is now at ecd8664... gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' ./configure: line 6140: test: too many arguments configure: WARNING: no system libmpdecimal found; unable to build _decimal Python/instrumentation.c: In function ‘allocate_instrumentation_data’: Python/instrumentation.c:1621:9: warning: missing braces around initializer [-Wmissing-braces] code->_co_monitoring->local_monitors = (_Py_LocalMonitors){ 0 }; ^ Python/instrumentation.c:1621:9: warning: (near initialization for ‘(anonymous).tools’) [-Wmissing-braces] Python/instrumentation.c:1622:9: warning: missing braces around initializer [-Wmissing-braces] code->_co_monitoring->active_monitors = (_Py_LocalMonitors){ 0 }; ^ Python/instrumentation.c:1622:9: warning: (near initialization for ‘(anonymous).tools’) [-Wmissing-braces] ./Modules/_interpretersmodule.c: In function ‘capture_exception’: ./Modules/_interpretersmodule.c:1379:5: warning: missing braces around initializer [-Wmissing-braces] _PyXI_excinfo info = {0}; ^ ./Modules/_interpretersmodule.c:1379:5: warning: (near initialization for ‘info.type’) [-Wmissing-braces] ./Modules/_interpchannelsmodule.c: In function ‘_channel_get_info’: ./Modules/_interpchannelsmodule.c:1948:21: warning: missing braces around initializer [-Wmissing-braces] *info = (struct channel_info){0}; ^ ./Modules/_interpchannelsmodule.c:1948:21: warning: (near initialization for ‘(anonymous).status’) [-Wmissing-braces] make: *** [buildbottest] Error 2 Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora Clang Installed 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/531/builds/5979 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-z Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 33, done. remote: Counting objects: 3% (1/33) remote: Counting objects: 6% (2/33) remote: Counting objects: 9% (3/33) remote: Counting objects: 12% (4/33) remote: Counting objects: 15% (5/33) remote: Counting objects: 18% (6/33) remote: Counting objects: 21% (7/33) remote: Counting objects: 24% (8/33) remote: Counting objects: 27% (9/33) remote: Counting objects: 30% (10/33) remote: Counting objects: 33% (11/33) remote: Counting objects: 36% (12/33) remote: Counting objects: 39% (13/33) remote: Counting objects: 42% (14/33) remote: Counting objects: 45% (15/33) remote: Counting objects: 48% (16/33) remote: Counting objects: 51% (17/33) remote: Counting objects: 54% (18/33) remote: Counting objects: 57% (19/33) remote: Counting objects: 60% (20/33) remote: Counting objects: 63% (21/33) remote: Counting objects: 66% (22/33) remote: Counting objects: 69% (23/33) remote: Counting objects: 72% (24/33) remote: Counting objects: 75% (25/33) remote: Counting objects: 78% (26/33) remote: Counting objects: 81% (27/33) remote: Counting objects: 84% (28/33) remote: Counting objects: 87% (29/33) remote: Counting objects: 90% (30/33) remote: Counting objects: 93% (31/33) remote: Counting objects: 96% (32/33) remote: Counting objects: 100% (33/33) remote: Counting objects: 100% (33/33), done. remote: Compressing objects: 5% (1/17) remote: Compressing objects: 11% (2/17) remote: Compressing objects: 17% (3/17) remote: Compressing objects: 23% (4/17) remote: Compressing objects: 29% (5/17) remote: Compressing objects: 35% (6/17) remote: Compressing objects: 41% (7/17) remote: Compressing objects: 47% (8/17) remote: Compressing objects: 52% (9/17) remote: Compressing objects: 58% (10/17) remote: Compressing objects: 64% (11/17) remote: Compressing objects: 70% (12/17) remote: Compressing objects: 76% (13/17) remote: Compressing objects: 82% (14/17) remote: Compressing objects: 88% (15/17) remote: Compressing objects: 94% (16/17) remote: Compressing objects: 100% (17/17) remote: Compressing objects: 100% (17/17), done. remote: Total 21 (delta 16), reused 5 (delta 4), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at ecd8664f11 gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: s390x-ibm-linux-gnu/clang is not supported configure: WARNING: no system libmpdecimal found; unable to build _decimal configure: WARNING: Platform "s390x-ibm-linux-gnu" with compiler "clang" is not supported by the CPython core team, see https://peps.python.org/pep-0011/ for more information. Python/import.c:1620:1: warning: unused function 'is_core_module' [-Wunused-function] is_core_module(PyInterpreterState *interp, PyObject *name, PyObject *path) ^ 1 warning generated. Python/pystate.c:1135:1: warning: unused function 'check_interpreter_whence' [-Wunused-function] check_interpreter_whence(long whence) ^ 1 warning generated. WARNING: The scripts pip3 and pip3.14 are installed in '/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang-installed/build/target/bin' which is not on PATH. Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location. Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 RHEL7 LTO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/507/builds/7487 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL7-x86_64 Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 33, done. remote: Counting objects: 3% (1/33) remote: Counting objects: 6% (2/33) remote: Counting objects: 9% (3/33) remote: Counting objects: 12% (4/33) remote: Counting objects: 15% (5/33) remote: Counting objects: 18% (6/33) remote: Counting objects: 21% (7/33) remote: Counting objects: 24% (8/33) remote: Counting objects: 27% (9/33) remote: Counting objects: 30% (10/33) remote: Counting objects: 33% (11/33) remote: Counting objects: 36% (12/33) remote: Counting objects: 39% (13/33) remote: Counting objects: 42% (14/33) remote: Counting objects: 45% (15/33) remote: Counting objects: 48% (16/33) remote: Counting objects: 51% (17/33) remote: Counting objects: 54% (18/33) remote: Counting objects: 57% (19/33) remote: Counting objects: 60% (20/33) remote: Counting objects: 63% (21/33) remote: Counting objects: 66% (22/33) remote: Counting objects: 69% (23/33) remote: Counting objects: 72% (24/33) remote: Counting objects: 75% (25/33) remote: Counting objects: 78% (26/33) remote: Counting objects: 81% (27/33) remote: Counting objects: 84% (28/33) remote: Counting objects: 87% (29/33) remote: Counting objects: 90% (30/33) remote: Counting objects: 93% (31/33) remote: Counting objects: 96% (32/33) remote: Counting objects: 100% (33/33) remote: Counting objects: 100% (33/33), done. remote: Compressing objects: 5% (1/17) remote: Compressing objects: 11% (2/17) remote: Compressing objects: 17% (3/17) remote: Compressing objects: 23% (4/17) remote: Compressing objects: 29% (5/17) remote: Compressing objects: 35% (6/17) remote: Compressing objects: 41% (7/17) remote: Compressing objects: 47% (8/17) remote: Compressing objects: 52% (9/17) remote: Compressing objects: 58% (10/17) remote: Compressing objects: 64% (11/17) remote: Compressing objects: 70% (12/17) remote: Compressing objects: 76% (13/17) remote: Compressing objects: 82% (14/17) remote: Compressing objects: 88% (15/17) remote: Compressing objects: 94% (16/17) remote: Compressing objects: 100% (17/17) remote: Compressing objects: 100% (17/17), done. remote: Total 21 (delta 16), reused 5 (delta 4), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: checking out 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by performing another checkout. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -b with the checkout command again. Example: git checkout -b new_branch_name HEAD is now at ecd8664... gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal make: *** [Makefile:2234: buildbottest] Error 2 Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder aarch64 RHEL8 LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/78/builds/7161 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-aarch64 Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 20, done. remote: Counting objects: 5% (1/20) remote: Counting objects: 10% (2/20) remote: Counting objects: 15% (3/20) remote: Counting objects: 20% (4/20) remote: Counting objects: 25% (5/20) remote: Counting objects: 30% (6/20) remote: Counting objects: 35% (7/20) remote: Counting objects: 40% (8/20) remote: Counting objects: 45% (9/20) remote: Counting objects: 50% (10/20) remote: Counting objects: 55% (11/20) remote: Counting objects: 60% (12/20) remote: Counting objects: 65% (13/20) remote: Counting objects: 70% (14/20) remote: Counting objects: 75% (15/20) remote: Counting objects: 80% (16/20) remote: Counting objects: 85% (17/20) remote: Counting objects: 90% (18/20) remote: Counting objects: 95% (19/20) remote: Counting objects: 100% (20/20) remote: Counting objects: 100% (20/20), done. remote: Compressing objects: 9% (1/11) remote: Compressing objects: 18% (2/11) remote: Compressing objects: 27% (3/11) remote: Compressing objects: 36% (4/11) remote: Compressing objects: 45% (5/11) remote: Compressing objects: 54% (6/11) remote: Compressing objects: 63% (7/11) remote: Compressing objects: 72% (8/11) remote: Compressing objects: 81% (9/11) remote: Compressing objects: 90% (10/11) remote: Compressing objects: 100% (11/11) remote: Compressing objects: 100% (11/11), done. remote: Total 11 (delta 8), reused 0 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at ecd8664f11 gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [Makefile:3115: clean-retain-profile] Error 1 (ignored) ./Modules/_testlimitedcapi/unicode.c: In function ‘test_string_from_format’: ./Modules/_testlimitedcapi/unicode.c:1416:1: note: variable tracking size limit exceeded with -fvar-tracking-assignments, retrying without test_string_from_format(PyObject *self, PyObject *Py_UNUSED(ignored)) ^~~~~~~~~~~~~~~~~~~~~~~ ./Modules/_testlimitedcapi/unicode.c: In function ‘test_string_from_format’: ./Modules/_testlimitedcapi/unicode.c:1416:1: note: variable tracking size limit exceeded with -fvar-tracking-assignments, retrying without test_string_from_format(PyObject *self, PyObject *Py_UNUSED(ignored)) ^ Python/Python-ast.c: In function ‘init_types’: Python/Python-ast.c:5541:1: note: variable tracking size limit exceeded with -fvar-tracking-assignments, retrying without init_types(struct ast_state *state) ^~~~~~~~~~ Python/Python-ast.c: In function ‘init_types’: Python/Python-ast.c:5541:1: note: variable tracking size limit exceeded with -fvar-tracking-assignments, retrying without init_types(struct ast_state *state) ^ Python/Python-ast.c: In function ‘init_types’: Python/Python-ast.c:5541:1: note: variable tracking size limit exceeded with -fvar-tracking-assignments, retrying without init_types(struct ast_state *state) ^ Python/Python-ast.c: In function ‘init_types’: Python/Python-ast.c:5541:1: note: variable tracking size limit exceeded with -fvar-tracking-assignments, retrying without init_types(struct ast_state *state) ^ /home/buildbot/buildarea/3.x.cstratak-RHEL8-aarch64.lto-pgo/build/Lib/test/test_decimal.py:5919: UserWarning: C tests skipped: no module named _decimal. warnings.warn('C tests skipped: no module named _decimal.', make: *** [Makefile:2242: buildbottest] Error 2 Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x RHEL8 LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/442/builds/6670 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-rhel8-z Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 25, done. remote: Counting objects: 4% (1/25) remote: Counting objects: 8% (2/25) remote: Counting objects: 12% (3/25) remote: Counting objects: 16% (4/25) remote: Counting objects: 20% (5/25) remote: Counting objects: 24% (6/25) remote: Counting objects: 28% (7/25) remote: Counting objects: 32% (8/25) remote: Counting objects: 36% (9/25) remote: Counting objects: 40% (10/25) remote: Counting objects: 44% (11/25) remote: Counting objects: 48% (12/25) remote: Counting objects: 52% (13/25) remote: Counting objects: 56% (14/25) remote: Counting objects: 60% (15/25) remote: Counting objects: 64% (16/25) remote: Counting objects: 68% (17/25) remote: Counting objects: 72% (18/25) remote: Counting objects: 76% (19/25) remote: Counting objects: 80% (20/25) remote: Counting objects: 84% (21/25) remote: Counting objects: 88% (22/25) remote: Counting objects: 92% (23/25) remote: Counting objects: 96% (24/25) remote: Counting objects: 100% (25/25) remote: Counting objects: 100% (25/25), done. remote: Compressing objects: 8% (1/12) remote: Compressing objects: 16% (2/12) remote: Compressing objects: 25% (3/12) remote: Compressing objects: 33% (4/12) remote: Compressing objects: 41% (5/12) remote: Compressing objects: 50% (6/12) remote: Compressing objects: 58% (7/12) remote: Compressing objects: 66% (8/12) remote: Compressing objects: 75% (9/12) remote: Compressing objects: 83% (10/12) remote: Compressing objects: 91% (11/12) remote: Compressing objects: 100% (12/12) remote: Compressing objects: 100% (12/12), done. remote: Total 16 (delta 12), reused 4 (delta 4), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at ecd8664f11 gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [Makefile:3115: clean-retain-profile] Error 1 (ignored) /home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/test/test_decimal.py:5919: UserWarning: C tests skipped: no module named _decimal. warnings.warn('C tests skipped: no module named _decimal.', make: *** [Makefile:2242: buildbottest] Error 2 Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 RHEL8 LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/568/builds/6615 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-x86_64 Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 20, done. remote: Counting objects: 5% (1/20) remote: Counting objects: 10% (2/20) remote: Counting objects: 15% (3/20) remote: Counting objects: 20% (4/20) remote: Counting objects: 25% (5/20) remote: Counting objects: 30% (6/20) remote: Counting objects: 35% (7/20) remote: Counting objects: 40% (8/20) remote: Counting objects: 45% (9/20) remote: Counting objects: 50% (10/20) remote: Counting objects: 55% (11/20) remote: