Hello,
I have attempted to install SfePy and was able to use Git Bash in Windows 7 Pro 32-bit and followed the instructions listed under " Steps to get a working *SfePy* on Windows using Python(x,y) <http://sfepy.org/doc-devel/installation.html#table-of-contents>"
Everything seemed nominal but upon running run_tests.py the program replied with "79 test file(s) executed in 31.40 s, 63 failure(s) of 116 test(s)". For one of the tests, test_volume.py, I received the output, "test instance creation failed".
I attempted to run test_volume.py in debug mode as suggested on the webpage above, but I receive a number of "Import by filename is not supported" prompts.
I am not sure if I have explained what I am experiencing enough, but on the basis of what i have provided, is there a way to solve this issue? Additionally, is more information necessary to assist me in troubleshooting this problem?
Thank you!
Hello,
see [1] - we have probably a fix, thanks to Ouyang.
r. [1] https://groups.google.com/forum/#!topic/sfepy-devel/GKcexGbS5ZY
On 07/24/2014 05:35 AM, myoungeleg wrote:
Hello,
I have attempted to install SfePy and was able to use Git Bash in Windows 7 Pro 32-bit and followed the instructions listed under " Steps to get a working *SfePy* on Windows using Python(x,y) <http://sfepy.org/doc-devel/installation.html#table-of-contents>"
Everything seemed nominal but upon running run_tests.py the program replied with "79 test file(s) executed in 31.40 s, 63 failure(s) of 116 test(s)". For one of the tests, test_volume.py, I received the output, "test instance creation failed".
I attempted to run test_volume.py in debug mode as suggested on the webpage above, but I receive a number of "Import by filename is not supported" prompts.
I am not sure if I have explained what I am experiencing enough, but on the basis of what i have provided, is there a way to solve this issue? Additionally, is more information necessary to assist me in troubleshooting this problem?
Thank you!
Thank you for your reply. I edited the base.py file to reflect what Ouyang had posted. This definitely worked and now when I run, run_tests.py every tests seems to function normally with an OK output.
However, upon the run_tests.py routine encountering tests\test_input_stokes_slip_bc.py, python.exe stops working and causes the run_tests.py to stall and then eventually stop running after accepting the python.exe prompt.
I re-ran run_tests.py while monitoring my CPU usage and physical memory usage. At the time of the python.exe failure the CPU usage was about 65% and the physical memory had about 1300 MB free. I noticed while the various test routines were running that python.exe never used more than about 550 MB of memory.
I imagine that python.exe throwing an error likely has more to do with my system than the test_input_stokes_slip_bc.py file.
I have a 64 bit system I can try all of this on later, that has more resources.
Any suggestions on where to start troubleshooting?
Thanks,
Matt
On Friday, July 25, 2014 2:02:38 AM UTC-5, Robert Cimrman wrote:
Hello,
see [1] - we have probably a fix, thanks to Ouyang.
r. [1] https://groups.google.com/forum/#!topic/sfepy-devel/GKcexGbS5ZY
Hello,
I have attempted to install SfePy and was able to use Git Bash in Windows 7 Pro 32-bit and followed the instructions listed under " Steps to get a working *SfePy* on Windows using Python(x,y) <http://sfepy.org/doc-devel/installation.html#table-of-contents>"
Everything seemed nominal but upon running run_tests.py the program replied with "79 test file(s) executed in 31.40 s, 63 failure(s) of 116 test(s)". For one of the tests, test_volume.py, I received the output, "test instance creation failed".
I attempted to run test_volume.py in debug mode as suggested on the webpage above, but I receive a number of "Import by filename is not supported" prompts.
I am not sure if I have explained what I am experiencing enough, but on
On 07/24/2014 05:35 AM, myoungeleg wrote: the
basis of what i have provided, is there a way to solve this issue? Additionally, is more information necessary to assist me in troubleshooting this problem?
Thank you!
On 07/26/2014 04:32 PM, myoungeleg wrote:
Thank you for your reply. I edited the base.py file to reflect what Ouyang had posted. This definitely worked and now when I run, run_tests.py every tests seems to function normally with an OK output.
OK
However, upon the run_tests.py routine encountering tests\test_input_stokes_slip_bc.py, python.exe stops working and causes the run_tests.py to stall and then eventually stop running after accepting the python.exe prompt.
Do you have scipy 0.14.0 or newer? We have discovered that its sparse matrix code segfaults on this example (called by _get_edge_path() when requesting a submatrix of a CSR matrix). Either the matrix sfepy provides is wrong (I doubt that - it worked ok for a long time), or there is a bug in scipy sparse package.
