Mailman 3 September 2014 - NumPy-Discussion

mixed mode arithmetic
by Neal Becker 11 Jul '23

11 Jul '23

I've been browsing the numpy source. I'm wondering about mixed-mode arithmetic on arrays. I believe the way numpy handles this is that it never does mixed arithmetic, but instead converts arrays to a common type. Arguably, that might be efficient for a mix of say, double and float. Maybe not. But for a mix of complex and a scalar type (say, CDouble * Double), it's clearly suboptimal in efficiency. So, do I understand this correctly? If so, is that something we should improve?

4 6

Invalid value encoutered : how to prevent numpy.where to do this?
by Eric Emsellem 18 Feb '23

18 Feb '23

Dear all, I have a code using lots of "numpy.where" to make some constrained calculations as in: data = arange(10) result = np.where(data == 0, 0., 1./data) # or data1 = arange(10) data2 = arange(10)+1.0 result = np.where(data1 > data2, np.sqrt(data1-data2), np.sqrt(data2-data2)) which then produces warnings like: /usr/bin/ipython:1: RuntimeWarning: invalid value encountered in sqrt or for the first example: /usr/bin/ipython:1: RuntimeWarning: divide by zero encountered in divide How do I avoid these messages to appear? I know that I could in principle use numpy.seterr. However, I do NOT want to remove these warnings for other potential divide/multiply/sqrt etc errors. Only when I am using a "where", to in fact avoid such warnings! Note that the warnings only happen once, but since I am going to release that code, I would like to avoid the user to get such messages which are irrelevant here (because I am testing, with the where, when NOT to divide by zero or take a sqrt of a negative number). thanks! Eric

5 4

Re: [Numpy-discussion] example reading binary Fortran file
by Neil Martinsen-Burrell 22 Jul '21