Counting objects: 60% (12/20) remote: Counting objects: 65% (13/20) remote: Counting objects: 70% (14/20) remote: Counting objects: 75% (15/20) remote: Counting objects: 80% (16/20) remote: Counting objects: 85% (17/20) remote: Counting objects: 90% (18/20) remote: Counting objects: 95% (19/20) remote: Counting objects: 100% (20/20) remote: Counting objects: 100% (20/20), done. remote: Compressing objects: 9% (1/11) remote: Compressing objects: 18% (2/11) remote: Compressing objects: 27% (3/11) remote: Compressing objects: 36% (4/11) remote: Compressing objects: 45% (5/11) remote: Compressing objects: 54% (6/11) remote: Compressing objects: 63% (7/11) remote: Compressing objects: 72% (8/11) remote: Compressing objects: 81% (9/11) remote: Compressing objects: 90% (10/11) remote: Compressing objects: 100% (11/11) remote: Compressing objects: 100% (11/11), done. remote: Total 11 (delta 8), reused 0 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at ecd8664f11 gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [Makefile:3115: clean-retain-profile] Error 1 (ignored) /home/buildbot/buildarea/3.x.cstratak-RHEL8-x86_64.lto-pgo/build/Lib/test/test_decimal.py:5919: UserWarning: C tests skipped: no module named _decimal. warnings.warn('C tests skipped: no module named _decimal.', make: *** [Makefile:2242: buildbottest] Error 2 Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora Clang 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/3/builds/6140 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-z Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 20, done. remote: Counting objects: 5% (1/20) remote: Counting objects: 10% (2/20) remote: Counting objects: 15% (3/20) remote: Counting objects: 20% (4/20) remote: Counting objects: 25% (5/20) remote: Counting objects: 30% (6/20) remote: Counting objects: 35% (7/20) remote: Counting objects: 40% (8/20) remote: Counting objects: 45% (9/20) remote: Counting objects: 50% (10/20) remote: Counting objects: 55% (11/20) remote: Counting objects: 60% (12/20) remote: Counting objects: 65% (13/20) remote: Counting objects: 70% (14/20) remote: Counting objects: 75% (15/20) remote: Counting objects: 80% (16/20) remote: Counting objects: 85% (17/20) remote: Counting objects: 90% (18/20) remote: Counting objects: 95% (19/20) remote: Counting objects: 100% (20/20) remote: Counting objects: 100% (20/20), done. remote: Compressing objects: 9% (1/11) remote: Compressing objects: 18% (2/11) remote: Compressing objects: 27% (3/11) remote: Compressing objects: 36% (4/11) remote: Compressing objects: 45% (5/11) remote: Compressing objects: 54% (6/11) remote: Compressing objects: 63% (7/11) remote: Compressing objects: 72% (8/11) remote: Compressing objects: 81% (9/11) remote: Compressing objects: 90% (10/11) remote: Compressing objects: 100% (11/11) remote: Compressing objects: 100% (11/11), done. remote: Total 11 (delta 8), reused 1 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at ecd8664f11 gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: s390x-ibm-linux-gnu/clang is not supported configure: WARNING: no system libmpdecimal found; unable to build _decimal configure: WARNING: Platform "s390x-ibm-linux-gnu" with compiler "clang" is not supported by the CPython core team, see https://peps.python.org/pep-0011/ for more information. make: *** [Makefile:2240: buildbottest] Error 2 Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x RHEL7 LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/244/builds/7347 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-rhel-z Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 20, done.[K remote: Counting objects: 5% (1/20)[K remote: Counting objects: 10% (2/20)[K remote: Counting objects: 15% (3/20)[K remote: Counting objects: 20% (4/20)[K remote: Counting objects: 25% (5/20)[K remote: Counting objects: 30% (6/20)[K remote: Counting objects: 35% (7/20)[K remote: Counting objects: 40% (8/20)[K remote: Counting objects: 45% (9/20)[K remote: Counting objects: 50% (10/20)[K remote: Counting objects: 55% (11/20)[K remote: Counting objects: 60% (12/20)[K remote: Counting objects: 65% (13/20)[K remote: Counting objects: 70% (14/20)[K remote: Counting objects: 75% (15/20)[K remote: Counting objects: 80% (16/20)[K remote: Counting objects: 85% (17/20)[K remote: Counting objects: 90% (18/20)[K remote: Counting objects: 95% (19/20)[K remote: Counting objects: 100% (20/20)[K remote: Counting objects: 100% (20/20), done.[K remote: Compressing objects: 9% (1/11)[K remote: Compressing objects: 18% (2/11)[K remote: Compressing objects: 27% (3/11)[K remote: Compressing objects: 36% (4/11)[K remote: Compressing objects: 45% (5/11)[K remote: Compressing objects: 54% (6/11)[K remote: Compressing objects: 63% (7/11)[K remote: Compressing objects: 72% (8/11)[K remote: Compressing objects: 81% (9/11)[K remote: Compressing objects: 90% (10/11)[K remote: Compressing objects: 100% (11/11)[K remote: Compressing objects: 100% (11/11), done.[K remote: Total 11 (delta 8), reused 0 (delta 0), pack-reused 0[K From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: checking out 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by performing another checkout. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -b with the checkout command again. Example: git checkout -b new_branch_name HEAD is now at ecd8664... gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' ./configure: line 6140: test: too many arguments configure: WARNING: no system libmpdecimal found; unable to build _decimal find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [clean-retain-profile] Error 1 (ignored) Python/instrumentation.c: In function ‘allocate_instrumentation_data’: Python/instrumentation.c:1621:9: warning: missing braces around initializer [-Wmissing-braces] code->_co_monitoring->local_monitors = (_Py_LocalMonitors){ 0 }; ^ Python/instrumentation.c:1621:9: warning: (near initialization for ‘(anonymous).tools’) [-Wmissing-braces] Python/instrumentation.c:1622:9: warning: missing braces around initializer [-Wmissing-braces] code->_co_monitoring->active_monitors = (_Py_LocalMonitors){ 0 }; ^ Python/instrumentation.c:1622:9: warning: (near initialization for ‘(anonymous).tools’) [-Wmissing-braces] ./Modules/_interpretersmodule.c: In function ‘capture_exception’: ./Modules/_interpretersmodule.c:1379:5: warning: missing braces around initializer [-Wmissing-braces] _PyXI_excinfo info = {0}; ^ ./Modules/_interpretersmodule.c:1379:5: warning: (near initialization for ‘info.type’) [-Wmissing-braces] ./Modules/_interpchannelsmodule.c: In function ‘_channel_get_info’: ./Modules/_interpchannelsmodule.c:1948:21: warning: missing braces around initializer [-Wmissing-braces] *info = (struct channel_info){0}; ^ ./Modules/_interpchannelsmodule.c:1948:21: warning: (near initialization for ‘(anonymous).status’) [-Wmissing-braces] /home/dje/cpython-buildarea/3.x.edelsohn-rhel-z.lto-pgo/build/Lib/test/test_decimal.py:5919: UserWarning: C tests skipped: no module named _decimal. warnings.warn('C tests skipped: no module named _decimal.', Objects/floatobject.c: In function ‘float_add’: Objects/floatobject.c:594:11: warning: ‘a’ may be used uninitialized in this function [-Wmaybe-uninitialized] a = a + b; ^ Objects/floatobject.c: In function ‘float_sub’: Objects/floatobject.c:604:11: warning: ‘b’ may be used uninitialized in this function [-Wmaybe-uninitialized] a = a - b; ^ Objects/floatobject.c: In function ‘float_mul’: Objects/floatobject.c:614:11: warning: ‘b’ may be used uninitialized in this function [-Wmaybe-uninitialized] a = a * b; ^ Objects/floatobject.c:614:11: warning: ‘a’ may be used uninitialized in this function [-Wmaybe-uninitialized] Objects/floatobject.c: In function ‘float_div’: Objects/floatobject.c:629:11: warning: ‘b’ may be used uninitialized in this function [-Wmaybe-uninitialized] a = a / b; ^ Objects/floatobject.c:629:11: warning: ‘a’ may be used uninitialized in this function [-Wmaybe-uninitialized] Objects/floatobject.c: In function ‘float_pow’: Objects/floatobject.c:756:9: warning: ‘iw’ may be used uninitialized in this function [-Wmaybe-uninitialized] return PyFloat_FromDouble(iv == 1.0 ? 1.0 : iw); ^ Objects/floatobject.c:799:8: warning: ‘iv’ may be used uninitialized in this function [-Wmaybe-uninitialized] if (iv < 0.0) { ^ Python/instrumentation.c: In function ‘allocate_instrumentation_data’: Python/instrumentation.c:1621:9: warning: missing braces around initializer [-Wmissing-braces] code->_co_monitoring->local_monitors = (_Py_LocalMonitors){ 0 }; ^ Python/instrumentation.c:1621:9: warning: (near initialization for ‘(anonymous).tools’) [-Wmissing-braces] Python/instrumentation.c:1622:9: warning: missing braces around initializer [-Wmissing-braces] code->_co_monitoring->active_monitors = (_Py_LocalMonitors){ 0 }; ^ Python/instrumentation.c:1622:9: warning: (near initialization for ‘(anonymous).tools’) [-Wmissing-braces] ./Modules/_io/clinic/textio.c.h: In function ‘_io_TextIOWrapper_seek’: ./Modules/_io/textio.c:2655:45: warning: ‘MEM[(char * {ref-all})&cookie + 20B]’ may be used uninitialized in this function [-Wmaybe-uninitialized] decoded = PyObject_CallMethodObjArgs(self->decoder, &_Py_ID(decode), ^ ./Modules/_io/textio.c:2506:17: note: ‘MEM[(char * {ref-all})&cookie + 20B]’ was declared here cookie_type cookie; ^ ./Modules/_io/textio.c:2664:54: warning: ‘MEM[(char * {ref-all})&cookie + 16B]’ may be used uninitialized in this function [-Wmaybe-uninitialized] if (PyUnicode_GetLength(self->decoded_chars) < cookie.chars_to_skip) { ^ ./Modules/_io/textio.c:2506:17: note: ‘MEM[(char * {ref-all})&cookie + 16B]’ was declared here cookie_type cookie; ^ ./Modules/_io/textio.c:2473:40: warning: ‘MEM[(char * {ref-all})&cookie + 8B]’ may be used uninitialized in this function [-Wmaybe-uninitialized] return _textiowrapper_encoder_reset( ^ ./Modules/_io/textio.c:2506:17: note: ‘MEM[(char * {ref-all})&cookie + 8B]’ was declared here cookie_type cookie; ^ ./Modules/_io/textio.c:2473:40: warning: ‘MEM[(char * {ref-all})&cookie]’ may be used uninitialized in this function [-Wmaybe-uninitialized] return _textiowrapper_encoder_reset( ^ ./Modules/_io/textio.c:2506:17: note: ‘MEM[(char * {ref-all})&cookie]’ was declared here cookie_type cookie; ^ ./Modules/_interpretersmodule.c: In function ‘capture_exception’: ./Modules/_interpretersmodule.c:1379:5: warning: missing braces around initializer [-Wmissing-braces] _PyXI_excinfo info = {0}; ^ ./Modules/_interpretersmodule.c:1379:5: warning: (near initialization for ‘info.type’) [-Wmissing-braces] ./Modules/_interpchannelsmodule.c: In function ‘_channel_get_info’: ./Modules/_interpchannelsmodule.c:1948:21: warning: missing braces around initializer [-Wmissing-braces] *info = (struct channel_info){0}; ^ ./Modules/_interpchannelsmodule.c:1948:21: warning: (near initialization for ‘(anonymous).status’) [-Wmissing-braces] make: *** [buildbottest] Error 2 Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 RHEL7 LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/96/builds/7552 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL7-x86_64 Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 20, done. remote: Counting objects: 5% (1/20) remote: Counting objects: 10% (2/20) remote: Counting objects: 15% (3/20) remote: Counting objects: 20% (4/20) remote: Counting objects: 25% (5/20) remote: Counting objects: 30% (6/20) remote: Counting objects: 35% (7/20) remote: Counting objects: 40% (8/20) remote: Counting objects: 45% (9/20) remote: Counting objects: 50% (10/20) remote: Counting objects: 55% (11/20) remote: Counting objects: 60% (12/20) remote: Counting objects: 65% (13/20) remote: Counting objects: 70% (14/20) remote: Counting objects: 75% (15/20) remote: Counting objects: 80% (16/20) remote: Counting objects: 85% (17/20) remote: Counting objects: 90% (18/20) remote: Counting objects: 95% (19/20) remote: Counting objects: 100% (20/20) remote: Counting objects: 100% (20/20), done. remote: Compressing objects: 9% (1/11) remote: Compressing objects: 18% (2/11) remote: Compressing objects: 27% (3/11) remote: Compressing objects: 36% (4/11) remote: Compressing objects: 45% (5/11) remote: Compressing objects: 54% (6/11) remote: Compressing objects: 63% (7/11) remote: Compressing objects: 72% (8/11) remote: Compressing objects: 81% (9/11) remote: Compressing objects: 90% (10/11) remote: Compressing objects: 100% (11/11) remote: Compressing objects: 100% (11/11), done. remote: Total 11 (delta 8), reused 0 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: checking out 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by performing another checkout. