Debugging .NET assembly from Python 3
Hi, Using Visual Studio 2015, I have a Python project and a C# DLL project.
From the Python code, I import and call functions from the C# class. When running in Debug, I am able to stop at breakpoints in the Python code, but not in the C# code. The debugger jumps over the calls as if no symbols were loaded.
I would like to know if it is possible to stop at breakpoints in the C# code and how to setup it in Visual Studio. This feature works when using IronPython, but we want to use PythonDotNet from Miniconda3. Thanks Ludovic
There are many conversations (both codeplex and github) recorded in issue tracker for PTVS about debugging pythonnet code. The starting point is to ensure that you are on .NET 4+, select manually managed, native, and python debugger engines. Also make sure that managed compatibility mode is not selected. Finally make sure that your python debug symbols are available to PTVS/VS for cross-language debugging. Note that currently the PTVS remote debugger is not working for pythonnet when debugging python code. On Tue, Jun 7, 2016 at 3:20 AM, Pochon-Guérin Ludovic < Ludovic.Pochon-Guerin@statkraft.com> wrote:
Hi,
Using Visual Studio 2015, I have a Python project and a C# DLL project.
From the Python code, I import and call functions from the C# class.
When running in Debug, I am able to stop at breakpoints in the Python code, but not in the C# code.
The debugger jumps over the calls as if no symbols were loaded.
I would like to know if it is possible to stop at breakpoints in the C# code and how to setup it in Visual Studio.
This feature works when using IronPython, but we want to use PythonDotNet from Miniconda3.
Thanks
Ludovic
_________________________________________________ Python.NET mailing list - PythonDotNet@python.org https://mail.python.org/mailman/listinfo/pythondotnet
Thank you for your answer, I tried all of this without success. What do you mean by “select manually managed debugger”? Please can you clarify if it is possible to stop at breakpoints in C# code when called from Python code (using python dot net)? Thanks Ludovic From: PythonDotNet [mailto:pythondotnet-bounces+ludovic.pochon-guerin=statkraft.com@python.org] On Behalf Of Denis Akhiyarov Sent: 8. juni 2016 08:32 To: A list for users and developers of Python for .NET Subject: Re: [Python.NET] Debugging .NET assembly from Python 3 There are many conversations (both codeplex and github) recorded in issue tracker for PTVS about debugging pythonnet code. The starting point is to ensure that you are on .NET 4+, select manually managed, native, and python debugger engines. Also make sure that managed compatibility mode is not selected. Finally make sure that your python debug symbols are available to PTVS/VS for cross-language debugging. Note that currently the PTVS remote debugger is not working for pythonnet when debugging python code. On Tue, Jun 7, 2016 at 3:20 AM, Pochon-Guérin Ludovic <Ludovic.Pochon-Guerin@statkraft.com<mailto:Ludovic.Pochon-Guerin@statkraft.com>> wrote: Hi, Using Visual Studio 2015, I have a Python project and a C# DLL project. From the Python code, I import and call functions from the C# class. When running in Debug, I am able to stop at breakpoints in the Python code, but not in the C# code. The debugger jumps over the calls as if no symbols were loaded. I would like to know if it is possible to stop at breakpoints in the C# code and how to setup it in Visual Studio. This feature works when using IronPython, but we want to use PythonDotNet from Miniconda3. Thanks Ludovic _________________________________________________ Python.NET mailing list - PythonDotNet@python.org<mailto:PythonDotNet@python.org> https://mail.python.org/mailman/listinfo/pythondotnet
I regularly debugging C# code called from python side using pythonnet. So something is likely wrong in your settings. Here is how you set debugger engines (see picture in the comments): https://github.com/Microsoft/PTVS/issues/674 This mailing list is super-slowly approved for new messages. You may get much faster and better response on PTVS issue tracker: https://github.com/Microsoft/PTVS/issues/new Just provide Microsoft Python team with reproducible example. Also mention what symbols you see in Debugger "Modules" window. If issue is very specific to pythonnet and works on ironpython, then you can use pythonnet issue tracker: https://github.com/pythonnet/pythonnet/issues/new Note that PTVS has very specialized code for debugging IronPython, while pythonnet debugging happens through CPython debugger. On Tue, Jun 14, 2016 at 4:46 AM, Pochon-Guérin Ludovic < Ludovic.Pochon-Guerin@statkraft.com> wrote:
Thank you for your answer,
I tried all of this without success.
What do you mean by “select manually managed debugger”?
Please can you clarify if it is possible to stop at breakpoints in C# code when called from Python code (using python dot net)?
Thanks
Ludovic
*From:* PythonDotNet [mailto:pythondotnet-bounces+ludovic.pochon-guerin= statkraft.com@python.org] *On Behalf Of *Denis Akhiyarov *Sent:* 8. juni 2016 08:32 *To:* A list for users and developers of Python for .NET *Subject:* Re: [Python.NET] Debugging .NET assembly from Python 3
There are many conversations (both codeplex and github) recorded in issue tracker for PTVS about debugging pythonnet code.
