Mailman 3 February 2013 - Mailman-Developers

Re: [Mailman-Developers] (no subject)
by Barry Warsaw 21 Feb '13

21 Feb '13

On Feb 21, 2013, at 05:19 AM, Sandesh Agrawal wrote: >I managed to get postorius running after much efforts, and i would >suggest some minor changes in the documentation given at : >http://pythonhosted.org/mailman/src/mailman/docs/WebUIin5.html > >1. django version required should be changed to 1.4 from >=1.3 >2. "cd dev_setup" is very confusing as there is no directory named >dev_setup formed. Instead it should be mentioned that developers refer >the documentation in "/postorius/src/postorius/doc/setup.rst" for >further setting up of development server. Hi Sandesh, how would you like to do a merge proposal with your suggested changes? :) Cheers, -Barry

2 1

Re: [Mailman-Developers] gsoc 2013 guidance
by Terri Oda 20 Feb '13

20 Feb '13

On 13-02-19 9:32 AM, mayank bhola wrote: > I would like to contribute to mailman for gsoc 2013 , please guide me for > the same on which type of skills we need to have and show along with > proposal and other details I've been getting lots of questions from prospective students, so I put together a page with some tips: http://wiki.list.org/x/j4Dt Hopefully that will help you get started! If you haven't already looked at the ideas page, I've started trying to include recommended skills there, too: http://wiki.list.org/x/Z4Dt We haven't really established exactly what we will be expecting as far as applications go, but it's a bit early to worry about that -- for now, work on making sure you've got the necessary skills and figuring out what specific project you'd like to work on. Terri

1 0

Re: [Mailman-Developers] (no subject)
by Barry Warsaw 20 Feb '13

20 Feb '13

On Feb 20, 2013, at 09:34 AM, Sandesh Agrawal wrote: >I managed to get postorius setup by using python 2.6 . Python 2.7 was >causing all the trouble(don't know why?) How was Python 2.6 and 2.7 installed? It sounds like you were missing an important module. Maybe that's available in your 2.6 installation but not your 2.7 installation? -Barry

2 1

Re: [Mailman-Developers] (no subject)
by Sandesh Agrawal 19 Feb '13

19 Feb '13

I managed to get postorius setup by using python 2.6 . Python 2.7 was causing all the trouble(don't know why?) But as mentioned in the link : http://pythonhosted.org/mailman/src/mailman/docs/WebUIin5.html i need to go into dev_setup directory , but there is no such directory formed. Is there anything else needed to be done ?

1 0

Re: [Mailman-Developers] GSoC 2013 ideas page
by Terri Oda 19 Feb '13

19 Feb '13

Before I answer anything: Chris, I noticed you've only just signed up for the wiki, so I've granted you editor access now. If you were wondering why there was no edit button before, now you know! On 02/17/2013 07:13 AM, Chris Cargile wrote: > on the matter of having a test-environment image for everyone, I found we > could host the image almost for free on amazon, if needed, and they have > utilities to ease the process of importing/exporting from/to amazon- and > VMware- formats, if for some reason the group wanted amazon web service > portability as a feature at some point, or wanted to collaborate towards > developing an image. I mention this bc as I shared I had a live instance > of MM2 up on an AWS machine, I also thought remote-desktop'ing into an AWS > image which could then be exported might be easy enough and eliminates > uploading large .ISO/.VM-DK files somewhere. > > I would be interested to know more about the format we'd use for creating > and sharing an image and look forward to working with the team I really like the idea of having a Mailman 3 AWS machine in general. It'd be really awesome to be able to have people just spin up a working Mailman 3 instance to help answer their own questions about the state of the UI and whatnot. So +1 to that if you're interested in setting it up and just linking it from the wiki. I'm a bit hesitant to assume that it'll be useful for the students since cloud computing costs money, and if you're a prospective GSoC student it might not seem worthwhile to outlay money to spin up an instance until you've actually been accepted and know you'll be paid. So ideally, we'd also want to have a downloadable VM that anyone could use. I personally can provide temporary hosting if I ask my sysadmin nicely so we know to keep an eye on traffic, and we might be able to find something more permanent with python.org or others, so for now, if you're interested in setting up a giant file, assume that we'll have somewhere to put it and go ahead. Terri

1 0

gsoc 2013 guidance
by mayank bhola 19 Feb '13

19 Feb '13

Hello there, I would like to contribute to mailman for gsoc 2013 , please guide me for the same on which type of skills we need to have and show along with proposal and other details -- Regards *Mayank Bhola*