22 Jul '21

David Froger <david.froger.info <at> gmail.com> writes: > Hy,My question is about reading Fortran binary file (oh no this question > again...) I've posted this before, but I finally got it cleaned up for the Cookbook. For this purpose I use a subclass of file that has methods for reading unformatted Fortran data. See http://www.scipy.org/Cookbook/FortranIO/FortranFile. I'd gladly see this in numpy or scipy somewhere, but I'm not sure where it belongs. > program makeArray > implicit none > integer,parameter:: nx=10,ny=20 > real(4),dimension(nx,ny):: ux,uy,p > integer :: i,j > open(11,file='uxuyp.bin',form='unformatted') > do i = 1,nx > do j = 1,ny > ux(i,j) = real(i*j) > uy(i,j) = real(i)/real(j) > p (i,j) = real(i) + real(j) > enddo > enddo > write(11) ux,uy > write(11) p > close(11) > end program makeArray When I run the above program compiled with gfortran on my Intel Mac, I can read it back with:: >>> import numpy as np >>> from fortranfile import FortranFile >>> f=FortranFile('uxuyp.bin', endian='<') >>> uxuy = f.readReals(prec='f') # 'f' for default reals >>> len(uxuy) 400 >>> ux = np.array(uxuy[:200]).reshape((20,10)).T >>> uy = np.array(uxuy[200:]).reshape((20,10)).T >>> p = f.readReals('f').reshape((20,10)).T >>> ux array([[ 1., 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20.], [ 2., 4., 6., 8., 10., 12., 14., 16., 18., 20., 22., 24., 26., 28., 30., 32., 34., 36., 38., 40.], [ 3., 6., 9., 12., 15., 18., 21., 24., 27., 30., 33., 36., 39., 42., 45., 48., 51., 54., 57., 60.], [ 4., 8., 12., 16., 20., 24., 28., 32., 36., 40., 44., 48., 52., 56., 60., 64., 68., 72., 76., 80.], [ 5., 10., 15., 20., 25., 30., 35., 40., 45., 50., 55., 60., 65., 70., 75., 80., 85., 90., 95., 100.], [ 6., 12., 18., 24., 30., 36., 42., 48., 54., 60., 66., 72., 78., 84., 90., 96., 102., 108., 114., 120.], [ 7.,Proxy-Connection: keep-alive Cache-Control: max-age=0 14., 21., 28., 35., 42., 49., 56., 63., 70., 77., 84., 91., 98., 105., 112., 119., 126., 133., 140.], [ 8., 16., 24., 32., 40., 48., 56., 64., 72., 80., 88., 96., 104., 112., 120., 128., 136., 144., 152., 160.], [ 9., 18., 27., 36., 45., 54., 63., 72., 81., 90., 99., 108., 117., 126., 135., 144., 153., 162., 171., 180.], [ 10., 20., 30., 40., 50., 60., 70., 80., 90., 100., 110., 120., 130., 140., 150., 160., 170., 180., 190., 200.]]) >>> uy array([[ 1. , 0.5 , 0.33333334, 0.25 , 0.2 , 0.16666667, 0.14285715, 0.125 , 0.11111111, 0.1 , 0.09090909, 0.08333334, 0.07692308, 0.07142857, 0.06666667, 0.0625 , 0.05882353, 0.05555556, 0.05263158, 0.05 ], [ 2. , 1. , 0.66666669, 0.5 , 0.40000001, 0.33333334, 0.2857143 , 0.25 , 0.22222222, 0.2 , 0.18181819, 0.16666667, 0.15384616, 0.14285715, 0.13333334, 0.125 , 0.11764706, 0.11111111, 0.10526316, 0.1 ], [ 3. , 1.5 , 1. , 0.75 , 0.60000002, 0.5 , 0.42857143, 0.375 , 0.33333334, 0.30000001, 0.27272728, 0.25 , 0.23076923, 0.21428572, 0.2 , 0.1875 , 0.17647059, 0.16666667, 0.15789473, 0.15000001], [ 4. , 2. , 1.33333337, 1. , 0.80000001, 0.66666669, 0.5714286 , 0.5 , 0.44444445, 0.40000001, 0.36363637, 0.33333334, 0.30769232, 0.2857143 , 0.26666668, 0.25 , 0.23529412, 0.22222222, 0.21052632, 0.2 ], [ 5. , 2.5 , 1.66666663, 1.25 , 1. , 0.83333331, 0.71428573, 0.625 , 0.55555558, 0.5 , 0.45454547, 0.41666666, 0.38461539, 0.35714287, 0.33333334, 0.3125 , 0.29411766, 0.27777779, 0.2631579 , 0.25 ], [ 6. , 3. , 2. , 1.5 , 1.20000005, 1. , 0.85714287, 0.75 , 0.66666669, 0.60000002, 0.54545456, 0.5 , 0.46153846, 0.42857143, 0.40000001, 0.375 , 0.35294119, 0.33333334, 0.31578946, 0.30000001], [ 7. , 3.5 , 2.33333325, 1.75 , 1.39999998, 1.16666663, 1. , 0.875 , 0.77777779, 0.69999999, 0.63636363, 0.58333331, 0.53846157, 0.5 , 0.46666667, 0.4375 , 0.41176471, 0.3888889 , 0.36842105, 0.34999999], [ 8. , 4. , 2.66666675, 2. , 1.60000002, 1.33333337, 1.14285719, 1. , 0.8888889 , 0.80000001, 0.72727275, 0.66666669, 0.61538464, 0.5714286 , 0.53333336, 0.5 , 0.47058824, 0.44444445, 0.42105263, 0.40000001], [ 9. , 4.5 , 3. , 2.25 , 1.79999995, 1.5 , 1.28571427, 1.125 , 1. , 0.89999998, 0.81818181, 0.75 , 0.69230771, 0.64285713, 0.60000002, 0.5625 , 0.52941179, 0.5 , 0.47368422, 0.44999999], [ 10. , 5. , 3.33333325, 2.5 , 2. , 1.66666663, 1.42857146, 1.25 , 1.11111116, 1. , 0.90909094, 0.83333331, 0.76923078, 0.71428573, 0.66666669, 0.625 , 0.58823532, 0.55555558, 0.52631581, 0.5 ]]) >>> p array([[ 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21.], [ 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22.], [ 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23.], [ 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24.], [ 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25.], [ 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26.], [ 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27.], [ 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28.], [ 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28., 29.], [ 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28., 29., 30.]]) Note that you have to provide the shape information for ux and uy because fortran writes them together as a stream of 400 numbers. -Neil

10 10

C-API: multidimensional array indexing?
by Johann Bauer 31 Mar '16

31 Mar '16

Dear experts, is there a C-API function for numpy which implements Python's multidimensional indexing? Say, I have a 2d-array PyArrayObject * M; and an index int i; how do I extract the i-th row or column M[i,:] respectively M[:,i]? I am looking for a function which gives again a PyArrayObject * and which is a view to M (no copied data; the result should be another PyArrayObject whose data and strides points to the correct memory portion of M). I searched the API documentation, Google and mailing lists for quite a long time but didn't find anything. Can you help me? Thanks, Johann

