Mailman 3 September 2001 - Mailman-Developers

Archives not showing threading
by David A Gilbert 06 Sep '01

06 Sep '01

Hello, Does anyone know why archives are not showing threading? I look at the archives on this list (at http://mail.python.org/pipermail/mailman-developers/2001-August/thread.html, for example) and when View by Thread, they are nicely tabbed with a different style bullet for each reply. Ours are showing up all left-justified, no bullets. Have seen this problem for months and nobody seems to have any suggestions, does anyone here have any ideas?? Thanks in advance. David Gilbert dagilbert(a)west.raytheon.com ----- Forwarded by David A Gilbert/RWS/Raytheon/US on 09/06/2001 05:00 PM ----- David A Gilbert To: mailman-users(a)python.org cc: 09/02/2001 Subject: Archives not showing threading 09:02 PM I am using mailman-2.0.6 on RedHat Linux 6.2 machine. None of mail archives show the indented threading when the view by thread sort is selected. All messages are left-justified. Is there any configuration of mailman, pipermail, etc, that needs to be done to enable this? Thanks, David Gilbert dagilbert(a)west.raytheon.com

1 0

Re: [Mailman-Users] Wrapper gid problem (Includes Patch against 2.0.6)
by Ben Burnett 05 Sep '01

05 Sep '01

(my advanced apologies for hitting both the -users and -developers lists. I thought it would be applicable to both) I agree that this error message is pretty ambiguous. I participated in a thread about this started by Harold Paulson whom I thought had a pretty good idea of how to fix this. http://mail.python.org/pipermail/mailman-users/2001-April/010955.html Since then I've seen this question asked, answered, and ignored many times on the list. I realize that the error message says "Please read the INSTALL instructions again, paying close attention to the --with-cgi-gid configure option", however I don't really see any reason that this shouldn't be more explicit. I'm all for terseness, and I would rather see this list become more terse and the error message grow. As I mentioned in the April thread, I think that the message should read: "Mailman CGI error! Mailman was compiled to use GID 48, but the web server is running as GID 99. You must run ./configure again --with-cgi-gid=99, or reconfigure your web server." Instead of just whining about it like I did last time I figured I'd put together the following patch against 2.0.6 to common.c to make it do just that. I've tested this on my machine and it works just fine. ----------begin patch------------ *** ./src/common.c.bak Wed Sep 5 14:51:51 2001 --- ./src/common.c Wed Sep 5 14:57:43 2001 *************** *** 124,129 **** if (parentgid != mygid) { fatal(ident, GID_MISMATCH, ! "Failure to exec script. WANTED gid %ld, GOT gid %ld. " ! "(Reconfigure to take %ld?)", parentgid, mygid, mygid); } --- 124,131 ---- if (parentgid != mygid) { fatal(ident, GID_MISMATCH, ! "Mailman CGI error! Mailman was compiled to use\n " ! "GID %ld, but the web server is running as GID %ld.\n " ! "You must run ./configure again with the option\n " ! "--with-cgi-gid=%ld, or reconfigure your web server.", parentgid, mygid, mygid); } ----------end patch------------ I hope this is useful, - Ben P.S. Notice that the line separator I'm using is just the UNIX separator. I imagine if someone wants to port this to Windows this will need to be fixed, but I don't know enough about python to find a platform portable line separator. Is there such a thing? ( in Perl it's $/ )

1 0

The New Version IV Internal Antenna & it is FREE
by guillermo antonio acosta jr 05 Sep '01