The starting point is to ensure that you are on .NET 4+, select manually managed, native, and python debugger engines. Also make sure that managed compatibility mode is not selected. Finally make sure that your python debug symbols are available to PTVS/VS for cross-language debugging.
Note that currently the PTVS remote debugger is not working for pythonnet when debugging python code.
On Tue, Jun 7, 2016 at 3:20 AM, Pochon-Guérin Ludovic < Ludovic.Pochon-Guerin@statkraft.com> wrote:
Hi,
Using Visual Studio 2015, I have a Python project and a C# DLL project.
From the Python code, I import and call functions from the C# class.
When running in Debug, I am able to stop at breakpoints in the Python code, but not in the C# code.
The debugger jumps over the calls as if no symbols were loaded.
I would like to know if it is possible to stop at breakpoints in the C# code and how to setup it in Visual Studio.
This feature works when using IronPython, but we want to use PythonDotNet from Miniconda3.
Thanks
Ludovic
_________________________________________________ Python.NET mailing list - PythonDotNet@python.org https://mail.python.org/mailman/listinfo/pythondotnet
_________________________________________________ Python.NET mailing list - PythonDotNet@python.org https://mail.python.org/mailman/listinfo/pythondotnet
Thank you for your help. It is not possible to attach to the Python process the way explained in PTVS discussion, because it is greyed. I think it is because I am already running the python process when starting debugger from python file in Visual Studio I think my problem is due to the Python environment. I use Miniconda3 and not CPython interpreter in Visual Studio. It might be something to do with the CLR module too. Unfortunately I don’t have time to investigate further and will have to work without debugging for the time being. Thanks anyway Ludovic From: PythonDotNet [mailto:pythondotnet-bounces+ludovic.pochon-guerin=statkraft.com@python.org] On Behalf Of Denis Akhiyarov Sent: 14. juni 2016 16:49 To: A list for users and developers of Python for .NET Subject: Re: [Python.NET] Debugging .NET assembly from Python 3 I regularly debugging C# code called from python side using pythonnet. So something is likely wrong in your settings. Here is how you set debugger engines (see picture in the comments): https://github.com/Microsoft/PTVS/issues/674 This mailing list is super-slowly approved for new messages. You may get much faster and better response on PTVS issue tracker: https://github.com/Microsoft/PTVS/issues/new Just provide Microsoft Python team with reproducible example. Also mention what symbols you see in Debugger "Modules" window. If issue is very specific to pythonnet and works on ironpython, then you can use pythonnet issue tracker: https://github.com/pythonnet/pythonnet/issues/new Note that PTVS has very specialized code for debugging IronPython, while pythonnet debugging happens through CPython debugger. On Tue, Jun 14, 2016 at 4:46 AM, Pochon-Guérin Ludovic <Ludovic.Pochon-Guerin@statkraft.com<mailto:Ludovic.Pochon-Guerin@statkraft.com>> wrote: Thank you for your answer, I tried all of this without success. What do you mean by “select manually managed debugger”? Please can you clarify if it is possible to stop at breakpoints in C# code when called from Python code (using python dot net)? Thanks Ludovic From: PythonDotNet [mailto:pythondotnet-bounces+ludovic.pochon-guerin<mailto:pythondotnet-bounces%2Bludovic.pochon-guerin>=statkraft.com@python.org<mailto:statkraft.com@python.org>] On Behalf Of Denis Akhiyarov Sent: 8. juni 2016 08:32 To: A list for users and developers of Python for .NET Subject: Re: [Python.NET] Debugging .NET assembly from Python 3 There are many conversations (both codeplex and github) recorded in issue tracker for PTVS about debugging pythonnet code. The starting point is to ensure that you are on .NET 4+, select manually managed, native, and python debugger engines. Also make sure that managed compatibility mode is not selected. Finally make sure that your python debug symbols are available to PTVS/VS for cross-language debugging. Note that currently the PTVS remote debugger is not working for pythonnet when debugging python code. On Tue, Jun 7, 2016 at 3:20 AM, Pochon-Guérin Ludovic <Ludovic.Pochon-Guerin@statkraft.com<mailto:Ludovic.Pochon-Guerin@statkraft.com>> wrote: Hi, Using Visual Studio 2015, I have a Python project and a C# DLL project. From the Python code, I import and call functions from the C# class. When running in Debug, I am able to stop at breakpoints in the Python code, but not in the C# code. The debugger jumps over the calls as if no symbols were loaded. I would like to know if it is possible to stop at breakpoints in the C# code and how to setup it in Visual Studio. This feature works when using IronPython, but we want to use PythonDotNet from Miniconda3. Thanks Ludovic _________________________________________________ Python.NET mailing list - PythonDotNet@python.org<mailto:PythonDotNet@python.org> https://mail.python.org/mailman/listinfo/pythondotnet _________________________________________________ Python.NET mailing list - PythonDotNet@python.org<mailto:PythonDotNet@python.org> https://mail.python.org/mailman/listinfo/pythondotnet
@ *Pochon-Guérin Ludovic* just to clarify: to debug C# code called using pythonnet from CPython in PTVS you need to select ONLY "Managed" debugger engine. By default it selects "Managed + Python" which does not work. It is possible to get Managed + Native + CPython mixed- mode debugging working, but this requires additional steps. If you follow my steps and still experience issues, than please provide me with a simple reproducible example: C# + Python code. Note that there should not be any problem with Miniconda/Anaconda/conda python installation, because it is still CPython interpreter with debugging symbols provided in the installation. Unless you hijacked it with your custom CPython build :) On Thu, Jun 16, 2016 at 8:13 AM, Pochon-Guérin Ludovic < Ludovic.Pochon-Guerin@statkraft.com> wrote:
Thank you for your help.