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -b with the checkout command again. Example: git checkout -b new_branch_name HEAD is now at ecd8664... gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [Makefile:3107: clean-retain-profile] Error 1 (ignored) /home/buildbot/buildarea/3.x.cstratak-RHEL7-x86_64.lto-pgo/build/Lib/test/test_decimal.py:5919: UserWarning: C tests skipped: no module named _decimal. warnings.warn('C tests skipped: no module named _decimal.', make: *** [Makefile:2234: buildbottest] Error 2 Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder aarch64 CentOS9 LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/847/builds/6029 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-CentOS9-aarch64 Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 20, done. remote: Counting objects: 5% (1/20) remote: Counting objects: 10% (2/20) remote: Counting objects: 15% (3/20) remote: Counting objects: 20% (4/20) remote: Counting objects: 25% (5/20) remote: Counting objects: 30% (6/20) remote: Counting objects: 35% (7/20) remote: Counting objects: 40% (8/20) remote: Counting objects: 45% (9/20) remote: Counting objects: 50% (10/20) remote: Counting objects: 55% (11/20) remote: Counting objects: 60% (12/20) remote: Counting objects: 65% (13/20) remote: Counting objects: 70% (14/20) remote: Counting objects: 75% (15/20) remote: Counting objects: 80% (16/20) remote: Counting objects: 85% (17/20) remote: Counting objects: 90% (18/20) remote: Counting objects: 95% (19/20) remote: Counting objects: 100% (20/20) remote: Counting objects: 100% (20/20), done. remote: Compressing objects: 9% (1/11) remote: Compressing objects: 18% (2/11) remote: Compressing objects: 27% (3/11) remote: Compressing objects: 36% (4/11) remote: Compressing objects: 45% (5/11) remote: Compressing objects: 54% (6/11) remote: Compressing objects: 63% (7/11) remote: Compressing objects: 72% (8/11) remote: Compressing objects: 81% (9/11) remote: Compressing objects: 90% (10/11) remote: Compressing objects: 100% (11/11) remote: Compressing objects: 100% (11/11), done. remote: Total 11 (delta 8), reused 1 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at ecd8664f11 gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [Makefile:3115: clean-retain-profile] Error 1 (ignored) /home/buildbot/buildarea/3.x.cstratak-CentOS9-aarch64.lto-pgo/build/Lib/test/test_decimal.py:5919: UserWarning: C tests skipped: no module named _decimal. warnings.warn('C tests skipped: no module named _decimal.', In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1192:13: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute.part.0’ at ./Modules/expat/xmltok.c:1070:9: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute.part.0’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute.part.0’ at ./Modules/expat/xmltok.c:1076:12: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute.part.0’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute.part.0’ at ./Modules/expat/xmltok.c:1083:9: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute.part.0’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute.part.0’ at ./Modules/expat/xmltok.c:1110:7: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute.part.0’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute.part.0’ at ./Modules/expat/xmltok.c:1123:9: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute.part.0’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1192:13: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute.part.0’ at ./Modules/expat/xmltok.c:1070:9: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute.part.0’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute.part.0’ at ./Modules/expat/xmltok.c:1076:12: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute.part.0’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute.part.0’ at ./Modules/expat/xmltok.c:1083:9: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute.part.0’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute.part.0’ at ./Modules/expat/xmltok.c:1110:7: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute.part.0’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3, inlined from ‘parsePseudoAttribute.part.0’ at ./Modules/expat/xmltok.c:1123:9: ./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 392 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute.part.0’: ./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1 1036 | char buf[1]; | ^ make: *** [Makefile:2242: buildbottest] Error 2 Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 CentOS9 FIPS Only Blake2 Builtin Hash 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/828/builds/6594 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-CentOS9-fips-x86_64 Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 20, done. remote: Counting objects: 5% (1/20) remote: Counting objects: 10% (2/20) remote: Counting objects: 15% (3/20) remote: Counting objects: 20% (4/20) remote: Counting objects: 25% (5/20) remote: Counting objects: 30% (6/20) remote: Counting objects: 35% (7/20) remote: Counting objects: 40% (8/20) remote: Counting objects: 45% (9/20) remote: Counting objects: 50% (10/20) remote: Counting objects: 55% (11/20) remote: Counting objects: 60% (12/20) remote: Counting objects: 65% (13/20) remote: Counting objects: 70% (14/20) remote: Counting objects: 75% (15/20) remote: Counting objects: 80% (16/20) remote: Counting objects: 85% (17/20) remote: Counting objects: 90% (18/20) remote: Counting objects: 95% (19/20) remote: Counting objects: 100% (20/20) remote: Counting objects: 100% (20/20), done. remote: Compressing objects: 9% (1/11) remote: Compressing objects: 18% (2/11) remote: Compressing objects: 27% (3/11) remote: Compressing objects: 36% (4/11) remote: Compressing objects: 45% (5/11) remote: Compressing objects: 54% (6/11) remote: Compressing objects: 63% (7/11) remote: Compressing objects: 72% (8/11) remote: Compressing objects: 81% (9/11) remote: Compressing objects: 90% (10/11) remote: Compressing objects: 100% (11/11) remote: Compressing objects: 100% (11/11), done. remote: Total 11 (delta 8), reused 1 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at ecd8664f11 gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal make: *** [Makefile:2239: buildbottest] Error 2 Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 RHEL8 FIPS Only Blake2 Builtin Hash 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/469/builds/8160 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-fips-x86_64 Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 20, done. remote: Counting objects: 5% (1/20) remote: Counting objects: 10% (2/20) remote: Counting objects: 15% (3/20) remote: Counting objects: 20% (4/20) remote: Counting objects: 25% (5/20) remote: Counting objects: 30% (6/20) remote: Counting objects: 35% (7/20) remote: Counting objects: 40% (8/20) remote: Counting objects: 45% (9/20) remote: Counting objects: 50% (10/20) remote: Counting objects: 55% (11/20) remote: Counting objects: 60% (12/20) remote: Counting objects: 65% (13/20) remote: Counting objects: 70% (14/20) remote: Counting objects: 75% (15/20) remote: Counting objects: 80% (16/20) remote: Counting objects: 85% (17/20) remote: Counting objects: 90% (18/20) remote: Counting objects: 95% (19/20) remote: Counting objects: 100% (20/20) remote: Counting objects: 100% (20/20), done. remote: Compressing objects: 9% (1/11) remote: Compressing objects: 18% (2/11) remote: Compressing objects: 27% (3/11) remote: Compressing objects: 36% (4/11) remote: Compressing objects: 45% (5/11) remote: Compressing objects: 54% (6/11) remote: Compressing objects: 63% (7/11) remote: Compressing objects: 72% (8/11) remote: Compressing objects: 81% (9/11) remote: Compressing objects: 90% (10/11) remote: Compressing objects: 100% (11/11) remote: Compressing objects: 100% (11/11), done. remote: Total 11 (delta 8), reused 1 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at ecd8664f11 gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal make: *** [Makefile:2239: buildbottest] Error 2 Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x RHEL8 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/509/builds/6602 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-rhel8-z Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 20, done. remote: Counting objects: 5% (1/20) remote: Counting objects: 10% (2/20) remote: Counting objects: 15% (3/20) remote: Counting objects: 20% (4/20) remote: Counting objects: 25% (5/20) remote: Counting objects: 30% (6/20) remote: Counting objects: 35% (7/20) remote: Counting objects: 40% (8/20) remote: Counting objects: 45% (9/20) remote: Counting objects: 50% (10/20) remote: Counting objects: 55% (11/20) remote: Counting objects: 60% (12/20) remote: Counting objects: 65% (13/20) remote: Counting objects: 70% (14/20) remote: Counting objects: 75% (15/20) remote: Counting objects: 80% (16/20) remote: Counting objects: 85% (17/20) remote: Counting objects: 90% (18/20) remote: Counting objects: 95% (19/20) remote: Counting objects: 100% (20/20) remote: Counting objects: 100% (20/20), done. remote: Compressing objects: 9% (1/11) remote: Compressing objects: 18% (2/11) remote: Compressing objects: 27% (3/11) remote: Compressing objects: 36% (4/11) remote: Compressing objects: 45% (5/11) remote: Compressing objects: 54% (6/11) remote: Compressing objects: 63% (7/11) remote: Compressing objects: 72% (8/11) remote: Compressing objects: 81% (9/11) remote: Compressing objects: 90% (10/11) remote: Compressing objects: 100% (11/11) remote: Compressing objects: 100% (11/11), done. remote: Total 11 (delta 8), reused 1 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at ecd8664f11 gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal make: *** [Makefile:2242: buildbottest] Error 2 Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 RHEL8 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/185/builds/6892 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-x86_64 Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 20, done. remote: Counting objects: 5% (1/20) remote: Counting objects: 10% (2/20) remote: Counting objects: 15% (3/20) remote: Counting objects: 20% (4/20) remote: Counting objects: 25% (5/20) remote: Counting objects: 30% (6/20) remote: Counting objects: 35% (7/20) remote: Counting objects: 40% (8/20) remote: Counting objects: 45% (9/20) remote: Counting objects: 50% (10/20) remote: Counting objects: 55% (11/20) remote: Counting objects: 60% (12/20) remote: Counting objects: 65% (13/20) remote: Counting objects: 70% (14/20) remote: Counting objects: 75% (15/20) remote: Counting objects: 80% (16/20) remote: Counting objects: 85% (17/20) remote: Counting objects: 90% (18/20) remote: Counting objects: 95% (19/20) remote: Counting objects: 100% (20/20) remote: Counting objects: 100% (20/20), done. remote: Compressing objects: 9% (1/11) remote: Compressing objects: 18% (2/11) remote: Compressing objects: 27% (3/11) remote: Compressing objects: 36% (4/11) remote: Compressing objects: 45% (5/11) remote: Compressing objects: 54% (6/11) remote: Compressing objects: 63% (7/11) remote: Compressing objects: 72% (8/11) remote: Compressing objects: 81% (9/11) remote: Compressing objects: 90% (10/11) remote: Compressing objects: 100% (11/11) remote: Compressing objects: 100% (11/11), done. remote: Total 11 (delta 8), reused 0 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at ecd8664f11 gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal make: *** [Makefile:2242: buildbottest] Error 2 Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Ubuntu Shared 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/506/builds/7959 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: bolen-ubuntu Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 20, done. remote: Counting objects: 5% (1/20) remote: Counting objects: 10% (2/20) remote: Counting objects: 15% (3/20) remote: Counting objects: 20% (4/20) remote: Counting objects: 25% (5/20) remote: Counting objects: 30% (6/20) remote: Counting objects: 35% (7/20) remote: Counting objects: 40% (8/20) remote: Counting objects: 45% (9/20) remote: Counting objects: 50% (10/20) remote: Counting objects: 55% (11/20) remote: Counting objects: 60% (12/20) remote: Counting objects: 65% (13/20) remote: Counting objects: 70% (14/20) remote: Counting objects: 75% (15/20) remote: Counting objects: 80% (16/20) remote: Counting objects: 85% (17/20) remote: Counting objects: 90% (18/20) remote: Counting objects: 95% (19/20) remote: Counting objects: 100% (20/20) remote: Counting objects: 100% (20/20), done. remote: Compressing objects: 9% (1/11) remote: Compressing objects: 18% (2/11) remote: Compressing objects: 27% (3/11) remote: Compressing objects: 36% (4/11) remote: Compressing objects: 45% (5/11) remote: Compressing objects: 54% (6/11) remote: Compressing objects: 63% (7/11) remote: Compressing objects: 72% (8/11) remote: Compressing objects: 81% (9/11) remote: Compressing objects: 90% (10/11) remote: Compressing objects: 100% (11/11) remote: Compressing objects: 100% (11/11), done. remote: Total 11 (delta 8), reused 0 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at ecd8664f112 gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal configure: WARNING: pkg-config is missing. Some dependencies may not be detected correctly. make: *** [Makefile:2240: buildbottest] Error 2 Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a failed build on builder AMD64 Ubuntu 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/708/builds/6703 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: skumaran-ubuntu-x86_64 Build Reason: <unknown> Blamelist: Barney Gale <barney.gale(a)gmail.com>, Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 22, done. remote: Counting objects: 4% (1/21) remote: Counting objects: 9% (2/21) remote: Counting objects: 14% (3/21) remote: Counting objects: 19% (4/21) remote: Counting objects: 23% (5/21) remote: Counting objects: 28% (6/21) remote: Counting objects: 33% (7/21) remote: Counting objects: 38% (8/21) remote: Counting objects: 42% (9/21) remote: Counting objects: 47% (10/21) remote: Counting objects: 52% (11/21) remote: Counting objects: 57% (12/21) remote: Counting objects: 61% (13/21) remote: Counting objects: 66% (14/21) remote: Counting objects: 71% (15/21) remote: Counting objects: 76% (16/21) remote: Counting objects: 80% (17/21) remote: Counting objects: 85% (18/21) remote: Counting objects: 90% (19/21) remote: Counting objects: 95% (20/21) remote: Counting objects: 100% (21/21) remote: Counting objects: 100% (21/21), done. remote: Compressing objects: 5% (1/20) remote: Compressing objects: 10% (2/20) remote: Compressing objects: 15% (3/20) remote: Compressing objects: 20% (4/20) remote: Compressing objects: 25% (5/20) remote: Compressing objects: 30% (6/20) remote: Compressing objects: 35% (7/20) remote: Compressing objects: 40% (8/20) remote: Compressing objects: 45% (9/20) remote: Compressing objects: 50% (10/20) remote: Compressing objects: 55% (11/20) remote: Compressing objects: 