05 Sep '01

1 0

[PATCH v2] Smaller, cleaner --with-python patch
by Ben Gertzfield 04 Sep '01

04 Sep '01

Howdy again, Mailman folks. The last patch I provided to make it possible to build Python using --with-python=/usr/bin/python2 (or a python named anything) was pretty big and unwieldy, I agree. This is a much smaller, better solution. With the old patch, we renamed (for example) bin/newlist to bin/newlist.in, and changed #! /usr/bin/env python to #! /usr/bin/env @PYTHON@ . Then, we added bin/newlist to the AC_OUTPUT macro in configure.in, which made a ./configure do the proper expansion. But it made the patch huge, and would not only ruin the CVS logs for those files, but would force programmers to guess whether they should edit bin/foo.in or bin/foo. This new patch makes a temporary build/ top-level subdirectory when ./configure is run, and uses a bit of autoconf magic to macro-expand bin/newlist to build/bin/newlist. This works beautifully; the Makefile.in files in various directories just had to be modified to use ../build/bin (etc.) as a prefix to the filename to be installed on a make install. I also added a little macro in the configure.in to convert a long string like: bin/update \ bin/newlist \ bin/check_perms to: build/bin/update:bin/update \ build/bin/newlist:bin/newlist \ build/bin/check_perms:bin/check_perms This way, we just keep a variable called MM_SCRIPTS in the first format in configure.in, which lists everything that's considered a script and should be macro-expanded. I hope this patch will be more acceptable. It's very small (700 lines) but fixes the problem. It's really critical that this be accepted before Mailman 2.1 comes out, or it'll be unusable on systems that have python 2.0 installed as /usr/bin/python2 or /usr/local/bin/python2. Ben Patch follows. diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/Makefile.in mailman/Makefile.in --- mailman.cvs.orig/Makefile.in Thu Jul 19 06:49:19 2001 +++ mailman/Makefile.in Wed Sep 5 11:38:42 2001 @@ -137,3 +137,5 @@ (cd $$d; $(MAKE) distclean); \ done -rm -f config.cache config.log config.status Makefile + -rm -rf build + diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/bin/Makefile.in mailman/bin/Makefile.in --- mailman.cvs.orig/bin/Makefile.in Tue Aug 21 05:08:41 2001 +++ mailman/bin/Makefile.in Wed Sep 5 11:14:49 2001 @@ -47,6 +47,8 @@ version config_list list_lists dumpdb fix_url.py \ list_admins genaliases change_pw mailmanctl qrunner +BUILDDIR= ../build/bin + # Modes for directories and executables created by the install # process. Default to group-writable directories but # user-only-writable for executables. @@ -63,7 +65,7 @@ install: for f in $(SCRIPTS); \ do \ - $(INSTALL) -m $(EXEMODE) $$f $(SCRIPTSDIR); \ + $(INSTALL) -m $(EXEMODE) $(BUILDDIR)/$$f $(SCRIPTSDIR); \ done finish: diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/bin/add_members mailman/bin/add_members --- mailman.cvs.orig/bin/add_members Sat Aug 4 11:05:41 2001 +++ mailman/bin/add_members Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000,2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/bin/arch mailman/bin/arch --- mailman.cvs.orig/bin/arch Thu Jul 26 14:30:28 2001 +++ mailman/bin/arch Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000,2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/bin/change_pw mailman/bin/change_pw --- mailman.cvs.orig/bin/change_pw Sat Aug 4 11:05:41 2001 +++ mailman/bin/change_pw Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/bin/check_db mailman/bin/check_db --- mailman.cvs.orig/bin/check_db Fri Dec 8 04:33:52 2000 +++ mailman/bin/check_db Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/bin/check_perms mailman/bin/check_perms --- mailman.cvs.orig/bin/check_perms Mon Jul 2 22:55:23 2001 +++ mailman/bin/check_perms Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000,2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/bin/clone_member mailman/bin/clone_member --- mailman.cvs.orig/bin/clone_member Mon Jul 30 06:26:49 2001 +++ mailman/bin/clone_member Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000,2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/bin/config_list mailman/bin/config_list --- mailman.cvs.orig/bin/config_list Sat May 26 00:18:34 2001 +++ mailman/bin/config_list Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000,2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/bin/digest_arch