Mailman 3 February 2000 - Mailman-Developers

Re: [Mailman-Developers] mail/news gateway
by Nigel Metheringham Feb. 24, 2000

Feb. 24, 2000

claw(a)kanga.nu said: > I potentially have the same problem -- the system occassionally gets > very high load spikes, NOT due to MailMan, and Exim is configured to > refuse connections when load gets too high. A solution to this is to add your mailman host (which would typically be 127.0.0.1) into smtp_reserve_hosts and then set the related parameters such as smtp_accept_reserve, smtp_load_reserve and the various *_load* options so that incoming SMTP is always accepted from mailman (although the messages may be queued rather than immediately delivered). The upside of this is that it puts less load on the system than additional invocations of exim from the command line, and all your load policy is pretty much in one place. Whichever method you use there may still be errors caused due to (for example) running out of spool space. [I'll try and work out a reasonable note on this for the mailman/exim howto information - alternatively I would just *love* it if someone would come up with some text for me :-) ] http://www.exim.org/howto/mailman.html Nigel. -- [ - Opinions expressed are personal and may not be shared by VData - ] [ Nigel Metheringham Nigel.Metheringham(a)VData.co.uk ] [ Phone: +44 1423 850000 Fax +44 1423 858866 ]

2 1

nondelivery report to list
by Ricardo Kustner Feb. 22, 2000

Feb. 22, 2000

i just saw a non-delivery report (full mailbox) from a postmaster arrive on the list address... that's kinda odd... probably a really broken MTA? I haven't seen this happen before since i'm using Mailman... the MTA seems to be Microsoft Exchange: >Received: from mailincoming5.collegeclub.com ([10.10.5.85]) by mailoutgoing1.collegeclub.com with SMTP (Microsoft Exchange Internet Mail Service Version 5.5.2650.21) > id DZ3T7A17; Tue, 22 Feb 2000 02:50:44 -0800 >Received: from mail pickup service by mailincoming5.collegeclub.com with Microsoft SMTPSVC; > Tue, 22 Feb 2000 02:54:28 -0800 Ricardo. --

1 0

small bug in bin/arch
by Jeff Berliner Feb. 22, 2000

Feb. 22, 2000

Sorry if this been fixed already in the 1.2 tree, but I can't access CVS from here. I searched the archives and didn't see anything. With a stock MM 1.1 install, line 77 of $prefix/bin/arch has an error. If in that block of code, a MMUnknownListError exception is raised, (for instance, if the config.db permissions are incorrect), arch actually dies with a NameError, and obviously doesn't report the correct problem. The solution is to add 'Errors.' to the name of the exception to catch. I guess this was just an oversight. *** ../src/mailman-1.1/bin/arch Sat Aug 21 14:21:44 1999 --- arch Tue Feb 22 10:13:33 2000 *************** *** 74,80 **** listname, mbox = sys.argv[1:] try: mlist = MailList(listname) ! except MMUnknownListError: usage(2, 'no such list: ' + listname) # lay claim to the archive's lock file. this is so no other post can --- 74,80 ---- listname, mbox = sys.argv[1:] try: mlist = MailList(listname) ! except Errors.MMUnknownListError: usage(2, 'no such list: ' + listname) # lay claim to the archive's lock file. this is so no other post can - Jeff -- Jeff Berliner jeff(a)popmail.med.nyu.edu Academic Computing, Phone: (212) 263-2051 New York University School of Medicine Fax: (212) 263-8542

2 1

Wishlist items...
by Ted Cabeen Feb. 21, 2000

Feb. 21, 2000

Three wishlist items, one of which I've coded (but am not sure will work on CVS) and one I haven't. I'd like to submit these to the bug tracking system, but there doesn't seem to be an email submit address. Does anyone know what it is? First: Add an option in mm_cfg.py and Defaults.py to turn archiving on and off. I like to be able to have archiving off for the majority of my mailing lists unless the owner explicitly wants it. (I coded this one up in 5 minutes, but I'm still on 1.1, so I don't know if it will port. I'll send the diffs if anyone wants them) Second: Currently, the senddigests script sends a digest for every list that has digesting on and has any content to send. However, this means that on a medium traffic list, it's possible to send out a digest of one message, if the digest size was reached two messages ago. What I'd like to see is the digester only send out a time-based digest if no digest had been sent in some finite amount of time instead of every time the cron job is run. Third: Currently the digester never increments its volume number. There is no code in Mailman to increase the volume number. It it set to 1 in the InitVars function, and is never changed. Volume incrementing should probably be an option on the digest page. At the least, we should change the volume number yearly. Thanks. -- Ted Cabeen http://www.pobox.com/~secabeen secabeen(a)pobox.com Check Website or finger for PGP Public Key secabeen(a)midway.uchicago.edu "I have taken all knowledge to be my province." -F. Bacon cococabeen(a)aol.com "Human kind cannot bear very much reality."-T.S.Eliot 73126.626(a)compuserve.com