We will debug more :)
r.
I re-ran run_tests.py while monitoring my CPU usage and physical memory usage. At the time of the python.exe failure the CPU usage was about 65% and the physical memory had about 1300 MB free. I noticed while the various test routines were running that python.exe never used more than about 550 MB of memory.
I imagine that python.exe throwing an error likely has more to do with my system than the test_input_stokes_slip_bc.py file.
I have a 64 bit system I can try all of this on later, that has more resources.
Any suggestions on where to start troubleshooting?
Thanks,
Matt
On Friday, July 25, 2014 2:02:38 AM UTC-5, Robert Cimrman wrote:
Hello,
see [1] - we have probably a fix, thanks to Ouyang.
r. [1] https://groups.google.com/forum/#!topic/sfepy-devel/GKcexGbS5ZY
Hello,
I have attempted to install SfePy and was able to use Git Bash in Windows 7 Pro 32-bit and followed the instructions listed under " Steps to get a working *SfePy* on Windows using Python(x,y) <http://sfepy.org/doc-devel/installation.html#table-of-contents>"
Everything seemed nominal but upon running run_tests.py the program replied with "79 test file(s) executed in 31.40 s, 63 failure(s) of 116 test(s)". For one of the tests, test_volume.py, I received the output, "test instance creation failed".
I attempted to run test_volume.py in debug mode as suggested on the webpage above, but I receive a number of "Import by filename is not supported" prompts.
I am not sure if I have explained what I am experiencing enough, but on
On 07/24/2014 05:35 AM, myoungeleg wrote: the
basis of what i have provided, is there a way to solve this issue? Additionally, is more information necessary to assist me in troubleshooting this problem?
Thank you!
I believe I have scipy 0.14.0-7 as I downloaded Pyton(x,y) 2.7.6.1 to acquire the necessary .py files in order to run SfePy!
Thanks for all of your assistance! It is exciting to be involved with a python community. I don't recall having this kind of support available when working in C.
:D
On Saturday, July 26, 2014 3:00:00 PM UTC-5, Robert Cimrman wrote:
On 07/26/2014 04:32 PM, myoungeleg wrote:
Thank you for your reply. I edited the base.py file to reflect what Ouyang had posted. This definitely worked and now when I run, run_tests.py every tests seems to function normally with an OK output.
OK
However, upon the run_tests.py routine encountering tests\test_input_stokes_slip_bc.py, python.exe stops working and causes the run_tests.py to stall and then eventually stop running after accepting the python.exe prompt.
Do you have scipy 0.14.0 or newer? We have discovered that its sparse matrix code segfaults on this example (called by _get_edge_path() when requesting a submatrix of a CSR matrix). Either the matrix sfepy provides is wrong (I doubt that - it worked ok for a long time), or there is a bug in scipy sparse package.
We will debug more :)
r.
I re-ran run_tests.py while monitoring my CPU usage and physical memory usage. At the time of the python.exe failure the CPU usage was about 65% and the physical memory had about 1300 MB free. I noticed while the various test routines were running that python.exe never used more than about 550 MB of memory.
I imagine that python.exe throwing an error likely has more to do with my system than the test_input_stokes_slip_bc.py file.
I have a 64 bit system I can try all of this on later, that has more resources.
Any suggestions on where to start troubleshooting?
Thanks,
Matt
On Friday, July 25, 2014 2:02:38 AM UTC-5, Robert Cimrman wrote:
Hello,
see [1] - we have probably a fix, thanks to Ouyang.
r. [1] https://groups.google.com/forum/#!topic/sfepy-devel/GKcexGbS5ZY
On 07/24/2014 05:35 AM, myoungeleg wrote:
Hello,
I have attempted to install SfePy and was able to use Git Bash in Windows 7 Pro 32-bit and followed the instructions listed under " Steps to get a working *SfePy* on Windows using Python(x,y) <http://sfepy.org/doc-devel/installation.html#table-of-contents>"
Everything seemed nominal but upon running run_tests.py the program replied with "79 test file(s) executed in 31.40 s, 63 failure(s) of 116 test(s)". For one of the tests, test_volume.py, I received the output, "test instance creation failed".
I attempted to run test_volume.py in debug mode as suggested on the webpage above, but I receive a number of "Import by filename is not supported" prompts.
I am not sure if I have explained what I am experiencing enough, but
on
the
basis of what i have provided, is there a way to solve this issue? Additionally, is more information necessary to assist me in troubleshooting this problem?
