Mailman 3 July 2012 - docs

[issue15339] document the threading "facts of life" in Python
by Chris Jerdonek Oct. 26, 2020

Oct. 26, 2020

New submission from Chris Jerdonek <chris.jerdonek(a)gmail.com>: I think it would be helpful if the Python documentation included certain high-level information about multi-threading in Python. At minimum, I think it would help for the documentation to provide a definition that can be linked to of what it means when some part of the Python documentation says something is "thread-safe". In particular, such a definition could clarify that this is different from being atomic. This might best be addressed by an entry in the glossary for the term "thread-safe". Other documentation possibilities include stating what guarantees one should or should not expect regarding thread-safety, both within and across implementations, and providing centralized guidance on how to approach multi-threaded programming in Python. A HOWTO is one possibility for addressing these other possibilities. This issue stems from the discussion in issue 15329, which is more specific. ---------- assignee: docs@python components: Documentation messages: 165336 nosy: cjerdonek, docs@python priority: normal severity: normal status: open title: document the threading "facts of life" in Python _______________________________________ Python tracker <report(a)bugs.python.org> <http://bugs.python.org/issue15339> _______________________________________

8 8

[issue12832] The documentation for the print function should explain/point to how to control the sys.stdout encoding
by R. David Murray Oct. 25, 2020

Oct. 25, 2020

New submission from R. David Murray <rdmurray(a)bitdance.com>: A common problem encountered when using python3 is writing non-ascii to stdout. This will work fine if stdout is a terminal and the terminal encoding handles the characters, but will fail if stdout is later redirected to a pipe. The docs for sys.stdout and for print should contain or point to an explanation of why, and how to solve the problem (ie: how to set the encoding for sys.stdout/sys.stderr). Note that IMO it makes more sense for sys.stdout to default to the LOCALE encoding, but that should be a separate issue. ---------- assignee: docs@python components: Documentation messages: 142880 nosy: docs@python, r.david.murray priority: normal severity: normal status: open title: The documentation for the print function should explain/point to how to control the sys.stdout encoding versions: Python 2.7, Python 3.2, Python 3.3 _______________________________________ Python tracker <report(a)bugs.python.org> <http://bugs.python.org/issue12832> _______________________________________

4 7

[issue12174] Multiprocessing logging levels unclear
by JJeffries Oct. 22, 2020

Oct. 22, 2020

New submission from JJeffries <jamesjeffries1(a)gmail.com>: It is unclear without reference to the logging module where the multiprocessing logging levels fit in the normal logging provided by the logging module, even though it says above the table "The table below illustrates where theses fit in the normal level hierarchy. +----------------+----------------+ | Level | Numeric value | +================+================+ | ``SUBWARNING`` | 25 | +----------------+----------------+ | ``SUBDEBUG`` | 5 | +----------------+----------------+" I propose adding further values from the logging module for clarification. ---------- assignee: docs@python components: Documentation messages: 136839 nosy: JJeffries, docs@python priority: normal severity: normal status: open title: Multiprocessing logging levels unclear versions: Python 3.3 _______________________________________ Python tracker <report(a)bugs.python.org> <http://bugs.python.org/issue12174> _______________________________________

8 15

[issue13047] imp.find_module("") and imp.find_module(".")
by Arfrever Frehtes Taifersar Arahesis Oct. 22, 2020