It is not possible to attach to the Python process the way explained in PTVS discussion, because it is greyed.
I think it is because I am already running the python process when starting debugger from python file in Visual Studio
I think my problem is due to the Python environment.
I use Miniconda3 and not CPython interpreter in Visual Studio.
It might be something to do with the CLR module too.
Unfortunately I don’t have time to investigate further and will have to work without debugging for the time being.
Thanks anyway
Ludovic
*From:* PythonDotNet [mailto:pythondotnet-bounces+ludovic.pochon-guerin= statkraft.com@python.org] *On Behalf Of *Denis Akhiyarov *Sent:* 14. juni 2016 16:49 *To:* A list for users and developers of Python for .NET *Subject:* Re: [Python.NET] Debugging .NET assembly from Python 3
I regularly debugging C# code called from python side using pythonnet. So something is likely wrong in your settings.
Here is how you set debugger engines (see picture in the comments):
https://github.com/Microsoft/PTVS/issues/674
This mailing list is super-slowly approved for new messages. You may get much faster and better response on PTVS issue tracker:
https://github.com/Microsoft/PTVS/issues/new
Just provide Microsoft Python team with reproducible example. Also mention what symbols you see in Debugger "Modules" window.
If issue is very specific to pythonnet and works on ironpython, then you can use pythonnet issue tracker:
https://github.com/pythonnet/pythonnet/issues/new
Note that PTVS has very specialized code for debugging IronPython, while pythonnet debugging happens through CPython debugger.
On Tue, Jun 14, 2016 at 4:46 AM, Pochon-Guérin Ludovic < Ludovic.Pochon-Guerin@statkraft.com> wrote:
Thank you for your answer,
I tried all of this without success.
What do you mean by “select manually managed debugger”?
Please can you clarify if it is possible to stop at breakpoints in C# code when called from Python code (using python dot net)?
Thanks
Ludovic
*From:* PythonDotNet [mailto:pythondotnet-bounces+ludovic.pochon-guerin= statkraft.com@python.org] *On Behalf Of *Denis Akhiyarov *Sent:* 8. juni 2016 08:32 *To:* A list for users and developers of Python for .NET *Subject:* Re: [Python.NET] Debugging .NET assembly from Python 3
There are many conversations (both codeplex and github) recorded in issue tracker for PTVS about debugging pythonnet code.
The starting point is to ensure that you are on .NET 4+, select manually managed, native, and python debugger engines. Also make sure that managed compatibility mode is not selected. Finally make sure that your python debug symbols are available to PTVS/VS for cross-language debugging.
Note that currently the PTVS remote debugger is not working for pythonnet when debugging python code.
On Tue, Jun 7, 2016 at 3:20 AM, Pochon-Guérin Ludovic < Ludovic.Pochon-Guerin@statkraft.com> wrote:
Hi,
Using Visual Studio 2015, I have a Python project and a C# DLL project.
From the Python code, I import and call functions from the C# class.
When running in Debug, I am able to stop at breakpoints in the Python code, but not in the C# code.
The debugger jumps over the calls as if no symbols were loaded.
I would like to know if it is possible to stop at breakpoints in the C# code and how to setup it in Visual Studio.
This feature works when using IronPython, but we want to use PythonDotNet from Miniconda3.
Thanks
Ludovic
_________________________________________________ Python.NET mailing list - PythonDotNet@python.org https://mail.python.org/mailman/listinfo/pythondotnet
_________________________________________________ Python.NET mailing list - PythonDotNet@python.org https://mail.python.org/mailman/listinfo/pythondotnet
_________________________________________________ Python.NET mailing list - PythonDotNet@python.org https://mail.python.org/mailman/listinfo/pythondotnet
participants (2)
-
Denis Akhiyarov -
Pochon-Guérin Ludovic