Mailman 3 December 2011 - NumPy-Discussion

mixed mode arithmetic
by Neal Becker July 11, 2023

July 11, 2023

I've been browsing the numpy source. I'm wondering about mixed-mode arithmetic on arrays. I believe the way numpy handles this is that it never does mixed arithmetic, but instead converts arrays to a common type. Arguably, that might be efficient for a mix of say, double and float. Maybe not. But for a mix of complex and a scalar type (say, CDouble * Double), it's clearly suboptimal in efficiency. So, do I understand this correctly? If so, is that something we should improve?

4 6

Re: [Numpy-discussion] example reading binary Fortran file
by Neil Martinsen-Burrell July 22, 2021

July 22, 2021

David Froger <david.froger.info <at> gmail.com> writes: > Hy,My question is about reading Fortran binary file (oh no this question > again...) I've posted this before, but I finally got it cleaned up for the Cookbook. For this purpose I use a subclass of file that has methods for reading unformatted Fortran data. See http://www.scipy.org/Cookbook/FortranIO/FortranFile. I'd gladly see this in numpy or scipy somewhere, but I'm not sure where it belongs. > program makeArray > implicit none > integer,parameter:: nx=10,ny=20 > real(4),dimension(nx,ny):: ux,uy,p > integer :: i,j > open(11,file='uxuyp.bin',form='unformatted') > do i = 1,nx > do j = 1,ny > ux(i,j) = real(i*j) > uy(i,j) = real(i)/real(j) > p (i,j) = real(i) + real(j) > enddo > enddo > write(11) ux,uy > write(11) p > close(11) > end program makeArray When I run the above program compiled with gfortran on my Intel Mac, I can read it back with:: >>> import numpy as np >>> from fortranfile import FortranFile >>> f=FortranFile('uxuyp.bin', endian='<') >>> uxuy = f.readReals(prec='f') # 'f' for default reals >>> len(uxuy) 400 >>> ux = np.array(uxuy[:200]).reshape((20,10)).T >>> uy = np.array(uxuy[200:]).reshape((20,10)).T >>> p = f.readReals('f').reshape((20,10)).T >>> ux array([[ 1., 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20.], [ 2., 4., 6., 8., 10., 12., 14., 16., 18., 20., 22., 24., 26., 28., 30., 32., 34., 36., 38., 40.], [ 3., 6., 9., 12., 15., 18., 21., 24., 27., 30., 33., 36., 39., 42., 45., 48., 51., 54., 57., 60.], [ 4., 8., 12., 16., 20., 24., 28., 32., 36., 40., 44., 48., 52., 56., 60., 64., 68., 72., 76., 80.], [ 5., 10., 15., 20., 25., 30., 35., 40., 45., 50., 55., 60., 65., 70., 75., 80., 85., 90., 95., 100.], [ 6., 12., 18., 24., 30., 36., 42., 48., 54., 60., 66., 72., 78., 84., 90., 96., 102., 108., 114., 120.], [ 7.,Proxy-Connection: keep-alive Cache-Control: max-age=0 14., 21., 28., 35., 42., 49., 56., 63., 70., 77., 84., 91., 98., 105., 112., 119., 126., 133., 140.], [ 8., 16., 24., 32., 40., 48., 56., 64., 72., 80., 88., 96., 104., 112., 120., 128., 136., 144., 152., 160.], [ 9., 18., 27., 36., 45., 54., 63., 72., 81., 90., 99., 108., 117., 126., 135., 144., 153., 162., 171., 180.], [ 10., 20., 30., 40., 50., 60., 70., 80., 90., 100., 110., 120., 130., 140., 150., 160., 170., 180., 190., 200.]]) >>> uy array([[ 1. , 0.5 , 0.33333334, 0.25 , 0.2 , 0.16666667, 0.14285715, 0.125 , 0.11111111, 0.1 , 0.09090909, 0.08333334, 0.07692308, 0.07142857, 0.06666667, 0.0625 , 0.05882353, 0.05555556, 0.05263158, 0.05 ], [ 2. , 1. , 0.66666669, 0.5 , 0.40000001, 0.33333334, 0.2857143 , 0.25 , 0.22222222, 0.2 , 0.18181819, 0.16666667, 0.15384616, 0.14285715, 0.13333334, 0.125 , 0.11764706, 0.11111111, 0.10526316, 0.1 ], [ 3. , 1.5 , 1. , 0.75 , 0.60000002, 0.5 , 0.42857143, 0.375 , 0.33333334, 0.30000001, 0.27272728, 0.25 , 0.23076923, 0.21428572, 0.2 , 0.1875 , 0.17647059, 0.16666667, 0.15789473, 0.15000001], [ 4. , 2. , 1.33333337, 1. , 0.80000001, 0.66666669, 0.5714286 , 0.5 , 0.44444445, 0.40000001, 0.36363637, 0.33333334, 0.30769232, 0.2857143 , 0.26666668, 0.25 , 0.23529412, 0.22222222, 0.21052632, 0.2 ], [ 5. , 2.5 , 1.66666663, 1.25 , 1. , 0.83333331, 0.71428573, 0.625 , 0.55555558, 0.5 , 0.45454547, 0.41666666, 0.38461539, 0.35714287, 0.33333334, 0.3125 , 0.29411766, 0.27777779, 0.2631579 , 0.25 ], [ 6. , 3. , 2. , 1.5 , 1.20000005, 1. , 0.85714287, 0.75 , 0.66666669, 0.60000002, 0.54545456, 0.5 , 0.46153846, 0.42857143, 0.40000001, 0.375 , 0.35294119, 0.33333334, 0.31578946, 0.30000001], [ 7. , 3.5 , 2.33333325, 1.75 , 1.39999998, 1.16666663, 1. , 0.875 , 0.77777779, 0.69999999, 0.63636363, 0.58333331, 0.53846157, 0.5 , 0.46666667, 0.4375 , 0.41176471, 0.3888889 , 0.36842105, 0.34999999], [ 8. , 4. , 2.66666675, 2. , 1.60000002, 1.33333337, 1.14285719, 1. , 0.8888889 , 0.80000001, 0.72727275, 0.66666669, 0.61538464, 0.5714286 , 0.53333336, 0.5 , 0.47058824, 0.44444445, 0.42105263, 0.40000001], [ 9. , 4.5 , 3. , 2.25 , 1.79999995, 1.5 , 1.28571427, 1.125 , 1. , 0.89999998, 0.81818181, 0.75 , 0.69230771, 0.64285713, 0.60000002, 0.5625 , 0.52941179, 0.5 , 0.47368422, 0.44999999], [ 10. , 5. , 3.33333325, 2.5 , 2. , 1.66666663, 1.42857146, 1.25 , 1.11111116, 1. , 0.90909094, 0.83333331, 0.76923078, 0.71428573, 0.66666669, 0.625 , 0.58823532, 0.55555558, 0.52631581, 0.5 ]]) >>> p array([[ 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21.], [ 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22.], [ 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23.], [ 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24.], [ 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25.], [ 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26.], [ 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27.], [ 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28.], [ 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28., 29.], [ 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28., 29., 30.]]) Note that you have to provide the shape information for ux and uy because fortran writes them together as a stream of 400 numbers. -Neil