1 0

Re: [Mailman-Developers] (no subject)
by Sandesh Agrawal 18 Feb '13

18 Feb '13

I meant bzip2 On Tue, Feb 19, 2013 at 12:51 PM, Sandesh Agrawal <sakuag333(a)gmail.com> wrote: > bzip was not installed so i installed it, but still the error was not > resolved. I am getting the same error again. > > Cheers, > Sandesh > > On Tue, Feb 19, 2013 at 2:14 AM, Florian Fuchs <flo.fuchs(a)gmail.com> wrote: >> -----BEGIN PGP SIGNED MESSAGE----- >> Hash: SHA1 >> >> Hello Sandesh, >> >> is it possible that bzip2 is not installed on your machine? >> >> Florian >> >> >> On 02/18/2013 07:12 AM, Sandesh Agrawal wrote: >>> While setting up postorius, i am getting the following error during >>> this step sudo python setup.py develop as given in the link : >>> http://pythonhosted.org/mailman/src/mailman/docs/WebUIin5.html >>> >>> -------------------------------------------------- Processing >>> mocker-1.1.1.tar.bz2 error: Not a recognized archive type: >>> /tmp/easy_install-xxvsrr/mocker-1.1.1.tar.bz2 >>> ------------------------------------------------------ >>> _______________________________________________ Mailman-Developers >>> mailing list Mailman-Developers(a)python.org >>> http://mail.python.org/mailman/listinfo/mailman-developers Mailman >>> FAQ: http://wiki.list.org/x/AgA3 Searchable Archives: >>> http://www.mail-archive.com/mailman-developers%40python.org/ >>> Unsubscribe: >>> http://mail.python.org/mailman/options/mailman-developers/f%40state-of-mind… >>> >>> Security Policy: http://wiki.list.org/x/QIA9 >>> >> >> - -- >> Florian Fuchs >> Heckmannufer 2 >> 10997 Berlin >> 0176 - 206 408 12 >> 030 - 301 367 56 >> flo.fuchs(a)gmail.com >> -----BEGIN PGP SIGNATURE----- >> Version: GnuPG v1.4.11 (GNU/Linux) >> Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ >> >> iQEcBAEBAgAGBQJRIpKpAAoJEAszfsgOAINu7mEIAMCB1aCpOlWXA5aWTNyYoNvA >> JWn5rxQd9vsKB5NM4yJv5/QRYsgX3DEfrHdiU53i8YiopLSZkL5FbWMsQ99J4a/C >> d6wT9y0NG4w73QZXW8rdqtVlNsBhigX69z96u0/iaQMqz581f0kDE8UvZ2llQDdm >> SPbWgBhUrR1avEApS7jP9mwuLWJPO/pZBud9CSzRneph0+kfyyEGzwck4GEfzhSs >> pZbsZZKbsl83/eKct8ixc3Opkq4akE81qa+egqYStpsd+b3Qw5yut+hvogsmI/kb >> fxWI6Ke6hyEkn0fy9y6auuKo5a05yUfggJLQ2KjojiPS0FCp2iSUPRFlPiumGjg= >> =kiya >> -----END PGP SIGNATURE----- >> _______________________________________________ >> Mailman-Developers mailing list >> Mailman-Developers(a)python.org >> http://mail.python.org/mailman/listinfo/mailman-developers >> Mailman FAQ: http://wiki.list.org/x/AgA3 >> Searchable Archives: http://www.mail-archive.com/mailman-developers%40python.org/ >> Unsubscribe: http://mail.python.org/mailman/options/mailman-developers/sakuag333%40gmail… >> >> Security Policy: http://wiki.list.org/x/QIA9

1 0

Re: [Mailman-Developers] (no subject)
by Florian Fuchs 18 Feb '13

18 Feb '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello Sandesh, is it possible that bzip2 is not installed on your machine? Florian On 02/18/2013 07:12 AM, Sandesh Agrawal wrote: > While setting up postorius, i am getting the following error during > this step sudo python setup.py develop as given in the link : > http://pythonhosted.org/mailman/src/mailman/docs/WebUIin5.html > > -------------------------------------------------- Processing > mocker-1.1.1.tar.bz2 error: Not a recognized archive type: > /tmp/easy_install-xxvsrr/mocker-1.1.1.tar.bz2 > ------------------------------------------------------ > _______________________________________________ Mailman-Developers > mailing list Mailman-Developers(a)python.org > http://mail.python.org/mailman/listinfo/mailman-developers Mailman > FAQ: http://wiki.list.org/x/AgA3 Searchable Archives: > http://www.mail-archive.com/mailman-developers%40python.org/ > Unsubscribe: > http://mail.python.org/mailman/options/mailman-developers/f%40state-of-mind… > > Security Policy: http://wiki.list.org/x/QIA9 > - -- Florian Fuchs Heckmannufer 2 10997 Berlin 0176 - 206 408 12 030 - 301 367 56 flo.fuchs(a)gmail.com -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQEcBAEBAgAGBQJRIpKpAAoJEAszfsgOAINu7mEIAMCB1aCpOlWXA5aWTNyYoNvA JWn5rxQd9vsKB5NM4yJv5/QRYsgX3DEfrHdiU53i8YiopLSZkL5FbWMsQ99J4a/C d6wT9y0NG4w73QZXW8rdqtVlNsBhigX69z96u0/iaQMqz581f0kDE8UvZ2llQDdm SPbWgBhUrR1avEApS7jP9mwuLWJPO/pZBud9CSzRneph0+kfyyEGzwck4GEfzhSs pZbsZZKbsl83/eKct8ixc3Opkq4akE81qa+egqYStpsd+b3Qw5yut+hvogsmI/kb fxWI6Ke6hyEkn0fy9y6auuKo5a05yUfggJLQ2KjojiPS0FCp2iSUPRFlPiumGjg= =kiya -----END PGP SIGNATURE-----

2 1

PyCon US 2013 sprint wiki page
by Terri Oda 18 Feb '13

18 Feb '13

Since I was already poking around in the wiki today, I set up a page for the PyCon 2013 sprint next month. I'm claiming that Barry and Florian are coming 'cause I'm pretty sure they said they were, but if the rest of you would like to announce your attendance or start suggesting things we should be discussing or hacking... here's the place to do it: http://wiki.list.org/display/DEV/PyCon+Sprint+2013

3 2

(no subject)
by Sandesh Agrawal 17 Feb '13

17 Feb '13

While setting up postorius, i am getting the following error during this step sudo python setup.py develop as given in the link : http://pythonhosted.org/mailman/src/mailman/docs/WebUIin5.html -------------------------------------------------- Processing mocker-1.1.1.tar.bz2 error: Not a recognized archive type: /tmp/easy_install-xxvsrr/mocker-1.1.1.tar.bz2 ------------------------------------------------------

1 0