3 3

Generalize hstack/vstack --> stack; Block matrices like in matlab
by Stefan Otte 09 Jan '16

09 Jan '16

Hey, quite often I work with block matrices. Matlab offers the convenient notation [ a b; c d ] to stack matrices. The numpy equivalent is kinda clumsy: vstack([hstack([a,b]), hstack([c,d])]) I wrote the little function `stack` that does exactly that: stack([[a, b], [c, d]]) In my case `stack` replaced `hstack` and `vstack` almost completely. If you're interested in including it in numpy I created a pull request [1]. I'm looking forward to getting some feedback! Best, Stefan [1] https://github.com/numpy/numpy/pull/5057

12 24

PR added: frozen dimensions in gufunc signatures
by Jaime Fernández del Río 23 Jun '15

23 Jun '15

Hi, I have just sent a PR (https://github.com/numpy/numpy/pull/5015), adding the possibility of having frozen dimensions in gufunc signatures. As a proof of concept, I have added a `cross1d` gufunc to `numpy.core.umath_tests`: In [1]: import numpy as np In [2]: from numpy.core.umath_tests import cross1d In [3]: cross1d.signature Out[3]: '(3),(3)->(3)' In [4]: a = np.random.rand(1000, 3) In [5]: b = np.random.rand(1000, 3) In [6]: np.allclose(np.cross(a, b), cross1d(a, b)) Out[6]: True In [7]: %timeit np.cross(a, b) 10000 loops, best of 3: 76.1 us per loop In [8]: %timeit cross1d(a, b) 100000 loops, best of 3: 13.1 us per loop In [9]: c = np.random.rand(1000, 2) In [10]: d = np.random.rand(1000, 2) In [11]: cross1d(c, d) --------------------------------------------------------------------------- ValueError Traceback (most recent call last) <ipython-input-11-72c66212e40c> in <module>() ----> 1 cross1d(c, d) ValueError: cross1d: Operand 0 has a mismatch in its core dimension 0, with gufunc signature (3),(3)->(3) (size 2 is different from 3) The speed up over `np.cross` is nice, and while `np.cross` is not the best of examples, as it needs to handle more sizes, in many cases this will allow producing gufuncs that work without a Python wrapper redoing checks that are best left to the iterator, such as dimension sizes. It still needs tests, but before embarking on fully developing those, I wanted to make sure that there is an interest on this. I would also like to further enhance gufuncs providing computed dimensions, e.g. making it possible to e.g. define `pairwise_cross` with signature '(n, 3)->($m, 3)', where the $ indicates that m is a computed dimension, that would have to be calculated by a function passed to the gufunc constructor and stored in the gufunc object, based on the other core dimensions. In this case it would make $m be n*(n-1), so that all pairwise cross products between 3D vectors could be computed. The syntax with '$' is kind of crappy, so any suggestions on how to better express this in the signature are more than welcome, as well as any feedback on the merits (or lack of them) of implementing this. Jaime -- (\__/) ( O.o) ( > <) Este es Conejo. Copia a Conejo en tu firma y ayúdale en sus planes de dominación mundial.

4 4

Numpy 'None' comparison FutureWarning
by Demitri Muna 31 Jan '15

31 Jan '15

Hi, I just encountered the following in my code: FutureWarning: comparison to `None` will result in an elementwise object comparison in the future. I'm very concerned about this. This is a very common programming pattern (lazy loading): class A(object): def __init__(self): self._some_array = None @property def some_array(self): if self._some_array == None: # perform some expensive setup of array return self._some_array It seems to me that the new behavior will break this pattern. I think that redefining the "==" operator is a little too aggressive here. It strikes me as very nonstandard and not at all obvious to someone reading the code that the comparison is a very special case for numpy objects. Unless there's some aspect I'm missing here, I think an element-wise comparator should be more explicit. Cheers, Demitri _________________________________________ Demitri Muna Department of Astronomy Le Ohio State University http://trillianverse.org http://scicoder.org

5 6

New function `count_unique` to generate contingency tables.
by Warren Weckesser 25 Jan '15

