paramiko

[Tarun Kapoor]

On Jan 16, 12:22 pm, "Guilherme Polo" <ggp... at gmail.com> wrote:
> 2008/1/16, Tarun Kapoor <tarun.... at gmail.com>:
>
>
>
> > On Jan 16, 11:38 am, "Guilherme Polo" <ggp... at gmail.com> wrote:
> > > 2008/1/16, Tarun Kapoor <tarun.... at gmail.com>:
>
> > > >     # now, connect and use paramiko Transport to negotiate SSH2 across
> > > > the connection
> > > >     sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
> > > >     sock.connect((hostname, port))
>
> > > >     t = paramiko.Transport(sock)
> > > >     t.start_client()
> > > >     key = t.get_remote_server_key()
>
> > > >     event = threading.Event()
> > > >     t.auth_password(username=username, password=password, event=event)
> > > >     event.wait()
>
> > > >     if not t.is_authenticated():
> > > >         print "not authenticated"
>
> > > > output:
> > > > not authenticated
>
> > > This is a different problem I guess, now you are usin get_remote_server_key.
> > > And why are you creating event after calling start_client without
> > > specifying it ?
>
> > > > On Jan 16, 11:11 am, "Guilherme Polo" <ggp... at gmail.com> wrote:
> > > > > 2008/1/16, Tarun Kapoor <tkap... at wscm.net>:
>
> > > > > > I am using paramiko to do an SFTP file transfer... I was able to connect to
> > > > > > the remote server using an SFTP client I have just to make sure that
> > > > > > username and password are working.. This is the code.
>
> > > > > >     # now, connect and use paramiko Transport to negotiate SSH2 across the
> > > > > > connection
>
> > > > > >     sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
>
> > > > > >     sock.connect((hostname, port))
>
> > > > > >     t = paramiko.Transport(sock)
>
> > > > > >     event = threading.Event()
>
> > > > > >     t.start_client(event)
>
> > > > > >     event.wait(15)
>
> > > > > >     if not t.is_active():
>
> > > > > >         print 'SSH negotiation failed.'
>
> > > > > >         sys.exit(1)
>
> > > > > >     else:
>
> > > > > >         print "SSH negotiation sucessful"
>
> > > > > >     event.clear()
>
> > > > > >     t.auth_password(username=username, password=password,event=event)
>
> > > > > >     if not t.is_authenticated():
>
> > > > > >         print "not authenticated"
>
> > > > > > output:
>
> > > > > > SSH negotiation successful
>
> > > > > > not authenticated
>
> > > > > > Tarun
>
> > > > > > Waterstone Capital Management
>
> > > > > > 2 Carlson Parkway, Suite 260
>
> > > > > > Plymouth, MN 55447
>
> > > > > > Direct: 952-697-4123
>
> > > > > > Cell:    612-205-2587
> > > > > >  Disclaimer This e-mail and any attachments is confidential and intended
> > > > > > solely for the use of the individual(s) to whom it is addressed. Any views
> > > > > > or opinions presented are solely those of the author and do not necessarily
> > > > > > represent those of Waterstone Capital Management, L.P and affiliates. If you
> > > > > > are not the intended recipient, be advised that you have received this
> > > > > > e-mail in error and that any use, dissemination, printing, forwarding or
> > > > > > copying of this email is strictly prohibited. Please contact the sender if
> > > > > > you have received this e-mail in error. You should also be aware that
> > > > > > e-mails are susceptible to interference and you should not assume that the
> > > > > > contents of this e-mail originated from the sender above or that they have
> > > > > > been accurately reproduced in their original form. Waterstone Capital
> > > > > > Management, L.P. and affiliates accepts no responsibility for information,
> > > > > > or errors or omissions in this e-mail or use or misuse thereof. If in doubt,
> > > > > > please verify the authenticity with the sender.
> > > > > > --
> > > > > >http://mail.python.org/mailman/listinfo/python-list
>
> > > > > You are missing an event.wait() after t.auth_password.
> > > > > Also, why are you passing this magic value "15" to event.wait() ? That
> > > > > parameter is passed to class _Verbose to indicate if debug messages
> > > > > should be displayed or not, so typical values would be 0/1 or
> > > > > False/True.
>
> > > > > --
> > > > > -- Guilherme H. Polo Goncalves
>
> > > > --
> > > >http://mail.python.org/mailman/listinfo/python-list
>
> > > --
> > > -- Guilherme H. Polo Goncalves
>
> > ok here is the problem... I don't know what is the correct way... The
> > only demos i have from the paramiko library use a hostkeyfile. since i
> > don't have that i thought i would use the get_remote_key to get the
> > key and then connect it using the code in the demo.. But clearly
> > nothing is working...I should not HAVE to use the key since i should
> > be able to authenticate using the password...
>
> > Can you please suggest the right way to go ?
>
> You don't need to use key to authenticate using username and password,
> indeed. And you don't. Your first email was almost correct, you just
> needed to add event.wait() after t.auth_password. It worked here after
> doing that change. You can check out my version:
>
> import sys
> import socket
> import paramiko
> import threading
>
> if len(sys.argv) != 4:
>     print "%s hostname user password" % sys.argv[0]
>     sys.exit(1)
>
> sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
> sock.connect((sys.argv[1], 22))
>
> t = paramiko.Transport(sock)
> event = threading.Event()
> t.start_client(event)
>
> event.wait()
>
> if not t.is_active():
>     print 'SSH negotiation failed.'
>     sys.exit(1)
> else:
>     print "SSH negotiation sucessful"
>
> event.clear()
> t.auth_password(username=sys.argv[2], password=sys.argv[3], event=event)
> event.wait()
> if not t.is_authenticated():
>     print "Authentication failed."
> else:
>     print "Authenticated!"
>
> t.close()
>
>
>
> > Thanks for your time !
> > --
> >http://mail.python.org/mailman/listinfo/python-list
>
> --
> -- Guilherme H. Polo Goncalves

ok i tried the exact same code and here is the output
SSH negotiation sucessful
Authentication failed.


I am positive that the username and paddword are correct. !