mailman/bin/digest_arch --- mailman.cvs.orig/bin/digest_arch Mon Mar 26 09:03:46 2001 +++ mailman/bin/digest_arch Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000,2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/bin/dumpdb mailman/bin/dumpdb --- mailman.cvs.orig/bin/dumpdb Thu Jul 12 05:11:24 2001 +++ mailman/bin/dumpdb Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000,2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/bin/find_member mailman/bin/find_member --- mailman.cvs.orig/bin/find_member Thu Jul 19 12:28:20 2001 +++ mailman/bin/find_member Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/bin/genaliases mailman/bin/genaliases --- mailman.cvs.orig/bin/genaliases Wed Sep 5 12:04:45 2001 +++ mailman/bin/genaliases Wed Sep 5 11:36:49 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/bin/list_admins mailman/bin/list_admins --- mailman.cvs.orig/bin/list_admins Thu Mar 22 12:42:00 2001 +++ mailman/bin/list_admins Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/bin/list_lists mailman/bin/list_lists --- mailman.cvs.orig/bin/list_lists Fri Dec 8 04:33:52 2000 +++ mailman/bin/list_lists Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/bin/list_members mailman/bin/list_members --- mailman.cvs.orig/bin/list_members Thu Jul 19 12:28:20 2001 +++ mailman/bin/list_members Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/bin/mailmanctl mailman/bin/mailmanctl --- mailman.cvs.orig/bin/mailmanctl Thu Aug 16 04:38:00 2001 +++ mailman/bin/mailmanctl Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # Copyright (C) 2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/bin/mmsitepass mailman/bin/mmsitepass --- mailman.cvs.orig/bin/mmsitepass Fri Jun 1 01:15:05 2001 +++ mailman/bin/mmsitepass Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000,2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/bin/newlist mailman/bin/newlist --- mailman.cvs.orig/bin/newlist Tue Aug 21 00:15:56 2001 +++ mailman/bin/newlist Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000,2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/bin/pygettext.py mailman/bin/pygettext.py --- mailman.cvs.orig/bin/pygettext.py Sat Jul 28 02:22:55 2001 +++ mailman/bin/pygettext.py Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # Originally written by Barry Warsaw <barry(a)zope.com> # # Minimally patched to make it even more xgettext compatible diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/bin/qrunner mailman/bin/qrunner --- mailman.cvs.orig/bin/qrunner Fri Jul 6 06:58:21 2001 +++ mailman/bin/qrunner Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # Copyright (C) 2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/bin/remove_members mailman/bin/remove_members --- mailman.cvs.orig/bin/remove_members Fri Jul 20 05:01:48 2001 +++ mailman/bin/remove_members Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/bin/rmlist mailman/bin/rmlist --- mailman.cvs.orig/bin/rmlist Thu May 10 00:04:15 2001 +++ mailman/bin/rmlist Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000,2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/bin/sync_members mailman/bin/sync_members --- mailman.cvs.orig/bin/sync_members Thu Jul 19 12:28:20 2001 +++ mailman/bin/sync_members Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/bin/update mailman/bin/update --- mailman.cvs.orig/bin/update Thu Aug 16 06:30:26 2001 +++ mailman/bin/update Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000,2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/bin/version mailman/bin/version --- mailman.cvs.orig/bin/version Fri Dec 8 04:33:52 2000 +++ mailman/bin/version Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/bin/withlist mailman/bin/withlist --- mailman.cvs.orig/bin/withlist Wed Aug 1 15:30:33 2001 +++ mailman/bin/withlist Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000,2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/configure mailman/configure --- mailman.cvs.orig/configure Sat Aug 18 08:20:12 2001 +++ mailman/configure Wed Sep 5 11:30:56 2001 @@ -1,6 +1,6 @@ #! /bin/sh -# From configure.in Revision: 2.11 +# From configure.in Revision: 2.12 # Guess values for system-dependent variables and create Makefiles. # Generated automatically using autoconf version 2.13 @@ -1980,6 +1980,59 @@ done + + + + + +SCRIPTS="build/contrib/rotatelogs.py:contrib/rotatelogs.py \ +build/contrib/qmail-to-mailman.py:contrib/qmail-to-mailman.py \ +build/contrib/securelinux_fix.py:contrib/securelinux_fix.py \ +build/filters/bowa-strip:filters/bowa-strip \ +build/cron/senddigests:cron/senddigests \ +build/cron/bumpdigests:cron/bumpdigests \ +build/cron/nightly_gzip:cron/nightly_gzip \ +build/cron/mailpasswds:cron/mailpasswds \ +build/cron/gate_news:cron/gate_news \ +build/cron/checkdbs:cron/checkdbs \ +build/bin/update:bin/update \ +build/bin/newlist:bin/newlist \ +build/bin/check_perms:bin/check_perms \ +build/bin/find_member:bin/find_member \ +build/bin/withlist:bin/withlist \ +build/bin/mailmanctl:bin/mailmanctl \ +build/bin/change_pw:bin/change_pw \ +build/bin/list_admins:bin/list_admins \ +build/bin/check_db:bin/check_db \ +build/bin/list_lists:bin/list_lists \ +build/bin/pygettext.py:bin/pygettext.py \ +build/bin/qrunner:bin/qrunner \ +build/bin/clone_member:bin/clone_member \ +build/bin/genaliases:bin/genaliases \ +build/bin/digest_arch:bin/digest_arch \ +build/bin/arch:bin/arch \ +build/bin/rmlist:bin/rmlist \ +build/bin/mmsitepass:bin/mmsitepass \ +build/bin/version:bin/version \ +build/bin/remove_members:bin/remove_members \ +build/bin/config_list:bin/config_list \ +build/bin/list_members:bin/list_members \ +build/bin/sync_members:bin/sync_members \ +build/bin/add_members:bin/add_members \ +build/bin/dumpdb:bin/dumpdb \ +build/scripts/mailowner:scripts/mailowner \ +build/scripts/mailcmd:scripts/mailcmd \ +build/scripts/post:scripts/post \ +build/scripts/leave:scripts/leave \ +build/scripts/join:scripts/join \ +build/scripts/auto:scripts/auto " + + + +# These directories are temporary directories to store macro-expanded +# scripts. They're removed on a make distclean, so we make them here. +mkdir -p build/bin build/scripts build/contrib build/filters build/cron + trap '' 1 2 15 cat > confcache <<\EOF # This file is a shell script that caches the results of configure @@ -2101,7 +2154,8 @@ Mailman/Queue/Makefile Mailman/MTA/Makefile Mailman/Gui/Makefile templates/Makefile cron/Makefile filters/Makefile scripts/Makefile messages/Makefile - cron/crontab.in misc/mailman Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 + cron/crontab.in misc/mailman Makefile + $SCRIPTS" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 EOF cat >> $CONFIG_STATUS <<EOF @@ -2151,6 +2205,7 @@ s%@FQDN@%$FQDN%g s%@URL@%$URL%g s%@CPP@%$CPP%g +s%@SCRIPTS@%$SCRIPTS%g CEOF EOF @@ -2200,7 +2255,8 @@ Mailman/Queue/Makefile Mailman/MTA/Makefile Mailman/Gui/Makefile templates/Makefile cron/Makefile filters/Makefile scripts/Makefile messages/Makefile - cron/crontab.in misc/mailman Makefile"} + cron/crontab.in misc/mailman Makefile + $SCRIPTS"} EOF cat >> $CONFIG_STATUS <<\EOF for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then @@ -2271,3 +2327,6 @@ rm -fr confdefs* $ac_clean_files test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 + +# Make sure all the build scripts are executable. +chmod -R +x build diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/configure.in mailman/configure.in --- mailman.cvs.orig/configure.in Sat Aug 18 08:20:12 2001 +++ mailman/configure.in Wed Sep 5 11:30:51 2001 @@ -470,6 +470,70 @@ # Checks for library functions. AC_CHECK_FUNCS(vsnprintf) +dnl Expand PYTHON path in the scripts, output into build/scriptname + +AC_DEFUN(MM_SCRIPTS, [dnl +contrib/rotatelogs.py \ +contrib/qmail-to-mailman.py \ +contrib/securelinux_fix.py \ +filters/bowa-strip \ +cron/senddigests \ +cron/bumpdigests \ +cron/nightly_gzip \ +cron/mailpasswds \ +cron/gate_news \ +cron/checkdbs \ +bin/update \ +bin/newlist \ +bin/check_perms \ +bin/find_member \ +bin/withlist \ +bin/mailmanctl \ +bin/change_pw \ +bin/list_admins \ +bin/check_db \ +bin/list_lists \ +bin/pygettext.py \ +bin/qrunner \ +bin/clone_member \ +bin/genaliases \ +bin/digest_arch \ +bin/arch \ +bin/rmlist \ +bin/mmsitepass \ +bin/version \ +bin/remove_members \ +bin/config_list \ +bin/list_members \ +bin/sync_members \ +bin/add_members \ +bin/dumpdb \ +scripts/mailowner \ +scripts/mailcmd \ +scripts/post \ +scripts/leave \ +scripts/join \ +scripts/auto ]) + +dnl Please make sure to leave a space at the end of the last entry. +dnl (This is so we don't have to use [a-z/] style character classes +dnl in the regexp below and mess with m4 quoting, which is not fun.) + +dnl This regexp munges each line in MM_SCRIPTS, replacing: +dnl path/script \ +dnl with: +dnl build/path/script:path/script \ +dnl so that we can macro-expand variables in scripts without using +dnl script.in filenames, outputting the new files in build/ . + +SCRIPTS="patsubst(MM_SCRIPTS, $.