60% (12/20) remote: Compressing objects: 65% (13/20) remote: Compressing objects: 70% (14/20) remote: Compressing objects: 75% (15/20) remote: Compressing objects: 80% (16/20) remote: Compressing objects: 85% (17/20) remote: Compressing objects: 90% (18/20) remote: Compressing objects: 95% (19/20) remote: Compressing objects: 100% (20/20) remote: Compressing objects: 100% (20/20), done. remote: Total 22 (delta 6), reused 4 (delta 1), pack-reused 1 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at ecd8664f11 gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal make: *** [Makefile:2242: buildbottest] Error 2 Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder aarch64 RHEL8 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/529/builds/6623 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-aarch64 Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 20, done. remote: Counting objects: 5% (1/20) remote: Counting objects: 10% (2/20) remote: Counting objects: 15% (3/20) remote: Counting objects: 20% (4/20) remote: Counting objects: 25% (5/20) remote: Counting objects: 30% (6/20) remote: Counting objects: 35% (7/20) remote: Counting objects: 40% (8/20) remote: Counting objects: 45% (9/20) remote: Counting objects: 50% (10/20) remote: Counting objects: 55% (11/20) remote: Counting objects: 60% (12/20) remote: Counting objects: 65% (13/20) remote: Counting objects: 70% (14/20) remote: Counting objects: 75% (15/20) remote: Counting objects: 80% (16/20) remote: Counting objects: 85% (17/20) remote: Counting objects: 90% (18/20) remote: Counting objects: 95% (19/20) remote: Counting objects: 100% (20/20) remote: Counting objects: 100% (20/20), done. remote: Compressing objects: 9% (1/11) remote: Compressing objects: 18% (2/11) remote: Compressing objects: 27% (3/11) remote: Compressing objects: 36% (4/11) remote: Compressing objects: 45% (5/11) remote: Compressing objects: 54% (6/11) remote: Compressing objects: 63% (7/11) remote: Compressing objects: 72% (8/11) remote: Compressing objects: 81% (9/11) remote: Compressing objects: 90% (10/11) remote: Compressing objects: 100% (11/11) remote: Compressing objects: 100% (11/11), done. remote: Total 11 (delta 8), reused 1 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at ecd8664f11 gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal make: *** [Makefile:2242: buildbottest] Error 2 Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/223/builds/5958 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-z Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 20, done. remote: Counting objects: 5% (1/20) remote: Counting objects: 10% (2/20) remote: Counting objects: 15% (3/20) remote: Counting objects: 20% (4/20) remote: Counting objects: 25% (5/20) remote: Counting objects: 30% (6/20) remote: Counting objects: 35% (7/20) remote: Counting objects: 40% (8/20) remote: Counting objects: 45% (9/20) remote: Counting objects: 50% (10/20) remote: Counting objects: 55% (11/20) remote: Counting objects: 60% (12/20) remote: Counting objects: 65% (13/20) remote: Counting objects: 70% (14/20) remote: Counting objects: 75% (15/20) remote: Counting objects: 80% (16/20) remote: Counting objects: 85% (17/20) remote: Counting objects: 90% (18/20) remote: Counting objects: 95% (19/20) remote: Counting objects: 100% (20/20) remote: Counting objects: 100% (20/20), done. remote: Compressing objects: 9% (1/11) remote: Compressing objects: 18% (2/11) remote: Compressing objects: 27% (3/11) remote: Compressing objects: 36% (4/11) remote: Compressing objects: 45% (5/11) remote: Compressing objects: 54% (6/11) remote: Compressing objects: 63% (7/11) remote: Compressing objects: 72% (8/11) remote: Compressing objects: 81% (9/11) remote: Compressing objects: 90% (10/11) remote: Compressing objects: 100% (11/11) remote: Compressing objects: 100% (11/11), done. remote: Total 11 (delta 8), reused 0 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at ecd8664f11 gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal make: *** [Makefile:2240: buildbottest] Error 2 Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x RHEL7 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/179/builds/7400 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-rhel-z Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 20, done.[K remote: Counting objects: 5% (1/20)[K remote: Counting objects: 10% (2/20)[K remote: Counting objects: 15% (3/20)[K remote: Counting objects: 20% (4/20)[K remote: Counting objects: 25% (5/20)[K remote: Counting objects: 30% (6/20)[K remote: Counting objects: 35% (7/20)[K remote: Counting objects: 40% (8/20)[K remote: Counting objects: 45% (9/20)[K remote: Counting objects: 50% (10/20)[K remote: Counting objects: 55% (11/20)[K remote: Counting objects: 60% (12/20)[K remote: Counting objects: 65% (13/20)[K remote: Counting objects: 70% (14/20)[K remote: Counting objects: 75% (15/20)[K remote: Counting objects: 80% (16/20)[K remote: Counting objects: 85% (17/20)[K remote: Counting objects: 90% (18/20)[K remote: Counting objects: 95% (19/20)[K remote: Counting objects: 100% (20/20)[K remote: Counting objects: 100% (20/20), done.[K remote: Compressing objects: 9% (1/11)[K remote: Compressing objects: 18% (2/11)[K remote: Compressing objects: 27% (3/11)[K remote: Compressing objects: 36% (4/11)[K remote: Compressing objects: 45% (5/11)[K remote: Compressing objects: 54% (6/11)[K remote: Compressing objects: 63% (7/11)[K remote: Compressing objects: 72% (8/11)[K remote: Compressing objects: 81% (9/11)[K remote: Compressing objects: 90% (10/11)[K remote: Compressing objects: 100% (11/11)[K remote: Compressing objects: 100% (11/11), done.[K remote: Total 11 (delta 8), reused 1 (delta 0), pack-reused 0[K From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: checking out 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by performing another checkout. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -b with the checkout command again. Example: git checkout -b new_branch_name HEAD is now at ecd8664... gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' ./configure: line 6140: test: too many arguments configure: WARNING: no system libmpdecimal found; unable to build _decimal Python/instrumentation.c: In function ‘allocate_instrumentation_data’: Python/instrumentation.c:1621:9: warning: missing braces around initializer [-Wmissing-braces] code->_co_monitoring->local_monitors = (_Py_LocalMonitors){ 0 }; ^ Python/instrumentation.c:1621:9: warning: (near initialization for ‘(anonymous).tools’) [-Wmissing-braces] Python/instrumentation.c:1622:9: warning: missing braces around initializer [-Wmissing-braces] code->_co_monitoring->active_monitors = (_Py_LocalMonitors){ 0 }; ^ Python/instrumentation.c:1622:9: warning: (near initialization for ‘(anonymous).tools’) [-Wmissing-braces] ./Modules/_interpretersmodule.c: In function ‘capture_exception’: ./Modules/_interpretersmodule.c:1379:5: warning: missing braces around initializer [-Wmissing-braces] _PyXI_excinfo info = {0}; ^ ./Modules/_interpretersmodule.c:1379:5: warning: (near initialization for ‘info.type’) [-Wmissing-braces] ./Modules/_interpchannelsmodule.c: In function ‘_channel_get_info’: ./Modules/_interpchannelsmodule.c:1948:21: warning: missing braces around initializer [-Wmissing-braces] *info = (struct channel_info){0}; ^ ./Modules/_interpchannelsmodule.c:1948:21: warning: (near initialization for ‘(anonymous).status’) [-Wmissing-braces] make: *** [buildbottest] Error 2 Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 RHEL7 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/15/builds/7777 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL7-x86_64 Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 20, done. remote: Counting objects: 5% (1/20) remote: Counting objects: 10% (2/20) remote: Counting objects: 15% (3/20) remote: Counting objects: 20% (4/20) remote: Counting objects: 25% (5/20) remote: Counting objects: 30% (6/20) remote: Counting objects: 35% (7/20) remote: Counting objects: 40% (8/20) remote: Counting objects: 45% (9/20) remote: Counting objects: 50% (10/20) remote: Counting objects: 55% (11/20) remote: Counting objects: 60% (12/20) remote: Counting objects: 65% (13/20) remote: Counting objects: 70% (14/20) remote: Counting objects: 75% (15/20) remote: Counting objects: 80% (16/20) remote: Counting objects: 85% (17/20) remote: Counting objects: 90% (18/20) remote: Counting objects: 95% (19/20) remote: Counting objects: 100% (20/20) remote: Counting objects: 100% (20/20), done. remote: Compressing objects: 9% (1/11) remote: Compressing objects: 18% (2/11) remote: Compressing objects: 27% (3/11) remote: Compressing objects: 36% (4/11) remote: Compressing objects: 45% (5/11) remote: Compressing objects: 54% (6/11) remote: Compressing objects: 63% (7/11) remote: Compressing objects: 72% (8/11) remote: Compressing objects: 81% (9/11) remote: Compressing objects: 90% (10/11) remote: Compressing objects: 100% (11/11) remote: Compressing objects: 100% (11/11), done. remote: Total 11 (delta 8), reused 0 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: checking out 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by performing another checkout. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -b with the checkout command again. Example: git checkout -b new_branch_name HEAD is now at ecd8664... gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal make: *** [Makefile:2234: buildbottest] Error 2 Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Debian root 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/345/builds/8048 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: angelico-debian-amd64 Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 20, done. remote: Counting objects: 5% (1/20) remote: Counting objects: 10% (2/20) remote: Counting objects: 15% (3/20) remote: Counting objects: 20% (4/20) remote: Counting objects: 25% (5/20) remote: Counting objects: 30% (6/20) remote: Counting objects: 35% (7/20) remote: Counting objects: 40% (8/20) remote: Counting objects: 45% (9/20) remote: Counting objects: 50% (10/20) remote: Counting objects: 55% (11/20) remote: Counting objects: 60% (12/20) remote: Counting objects: 65% (13/20) remote: Counting objects: 70% (14/20) remote: Counting objects: 75% (15/20) remote: Counting objects: 80% (16/20) remote: Counting objects: 85% (17/20) remote: Counting objects: 90% (18/20) remote: Counting objects: 95% (19/20) remote: Counting objects: 100% (20/20) remote: Counting objects: 100% (20/20), done. remote: Compressing objects: 9% (1/11) remote: Compressing objects: 18% (2/11) remote: Compressing objects: 27% (3/11) remote: Compressing objects: 36% (4/11) remote: Compressing objects: 45% (5/11) remote: Compressing objects: 54% (6/11) remote: Compressing objects: 63% (7/11) remote: Compressing objects: 72% (8/11) remote: Compressing objects: 81% (9/11) remote: Compressing objects: 90% (10/11) remote: Compressing objects: 100% (11/11) remote: Compressing objects: 100% (11/11), done. remote: Total 11 (delta 8), reused 0 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at ecd8664f11 gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal configure: WARNING: pkg-config is missing. Some dependencies may not be detected correctly. make: *** [Makefile:2236: buildbottest] Error 2 Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x SLES 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/540/builds/8983 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-sles-z Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 20, done. remote: Counting objects: 5% (1/20) remote: Counting objects: 10% (2/20) remote: Counting objects: 15% (3/20) remote: Counting objects: 20% (4/20) remote: Counting objects: 25% (5/20) remote: Counting objects: 30% (6/20) remote: Counting objects: 35% (7/20) remote: Counting objects: 40% (8/20) remote: Counting objects: 45% (9/20) remote: Counting objects: 50% (10/20) remote: Counting objects: 55% (11/20) remote: Counting objects: 60% (12/20) remote: Counting objects: 65% (13/20) remote: Counting objects: 70% (14/20) remote: Counting objects: 75% (15/20) remote: Counting objects: 80% (16/20) remote: Counting objects: 85% (17/20) remote: Counting objects: 90% (18/20) remote: Counting objects: 95% (19/20) remote: Counting objects: 100% (20/20) remote: Counting objects: 100% (20/20), done. remote: Compressing objects: 9% (1/11) remote: Compressing objects: 18% (2/11) remote: Compressing objects: 27% (3/11) remote: Compressing objects: 36% (4/11) remote: Compressing objects: 45% (5/11) remote: Compressing objects: 54% (6/11) remote: Compressing objects: 63% (7/11) remote: Compressing objects: 72% (8/11) remote: Compressing objects: 81% (9/11) remote: Compressing objects: 90% (10/11) remote: Compressing objects: 100% (11/11) remote: Compressing objects: 100% (11/11), done. remote: Total 11 (delta 8), reused 1 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at ecd8664f112 gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal make: *** [Makefile:2237: buildbottest] Error 2 Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder wasm32-wasi 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1046/builds/5220 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: bcannon-wasi Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 20, done. remote: Counting objects: 5% (1/20) remote: Counting objects: 10% (2/20) remote: Counting objects: 15% (3/20) remote: Counting objects: 20% (4/20) remote: Counting objects: 25% (5/20) remote: Counting objects: 30% (6/20) remote: Counting objects: 35% (7/20) remote: Counting objects: 40% (8/20) remote: Counting objects: 45% (9/20) remote: Counting objects: 50% (10/20) remote: Counting objects: 55% (11/20) remote: Counting objects: 60% (12/20) remote: Counting objects: 65% (13/20) remote: Counting objects: 70% (14/20) remote: Counting objects: 75% (15/20) remote: Counting objects: 80% (16/20) remote: Counting objects: 85% (17/20) remote: Counting objects: 90% (18/20) remote: Counting objects: 95% (19/20) remote: Counting objects: 100% (20/20) remote: Counting objects: 100% (20/20), done. remote: Compressing objects: 9% (1/11) remote: Compressing objects: 18% (2/11) remote: Compressing objects: 27% (3/11) remote: Compressing objects: 36% (4/11) remote: Compressing objects: 45% (5/11) remote: Compressing objects: 54% (6/11) remote: Compressing objects: 63% (7/11) remote: Compressing objects: 72% (8/11) remote: Compressing objects: 81% (9/11) remote: Compressing objects: 90% (10/11) remote: Compressing objects: 100% (11/11) remote: Compressing objects: 100% (11/11), done. remote: Total 11 (delta 8), reused 1 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at ecd8664f11 gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal configure: WARNING: using cross tools not prefixed with host triplet configure: WARNING: no system libmpdecimal found; unable to build _decimal In file included from ../../Modules/md5module.c:46: In file included from ../../Modules/_hacl/Hacl_Hash_MD5.