Thank you!
Hi again! After looking up "segfault" and "CSR matix", I decided the most straightforward thing for me to do was to go grab an earlier version of SciPy and install it on my computer. I did not do any "cleaning" before installing. I downloaded SciPy 0.13.3 and installed it.
run_tests.py checks out just fine now, so I imagine your idea concerning the buggy sparse matrix in newer versions of SciPy is correct.
I hope this helps!
Matt
On Saturday, July 26, 2014 3:05:24 PM UTC-5, myoungeleg wrote:
I believe I have scipy 0.14.0-7 as I downloaded Pyton(x,y) 2.7.6.1 to acquire the necessary .py files in order to run SfePy!
Thanks for all of your assistance! It is exciting to be involved with a python community. I don't recall having this kind of support available when working in C.
:D
On Saturday, July 26, 2014 3:00:00 PM UTC-5, Robert Cimrman wrote:
On 07/26/2014 04:32 PM, myoungeleg wrote:
Thank you for your reply. I edited the base.py file to reflect what Ouyang had posted. This definitely worked and now when I run, run_tests.py every tests seems to function normally with an OK output.
OK
However, upon the run_tests.py routine encountering tests\test_input_stokes_slip_bc.py, python.exe stops working and causes the run_tests.py to stall and then eventually stop running after accepting the python.exe prompt.
Do you have scipy 0.14.0 or newer? We have discovered that its sparse matrix code segfaults on this example (called by _get_edge_path() when requesting a submatrix of a CSR matrix). Either the matrix sfepy provides is wrong (I doubt that - it worked ok for a long time), or there is a bug in scipy sparse package.
We will debug more :)
r.
I re-ran run_tests.py while monitoring my CPU usage and physical memory usage. At the time of the python.exe failure the CPU usage was about 65% and the physical memory had about 1300 MB free. I noticed while the various test routines were running that python.exe never used more than about 550 MB of memory.
I imagine that python.exe throwing an error likely has more to do with my system than the test_input_stokes_slip_bc.py file.
I have a 64 bit system I can try all of this on later, that has more resources.
Any suggestions on where to start troubleshooting?
Thanks,
Matt
On Friday, July 25, 2014 2:02:38 AM UTC-5, Robert Cimrman wrote:
Hello,
see [1] - we have probably a fix, thanks to Ouyang.
r. [1] https://groups.google.com/forum/#!topic/sfepy-devel/GKcexGbS5ZY
On 07/24/2014 05:35 AM, myoungeleg wrote:
Hello,
I have attempted to install SfePy and was able to use Git Bash in Windows 7 Pro 32-bit and followed the instructions listed under " Steps to get a working *SfePy* on Windows using Python(x,y) <http://sfepy.org/doc-devel/installation.html#table-of-contents>"
Everything seemed nominal but upon running run_tests.py the program replied with "79 test file(s) executed in 31.40 s, 63 failure(s) of 116 test(s)". For one of the tests, test_volume.py, I received the output, "test instance creation failed".
I attempted to run test_volume.py in debug mode as suggested on the webpage above, but I receive a number of "Import by filename is not
supported"
prompts.
I am not sure if I have explained what I am experiencing enough, but on the basis of what i have provided, is there a way to solve this issue? Additionally, is more information necessary to assist me in troubleshooting this problem?
Thank you!
79 test file(s) executed in 277.52 s, 0 failure(s) of 130 test(s) :) Yay!
On Saturday, July 26, 2014 3:40:30 PM UTC-5, myoungeleg wrote:
Hi again! After looking up "segfault" and "CSR matix", I decided the most straightforward thing for me to do was to go grab an earlier version of SciPy and install it on my computer. I did not do any "cleaning" before installing. I downloaded SciPy 0.13.3 and installed it.
run_tests.py checks out just fine now, so I imagine your idea concerning the buggy sparse matrix in newer versions of SciPy is correct.
I hope this helps!
Matt
On Saturday, July 26, 2014 3:05:24 PM UTC-5, myoungeleg wrote:
I believe I have scipy 0.14.0-7 as I downloaded Pyton(x,y) 2.7.6.1 to acquire the necessary .py files in order to run SfePy!
Thanks for all of your assistance! It is exciting to be involved with a python community. I don't recall having this kind of support available when working in C.
:D
On Saturday, July 26, 2014 3:00:00 PM UTC-5, Robert Cimrman wrote:
On 07/26/2014 04:32 PM, myoungeleg wrote:
Thank you for your reply. I edited the base.py file to reflect what Ouyang had posted. This definitely worked and now when I run, run_tests.py every tests seems to function normally with an OK output.