10 10

C-API: multidimensional array indexing?
by Johann Bauer March 31, 2016

March 31, 2016

Dear experts, is there a C-API function for numpy which implements Python's multidimensional indexing? Say, I have a 2d-array PyArrayObject * M; and an index int i; how do I extract the i-th row or column M[i,:] respectively M[:,i]? I am looking for a function which gives again a PyArrayObject * and which is a view to M (no copied data; the result should be another PyArrayObject whose data and strides points to the correct memory portion of M). I searched the API documentation, Google and mailing lists for quite a long time but didn't find anything. Can you help me? Thanks, Johann

3 3

SVD errors
by mtrumpis＠berkeley.edu June 4, 2013

June 4, 2013

Hello list.. I've run into two SVD errors over the last few days. Both errors are identical in numpy/scipy. I've submitted a ticket for the 1st problem (numpy ticket #990). Summary is: some builds of the lapack_lite module linking against system LAPACK (not the bundled dlapack_lite.o, etc) give a "LinAlgError: SVD did not converge" exception on my matrix. This error does occur using Mac's Accelerate framework LAPACK, and a coworker's Ubuntu LAPACK version. It does not seem to happen using ATLAS LAPACK (nor using Octave/Matlab on said Ubuntu) Just today I've come across a negative singular value cropping up in an SVD of a different matrix. This error does occur on my ATLAS LAPACK based numpy, as well as on the Ubuntu setup. And once again, it does not happen in Octave/Matlab. I'm using numpy 1.3.0.dev6336 -- don't know what the Ubuntu box is running. Here are some npy files for the two different cases: https://cirl.berkeley.edu/twiki/pub/User/MikeTrumpis/noconverge_operator.npy https://cirl.berkeley.edu/twiki/pub/User/MikeTrumpis/negsval_operator.npy Mike

