Mailman 3 March 2004 - Mailman-Developers

Digests: Can you set the From address?
by pareilly＠tcd.ie March 20, 2004

March 20, 2004

I'm looking to add the following feature to 2.1.4 When the DIGESTs are sent out they come from <list>-request@<domain> I'd like to include a descriptive text for the FROM field. eg: '"Talk Mailing List" <talk-request(a)mydomain.com>' I don't mind hacking the code to make this change. Can someone point me in the right direction? Paul

1 0

Scrubber.patch dead
by Gavin Henry March 19, 2004

March 19, 2004

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Don't know if this is the right list. But our own list died a few days ago, and I narrowed it down after reading the FAQ and mailing list to: http://www.mail-archive.com/mailman-users@python.org/msg22519.html So I have followed this, but the patch always dies using either patch -p0 or - -p1. Any chance the patch could be recreated? Maybe with diff -urN instead? I have a big queque in /var/spool/mailman/qfiles/shunt that I need to get rid of :-) Thanks everyone. - -- Kind Regards, Gavin Henry. Director. Open Source. Open Solutions. http://www.suretecsystems.com/contact -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFAW0+zeWseh9tzvqgRArjAAJ4jgtr2d0TPqfDh+5lhC2yVLLfnKQCfal/t oHzVbu3RR/sBTNBkJkgRPBA= =OFJO -----END PGP SIGNATURE-----

1 0

No route to host problem
by Kory Wheatley March 17, 2004

March 17, 2004

When I send a message to a mailman 2.1.4 mailing list using Postfix from a yahoo account. I receive an error message that says "No route to Host". It seems when I send out a message from our domain "isu.edu" they are received, but from any other smtp host I receive the below error: /var/log/maillog:Mar 17 01:55:24 lx5 postfix/smtp[16457]: 10F74124A31: to=<wheakorypersonal(a)yahoo.com>, relay=none, delay=4956, status=deferred (connect to mx4.mail.yahoo.com[216.155.197.63]: No route to host) Here's my main.cf using postconf -n ( would really appreciate help this is critical). (I've been working on this for 15 hours straight and don't have any more troubleshooting ideas) alias_maps = hash:/home/mailman/data/aliases command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 mail_owner = postfix mailq_path = /usr/bin/mailq manpage_directory = /usr/local/man mydestination = $myhostname, localhost.$mydomain, mm.isu.edu myhostname = mm.isu.edu newaliases_path = /usr/bin/newaliases owner_request_special = no queue_directory = /var/spool/postfix readme_directory = /root/postfix_README recipient_delimiter = + sample_directory = /etc/postfix sendmail_path = /usr/sbin/sendmail setgid_group = postdrop unknown_local_recipient_reject_code = 550 [wheakory@lx5 postfix]$ /usr/sbin/postconf -n |more alias_maps = hash:/home/mailman/data/aliases command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 mail_owner = postfix mailq_path = /usr/bin/mailq manpage_directory = /usr/local/man mydestination = $myhostname, localhost.$mydomain, mm.isu.edu myhostname = mm.isu.edu newaliases_path = /usr/bin/newaliases owner_request_special = no queue_directory = /var/spool/postfix readme_directory = /root/postfix_README recipient_delimiter = + sample_directory = /etc/postfix sendmail_path = /usr/sbin/sendmail setgid_group = postdrop unknown_local_recipient_reject_code = 550 [wheakory@lx5 postfix]$ /usr/sbin/postconf -n |more alias_maps = hash:/home/mailman/data/aliases command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 mail_owner = postfix mailq_path = /usr/bin/mailq manpage_directory = /usr/local/man mydestination = $myhostname, localhost.$mydomain, mm.isu.edu myhostname = mm.isu.edu newaliases_path = /usr/bin/newaliases owner_request_special = no queue_directory = /var/spool/postfix readme_directory = /root/postfix_README recipient_delimiter = + sample_directory = /etc/postfix sendmail_path = /usr/sbin/sendmail setgid_group = postdrop unknown_local_recipient_reject_code = 550 -- Kory Wheatley Academic Computing Analyst Sr. Phone 282-3874 ######################################### Everything must point to him.

2 1

Virus sent to lists "from" my domain - add password for moderated users
by Arthur Gibbs March 17, 2004

March 17, 2004

Using Mailman 2.1.3, we have had problems with virus-generated messages with spoofed senders getting through to a one-way list. The only 'solution' I have found is to to disallow any non-moderated users or administrators. This forces all messages, even from list admins, to be moderated. Under Privacy options: [Recipient filters], we set "Ceiling on acceptable number of recipients for a posting" to 1. And also turned on 'Emergency moderation of all list traffic is enabled' in General Options. However this is not ideal. Back in the dark ages I used Majodomo. As primtive as that program was, these virus messages would not be getting through. Reason? The moderated users had to include a password with each post. Could that password type feature be added? A virus might forge the 'form' and the envelope. But it is aweful hard to forge a good password that also matches that from. Any thoughts?