OK
However, upon the run_tests.py routine encountering tests\test_input_stokes_slip_bc.py, python.exe stops working and causes the run_tests.py to stall and then eventually stop running after accepting the python.exe prompt.
Do you have scipy 0.14.0 or newer? We have discovered that its sparse matrix code segfaults on this example (called by _get_edge_path() when requesting a submatrix of a CSR matrix). Either the matrix sfepy provides is wrong (I doubt that - it worked ok for a long time), or there is a bug in scipy sparse package.
We will debug more :)
r.
I re-ran run_tests.py while monitoring my CPU usage and physical memory usage. At the time of the python.exe failure the CPU usage was about 65% and the physical memory had about 1300 MB free. I noticed while the various test routines were running that python.exe never used more than about 550 MB of memory.
I imagine that python.exe throwing an error likely has more to do with my system than the test_input_stokes_slip_bc.py file.
I have a 64 bit system I can try all of this on later, that has more resources.
Any suggestions on where to start troubleshooting?
Thanks,
Matt
On Friday, July 25, 2014 2:02:38 AM UTC-5, Robert Cimrman wrote:
Hello,
see [1] - we have probably a fix, thanks to Ouyang.
r. [1] https://groups.google.com/forum/#!topic/sfepy-devel/GKcexGbS5ZY
On 07/24/2014 05:35 AM, myoungeleg wrote:
Hello,
I have attempted to install SfePy and was able to use Git Bash in Windows 7 Pro 32-bit and followed the instructions listed under " Steps to get a working *SfePy* on Windows using Python(x,y) <http://sfepy.org/doc-devel/installation.html#table-of-contents>"
Everything seemed nominal but upon running run_tests.py the program replied with "79 test file(s) executed in 31.40 s, 63 failure(s) of 116 test(s)". For one of the tests, test_volume.py, I received the output,
"test
instance creation failed".
I attempted to run test_volume.py in debug mode as suggested on the webpage above, but I receive a number of "Import by filename is not supported" prompts.
I am not sure if I have explained what I am experiencing enough, but on the basis of what i have provided, is there a way to solve this issue? Additionally, is more information necessary to assist me in troubleshooting this problem?
Thank you!
Good, thanks for trying another scipy version!
r.
On 07/26/2014 10:41 PM, myoungeleg wrote:
79 test file(s) executed in 277.52 s, 0 failure(s) of 130 test(s) :) Yay!
On Saturday, July 26, 2014 3:40:30 PM UTC-5, myoungeleg wrote:
Hi again! After looking up "segfault" and "CSR matix", I decided the most straightforward thing for me to do was to go grab an earlier version of SciPy and install it on my computer. I did not do any "cleaning" before installing. I downloaded SciPy 0.13.3 and installed it.
run_tests.py checks out just fine now, so I imagine your idea concerning the buggy sparse matrix in newer versions of SciPy is correct.
I hope this helps!
Matt
On Saturday, July 26, 2014 3:05:24 PM UTC-5, myoungeleg wrote:
I believe I have scipy 0.14.0-7 as I downloaded Pyton(x,y) 2.7.6.1 to acquire the necessary .py files in order to run SfePy!
Thanks for all of your assistance! It is exciting to be involved with a python community. I don't recall having this kind of support available when working in C.
:D
On Saturday, July 26, 2014 3:00:00 PM UTC-5, Robert Cimrman wrote:
On 07/26/2014 04:32 PM, myoungeleg wrote:
Thank you for your reply. I edited the base.py file to reflect what Ouyang had posted. This definitely worked and now when I run, run_tests.py every tests seems to function normally with an OK output.
OK
However, upon the run_tests.py routine encountering tests\test_input_stokes_slip_bc.py, python.exe stops working and causes the run_tests.py to stall and then eventually stop running after accepting the python.exe prompt.
Do you have scipy 0.14.0 or newer? We have discovered that its sparse matrix code segfaults on this example (called by _get_edge_path() when requesting a submatrix of a CSR matrix). Either the matrix sfepy provides is wrong (I doubt that - it worked ok for a long time), or there is a bug in scipy sparse package.
We will debug more :)
r.
I re-ran run_tests.py while monitoring my CPU usage and physical memory usage. At the time of the python.exe failure the CPU usage was about 65% and the physical memory had about 1300 MB free. I noticed while the various test routines were running that python.exe never used more than about 550 MB of memory.
I imagine that python.exe throwing an error likely has more to do with my system than the test_input_stokes_slip_bc.py file.