25 Jan '15

I created a pull request (https://github.com/numpy/numpy/pull/4958) that defines the function `count_unique`. `count_unique` generates a contingency table from a collection of sequences. For example, In [7]: x = [1, 1, 1, 1, 2, 2, 2, 2, 2] In [8]: y = [3, 4, 3, 3, 3, 4, 5, 5, 5] In [9]: (xvals, yvals), counts = count_unique(x, y) In [10]: xvals Out[10]: array([1, 2]) In [11]: yvals Out[11]: array([3, 4, 5]) In [12]: counts Out[12]: array([[3, 1, 0], [1, 1, 3]]) It can be interpreted as a multi-argument generalization of `np.unique(x, return_counts=True)`. It overlaps with Pandas' `crosstab`, but I think this is a pretty fundamental counting operation that fits in numpy. Matlab's `crosstab` (http://www.mathworks.com/help/stats/crosstab.html) and R's `table` perform the same calculation (with a few more bells and whistles). For comparison, here's Pandas' `crosstab` (same `x` and `y` as above): In [28]: import pandas as pd In [29]: xs = pd.Series(x) In [30]: ys = pd.Series(y) In [31]: pd.crosstab(xs, ys) Out[31]: col_0 3 4 5 row_0 1 3 1 0 2 1 1 3 And here is R's `table`: > x <- c(1,1,1,1,2,2,2,2,2) > y <- c(3,4,3,3,3,4,5,5,5) > table(x, y) y x 3 4 5 1 3 1 0 2 1 1 3 Is there any interest in adding this (or some variation of it) to numpy? Warren

5 11

taking a 2D uneven surface slice
by Bryan Woods 03 Dec '14

03 Dec '14

I'm trying to do something that at first glance I think should be simple but I can't quite figure out how to do it. The problem is as follows: I have a 3D grid Values[Nx, Ny, Nz] I want to slice Values at a 2D surface in the Z dimension specified by Z_index[Nx, Ny] and return a 2D slice[Nx, Ny]. It is not as simple as Values[:,:,Z_index]. I tried this: >>> values.shape (4, 5, 6) >>> coords.shape (4, 5) >>> slice = values[:,:,coords] >>> slice.shape (4, 5, 4, 5) >>> slice = np.take(values, coords, axis=2) >>> slice.shape (4, 5, 4, 5) >>> Obviously I could create an empty 2D slice and then fill it by using np.ndenumerate to fill it point by point by selecting values[i, j, Z_index[i, j]]. This just seems too inefficient and not very pythonic.

3 3

ANN: Bokeh 0.6.1 release
by Damian Avila 01 Dec '14

01 Dec '14

On behalf of the Bokeh team, I am very happy to announce the release of Bokeh version 0.6.1! Bokeh is a Python library for visualizing large and realtime datasets on the web. Its goal is to provide to developers (and domain experts) with capabilities to easily create novel and powerful visualizations that extract insight from local or remote (possibly large) data sets, and to easily publish those visualization to the web for others to explore and interact with. This point release includes several bug fixes and improvements over our most recent 0.6.0 release: * Toolbar enhancements * bokeh-server fixes * Improved documentation * Button widgets * Google map support in the Python side * Code cleanup in the JS side and examples * New examples See the CHANGELOG for full details. In upcoming releases, you should expect to see more new layout capabilities (colorbar axes, better grid plots and improved annotations), additional tools, even more widgets and more charts, R language bindings, Blaze integration and cloud hosting for Bokeh apps. Don't forget to check out the full documentation, interactive gallery, and tutorial at http://bokeh.pydata.org as well as the Bokeh IPython notebook nbviewer index (including all the tutorials) at: http://nbviewer.ipython.org/github/ContinuumIO/bokeh-notebooks/blob/master/… If you are using Anaconda or miniconda, you can install with conda: conda install bokeh Alternatively, you can install with pip: pip install bokeh BokehJS is also available by CDN for use in standalone javascript applications: http://cdn.pydata.org/bokeh-0.6.1.min.js http://cdn.pydata.org/bokeh-0.6.1.min.css Issues, enhancement requests, and pull requests can be made on the Bokeh Github page: https://github.com/continuumio/bokeh Questions can be directed to the Bokeh mailing list: bokeh(a)continuum.io If you have interest in helping to develop Bokeh, please get involved! Cheers, Damián Avila damian.avila(a)continuum.io

6 7