+$ $\\?$, build/\1:\1 \2)" + +AC_SUBST(SCRIPTS) + +# These directories are temporary directories to store macro-expanded +# scripts. They're removed on a make distclean, so we make them here. +mkdir -p build/bin build/scripts build/contrib build/filters build/cron + dnl Output everything AC_OUTPUT([misc/paths.py Mailman/Defaults.py Mailman/mm_cfg.py.dist src/Makefile misc/Makefile bin/Makefile @@ -479,4 +543,8 @@ Mailman/Queue/Makefile Mailman/MTA/Makefile Mailman/Gui/Makefile templates/Makefile cron/Makefile filters/Makefile scripts/Makefile messages/Makefile - cron/crontab.in misc/mailman Makefile]) + cron/crontab.in misc/mailman Makefile + $SCRIPTS]) + +# Make sure all the build scripts are executable. +chmod -R +x build diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/contrib/qmail-to-mailman.py mailman/contrib/qmail-to-mailman.py --- mailman.cvs.orig/contrib/qmail-to-mailman.py Fri Dec 8 01:53:21 2000 +++ mailman/contrib/qmail-to-mailman.py Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # Configuration variables - Change these for your site if necessary. MailmanHome = "/home/mailman"; # Mailman home directory. diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/contrib/rotatelogs.py mailman/contrib/rotatelogs.py --- mailman.cvs.orig/contrib/rotatelogs.py Sat Aug 4 11:06:06 2001 +++ mailman/contrib/rotatelogs.py Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 2000 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/contrib/securelinux_fix.py mailman/contrib/securelinux_fix.py --- mailman.cvs.orig/contrib/securelinux_fix.py Mon Mar 19 01:52:48 2001 +++ mailman/contrib/securelinux_fix.py Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000,2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/cron/Makefile.in mailman/cron/Makefile.in --- mailman.cvs.orig/cron/Makefile.in Sat Aug 4 11:06:50 2001 +++ mailman/cron/Makefile.in Wed Sep 5 11:14:38 2001 @@ -44,6 +44,8 @@ nightly_gzip bumpdigests FILES= crontab.in +BUILDDIR= ../build/cron + # Modes for directories and executables created by the install # process. Default to group-writable directories but # user-only-writable for executables. @@ -62,7 +64,7 @@ done for f in $(PROGRAMS); \ do \ - $(INSTALL) -m $(EXEMODE) $$f $(CRONDIR); \ + $(INSTALL) -m $(EXEMODE) $(BUILDDIR)/$$f $(CRONDIR); \ done finish: diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/cron/bumpdigests mailman/cron/bumpdigests --- mailman.cvs.orig/cron/bumpdigests Sat Jul 28 01:35:45 2001 +++ mailman/cron/bumpdigests Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000,2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/cron/checkdbs mailman/cron/checkdbs --- mailman.cvs.orig/cron/checkdbs Sat Jul 28 01:35:45 2001 +++ mailman/cron/checkdbs Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000,2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/cron/gate_news mailman/cron/gate_news --- mailman.cvs.orig/cron/gate_news Sat Jul 28 01:35:45 2001 +++ mailman/cron/gate_news Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000,2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/cron/mailpasswds mailman/cron/mailpasswds --- mailman.cvs.orig/cron/mailpasswds Sat Aug 4 14:23:56 2001 +++ mailman/cron/mailpasswds Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000,2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/cron/nightly_gzip mailman/cron/nightly_gzip --- mailman.cvs.orig/cron/nightly_gzip Sat Jul 28 01:35:45 2001 +++ mailman/cron/nightly_gzip Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000,2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/cron/senddigests mailman/cron/senddigests --- mailman.cvs.orig/cron/senddigests Sat Jul 28 01:35:45 2001 +++ mailman/cron/senddigests Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000,2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/filters/Makefile.in mailman/filters/Makefile.in --- mailman.cvs.orig/filters/Makefile.in Fri Dec 8 01:53:22 2000 +++ mailman/filters/Makefile.in Wed Sep 5 