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:130:11: warning: 'htole32' macro redefined [-Wmacro-redefined] 130 | # define htole32(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:43:9: note: previous definition is here 43 | #define htole32(x) (uint32_t)(x) | ^ In file included from ../../Modules/md5module.c:46: In file included from ../../Modules/_hacl/Hacl_Hash_MD5.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:131:11: warning: 'le32toh' macro redefined [-Wmacro-redefined] 131 | # define le32toh(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:44:9: note: previous definition is here 44 | #define le32toh(x) (uint32_t)(x) | ^ In file included from ../../Modules/md5module.c:46: In file included from ../../Modules/_hacl/Hacl_Hash_MD5.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:132:11: warning: 'htobe32' macro redefined [-Wmacro-redefined] 132 | # define htobe32(x) \ | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:37:9: note: previous definition is here 37 | #define htobe32(x) __bswap32(x) | ^ In file included from ../../Modules/md5module.c:46: In file included from ../../Modules/_hacl/Hacl_Hash_MD5.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:138:11: warning: 'be32toh' macro redefined [-Wmacro-redefined] 138 | # define be32toh(x) (htobe32((x))) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:38:9: note: previous definition is here 38 | #define be32toh(x) __bswap32(x) | ^ In file included from ../../Modules/md5module.c:46: In file included from ../../Modules/_hacl/Hacl_Hash_MD5.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:140:11: warning: 'htole64' macro redefined [-Wmacro-redefined] 140 | # define htole64(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:45:9: note: previous definition is here 45 | #define htole64(x) (uint64_t)(x) | ^ In file included from ../../Modules/md5module.c:46: In file included from ../../Modules/_hacl/Hacl_Hash_MD5.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:141:11: warning: 'le64toh' macro redefined [-Wmacro-redefined] 141 | # define le64toh(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:46:9: note: previous definition is here 46 | #define le64toh(x) (uint64_t)(x) | ^ In file included from ../../Modules/md5module.c:46: In file included from ../../Modules/_hacl/Hacl_Hash_MD5.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:142:11: warning: 'htobe64' macro redefined [-Wmacro-redefined] 142 | # define htobe64(x) \ | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:39:9: note: previous definition is here 39 | #define htobe64(x) __bswap64(x) | ^ In file included from ../../Modules/md5module.c:46: In file included from ../../Modules/_hacl/Hacl_Hash_MD5.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:149:11: warning: 'be64toh' macro redefined [-Wmacro-redefined] 149 | # define be64toh(x) (htobe64((x))) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:40:9: note: previous definition is here 40 | #define be64toh(x) __bswap64(x) | ^ 8 warnings generated. In file included from ../../Modules/sha1module.c:47: In file included from ../../Modules/_hacl/Hacl_Hash_SHA1.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:130:11: warning: 'htole32' macro redefined [-Wmacro-redefined] 130 | # define htole32(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:43:9: note: previous definition is here 43 | #define htole32(x) (uint32_t)(x) | ^ In file included from ../../Modules/sha1module.c:47: In file included from ../../Modules/_hacl/Hacl_Hash_SHA1.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:131:11: warning: 'le32toh' macro redefined [-Wmacro-redefined] 131 | # define le32toh(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:44:9: note: previous definition is here 44 | #define le32toh(x) (uint32_t)(x) | ^ In file included from ../../Modules/sha1module.c:47: In file included from ../../Modules/_hacl/Hacl_Hash_SHA1.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:132:11: warning: 'htobe32' macro redefined [-Wmacro-redefined] 132 | # define htobe32(x) \ | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:37:9: note: previous definition is here 37 | #define htobe32(x) __bswap32(x) | ^ In file included from ../../Modules/sha1module.c:47: In file included from ../../Modules/_hacl/Hacl_Hash_SHA1.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:138:11: warning: 'be32toh' macro redefined [-Wmacro-redefined] 138 | # define be32toh(x) (htobe32((x))) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:38:9: note: previous definition is here 38 | #define be32toh(x) __bswap32(x) | ^ In file included from ../../Modules/sha1module.c:47: In file included from ../../Modules/_hacl/Hacl_Hash_SHA1.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:140:11: warning: 'htole64' macro redefined [-Wmacro-redefined] 140 | # define htole64(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:45:9: note: previous definition is here 45 | #define htole64(x) (uint64_t)(x) | ^ In file included from ../../Modules/sha1module.c:47: In file included from ../../Modules/_hacl/Hacl_Hash_SHA1.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:141:11: warning: 'le64toh' macro redefined [-Wmacro-redefined] 141 | # define le64toh(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:46:9: note: previous definition is here 46 | #define le64toh(x) (uint64_t)(x) | ^ In file included from ../../Modules/sha1module.c:47: In file included from ../../Modules/_hacl/Hacl_Hash_SHA1.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:142:11: warning: 'htobe64' macro redefined [-Wmacro-redefined] 142 | # define htobe64(x) \ | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:39:9: note: previous definition is here 39 | #define htobe64(x) __bswap64(x) | ^ In file included from ../../Modules/sha1module.c:47: In file included from ../../Modules/_hacl/Hacl_Hash_SHA1.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:149:11: warning: 'be64toh' macro redefined [-Wmacro-redefined] 149 | # define be64toh(x) (htobe64((x))) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:40:9: note: previous definition is here 40 | #define be64toh(x) __bswap64(x) | ^ 8 warnings generated. In file included from ../../Modules/sha3module.c:59: In file included from ../../Modules/_hacl/Hacl_Hash_SHA3.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:130:11: warning: 'htole32' macro redefined [-Wmacro-redefined] 130 | # define htole32(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:43:9: note: previous definition is here 43 | #define htole32(x) (uint32_t)(x) | ^ In file included from ../../Modules/sha3module.c:59: In file included from ../../Modules/_hacl/Hacl_Hash_SHA3.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:131:11: warning: 'le32toh' macro redefined [-Wmacro-redefined] 131 | # define le32toh(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:44:9: note: previous definition is here 44 | #define le32toh(x) (uint32_t)(x) | ^ In file included from ../../Modules/sha3module.c:59: In file included from ../../Modules/_hacl/Hacl_Hash_SHA3.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:132:11: warning: 'htobe32' macro redefined [-Wmacro-redefined] 132 | # define htobe32(x) \ | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:37:9: note: previous definition is here 37 | #define htobe32(x) __bswap32(x) | ^ In file included from ../../Modules/sha3module.c:59: In file included from ../../Modules/_hacl/Hacl_Hash_SHA3.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:138:11: warning: 'be32toh' macro redefined [-Wmacro-redefined] 138 | # define be32toh(x) (htobe32((x))) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:38:9: note: previous definition is here 38 | #define be32toh(x) __bswap32(x) | ^ In file included from ../../Modules/sha3module.c:59: In file included from ../../Modules/_hacl/Hacl_Hash_SHA3.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:140:11: warning: 'htole64' macro redefined [-Wmacro-redefined] 140 | # define htole64(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:45:9: note: previous definition is here 45 | #define htole64(x) (uint64_t)(x) | ^ In file included from ../../Modules/sha3module.c:59: In file included from ../../Modules/_hacl/Hacl_Hash_SHA3.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:141:11: warning: 'le64toh' macro redefined [-Wmacro-redefined] 141 | # define le64toh(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:46:9: note: previous definition is here 46 | #define le64toh(x) (uint64_t)(x) | ^ In file included from ../../Modules/sha3module.c:59: In file included from ../../Modules/_hacl/Hacl_Hash_SHA3.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:142:11: warning: 'htobe64' macro redefined [-Wmacro-redefined] 142 | # define htobe64(x) \ | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:39:9: note: previous definition is here 39 | #define htobe64(x) __bswap64(x) | ^ In file included from ../../Modules/sha3module.c:59: In file included from ../../Modules/_hacl/Hacl_Hash_SHA3.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:149:11: warning: 'be64toh' macro redefined [-Wmacro-redefined] 149 | # define be64toh(x) (htobe64((x))) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:40:9: note: previous definition is here 40 | #define be64toh(x) __bswap64(x) | ^ 8 warnings generated. ../../Modules/expat/xmlparse.c:7839:11: warning: format specifies type 'int' but the argument has type 'ptrdiff_t' (aka 'long') [-Wformat] 7838 | " (+" EXPAT_FMT_PTRDIFF_T("6") " bytes %s|%d, xmlparse.c:%d) %*s\"", | ~~~~~~~~~~~~~~~~~~~~~~~~ 7839 | bytesMore, (account == XML_ACCOUNT_DIRECT) ? "DIR" : "EXP", | ^~~~~~~~~ 1 warning generated. ../../Modules/_testinternalcapi/test_critical_sections.c:142:1: warning: unused function 'thread_critical_sections' [-Wunused-function] 142 | thread_critical_sections(void *arg) | ^~~~~~~~~~~~~~~~~~~~~~~~ 1 warning generated. ../../Modules/posixmodule.c:7847:1: warning: unused function 'warn_about_fork_with_threads' [-Wunused-function] 7847 | warn_about_fork_with_threads(const char* name) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 warning generated. In file included from ../../Modules/sha2module.c:48: In file included from ../../Modules/_hacl/Hacl_Hash_SHA2.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:130:11: warning: 'htole32' macro redefined [-Wmacro-redefined] 130 | # define htole32(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:43:9: note: previous definition is here 43 | #define htole32(x) (uint32_t)(x) | ^ In file included from ../../Modules/sha2module.c:48: In file included from ../../Modules/_hacl/Hacl_Hash_SHA2.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:131:11: warning: 'le32toh' macro redefined [-Wmacro-redefined] 131 | # define le32toh(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:44:9: note: previous definition is here 44 | #define le32toh(x) (uint32_t)(x) | ^ In file included from ../../Modules/sha2module.c:48: In file included from ../../Modules/_hacl/Hacl_Hash_SHA2.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:132:11: warning: 'htobe32' macro redefined [-Wmacro-redefined] 132 | # define htobe32(x) \ | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:37:9: note: previous definition is here 37 | #define htobe32(x) __bswap32(x) | ^ In file included from ../../Modules/sha2module.c:48: In file included from ../../Modules/_hacl/Hacl_Hash_SHA2.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:138:11: warning: 'be32toh' macro redefined [-Wmacro-redefined] 138 | # define be32toh(x) (htobe32((x))) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:38:9: note: previous definition is here 38 | #define be32toh(x) __bswap32(x) | ^ In file included from ../../Modules/sha2module.c:48: In file included from ../../Modules/_hacl/Hacl_Hash_SHA2.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:140:11: warning: 'htole64' macro redefined [-Wmacro-redefined] 140 | # define htole64(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:45:9: note: previous definition is here 45 | #define htole64(x) (uint64_t)(x) | ^ In file included from ../../Modules/sha2module.c:48: In file included from ../../Modules/_hacl/Hacl_Hash_SHA2.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:141:11: warning: 'le64toh' macro redefined [-Wmacro-redefined] 141 | # define le64toh(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:46:9: note: previous definition is here 46 | #define le64toh(x) (uint64_t)(x) | ^ In file included from ../../Modules/sha2module.c:48: In file included from ../../Modules/_hacl/Hacl_Hash_SHA2.