Oct. 22, 2020

New submission from Arfrever Frehtes Taifersar Arahesis <Arfrever.FTA(a)GMail.Com>: It's undocumented that imp.find_module("") and imp.find_module(".") try to find __init__.py. There is also a small difference in behavior between them. sys.path by default contains "" as the first element, which is sufficient for imp.find_module("."), but not for imp.find_module(""): $ mkdir /tmp/imp_tests $ cd /tmp/imp_tests $ touch __init__.py $ python3.3 -c 'import imp, sys; print(repr(sys.path[0])); print(imp.find_module("."))' '' (None, '.', ('', '', 5)) $ python3.3 -c 'import imp, sys; print(repr(sys.path[0])); print(imp.find_module(""))' '' Traceback (most recent call last): File "<string>", line 1, in <module> ImportError: No module named '' If sys.path contains path (e.g. "." or absolute path) to directory with __init__.py file, then imp.find_module("") will succeed: $ PYTHONPATH="." python3.3 -c 'import imp, sys; print(repr(sys.path[0:2])); print(imp.find_module("."))' ['', '/tmp/imp_tests'] (None, '.', ('', '', 5)) $ PYTHONPATH="." python3.3 -c 'import imp, sys; print(repr(sys.path[0:2])); print(imp.find_module(""))' ['', '/tmp/imp_tests'] (None, '/tmp/imp_tests/', ('', '', 5)) $ python3.3 -c 'import imp, sys; sys.path.insert(1, "."); print(repr(sys.path[0:2])); print(imp.find_module("."))' ['', '.'] (None, '.', ('', '', 5)) $ python3.3 -c 'import imp, sys; sys.path.insert(1, "."); print(repr(sys.path[0:2])); print(imp.find_module(""))' ['', '.'] (None, './', ('', '', 5)) I think that imp.find_module(".") and imp.find_module("") should have the same behavior, and this behavior should be documented. ---------- assignee: docs@python components: Documentation, Interpreter Core messages: 144531 nosy: Arfrever, docs@python priority: normal severity: normal status: open title: imp.find_module("") and imp.find_module(".") versions: Python 2.7, Python 3.2, Python 3.3 _______________________________________ Python tracker <report(a)bugs.python.org> <http://bugs.python.org/issue13047> _______________________________________

5 5

[issue14979] pdb: Link to source
by anatoly techtonik Oct. 22, 2020

Oct. 22, 2020

New submission from anatoly techtonik <techtonik(a)gmail.com>: http://docs.python.org/library/pdb.html#pdb.Pdb Documentation for pdb says: "The debugger is extensible — it is actually defined as the class Pdb. This is currently undocumented but easily understood by reading the source." There should a link to the source. ---------- assignee: docs@python components: Documentation, Library (Lib) messages: 162074 nosy: docs@python, techtonik priority: normal severity: normal status: open title: pdb: Link to source _______________________________________ Python tracker <report(a)bugs.python.org> <http://bugs.python.org/issue14979> _______________________________________

4 5

[issue13828] Further improve casefold documentation
by Jim Jewett Aug. 24, 2020

Aug. 24, 2020

New submission from Jim Jewett <jimjjewett(a)gmail.com>: > http://hg.python.org/cpython/rev/0b5ce36a7a24 > changeset: 74515:0b5ce36a7a24 > + Casefolding is similar to lowercasing but more aggressive because it is > + intended to remove all case distinctions in a string. For example, the German > + lowercase letter ``'ß'`` is equivalent to ``"ss"``. Since it is already > + lowercase, :meth:`lower` would do nothing to ``'ß'``; :meth:`casefold` > + converts it to ``"ss"``. Perhaps add the recommendation to canonicalize as well. A complete, but possibly too long, try is below: Casefolding is similar to lowercasing but more aggressive because it is intended to remove all case distinctions in a string. For example, the German lowercase letter ``'ß'`` is equivalent to ``"ss"``. Since it is already lowercase, :meth:`lower` would do nothing to ``'ß'``; :meth:`casefold` converts it to ``"ss"``. Note that most case-insensitive matches should also match compatibility equivalent characters. The casefolding algorithm is described in section 3.13 of the Unicode Standard. Per D146, a compatibility caseless match can be achieved by from unicodedata import normalize def caseless_compat(string): nfd_string = normalize("NFD", string) nfkd1_string = normalize("NFKD", nfd_string.casefold()) return normalize("NFKD", nfkd1_string.casefold()) ---------- assignee: docs@python components: Documentation messages: 151644 nosy: Jim.Jewett, benjamin.peterson, docs@python priority: normal severity: normal status: open title: Further improve casefold documentation versions: Python 3.3 _______________________________________ Python tracker <report(a)bugs.python.org> <http://bugs.python.org/issue13828> _______________________________________

7 10

[issue13649] termios.ICANON is not documented
by anatoly techtonik May 31, 2020

May 31, 2020

New submission from anatoly techtonik <techtonik(a)gmail.com>: http://docs.python.org/library/termios.html is missing documentation for ICANON flag used to put terminal to "raw" mode. It is also worth to place `termios` raw/canonical mode equivalent on `tty` pages, so that people porting C code to Python could understand the hidden magic. ---------- assignee: docs@python components: Documentation, IO, Library (Lib) messages: 150098 nosy: docs@python, techtonik priority: normal severity: normal status: open title: termios.ICANON is not documented versions: Python 2.7 _______________________________________ Python tracker <report(a)bugs.python.org> <http://bugs.python.org/issue13649> _______________________________________