11:15:23 2001 @@ -43,6 +43,8 @@ FILTERS= bowa-strip +BUILDDIR= ../build/filters + # Modes for directories and executables created by the install # process. Default to group-writable directories but # user-only-writable for executables. @@ -59,7 +61,7 @@ install: for f in $(FILTERS); \ do \ - $(INSTALL) -m $(FILEMODE) $$f $(FILTERSDIR); \ + $(INSTALL) -m $(FILEMODE) $(BUILDDIR)/$$f $(FILTERSDIR); \ done finish: diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/filters/bowa-strip mailman/filters/bowa-strip --- mailman.cvs.orig/filters/bowa-strip Fri Dec 8 01:53:22 2000 +++ mailman/filters/bowa-strip Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/messages/Makefile.in mailman/messages/Makefile.in --- mailman.cvs.orig/messages/Makefile.in Sat Aug 18 06:24:01 2001 +++ mailman/messages/Makefile.in Wed Sep 5 11:43:50 2001 @@ -62,7 +62,7 @@ EXEMODE= 755 FILEMODE= 644 INSTALL_PROGRAM=$(INSTALL) -m $(EXEMODE) -PROG= bin/pygettext.py +PROG= build/bin/pygettext.py .SUFFIXES: .po .mo .po.mo: @@ -117,7 +117,7 @@ docstring.files: @echo "Calculating script input files for pygettext" - (cd ..; grep -d skip -l '^#! /usr/bin/env python' `find bin cron scripts -name ".#*" -prune -o -print` >| messages/$@) + (cd ..; grep -d skip -l '^#! /usr/bin/env @PYTHON@' `find bin cron scripts -name ".#*" -prune -o -print` >| messages/$@) mailman.pot: marked.files docstring.files @echo "Running pygettext on $@; this make take a while." diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/misc/Cookie.py mailman/misc/Cookie.py --- mailman.cvs.orig/misc/Cookie.py Sun Aug 19 03:22:11 2001 +++ mailman/misc/Cookie.py Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#! /usr/bin/env @PYTHON@ """ #### diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/misc/Makefile.in mailman/misc/Makefile.in --- mailman.cvs.orig/misc/Makefile.in Wed Sep 5 12:04:47 2001 +++ mailman/misc/Makefile.in Wed Sep 5 11:16:23 2001 @@ -56,12 +56,14 @@ PATHSDIRS= bin cron scripts ICONS= *.jpg *.png +BUILDDIR= ../build/misc + # Rules all: install: - $(INSTALL) -m $(FILEMODE) Cookie.py $(PACKAGEDIR) + $(INSTALL) -m $(FILEMODE) $(BUILDDIR)/Cookie.py $(PACKAGEDIR) $(INSTALL) -m $(FILEMODE) $(ICONS) $(ICONDIR) for d in $(PATHSDIRS); \ do \ diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/scripts/Makefile.in mailman/scripts/Makefile.in --- mailman.cvs.orig/scripts/Makefile.in Sat Aug 4 11:26:54 2001 +++ mailman/scripts/Makefile.in Wed Sep 5 11:29:46 2001 @@ -42,6 +42,8 @@ SCRIPTS= mailcmd mailowner post driver join leave +BUILDDIR= ../build/scripts + # Modes for directories and executables created by the install # process. Default to group-writable directories but # user-only-writable for executables. @@ -58,7 +60,7 @@ install: for f in $(SCRIPTS); \ do \ - $(INSTALL) -m $(FILEMODE) $$f $(SCRIPTSDIR); \ + $(INSTALL) -m $(FILEMODE) $(BUILDDIR)/$$f $(SCRIPTSDIR); \ done finish: diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/scripts/auto mailman/scripts/auto --- mailman.cvs.orig/scripts/auto Thu Jun 28 08:00:47 2001 +++ mailman/scripts/auto Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 2000,2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/scripts/join mailman/scripts/join --- mailman.cvs.orig/scripts/join Thu Jun 28 08:01:22 2001 +++ mailman/scripts/join Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/scripts/leave mailman/scripts/leave --- mailman.cvs.orig/scripts/leave Thu Jun 28 08:01:42 2001 +++ mailman/scripts/leave Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/scripts/mailcmd mailman/scripts/mailcmd --- mailman.cvs.orig/scripts/mailcmd Thu Jun 28 08:02:03 2001 +++ mailman/scripts/mailcmd Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000,2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/scripts/mailowner mailman/scripts/mailowner --- mailman.cvs.orig/scripts/mailowner Thu Jun 28 08:02:29 2001 +++ mailman/scripts/mailowner Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000,2001 by the Free Software Foundation, Inc. # diff -x *.pot -x *.po -x *.mo -x CVS -ruN mailman.cvs.orig/scripts/post mailman/scripts/post --- mailman.cvs.orig/scripts/post Thu Jun 28 08:02:46 2001 +++ mailman/scripts/post Mon Sep 3 13:57:23 2001 @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env @PYTHON@ # # Copyright (C) 1998,1999,2000,2001 by the Free Software Foundation, Inc. #