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:142:11: warning: 'htobe64' macro redefined [-Wmacro-redefined] 142 | # define htobe64(x) \ | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:39:9: note: previous definition is here 39 | #define htobe64(x) __bswap64(x) | ^ In file included from ../../Modules/sha2module.c:48: In file included from ../../Modules/_hacl/Hacl_Hash_SHA2.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:149:11: warning: 'be64toh' macro redefined [-Wmacro-redefined] 149 | # define be64toh(x) (htobe64((x))) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:40:9: note: previous definition is here 40 | #define be64toh(x) __bswap64(x) | ^ 8 warnings generated. Kill <WorkerThread #1 running test=test_int pid=3279921 time=25 min> process group make: *** [Makefile:2206: buildbottest] Error 2 Cannot open file '/home/buildbot/buildarea/3.x.bcannon-wasi.wasi.debug/build/build/cross-build/wasm32-wasi/test-results.xml' for upload Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Debian 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/49/builds/9032 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-debian-z Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 20, done. remote: Counting objects: 5% (1/20) remote: Counting objects: 10% (2/20) remote: Counting objects: 15% (3/20) remote: Counting objects: 20% (4/20) remote: Counting objects: 25% (5/20) remote: Counting objects: 30% (6/20) remote: Counting objects: 35% (7/20) remote: Counting objects: 40% (8/20) remote: Counting objects: 45% (9/20) remote: Counting objects: 50% (10/20) remote: Counting objects: 55% (11/20) remote: Counting objects: 60% (12/20) remote: Counting objects: 65% (13/20) remote: Counting objects: 70% (14/20) remote: Counting objects: 75% (15/20) remote: Counting objects: 80% (16/20) remote: Counting objects: 85% (17/20) remote: Counting objects: 90% (18/20) remote: Counting objects: 95% (19/20) remote: Counting objects: 100% (20/20) remote: Counting objects: 100% (20/20), done. remote: Compressing objects: 9% (1/11) remote: Compressing objects: 18% (2/11) remote: Compressing objects: 27% (3/11) remote: Compressing objects: 36% (4/11) remote: Compressing objects: 45% (5/11) remote: Compressing objects: 54% (6/11) remote: Compressing objects: 63% (7/11) remote: Compressing objects: 72% (8/11) remote: Compressing objects: 81% (9/11) remote: Compressing objects: 90% (10/11) remote: Compressing objects: 100% (11/11) remote: Compressing objects: 100% (11/11), done. remote: Total 11 (delta 8), reused 0 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at ecd8664f112 gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal make: *** [Makefile:2240: buildbottest] Error 2 Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder iOS ARM64 Simulator 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1380/builds/342 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: rkm-arm64-ios-simulator Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) (timed out) Summary of the results of the build (if available): =================================================== Captured traceback ================== remote: Enumerating objects: 20, done. remote: Counting objects: 5% (1/20) remote: Counting objects: 10% (2/20) remote: Counting objects: 15% (3/20) remote: Counting objects: 20% (4/20) remote: Counting objects: 25% (5/20) remote: Counting objects: 30% (6/20) remote: Counting objects: 35% (7/20) remote: Counting objects: 40% (8/20) remote: Counting objects: 45% (9/20) remote: Counting objects: 50% (10/20) remote: Counting objects: 55% (11/20) remote: Counting objects: 60% (12/20) remote: Counting objects: 65% (13/20) remote: Counting objects: 70% (14/20) remote: Counting objects: 75% (15/20) remote: Counting objects: 80% (16/20) remote: Counting objects: 85% (17/20) remote: Counting objects: 90% (18/20) remote: Counting objects: 95% (19/20) remote: Counting objects: 100% (20/20) remote: Counting objects: 100% (20/20), done. remote: Compressing objects: 9% (1/11) remote: Compressing objects: 18% (2/11) remote: Compressing objects: 27% (3/11) remote: Compressing objects: 36% (4/11) remote: Compressing objects: 45% (5/11) remote: Compressing objects: 54% (6/11) remote: Compressing objects: 63% (7/11) remote: Compressing objects: 72% (8/11) remote: Compressing objects: 81% (9/11) remote: Compressing objects: 90% (10/11) remote: Compressing objects: 100% (11/11) remote: Compressing objects: 100% (11/11), done. remote: Total 11 (delta 8), reused 0 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at ecd8664f11 gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal configure: WARNING: pkg-config is missing. Some dependencies may not be detected correctly. ../../Python/import.c:1620:1: warning: unused function 'is_core_module' [-Wunused-function] is_core_module(PyInterpreterState *interp, PyObject *name, PyObject *path) ^ 1 warning generated. ../../Python/pystate.c:1135:1: warning: unused function 'check_interpreter_whence' [-Wunused-function] check_interpreter_whence(long whence) ^ 1 warning generated. configure: WARNING: no system libmpdecimal found; unable to build _decimal configure: WARNING: pkg-config is missing. Some dependencies may not be detected correctly. ../../Modules/_sqlite/connection.c:1307:14: warning: 'sqlite3_create_window_function' is only available on iOS 13.0 or newer [-Wunguarded-availability-new] rc = sqlite3_create_window_function(self->db, name, num_params, flags, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator17.4.sdk/usr/include/sqlite3.h:5533:16: note: 'sqlite3_create_window_function' has been marked as being introduced in iOS 13.0 here, but the deployment target is iOS 12.0.0 SQLITE_API int sqlite3_create_window_function( ^ ../../Modules/_sqlite/connection.c:1307:14: note: enclose 'sqlite3_create_window_function' in a __builtin_available check to silence this warning rc = sqlite3_create_window_function(self->db, name, num_params, flags, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../../Modules/_sqlite/connection.c:1315:14: warning: 'sqlite3_create_window_function' is only available on iOS 13.0 or newer [-Wunguarded-availability-new] rc = sqlite3_create_window_function(self->db, name, num_params, flags, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator17.4.sdk/usr/include/sqlite3.h:5533:16: note: 'sqlite3_create_window_function' has been marked as being introduced in iOS 13.0 here, but the deployment target is iOS 12.0.0 SQLITE_API int sqlite3_create_window_function( ^ ../../Modules/_sqlite/connection.c:1315:14: note: enclose 'sqlite3_create_window_function' in a __builtin_available check to silence this warning rc = sqlite3_create_window_function(self->db, name, num_params, flags, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2 warnings generated. --- xcodebuild: WARNING: Using the first of multiple matching destinations: { platform:iOS Simulator, id:5F7D319D-935D-4CEE-9B0F-D3FF2CA2B94F, OS:17.4, name:iPhone SE (3rd generation) } { platform:iOS Simulator, id:5F7D319D-935D-4CEE-9B0F-D3FF2CA2B94F, OS:17.4, name:iPhone SE (3rd generation) } make: *** [testios] Terminated: 15 ** BUILD INTERRUPTED ** Test report =========== Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder wasm32-wasi Non-Debug 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1374/builds/1165 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: bcannon-wasi Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 20, done. remote: Counting objects: 5% (1/20) remote: Counting objects: 10% (2/20) remote: Counting objects: 15% (3/20) remote: Counting objects: 20% (4/20) remote: Counting objects: 25% (5/20) remote: Counting objects: 30% (6/20) remote: Counting objects: 35% (7/20) remote: Counting objects: 40% (8/20) remote: Counting objects: 45% (9/20) remote: Counting objects: 50% (10/20) remote: Counting objects: 55% (11/20) remote: Counting objects: 60% (12/20) remote: Counting objects: 65% (13/20) remote: Counting objects: 70% (14/20) remote: Counting objects: 75% (15/20) remote: Counting objects: 80% (16/20) remote: Counting objects: 85% (17/20) remote: Counting objects: 90% (18/20) remote: Counting objects: 95% (19/20) remote: Counting objects: 100% (20/20) remote: Counting objects: 100% (20/20), done. remote: Compressing objects: 9% (1/11) remote: Compressing objects: 18% (2/11) remote: Compressing objects: 27% (3/11) remote: Compressing objects: 36% (4/11) remote: Compressing objects: 45% (5/11) remote: Compressing objects: 54% (6/11) remote: Compressing objects: 63% (7/11) remote: Compressing objects: 72% (8/11) remote: Compressing objects: 81% (9/11) remote: Compressing objects: 90% (10/11) remote: Compressing objects: 100% (11/11) remote: Compressing objects: 100% (11/11), done. remote: Total 11 (delta 8), reused 1 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at ecd8664f11 gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal configure: WARNING: using cross tools not prefixed with host triplet configure: WARNING: no system libmpdecimal found; unable to build _decimal ../../Python/import.c:1620:1: warning: unused function 'is_core_module' [-Wunused-function] 1620 | is_core_module(PyInterpreterState *interp, PyObject *name, PyObject *path) | ^~~~~~~~~~~~~~ 1 warning generated. ../../Python/pystate.c:1135:1: warning: unused function 'check_interpreter_whence' [-Wunused-function] 1135 | check_interpreter_whence(long whence) | ^~~~~~~~~~~~~~~~~~~~~~~~ 1 warning generated. In file included from ../../Modules/md5module.c:46: In file included from ../../Modules/_hacl/Hacl_Hash_MD5.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:130:11: warning: 'htole32' macro redefined [-Wmacro-redefined] 130 | # define htole32(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:43:9: note: previous definition is here 43 | #define htole32(x) (uint32_t)(x) | ^ In file included from ../../Modules/md5module.c:46: In file included from ../../Modules/_hacl/Hacl_Hash_MD5.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:131:11: warning: 'le32toh' macro redefined [-Wmacro-redefined] 131 | # define le32toh(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:44:9: note: previous definition is here 44 | #define le32toh(x) (uint32_t)(x) | ^ In file included from ../../Modules/md5module.c:46: In file included from ../../Modules/_hacl/Hacl_Hash_MD5.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:132:11: warning: 'htobe32' macro redefined [-Wmacro-redefined] 132 | # define htobe32(x) \ | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:37:9: note: previous definition is here 37 | #define htobe32(x) __bswap32(x) | ^ In file included from ../../Modules/md5module.c:46: In file included from ../../Modules/_hacl/Hacl_Hash_MD5.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:138:11: warning: 'be32toh' macro redefined [-Wmacro-redefined] 138 | # define be32toh(x) (htobe32((x))) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:38:9: note: previous definition is here 38 | #define be32toh(x) __bswap32(x) | ^ In file included from ../../Modules/md5module.c:46: In file included from ../../Modules/_hacl/Hacl_Hash_MD5.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:140:11: warning: 'htole64' macro redefined [-Wmacro-redefined] 140 | # define htole64(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:45:9: note: previous definition is here 45 | #define htole64(x) (uint64_t)(x) | ^ In file included from ../../Modules/md5module.c:46: In file included from ../../Modules/_hacl/Hacl_Hash_MD5.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:141:11: warning: 'le64toh' macro redefined [-Wmacro-redefined] 141 | # define le64toh(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:46:9: note: previous definition is here 46 | #define le64toh(x) (uint64_t)(x) | ^ In file included from ../../Modules/md5module.c:46: In file included from ../../Modules/_hacl/Hacl_Hash_MD5.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:142:11: warning: 'htobe64' macro redefined [-Wmacro-redefined] 142 | # define htobe64(x) \ | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:39:9: note: previous definition is here 39 | #define htobe64(x) __bswap64(x) | ^ In file included from ../../Modules/md5module.c:46: In file included from ../../Modules/_hacl/Hacl_Hash_MD5.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:149:11: warning: 'be64toh' macro redefined [-Wmacro-redefined] 149 | # define be64toh(x) (htobe64((x))) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:40:9: note: previous definition is here 40 | #define be64toh(x) __bswap64(x) | ^ 8 warnings generated. In file included from ../../Modules/sha1module.c:47: In file included from ../../Modules/_hacl/Hacl_Hash_SHA1.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:130:11: warning: 'htole32' macro redefined [-Wmacro-redefined] 130 | # define htole32(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:43:9: note: previous definition is here 43 | #define htole32(x) (uint32_t)(x) | ^ In file included from ../../Modules/sha1module.c:47: In file included from ../../Modules/_hacl/Hacl_Hash_SHA1.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:131:11: warning: 'le32toh' macro redefined [-Wmacro-redefined] 131 | # define le32toh(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:44:9: note: previous definition is here 44 | #define le32toh(x) (uint32_t)(x) | ^ In file included from ../../Modules/sha1module.c:47: In file included from ../../Modules/_hacl/Hacl_Hash_SHA1.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:132:11: warning: 'htobe32' macro redefined [-Wmacro-redefined] 132 | # define htobe32(x) \ | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:37:9: note: previous definition is here 37 | #define htobe32(x) __bswap32(x) | ^ In file included from ../../Modules/sha1module.c:47: In file included from ../../Modules/_hacl/Hacl_Hash_SHA1.