I have a 64 bit system I can try all of this on later, that has more resources.
Any suggestions on where to start troubleshooting?
Thanks,
Matt
On Friday, July 25, 2014 2:02:38 AM UTC-5, Robert Cimrman wrote:
Hello,
see [1] - we have probably a fix, thanks to Ouyang.
r. [1] https://groups.google.com/forum/#!topic/sfepy-devel/GKcexGbS5ZY
On 07/24/2014 05:35 AM, myoungeleg wrote: > Hello, > > I have attempted to install SfePy and was able to use Git Bash in Windows 7 > Pro 32-bit and followed the instructions listed under " > Steps to get a working *SfePy* on Windows using Python(x,y) > <http://sfepy.org/doc-devel/installation.html#table-of-contents>" > > Everything seemed nominal but upon running run_tests.py the program replied > with "79 test file(s) executed in 31.40 s, 63 failure(s) of 116 test(s)". > For one of the tests, test_volume.py, I received the output,
"test
> instance creation failed". > > I attempted to run test_volume.py in debug mode as suggested on the webpage > above, but I receive a number of "Import by filename is not supported" > prompts. > > I am not sure if I have explained what I am experiencing enough, but on the > basis of what i have provided, is there a way to solve this issue? > Additionally, is more information necessary to assist me in > troubleshooting this problem? > > Thank you!
I commented out all of the lines of the test__input_stokes_slip_bc.py file, except for pass. If commenting out all of the lines besides pass seemed like a questionable idea, please forgive me as I am quite new to python. I do have experience in C and C++ programming a front end for a pretty sophisticated suite of software tools dealing with signal analysis and processing. This prior programming experience was from years ago. I am trying to get back into programming, this time for simulations of physical systems. Please be patient with my postings! Thank you!
Upon running run_tests.py with lines in test_input_stokes_slip_bc.py commented out, all of the other tests passed, except for (you guessed it), test_input_stokes_slip_bc.py. I took away all of the comments and re executed run_tests.py, with the result that when run_tests.py makes it to test_input_stokes_slip_bc.py, python.exe stops working (windows prompt stating that python.exe has stopped working, check windows for solutions, blah blah blah).
I feel the above should isolate the problem to stokes_slip_bc.py. I am looking into it now, but my beginner understanding of python may limit my ability to solve this.
Thanks!
On Saturday, July 26, 2014 9:32:01 AM UTC-5, myoungeleg wrote:
Thank you for your reply. I edited the base.py file to reflect what Ouyang had posted. This definitely worked and now when I run, run_tests.py every tests seems to function normally with an OK output.
However, upon the run_tests.py routine encountering tests\test_input_stokes_slip_bc.py, python.exe stops working and causes the run_tests.py to stall and then eventually stop running after accepting the python.exe prompt.
I re-ran run_tests.py while monitoring my CPU usage and physical memory usage. At the time of the python.exe failure the CPU usage was about 65% and the physical memory had about 1300 MB free. I noticed while the various test routines were running that python.exe never used more than about 550 MB of memory.
I imagine that python.exe throwing an error likely has more to do with my system than the test_input_stokes_slip_bc.py file.
I have a 64 bit system I can try all of this on later, that has more resources.
Any suggestions on where to start troubleshooting?
Thanks,
Matt
On Friday, July 25, 2014 2:02:38 AM UTC-5, Robert Cimrman wrote:
Hello,
see [1] - we have probably a fix, thanks to Ouyang.
r. [1] https://groups.google.com/forum/#!topic/sfepy-devel/GKcexGbS5ZY
Hello,
I have attempted to install SfePy and was able to use Git Bash in Windows 7 Pro 32-bit and followed the instructions listed under " Steps to get a working *SfePy* on Windows using Python(x,y) <http://sfepy.org/doc-devel/installation.html#table-of-contents>"
Everything seemed nominal but upon running run_tests.py the program replied with "79 test file(s) executed in 31.40 s, 63 failure(s) of 116 test(s)". For one of the tests, test_volume.py, I received the output, "test instance creation failed".
I attempted to run test_volume.py in debug mode as suggested on the webpage above, but I receive a number of "Import by filename is not supported" prompts.
I am not sure if I have explained what I am experiencing enough, but on
On 07/24/2014 05:35 AM, myoungeleg wrote: the
basis of what i have provided, is there a way to solve this issue? Additionally, is more information necessary to assist me in troubleshooting this problem?
Thank you!
participants (2)
-
myoungeleg -
Robert Cimrman