2 2

A bug?
by Mikhail Sobolev 04 Sep '01

04 Sep '01

While trying to subscribe to a newly created list running under CVS version of Mailman, I found that the subject line for a confirmation request looks strange: confirm %(cookie)s I attach two (since I do not know what way is kocher :) patches that seem to fix this problem. Regards, -- Misha

2 2

A small patch. Manual.py
by Mikhail Sobolev 04 Sep '01

04 Sep '01

Today I tried to install the CVS version on my computer. Here is the patch that helped me. Regards, -- Misha

2 1

Proposed new subscribeack.txt
by Tom Geller 03 Sep '01

03 Sep '01

Hey, gang. I'm not a regular on this list; please let me know if I should follow some other procedure for proposing a new text. Anyhoo... my users on spamcon.org lists seemed confused by the subscribeack.txt text, so I rewrote it. I think the one shown below is clearer in the following ways: 1) Warns the reader that the message is important up front (most just toss it otherwise) 2) Gives password earlier (in the first screen) 3) Gives unsubscribe instructions early 4) More straightforward overall. One thing that would improve it is to also give the %(address)s string (or whichever one is appropriate) on lines like: TO UNSUBSCRIBE: unsubscribe %(password)s I couldn't figure out how to do that. (I couldn't find a list of %()s variables. If one exists, I'd appreciate direction.) Submitted for possible inclusion in future revs. Best, --Tom Geller Executive Director, SpamCon Foundation ---begin proposed subscribeack.txt--- Welcome to the %(real_name)s@%(host_name)s mailing list! *** SAVE THIS MESSAGE *** TO UNSUBSCRIBE OR CHANGE YOUR OPTIONS VIA THE WEB: %(optionsurl)s %(umbrella)s Your password is %(password)s. TO UNSUBSCRIBE OR CHANGE YOUR OPTIONS VIA EMAIL: Send a message to %(real_name)s-request@%(host_name)s from your subscription address, with the appropriate text in the subject or body of the message: TO UNSUBSCRIBE: unsubscribe %(password)s TO RECEIVE A DAILY DIGEST: set digest on %(password)s TO GET A FULL LIST OF COMMANDS: help --- %(welcome)s If this is a discussion list, you can post to it by sending your email to: %(emailaddr)s General information about the mailing list is at: %(listinfo_url)s If you forget your password, don't worry, you will receive a monthly reminder telling you what all your %(host_name)s mailing list passwords are, and how to unsubscribe or change your options. There is also a button on your options page that will email your current password to you. Enjoy your time on the list! ---end--- -- Tom Geller * tom(a)spamcon.org * +1-415-552-2557 Executive Director, SpamCon Foundation <http://www.spamcon.org> A California non-profit organization Protecting email as a medium of communications and commerce Donations: <http://www.spamcon.org/donations>