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:138:11: warning: 'be32toh' macro redefined [-Wmacro-redefined] 138 | # define be32toh(x) (htobe32((x))) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:38:9: note: previous definition is here 38 | #define be32toh(x) __bswap32(x) | ^ In file included from ../../Modules/sha1module.c:47: In file included from ../../Modules/_hacl/Hacl_Hash_SHA1.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:140:11: warning: 'htole64' macro redefined [-Wmacro-redefined] 140 | # define htole64(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:45:9: note: previous definition is here 45 | #define htole64(x) (uint64_t)(x) | ^ In file included from ../../Modules/sha1module.c:47: In file included from ../../Modules/_hacl/Hacl_Hash_SHA1.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:141:11: warning: 'le64toh' macro redefined [-Wmacro-redefined] 141 | # define le64toh(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:46:9: note: previous definition is here 46 | #define le64toh(x) (uint64_t)(x) | ^ In file included from ../../Modules/sha1module.c:47: In file included from ../../Modules/_hacl/Hacl_Hash_SHA1.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:142:11: warning: 'htobe64' macro redefined [-Wmacro-redefined] 142 | # define htobe64(x) \ | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:39:9: note: previous definition is here 39 | #define htobe64(x) __bswap64(x) | ^ In file included from ../../Modules/sha1module.c:47: In file included from ../../Modules/_hacl/Hacl_Hash_SHA1.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:149:11: warning: 'be64toh' macro redefined [-Wmacro-redefined] 149 | # define be64toh(x) (htobe64((x))) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:40:9: note: previous definition is here 40 | #define be64toh(x) __bswap64(x) | ^ 8 warnings generated. In file included from ../../Modules/sha3module.c:59: In file included from ../../Modules/_hacl/Hacl_Hash_SHA3.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:130:11: warning: 'htole32' macro redefined [-Wmacro-redefined] 130 | # define htole32(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:43:9: note: previous definition is here 43 | #define htole32(x) (uint32_t)(x) | ^ In file included from ../../Modules/sha3module.c:59: In file included from ../../Modules/_hacl/Hacl_Hash_SHA3.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:131:11: warning: 'le32toh' macro redefined [-Wmacro-redefined] 131 | # define le32toh(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:44:9: note: previous definition is here 44 | #define le32toh(x) (uint32_t)(x) | ^ In file included from ../../Modules/sha3module.c:59: In file included from ../../Modules/_hacl/Hacl_Hash_SHA3.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:132:11: warning: 'htobe32' macro redefined [-Wmacro-redefined] 132 | # define htobe32(x) \ | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:37:9: note: previous definition is here 37 | #define htobe32(x) __bswap32(x) | ^ In file included from ../../Modules/sha3module.c:59: In file included from ../../Modules/_hacl/Hacl_Hash_SHA3.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:138:11: warning: 'be32toh' macro redefined [-Wmacro-redefined] 138 | # define be32toh(x) (htobe32((x))) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:38:9: note: previous definition is here 38 | #define be32toh(x) __bswap32(x) | ^ In file included from ../../Modules/sha3module.c:59: In file included from ../../Modules/_hacl/Hacl_Hash_SHA3.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:140:11: warning: 'htole64' macro redefined [-Wmacro-redefined] 140 | # define htole64(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:45:9: note: previous definition is here 45 | #define htole64(x) (uint64_t)(x) | ^ In file included from ../../Modules/sha3module.c:59: In file included from ../../Modules/_hacl/Hacl_Hash_SHA3.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:141:11: warning: 'le64toh' macro redefined [-Wmacro-redefined] 141 | # define le64toh(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:46:9: note: previous definition is here 46 | #define le64toh(x) (uint64_t)(x) | ^ In file included from ../../Modules/sha3module.c:59: In file included from ../../Modules/_hacl/Hacl_Hash_SHA3.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:142:11: warning: 'htobe64' macro redefined [-Wmacro-redefined] 142 | # define htobe64(x) \ | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:39:9: note: previous definition is here 39 | #define htobe64(x) __bswap64(x) | ^ In file included from ../../Modules/sha3module.c:59: In file included from ../../Modules/_hacl/Hacl_Hash_SHA3.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:149:11: warning: 'be64toh' macro redefined [-Wmacro-redefined] 149 | # define be64toh(x) (htobe64((x))) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:40:9: note: previous definition is here 40 | #define be64toh(x) __bswap64(x) | ^ 8 warnings generated. ../../Modules/expat/xmlparse.c:7839:11: warning: format specifies type 'int' but the argument has type 'ptrdiff_t' (aka 'long') [-Wformat] 7838 | " (+" EXPAT_FMT_PTRDIFF_T("6") " bytes %s|%d, xmlparse.c:%d) %*s\"", | ~~~~~~~~~~~~~~~~~~~~~~~~ 7839 | bytesMore, (account == XML_ACCOUNT_DIRECT) ? "DIR" : "EXP", | ^~~~~~~~~ 1 warning generated. ../../Modules/_testinternalcapi/test_critical_sections.c:142:1: warning: unused function 'thread_critical_sections' [-Wunused-function] 142 | thread_critical_sections(void *arg) | ^~~~~~~~~~~~~~~~~~~~~~~~ 1 warning generated. ../../Modules/posixmodule.c:7847:1: warning: unused function 'warn_about_fork_with_threads' [-Wunused-function] 7847 | warn_about_fork_with_threads(const char* name) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 warning generated. cat: pybuilddir.txt: No such file or directory In file included from ../../Modules/sha2module.c:48: In file included from ../../Modules/_hacl/Hacl_Hash_SHA2.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:130:11: warning: 'htole32' macro redefined [-Wmacro-redefined] 130 | # define htole32(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:43:9: note: previous definition is here 43 | #define htole32(x) (uint32_t)(x) | ^ In file included from ../../Modules/sha2module.c:48: In file included from ../../Modules/_hacl/Hacl_Hash_SHA2.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:131:11: warning: 'le32toh' macro redefined [-Wmacro-redefined] 131 | # define le32toh(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:44:9: note: previous definition is here 44 | #define le32toh(x) (uint32_t)(x) | ^ In file included from ../../Modules/sha2module.c:48: In file included from ../../Modules/_hacl/Hacl_Hash_SHA2.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:132:11: warning: 'htobe32' macro redefined [-Wmacro-redefined] 132 | # define htobe32(x) \ | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:37:9: note: previous definition is here 37 | #define htobe32(x) __bswap32(x) | ^ In file included from ../../Modules/sha2module.c:48: In file included from ../../Modules/_hacl/Hacl_Hash_SHA2.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:138:11: warning: 'be32toh' macro redefined [-Wmacro-redefined] 138 | # define be32toh(x) (htobe32((x))) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:38:9: note: previous definition is here 38 | #define be32toh(x) __bswap32(x) | ^ In file included from ../../Modules/sha2module.c:48: In file included from ../../Modules/_hacl/Hacl_Hash_SHA2.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:140:11: warning: 'htole64' macro redefined [-Wmacro-redefined] 140 | # define htole64(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:45:9: note: previous definition is here 45 | #define htole64(x) (uint64_t)(x) | ^ In file included from ../../Modules/sha2module.c:48: In file included from ../../Modules/_hacl/Hacl_Hash_SHA2.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:141:11: warning: 'le64toh' macro redefined [-Wmacro-redefined] 141 | # define le64toh(x) (x) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:46:9: note: previous definition is here 46 | #define le64toh(x) (uint64_t)(x) | ^ In file included from ../../Modules/sha2module.c:48: In file included from ../../Modules/_hacl/Hacl_Hash_SHA2.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:142:11: warning: 'htobe64' macro redefined [-Wmacro-redefined] 142 | # define htobe64(x) \ | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:39:9: note: previous definition is here 39 | #define htobe64(x) __bswap64(x) | ^ In file included from ../../Modules/sha2module.c:48: In file included from ../../Modules/_hacl/Hacl_Hash_SHA2.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:149:11: warning: 'be64toh' macro redefined [-Wmacro-redefined] 149 | # define be64toh(x) (htobe64((x))) | ^ /opt/wasi-sdk-21.0/bin/../share/wasi-sysroot/include/endian.h:40:9: note: previous definition is here 40 | #define be64toh(x) __bswap64(x) | ^ 8 warnings generated. Kill <WorkerThread #2 running test=test_int pid=3260082 time=25 min> process group make: *** [Makefile:2206: buildbottest] Error 2 Cannot open file '/home/buildbot/buildarea/3.x.bcannon-wasi.wasi.nondebug/build/build/build_oot/host/test-results.xml' for upload Test report =========== Failed tests: - test_int Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder wasm32 WASI 8Core 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1344/builds/1825 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: kushaldas-wasi Build Reason: <unknown> Blamelist: Tim Peters <tim.peters(a)gmail.com> BUILD FAILED: failed test (failure) uploading test-results.xml (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 20, done. remote: Counting objects: 5% (1/20) remote: Counting objects: 10% (2/20) remote: Counting objects: 15% (3/20) remote: Counting objects: 20% (4/20) remote: Counting objects: 25% (5/20) remote: Counting objects: 30% (6/20) remote: Counting objects: 35% (7/20) remote: Counting objects: 40% (8/20) remote: Counting objects: 45% (9/20) remote: Counting objects: 50% (10/20) remote: Counting objects: 55% (11/20) remote: Counting objects: 60% (12/20) remote: Counting objects: 65% (13/20) remote: Counting objects: 70% (14/20) remote: Counting objects: 75% (15/20) remote: Counting objects: 80% (16/20) remote: Counting objects: 85% (17/20) remote: Counting objects: 90% (18/20) remote: Counting objects: 95% (19/20) remote: Counting objects: 100% (20/20) remote: Counting objects: 100% (20/20), done. remote: Compressing objects: 9% (1/11) remote: Compressing objects: 18% (2/11) remote: Compressing objects: 27% (3/11) remote: Compressing objects: 36% (4/11) remote: Compressing objects: 45% (5/11) remote: Compressing objects: 54% (6/11) remote: Compressing objects: 63% (7/11) remote: Compressing objects: 72% (8/11) remote: Compressing objects: 81% (9/11) remote: Compressing objects: 90% (10/11) remote: Compressing objects: 100% (11/11) remote: Compressing objects: 100% (11/11), done. remote: Total 11 (delta 8), reused 0 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'ecd8664f11298a1a4f7428363c55ad2904c9f279'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at ecd8664f11 gh-118750: Asymptotically faster `int(string)` (#118751) Switched to and reset branch 'main' configure: WARNING: no system libmpdecimal found; unable to build _decimal configure: WARNING: using cross tools not prefixed with host triplet configure: WARNING: no system libmpdecimal found; unable to build _decimal ../../Python/import.c:1620:1: warning: unused function 'is_core_module' [-Wunused-function] 1620 | is_core_module(PyInterpreterState *interp, PyObject *name, PyObject *path) | ^~~~~~~~~~~~~~ 1 warning generated. ../../Python/pystate.c:1135:1: warning: unused function 'check_interpreter_whence' [-Wunused-function] 1135 | check_interpreter_whence(long whence) | ^~~~~~~~~~~~~~~~~~~~~~~~ 1 warning generated. In file included from ../../Modules/md5module.c:46: In file included from ../../Modules/_hacl/Hacl_Hash_MD5.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:130:11: warning: 'htole32' macro redefined [-Wmacro-redefined] 130 | # define htole32(x) (x) | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:43:9: note: previous definition is here 43 | #define htole32(x) (uint32_t)(x) | ^ In file included from ../../Modules/md5module.c:46: In file included from ../../Modules/_hacl/Hacl_Hash_MD5.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:131:11: warning: 'le32toh' macro redefined [-Wmacro-redefined] 131 | # define le32toh(x) (x) | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:44:9: note: previous definition is here 44 | #define le32toh(x) (uint32_t)(x) | ^ In file included from ../../Modules/md5module.c:46: In file included from ../../Modules/_hacl/Hacl_Hash_MD5.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:132:11: warning: 'htobe32' macro redefined [-Wmacro-redefined] 132 | # define htobe32(x) \ | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:37:9: note: previous definition is here 37 | #define htobe32(x) __bswap32(x) | ^ In file included from ../../Modules/md5module.c:46: In file included from ../../Modules/_hacl/Hacl_Hash_MD5.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:138:11: warning: 'be32toh' macro redefined [-Wmacro-redefined] 138 | # define be32toh(x) (htobe32((x))) | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:38:9: note: previous definition is here 38 | #define be32toh(x) __bswap32(x) | ^ In file included from ../../Modules/md5module.c:46: In file included from ../../Modules/_hacl/Hacl_Hash_MD5.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:140:11: warning: 'htole64' macro redefined [-Wmacro-redefined] 140 | # define htole64(x) (x) | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:45:9: note: previous definition is here 45 | #define htole64(x) (uint64_t)(x) | ^ In file included from ../../Modules/md5module.c:46: In file included from ../../Modules/_hacl/Hacl_Hash_MD5.