3 3

[issue9196] Improve docs for string interpolation "%s" re Unicode strings
by Craig McQueen May 31, 2020

May 31, 2020

New submission from Craig McQueen <python(a)craig.mcqueen.id.au>: I have just been trying to figure out how string interpolation works for "%s", when Unicode strings are involved. It seems it's a bit complicated, but the Python documentation doesn't really describe it. It just says %s "converts any Python object using str()". Here is what I have found (I think), and it could be worth improving the documentation of this somehow. Example 1: "%s" % test_object >From what I can tell, in this case: 1. test_object.__str__() is called. 2. If test_object.__str__() returns a string object, then that is substituted. 3. If test_object.__str__() returns a Unicode object (for some reason), then test_object.__unicode__() is called, then _that_ is substituted instead. The output string is turned into Unicode. This behaviour is surprising. [Note that the call to test_object.__str__() is not the same as str(test_object), because the former can return a Unicode object without causing an error, while the latter, if it gets a Unicode object, will then try to encode('ascii') to a string, possibly generating a UnicodeEncodeError exception.] Example 2: u"%s" % test_object In this case: 1. test_object.__unicode__() is called, if it exists, and the result is substituted. The output string is Unicode. 2. If test_object.__unicode__() doesn't exist, then test_object.__str__() is called instead, converted to Unicode, and substituted. The output string is Unicode. Example 3: "%s %s" % (u'unicode', test_object) In this case: 1. The first substitution causes the output string to be Unicode. 2. It seems that (1) causes the second substitution to follow the same rules as Example 2. This is a little surprising. ---------- assignee: docs@python components: Documentation messages: 109516 nosy: cmcqueen1975, docs@python priority: normal severity: normal status: open title: Improve docs for string interpolation "%s" re Unicode strings versions: Python 2.7 _______________________________________ Python tracker <report(a)bugs.python.org> <http://bugs.python.org/issue9196> _______________________________________

5 10

[issue11425] Cleanup sample codes in tutorial.
by INADA Naoki May 14, 2020

May 14, 2020

New submission from INADA Naoki <songofacandy(a)gmail.com>: * Insert spaces around operators and after commas. * Split one liner blocks (ex. def foo(x, y): return x + y) to multi-line blocks. * Insert empty line after def block for scripts (not interactive mode). * Use new-style raise (s/ralse KeyboardInterrupt/raise KeyboardInterrupt()/) * Use x ** 3 instead of x * x * x. Attached patch is for Python 2.6. I'll make same changes for Python 3.1 if this patch is accepted. ---------- assignee: docs@python components: Documentation files: cleanup_tutorial_codes.patch keywords: patch messages: 130225 nosy: docs@python, naoki priority: normal severity: normal status: open title: Cleanup sample codes in tutorial. versions: Python 2.6, Python 2.7, Python 3.1, Python 3.2, Python 3.3 Added file: http://bugs.python.org/file21027/cleanup_tutorial_codes.patch _______________________________________ Python tracker <report(a)bugs.python.org> <http://bugs.python.org/issue11425> _______________________________________

5 5

[issue8940] *HTTPServer need a summary page with API inheritance table
by anatoly techtonik April 27, 2020

April 27, 2020

New submission from anatoly techtonik <techtonik(a)gmail.com>: The abundance of methods and hierarchy depth of various servers from "Internet Protocols and Support" section makes it extremely hard to navigate information. You need a strong OOP background to be able to use this doc effectively, as examples are not intuitive otherwise. Usually you need a decent IDE (such as Eclipse) to get a picture of class hierarchy and a table of all available methods with a mark where they were inherited from. Such table (at least Class Hierarchy view screenshot from Eclipse) should be available in reference for descendant classes. ---------- assignee: docs@python components: Documentation messages: 107321 nosy: docs@python, techtonik priority: normal severity: normal status: open title: *HTTPServer need a summary page with API inheritance table versions: Python 2.7, Python 3.1, Python 3.2 _______________________________________ Python tracker <report(a)bugs.python.org> <http://bugs.python.org/issue8940> _______________________________________

6 7