1 0

Quick patch to fix '%' in sender
by Christopher Lindsey Feb. 21, 2000

Feb. 21, 2000

We were having problems with email addresses containing a '%'. Specifically, if the address were held for some reason the admindb interface would choke when it tried to process it. There's a (very) small patch below against the current CVS tree. Chris ---------------------------------------------------------------------- *** Mailman/ListAdmin.py Mon Feb 21 11:11:55 2000 --- Mailman/ListAdmin.py Mon Feb 21 11:11:55 2000 *************** *** 192,198 **** \tSubject: %(subject)s''' % { 'listname' : self.internal_name(), 'rejection': rejection, ! 'sender' : sender, 'subject' : strquote(subject), } if comment: --- 192,198 ---- \tSubject: %(subject)s''' % { 'listname' : self.internal_name(), 'rejection': rejection, ! 'sender' : strquote(sender), 'subject' : strquote(subject), } if comment:

1 0

New feature, auto-responding
by Barry A. Warsaw Feb. 20, 2000

Feb. 20, 2000

I've been a bad boy. I should have been killing bugs, or catching up on the list traffic, or working on the I18N or other new features. But I had a particularly annoying itch that I wanted see how easy it was to scratch. Turned out pretty easy - it took me about an hour to implement, and another hour or so to test. What I've added is an auto-responder. You can control whether auto-responses are send to mailing list posts and/or -admin emails (it makes no sense to auto-respond to -request emails, since that's already a bot). You can also set the auto-response texts and the grace period. Below is the check-in message for those of you not on mailman-checkins. Okay, now I promise to get to all the things I'm supposed to do. I'd like to be very close to releasing 1.2 by the first weekend in March. Enjoy, -Barry -------------------- snip snip -------------------- Autoresponder: New mixin class which contains attributes and configuration information for the new replybot functionality. Mailman can now send automatic responses to mailing list posts or -admin emails (-request autoreplies aren't necessary since that's a bot anyway). The following new configuration attributes control this feature: autorespond_postings - boolean which controls autoreplies to mailing list posts. autorespond_admin - same as above the -admin address. autoresponse_postings_text - the mailing list post autoreply text. This is %(string)s interpolated with a dictionary as described below. autoresponse_admin_text - same as above for the -admin address. autoresponse_graceperiod - the number of days between automatic responses to the same email author. This variable controls both autoresponses. If this is <= 0, then there is no grace period. The following non-configurable attributes store the state: postings_responses - a dictionary of email addresses (lower cased) to the time.time() that the grace period expires. admin_responses - same as above for the -admin address. autoresponse_postings_text and autoresponse_admin_text are string interpolated with the following dictionary: listname - the mailing list's "real_name" listurl - the list's "listinfo" url requestemail - the list's -request address adminemail - the list's -admin address We should probably add others.

3 2

external archiver
by Bill Bumgarner Feb. 18, 2000

Feb. 18, 2000

I have written an archiver that uses WebDAV to archive messages [with or without decoded attachments] to a WebDAV enabled web server. I'm currently using Apache, but there is no reason why it shouldn't work "out of the box" with Zope (Zope has a WebDAV enabler). Email if you want patches/code... it works *very* well. We will be going into full production with it in the next week [www.bebusy.com]. b.bum

1 0

Adding a new archiver
by Petru Paler Feb. 18, 2000

Feb. 18, 2000

Hello, I want to add a custom archiver to Mailman to make it pump messages into Zope. Is there a standard way to do this or should I just go and hack the source ? Has anyone made Mailman and Zope talk to each other ? -Petru

2 1

Re: [Mailman-Developers] Adding a new archiver
by J C Lawrence Feb. 18, 2000

Feb. 18, 2000

On Thu, 17 Feb 2000 17:03:21 +0200 Petru Paler <ppetru(a)coltronix.com> wrote: > Hello, I want to add a custom archiver to Mailman to make it > pump messages into Zope. Is there a standard way to do this or > should I just go and hack the source ? Has anyone made Mailman and > Zope talk to each other ? Your best bet is probably to write a small external tool that accepts a message from stdin and then creates the appropriate object under Zope that contains the message. You can then just plug that into MailMan as an external archiver. BTW: If you do this, please drop a note to this and the zope mailing lists. I know several people who would be interested. -- J C Lawrence Home: claw(a)kanga.nu ----------(*) Other: coder(a)kanga.nu --=| A man is as sane as he is dangerous to his environment |=--

1 0

internationalization ?
by Thomas Wouters Feb. 17, 2000

Feb. 17, 2000

Barry mentioned something, a couple of weeks back, about spending a weekend trying to integrate i18n patches to mailman, to internationalize it. I assume those patches do some heavy-duty rewriting of various bits of the template code and such, so i'm a bit hesitant to work on those bits of code, though i have a few things left on my wishlist in those areas ;) Can anyone tell me what the status is of that code, wether it indeed affects large parts of mailman, or give me a pointer to the patches ? -- Thomas Wouters <thomas(a)xs4all.net> Hi! I'm a .signature virus! copy me into your .signature file to help me spread!

3 2