Some bugfixes that are in Python 2.7 disappeared from Python 3.x
because a bunch of Distutils work was reverted. Jason Coombs and I
spent last Sunday figuring out what got rolled back; see
http://bugs.python.org/issue19544 for details, and for links to the 5
bugfixes that were lost.
Two of the five have already been fixed on the 3.4 'default' branch.
Two of the issues have patches against 3.4 that need review. Please review
these patches!
http://bugs.python.org/issue1180http://bugs.python.org/issue6516
3.4beta1 is due in roughly two weeks, so I'd like to get at least one
review of these patches before I apply them.
The fifth issue, <http://bugs.python.org/issue6466>, is a code cleanup
to remove some code duplication. Jason and I were going to leave this
out, because it's mostly a code-tidiness issue and not worth much risk
(no one seems to have run into the discrepancy between 2.7 and 3.4 in
practice). OTOH, the changes *are* a difference; perhaps making 2.7
and 3.4 match is worth the risk. If someone wants to apply that issue
in 3.4 as well, or argue for doing so, please do! Otherwise, I don't
intend to work on #6466.
--amk
I am trying to distribute a package on pypi, but I have not been able to
figure out how to use pypissh to establish a secure connection with the
command-line tools.
I successfully uploaded my package using the traditional username/password
method. It can be found at:
https://pypi.python.org/pypi/Pizza.py/0.1.0
I then installed pypissh (on Linux) using the command
pip install --user pypissh
and verified that Python can load the module. I generated an RSA key pair
and added the public key into my pypi account using the web interface. I
added my private key to my keychain using ssh-add. Now, when I try to run
python setup.py register
I get the following:
running register
running egg_info
writing requirements to Pizza.py.egg-info/requires.txt
writing Pizza.py.egg-info/PKG-INFO
writing top-level names to Pizza.py.egg-info/top_level.txt
writing dependency_links to Pizza.py.egg-info/dependency_links.txt
reading manifest file 'Pizza.py.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
writing manifest file 'Pizza.py.egg-info/SOURCES.txt'
running check
Registering Pizza.py to http://submit@ssh.pypi.python.org/pypi
Permission denied (publickey).
Traceback (most recent call last):
File "setup.py", line 18, in <module>
data_files=[('pizza/test/files', glob("pizza/test/files/*"))]
File "/usr/lib64/python2.7/distutils/core.py", line 152, in setup
dist.run_commands()
File "/usr/lib64/python2.7/distutils/dist.py", line 953, in run_commands
self.run_command(cmd)
File "/usr/lib64/python2.7/distutils/dist.py", line 972, in run_command
cmd_obj.run()
File "/usr/lib64/python2.7/site-packages/setuptools/command/register.py",
line 9, in run
_register.run(self)
File "/usr/lib64/python2.7/distutils/command/register.py", line 57, in run
self.send_metadata()
File "/usr/lib64/python2.7/distutils/command/register.py", line 168, in
send_metadata
auth)
File "/usr/lib64/python2.7/distutils/command/register.py", line 300, in
post_to_server
result = opener.open(req)
File "/home/cfinch/.local/lib64/python2.7/site-packages/pypissh.py", line
66, in open
return OpenerDirector.open(self, req, data=data)
File "/usr/lib64/python2.7/urllib2.py", line 404, in open
response = self._open(req, data)
File "/usr/lib64/python2.7/urllib2.py", line 422, in _open
'_open', req)
File "/usr/lib64/python2.7/urllib2.py", line 382, in _call_chain
result = func(*args)
File "/home/cfinch/.local/lib64/python2.7/site-packages/pypissh.py", line
49, in httpssh_open
return self.do_open(HTTPSSHConnection, req)
File "/usr/lib64/python2.7/urllib2.py", line 1187, in do_open
r = h.getresponse(buffering=True)
File "/usr/lib64/python2.7/httplib.py", line 1045, in getresponse
response.begin()
File "/usr/lib64/python2.7/httplib.py", line 409, in begin
version, status, reason = self._read_status()
File "/usr/lib64/python2.7/httplib.py", line 373, in _read_status
raise BadStatusLine(line)
httplib.BadStatusLine: ''
It seems that my key is being rejected. How do I go about debugging this?
Did I miss a step in the configuration of pypyssh?
Craig
Hi,
I would like get write access on "nose2-cov" package on pypi
:https://pypi.python.org/pypi/nose2-cov/1.0a4
My username is : "harobed"
Why this request : because I've did this pull request
https://bitbucket.org/memedough/nose2-cov/pull-request/2/improve-readme-app…
I've no answer from author since 2013-03-24.
I've send bitbucket direct message, I send directly one email at
memedough(a)gmail.com (2013-08-30), no answer :(
So, I would like get write access to this package on pypi.
My apologies if I post my request in bad mailing list, if so what is the good
place to post this request ?
Best regards,
Stephane
--
Stéphane Klein <contact(a)stephane-klein.info>
blog: http://stephane-klein.info
Twitter: http://twitter.com/klein_stephane
cv: http://cv.stephane-klein.info
I'm trying to convert a setup.py to use setuptools (specifically the
docutils build, FWIW). The existing setup.py has some custom command
stuff to run 2to3 on build.
As I understand it, setuptools should do this automatically by using
use_2to3=True.
So, I've changed the code to just do:
setup(
...
packages=find_packages(),
use_2to3=True,
...
)
However, when I do python setup.py bdist_wheel, I find that
docutils/__init__.py within the wheel still contains (for example)
class ApplicationError(StandardError):
...
So the StandardError -> Exception fixer isn't being run.
Am I doing something wrong here? The setuptools documentation isn't
very clear on what I should do, or what to expect.
Thanks,
Paul
Hi,
I'm used to virtualenvs and I think I understood the general idea of build out. I need to build a pice of software out of several independent Python packages and I think buildout is the tool to use. But I don't get how buildout and virtualenv are related to each other. Asking Google, I found some hints that buildout is supposed to provide the same kind of isolation as virtualenvs - but only in the "old" 1.x version. The "new"(?) 2.0 version will change that. So I'm totally confused and ask for help.
My use case is simple: I have some python modules on our private pypi server and would like to deploy a pice of software composed out of them (including all dependencies).
Any starting guidance would be very appreciated!
cheers,
Achim
Someone on another list indicated that pip installing binary wheels
from PyPi will ONLY work for Windows.
Is that the case? I think it's desperately needed for OS-X as well.
Linux is so diverse that I can't imagine it being useful, but OS-X has
only so many versions, and the python.org OS-X binaries are very clear
in their requirements -- it would be very useful if folks could easily
get binary wheels for OS-X
-Chris
--
Christopher Barker, Ph.D.
Oceanographer
Emergency Response Division
NOAA/NOS/OR&R (206) 526-6959 voice
7600 Sand Point Way NE (206) 526-6329 fax
Seattle, WA 98115 (206) 526-6317 main reception
Chris.Barker(a)noaa.gov