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:141:11: warning: 'le64toh' macro redefined [-Wmacro-redefined] 141 | # define le64toh(x) (x) | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:46:9: note: previous definition is here 46 | #define le64toh(x) (uint64_t)(x) | ^ In file included from ../../Modules/md5module.c:46: In file included from ../../Modules/_hacl/Hacl_Hash_MD5.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:142:11: warning: 'htobe64' macro redefined [-Wmacro-redefined] 142 | # define htobe64(x) \ | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:39:9: note: previous definition is here 39 | #define htobe64(x) __bswap64(x) | ^ In file included from ../../Modules/md5module.c:46: In file included from ../../Modules/_hacl/Hacl_Hash_MD5.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:149:11: warning: 'be64toh' macro redefined [-Wmacro-redefined] 149 | # define be64toh(x) (htobe64((x))) | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:40:9: note: previous definition is here 40 | #define be64toh(x) __bswap64(x) | ^ 8 warnings generated. In file included from ../../Modules/sha1module.c:47: In file included from ../../Modules/_hacl/Hacl_Hash_SHA1.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:130:11: warning: 'htole32' macro redefined [-Wmacro-redefined] 130 | # define htole32(x) (x) | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:43:9: note: previous definition is here 43 | #define htole32(x) (uint32_t)(x) | ^ In file included from ../../Modules/sha1module.c:47: In file included from ../../Modules/_hacl/Hacl_Hash_SHA1.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:131:11: warning: 'le32toh' macro redefined [-Wmacro-redefined] 131 | # define le32toh(x) (x) | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:44:9: note: previous definition is here 44 | #define le32toh(x) (uint32_t)(x) | ^ In file included from ../../Modules/sha1module.c:47: In file included from ../../Modules/_hacl/Hacl_Hash_SHA1.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:132:11: warning: 'htobe32' macro redefined [-Wmacro-redefined] 132 | # define htobe32(x) \ | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:37:9: note: previous definition is here 37 | #define htobe32(x) __bswap32(x) | ^ In file included from ../../Modules/sha1module.c:47: In file included from ../../Modules/_hacl/Hacl_Hash_SHA1.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:138:11: warning: 'be32toh' macro redefined [-Wmacro-redefined] 138 | # define be32toh(x) (htobe32((x))) | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:38:9: note: previous definition is here 38 | #define be32toh(x) __bswap32(x) | ^ In file included from ../../Modules/sha1module.c:47: In file included from ../../Modules/_hacl/Hacl_Hash_SHA1.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:140:11: warning: 'htole64' macro redefined [-Wmacro-redefined] 140 | # define htole64(x) (x) | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:45:9: note: previous definition is here 45 | #define htole64(x) (uint64_t)(x) | ^ In file included from ../../Modules/sha1module.c:47: In file included from ../../Modules/_hacl/Hacl_Hash_SHA1.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:141:11: warning: 'le64toh' macro redefined [-Wmacro-redefined] 141 | # define le64toh(x) (x) | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:46:9: note: previous definition is here 46 | #define le64toh(x) (uint64_t)(x) | ^ In file included from ../../Modules/sha1module.c:47: In file included from ../../Modules/_hacl/Hacl_Hash_SHA1.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:142:11: warning: 'htobe64' macro redefined [-Wmacro-redefined] 142 | # define htobe64(x) \ | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:39:9: note: previous definition is here 39 | #define htobe64(x) __bswap64(x) | ^ In file included from ../../Modules/sha1module.c:47: In file included from ../../Modules/_hacl/Hacl_Hash_SHA1.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:149:11: warning: 'be64toh' macro redefined [-Wmacro-redefined] 149 | # define be64toh(x) (htobe64((x))) | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:40:9: note: previous definition is here 40 | #define be64toh(x) __bswap64(x) | ^ 8 warnings generated. In file included from ../../Modules/sha3module.c:59: In file included from ../../Modules/_hacl/Hacl_Hash_SHA3.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:130:11: warning: 'htole32' macro redefined [-Wmacro-redefined] 130 | # define htole32(x) (x) | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:43:9: note: previous definition is here 43 | #define htole32(x) (uint32_t)(x) | ^ In file included from ../../Modules/sha3module.c:59: In file included from ../../Modules/_hacl/Hacl_Hash_SHA3.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:131:11: warning: 'le32toh' macro redefined [-Wmacro-redefined] 131 | # define le32toh(x) (x) | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:44:9: note: previous definition is here 44 | #define le32toh(x) (uint32_t)(x) | ^ In file included from ../../Modules/sha3module.c:59: In file included from ../../Modules/_hacl/Hacl_Hash_SHA3.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:132:11: warning: 'htobe32' macro redefined [-Wmacro-redefined] 132 | # define htobe32(x) \ | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:37:9: note: previous definition is here 37 | #define htobe32(x) __bswap32(x) | ^ In file included from ../../Modules/sha3module.c:59: In file included from ../../Modules/_hacl/Hacl_Hash_SHA3.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:138:11: warning: 'be32toh' macro redefined [-Wmacro-redefined] 138 | # define be32toh(x) (htobe32((x))) | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:38:9: note: previous definition is here 38 | #define be32toh(x) __bswap32(x) | ^ In file included from ../../Modules/sha3module.c:59: In file included from ../../Modules/_hacl/Hacl_Hash_SHA3.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:140:11: warning: 'htole64' macro redefined [-Wmacro-redefined] 140 | # define htole64(x) (x) | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:45:9: note: previous definition is here 45 | #define htole64(x) (uint64_t)(x) | ^ In file included from ../../Modules/sha3module.c:59: In file included from ../../Modules/_hacl/Hacl_Hash_SHA3.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:141:11: warning: 'le64toh' macro redefined [-Wmacro-redefined] 141 | # define le64toh(x) (x) | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:46:9: note: previous definition is here 46 | #define le64toh(x) (uint64_t)(x) | ^ In file included from ../../Modules/sha3module.c:59: In file included from ../../Modules/_hacl/Hacl_Hash_SHA3.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:142:11: warning: 'htobe64' macro redefined [-Wmacro-redefined] 142 | # define htobe64(x) \ | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:39:9: note: previous definition is here 39 | #define htobe64(x) __bswap64(x) | ^ In file included from ../../Modules/sha3module.c:59: In file included from ../../Modules/_hacl/Hacl_Hash_SHA3.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:149:11: warning: 'be64toh' macro redefined [-Wmacro-redefined] 149 | # define be64toh(x) (htobe64((x))) | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:40:9: note: previous definition is here 40 | #define be64toh(x) __bswap64(x) | ^ 8 warnings generated. ../../Modules/expat/xmlparse.c:7839:11: warning: format specifies type 'int' but the argument has type 'ptrdiff_t' (aka 'long') [-Wformat] 7838 | " (+" EXPAT_FMT_PTRDIFF_T("6") " bytes %s|%d, xmlparse.c:%d) %*s\"", | ~~~~~~~~~~~~~~~~~~~~~~~~ 7839 | bytesMore, (account == XML_ACCOUNT_DIRECT) ? "DIR" : "EXP", | ^~~~~~~~~ 1 warning generated. ../../Modules/_testinternalcapi/test_critical_sections.c:142:1: warning: unused function 'thread_critical_sections' [-Wunused-function] 142 | thread_critical_sections(void *arg) | ^~~~~~~~~~~~~~~~~~~~~~~~ 1 warning generated. ../../Modules/posixmodule.c:7847:1: warning: unused function 'warn_about_fork_with_threads' [-Wunused-function] 7847 | warn_about_fork_with_threads(const char* name) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 warning generated. cat: pybuilddir.txt: No such file or directory In file included from ../../Modules/sha2module.c:48: In file included from ../../Modules/_hacl/Hacl_Hash_SHA2.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:130:11: warning: 'htole32' macro redefined [-Wmacro-redefined] 130 | # define htole32(x) (x) | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:43:9: note: previous definition is here 43 | #define htole32(x) (uint32_t)(x) | ^ In file included from ../../Modules/sha2module.c:48: In file included from ../../Modules/_hacl/Hacl_Hash_SHA2.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:131:11: warning: 'le32toh' macro redefined [-Wmacro-redefined] 131 | # define le32toh(x) (x) | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:44:9: note: previous definition is here 44 | #define le32toh(x) (uint32_t)(x) | ^ In file included from ../../Modules/sha2module.c:48: In file included from ../../Modules/_hacl/Hacl_Hash_SHA2.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:132:11: warning: 'htobe32' macro redefined [-Wmacro-redefined] 132 | # define htobe32(x) \ | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:37:9: note: previous definition is here 37 | #define htobe32(x) __bswap32(x) | ^ In file included from ../../Modules/sha2module.c:48: In file included from ../../Modules/_hacl/Hacl_Hash_SHA2.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:138:11: warning: 'be32toh' macro redefined [-Wmacro-redefined] 138 | # define be32toh(x) (htobe32((x))) | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:38:9: note: previous definition is here 38 | #define be32toh(x) __bswap32(x) | ^ In file included from ../../Modules/sha2module.c:48: In file included from ../../Modules/_hacl/Hacl_Hash_SHA2.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:140:11: warning: 'htole64' macro redefined [-Wmacro-redefined] 140 | # define htole64(x) (x) | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:45:9: note: previous definition is here 45 | #define htole64(x) (uint64_t)(x) | ^ In file included from ../../Modules/sha2module.c:48: In file included from ../../Modules/_hacl/Hacl_Hash_SHA2.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:141:11: warning: 'le64toh' macro redefined [-Wmacro-redefined] 141 | # define le64toh(x) (x) | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:46:9: note: previous definition is here 46 | #define le64toh(x) (uint64_t)(x) | ^ In file included from ../../Modules/sha2module.c:48: In file included from ../../Modules/_hacl/Hacl_Hash_SHA2.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:142:11: warning: 'htobe64' macro redefined [-Wmacro-redefined] 142 | # define htobe64(x) \ | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:39:9: note: previous definition is here 39 | #define htobe64(x) __bswap64(x) | ^ In file included from ../../Modules/sha2module.c:48: In file included from ../../Modules/_hacl/Hacl_Hash_SHA2.h:35: In file included from ../../Modules/_hacl/include/krml/types.h:12: ../../Modules/_hacl/include/krml/lowstar_endianness.h:149:11: warning: 'be64toh' macro redefined [-Wmacro-redefined] 149 | # define be64toh(x) (htobe64((x))) | ^ /opt/wasi-sdk/bin/../share/wasi-sysroot/include/endian.h:40:9: note: previous definition is here 40 | #define be64toh(x) __bswap64(x) | ^ 8 warnings generated. Kill <WorkerThread #4 running test=test_int pid=2269573 time=25 min> process group make: *** [Makefile:2206: buildbottest] Error 2 Cannot open file '/opt/buildbot/kushaldas-wasm/3.x.kushaldas-wasi.wasi.nondebug/build/build/build_oot/host/test-results.xml' for upload Test report =========== Failed tests: - test_int Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) (main)
by buildbot＠python.org 18 May '24

18 May '24

The Buildbot has detected a new failure on builder AMD64 Ubuntu NoGIL 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1225/builds/2280 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: itamaro-ubuntu-aws Build Reason: <unknown> Blamelist: Donghee Na <donghee.na(a)python.org>, Kirill Podoprigora <kirill.bast9(a)mail.ru>, Lysandros Nikolaou <lisandrosnik(a)gmail.com>, Nice Zombies <nineteendo19d0(a)gmail.com>, Rafael Fontenelle <rffontenelle(a)users.noreply.github.com>, Raymond Hettinger <rhettinger(a)users.noreply.github.com>, Victor Stinner <vstinner(a)python.org>, Xie Yanbo <xieyanbo(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.nogil/build/Lib/test/_test_multiprocessing.py", line 5176, in test_wait_integer self.assertLess(delta, expected + 2) ~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^ AssertionError: 5.071847717277706 not less than 5 Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.nogil/build/Lib/multiprocessing/process.py", line 313, in _bootstrap self.run() ~~~~~~~~^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.nogil/build/Lib/multiprocessing/process.py", line 108, in run self._target(*self._args, **self._kwargs) ~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.nogil/build/Lib/test/_test_multiprocessing.py", line 5329, in child join_process(p) ~~~~~~~~~~~~^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.nogil/build/Lib/test/_test_multiprocessing.py", line 104, in join_process threading_helper.join_thread(process) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.nogil/build/Lib/test/support/threading_helper.py", line 116, in join_thread raise AssertionError(msg) AssertionError: failed to join the thread in 30.0 seconds k Test report =========== Failed tests: - test_tools - test.test_multiprocessing_spawn.test_misc - test_math Failed subtests: - test_wait_integer - test.test_multiprocessing_spawn.test_misc.TestWait.test_wait_integer Sincerely, -The Buildbot

1 0