3 3

List backup
by Justin Berman March 16, 2004

March 16, 2004

Hi, I dont know if I am being stupid or not, but is there a way to backup my mailing list? I am currently running Mailman 2.0.11 Thanks Justin Berman Security Engineer tel: +27 11 0860 221 221 fax: +27 11 576 2118 =========================================== Find a job you love, & you will never work a day in your life

1 0

200 000 subscribers
by Fil March 16, 2004

March 16, 2004

Hello there, on my brand new Mailman box (quadriproc, a lot of memory, load near zero), I have uploaded a 200 000 subscribers list, just to see what happens. The Web interface sort of works, but is really slow When I go to http://listes.rezo.net/mailman/admin/test2/members it takes about 25 seconds to get the page. And just a bit less to "search" a subscriber. If the time is taken by sorting, I'd rather not sort and just use the "search" box (I don't need the list view). If it's taken by loading the subscribers base, then I think we have no hope but to wait for a MySQL-based MM3. So my question is: should I wait? If not, where should I start looking? -- Fil

4 7

Mailman 3.0
by Jeff Fisher March 15, 2004

March 15, 2004

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hey guys, Is there publically accessible code for Mailman 3.0 anywhere? I took a look on SF using their CVS web browser and all I saw was a readme for 3.0. Jeff -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFAVbS+pBAut/BiBgoRAnLeAJ0ekvrokC+VtXIRh1rqmnd1VvH3gQCePo+p xfY5NwPtSkq1P/QvYUGKlLs= =gx3a -----END PGP SIGNATURE-----

1 0

Hanging OutgoingRunner
by Mike Porter March 12, 2004

March 12, 2004

Our OutgoingRunner hangs upon occasion. A truss of the process shows that OutgoingRunner is hanging in recv. We feel the most likely reason for this is that the sendmail OutgoingRunner is talking to stopped responding. While fixing our system so that sendmails never hang would be one way to solve the problem, I think there is an easier way [ :-) ], and that is to have the OutgoingRunner timeout on socket operations after so many seconds. Python 2.3 has socket methods settimeout and gettimeout. I'm thinking about using these methods to detect hangs and restart the OutgoingRunner in some fasion. Thoughts? Comments? I'll get some sample code later this afternoon. Details: Mailman 2.1.4 Python 2.3.3 Solaris 9 Thanks, Mike - Mike Porter PGP Fingerprint: F4 AE E1 9F 67 F7 DA EA 2F D2 37 F3 99 ED D1 C2

1 0

Re: [Mailman-Developers] multipart/alternative
by J C Lawrence March 11, 2004

March 11, 2004

On Wed, 10 Mar 2004 21:05:02 -0700 Jim Cole <lists(a)yggdrasill.net> wrote: > However I would prefer not give up all of Mailman's filtering > functionality in order to allow an HTML alternative to pass through > the system. I was looking for a solution that provided me the level of > control that I wanted over how things were filtered. Right. What specific filtering pattern are you looking for? > I just wanted to get some feedback before I started messing with code > that I am largely unfamiliar with. I take a slightly different approach and stuck Davide Salvetti's mimefilter in front of Mailman as that (for me) has the added advantages of not only doing the appropriate MIME manipulations, but sending emails back to the errant posters telling them what has been done to their messages (ie in polite suggestion to stop). -- J C Lawrence ---------(*) Satan, oscillate my metallic sonatas. claw(a)kanga.nu He lived as a devil, eh? http://www.kanga.nu/~claw/ Evil is a name of a foeman, as I live.

2 1

Re: [Mailman-Developers] multipart/alternative
by J C Lawrence March 11, 2004

March 11, 2004

On Wed, 10 Mar 2004 10:46:42 -0700 Jim Cole <lists(a)yggdrasill.net> wrote: > On Mar 10, 2004, at 4:09 AM, Brad Knowles wrote: > I am trying to find a way to ensure that both parts make it through so > that people who prefer html in their mail still have the ability to > view it that way. No, for we've stated a way to do that: turn off filtering -- but you've said you want filtering, but not collapsing of multipart/alternative structures. Rather than go back and forth, why not state exactly the behaviour you do want in regard to MIME types, and we'll see what if anything can be done to meet that. -- J C Lawrence ---------(*) Satan, oscillate my metallic sonatas. claw(a)kanga.nu He lived as a devil, eh? http://www.kanga.nu/~claw/ Evil is a name of a foeman, as I live.

2 1