6 7

example reading binary Fortran file
by David Froger Feb. 13, 2013

Feb. 13, 2013

Hy, My question is about reading Fortran binary file (oh no this question again...) Until now, I was using the unpack module like that : def lread(f,fourBeginning,fourEnd,*tuple): from struct import unpack """Reading a Fortran binary file in litte-endian""" if fourBeginning: f.seek(4,1) for array in tuple: for elt in xrange(array.size): transpose(array).flat[elt] = unpack(array.dtype.char,f.read(array.itemsize))[0] if fourEnd: f.seek(4,1) After googling, I read that fopen and npfille was deprecated, and we should use numpy.fromfile and ndarray.tofile, but despite of the documentaion, the cookbook, the mailling list and google, I don't succed in making a simple example. Considering the simple Fortran code below what is the Python script to read the four arrrays? What about if my pc is little endian and the file big endian? I think it will be a good idea to put the Fortran writting-arrays code and the Python reading-array script in the cookbook and maybe a page to help people comming from Fortran to start with Python ? Best, David Froger program makeArray implicit none integer,parameter:: nx=10,ny=20 real(4),dimension(nx,ny):: ux,uy,p integer :: i,j open(11,file='uxuyp.bin',form='unformatted') do i = 1,nx do j = 1,ny ux(i,j) = real(i*j) uy(i,j) = real(i)/real(j) p (i,j) = real(i) + real(j) enddo enddo write(11) ux,uy write(11) p close(11) end program makeArray

8 22

dtype '|S0' not understood
by David Warde-Farley Oct. 6, 2012

Oct. 6, 2012

Howdy, It seems it's possible using e.g. In [25]: dtype([('foo', str)])Out[25]: dtype([('foo', '|S0')]) to get yourself a zero-length string. However dtype('|S0') results in a TypeError: data type not understood. I understand the stupidity of creating a 0-length string field but it's conceivable that it's accidental. For example, it could lead to a situation where you've created that field, are missing all the data you had meant to put in it, serialize with np.save, and upon np.load aren't able to get _any_ of your data back because the dtype descriptor is considered bogus (can you guess why I thought of this scenario?). It seems that either dtype(str) should do something more sensible than zero-length string, or it should be possible to create it with dtype('| S0'). Which should it be? David

3 3

Long-standing issue with using numpy in embedded CPython
by Yang Zhang Sept. 25, 2012

Sept. 25, 2012

It turns out that there's a long-standing problem in numpy that prevents it from being used in embedded CPython environments: http://stackoverflow.com/questions/7592565/when-embedding-cpython-in-java-w… http://mail.scipy.org/pipermail/numpy-discussion/2009-July/044046.html Is there any fix or workaround for this? Thanks. -- Yang Zhang http://yz.mit.edu/

9 15

dtype comparison, hash
by Andreas Kloeckner March 5, 2012

March 5, 2012

Hi all, Two questions: - Are dtypes supposed to be comparable (i.e. implement '==', '!=')? - Are dtypes supposed to be hashable? PyCUDA and PyOpenCL assume both in a few places, but at least hashability doesn't seem to be true. (If so, __hash__ should be implemented to throw an error. If not, we found a bug in the hash implementation.) Thanks! Andreas

3 6

Moving to gcc 4.* for win32 installers ?
by David Cournapeau Feb. 28, 2012

Feb. 28, 2012

Hi, I was wondering if we could finally move to a more recent version of compilers for official win32 installers. This would of course concern the next release cycle, not the ones where beta/rc are already in progress. Basically, the pros: - we will have to move at some point - gcc 4.* seem less buggy, especially C++ and fortran. - no need to maintain msvcr90 vodoo The cons: - it will most likely break the ABI - we need to recompile atlas (but I can take care of it) - the biggest: it is difficult to combine gfortran with visual studio (more exactly you cannot link gfortran runtime to a visual studio executable). The only solution I could think of would be to recompile the gfortran runtime with Visual Studio, which for some reason does not sound very appealing :) Thoughts ? cheers, David

6 25

Numpy 1.5.1/1.6.1 doesn't build doc with sphinx 1.1.2
by Sandro Tosi Feb. 22, 2012

Feb. 22, 2012

Hello, with the new sphinx, v1.1.2, numpy documentation of 1.5.1 or 1.6.1 doesn't build. The full log of the debian package build is at: http://people.debian.org/~jwilk/tmp/python-numpy_1.6.1-3_i386.build attached is the file left in /tmp by sphinx for the error. Could you please give it a look? Cheers, -- Sandro Tosi (aka morph, morpheus, matrixhasu) My website: http://matrixhasu.altervista.org/ Me at Debian: http://wiki.debian.org/SandroTosi

3 3