1 0

[PATCH] Duplicate mail avoiding in Mailman
by Ben Gertzfield 02 Sep '01

02 Sep '01

Finally! Here's the patch to avoid sending out list duplicates to users who don't want it. This is a solution to the never-ending feuding on various Debian mailing lists about whether or not people should Cc: folks already on the list; hopefully, this user-configurable behavior will make everyone's lives easier. This patch is against mailman CVS. The patch adds a DontReceiveDuplicates flag to mm_cfg (value 128). By default, this is 0, which is the same as our current behavior. If DontReceiveDuplicates is set to 1 for the user, then they will not receive a list message if: 1) the qrunner process has already set a mail with that message-id to that user -or- 2) the user is specifically listed in the To:, Cc:, Resent-To:, or Resent-Cc: fields. If DontReceiveDuplicates is set to 0 and Personalization is enabled for the list, a X-Mailman-Duplicate: yes will be added to every duplicate message sent out (not the first) to allow users to filter for themselves. I have not done any i18n for this code, mea culpa. But the option is settable via the web interface or the mail interface. (it's the "nodupes" option via mail.) Issues: 1) What happens if people fake their Message-IDs? It's possible (but hard) to stop real list mail from coming through to someone who doesn't get duplicates, if you send out lots of messages with the same Message-ID. 2) Does this use a lot of memory? I'm using a two-level hash to store the message IDs and email addresses that have been seen; I don't know if this will grow huge on big sites. 3) Is there any way to add the X-Mailman-Duplicate: yes header to various users when the admin is not using Personalization on the lists? 4) If multiple qrunner processes end up handling mails, it's possible a user who doesn't want duplicates will get them. How can we fix this? 5) Some users probably don't want list duplicates if the message is addressed to multiple lists that they belong to, but DO want duplicates if they're specifically listed in To:/Cc:/etc. Should we make yet another option for this? Please, comments are definitely appreciated. The patch works for me, as long as the previous patch I sent to the list (allowing users to actually set options) is applied. This and my previous patches are all available at: http://nausicaa.interq.or.jp/mailman/ Patch follows. diff -x CVS -x messages -ruN mailman.orig/Mailman/Cgi/options.py mailman/Mailman/Cgi/options.py --- mailman.orig/Mailman/Cgi/options.py Thu Aug 2 13:14:43 2001 +++ mailman/Mailman/Cgi/options.py Tue Aug 28 22:10:21 2001 @@ -375,6 +375,7 @@ ('conceal', mm_cfg.ConcealSubscription), ('remind', mm_cfg.SuppressPasswordReminder), ('rcvtopic', mm_cfg.ReceiveNonmatchingTopics), + ('nodupes', mm_cfg.DontReceiveDuplicates), ): try: newval = int(cgidata.getvalue(item)) @@ -449,9 +450,18 @@ global_remind = newval break - if global_enable is not None or global_remind is not None: + global_nodupes = None + if cgidata.getvalue('nodupes-globally'): + for flag, newval in newvals: + if flag == mm_cfg.DontReceiveDuplicates: + global_nodupes = newval + break + + if (global_enable is not None or global_remind is not None + or global_nodupes is not None): for gmlist in lists_of_member(mlist.host_name, user): - global_options(gmlist, user, global_enable, global_remind) + global_options(gmlist, user, global_enable, global_remind, + global_nodupes) # Now print the results if cantdigest: @@ -526,6 +536,10 @@ mlist.FormatOptionButton(mm_cfg.ConcealSubscription, 0, user)) replacements['<mm-hide-subscription-button>'] = mlist.FormatOptionButton( mm_cfg.ConcealSubscription, 1, user) + replacements['<mm-dont-receive-duplicates-button>'] = ( + mlist.FormatOptionButton(mm_cfg.DontReceiveDuplicates, 1, user)) + replacements['<mm-receive-duplicates-button>'] = ( + mlist.FormatOptionButton(mm_cfg.DontReceiveDuplicates, 0, user)) replacements['<mm-unsubscribe-button>'] = ( mlist.FormatButton('unsub', _('Unsubscribe')) + ' ' + CheckBox('unsubconfirm', 1, checked=0).Format() + @@ -555,6 +569,8 @@ CheckBox('deliver-globally', 1, checked=0).Format()) replacements['<mm-global-remind-button>'] = ( CheckBox('remind-globally', 1, checked=0).Format()) + replacements['<mm-global-nodupes-button>'] = ( + CheckBox('nodupes-globally', 1, checked=0).Format()) days = int(mm_cfg.PENDING_REQUEST_LIFE / mm_cfg.days(1)) if days > 1: @@ -741,7 +757,7 @@ -def global_options(mlist, user, global_enable, global_remind): +def global_options(mlist, user, global_enable, global_remind, global_nodupes): def sigterm_handler(signum, frame, mlist=mlist): # Make sure the list gets unlocked... mlist.Unlock() @@ -762,6 +778,10 @@ if global_remind is not None: mlist.setMemberOption(user, mm_cfg.SuppressPasswordReminder, global_remind) + + if global_nodupes is not None: + mlist.setMemberOption(user, mm_cfg.DontReceiveDuplicates, + global_nodupes) mlist.Save() finally: diff -x CVS -x messages -ruN mailman.orig/Mailman/Defaults.py.in mailman/Mailman/Defaults.py.in --- mailman.orig/Mailman/Defaults.py.in Tue Aug 21 00:04:21 2001 +++ mailman/Mailman/Defaults.py.in Tue Aug 28 21:15:10 2001 @@ -269,6 +269,7 @@ 'Hold', 'Tagger', 'CalcRecips', + 'AvoidDuplicates', 'Cleanse', 'CookHeaders', 'ToDigest', @@ -722,6 +723,7 @@ ConcealSubscription = 16 SuppressPasswordReminder = 32 ReceiveNonmatchingTopics = 64 +DontReceiveDuplicates = 128 # Authentication contexts. # diff -x CVS -x messages -ruN mailman.orig/Mailman/HTMLFormatter.py mailman/Mailman/HTMLFormatter.py --- mailman.orig/Mailman/HTMLFormatter.py Sat Aug 18 06:18:43 2001 +++ mailman/Mailman/HTMLFormatter.py Tue Aug 28 21:15:31 2001 @@ -117,6 +117,7 @@ mm_cfg.ConcealSubscription : 'conceal', mm_cfg.SuppressPasswordReminder : 'remind', mm_cfg.ReceiveNonmatchingTopics : 'rcvtopic', + mm_cfg.DontReceiveDuplicates : 'nodupes', }[type] return '<input type=radio name="%s" value="%d"%s>' % ( name, value, checked) diff -x CVS -x messages -ruN mailman.orig/Mailman/Handlers/AvoidDuplicates.py mailman/Mailman/Handlers/AvoidDuplicates.py --- mailman.orig/Mailman/Handlers/AvoidDuplicates.py Thu Jan 1 09:00:00 1970 +++ mailman/Mailman/Handlers/AvoidDuplicates.py Tue Aug 28 22:17:46 2001 @@ -0,0 +1,118 @@ +# Copyright (C) 1998,1999,2000,2001 by the Free Software Foundation, Inc. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation; either version 2 +# of the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +"""If the user wishes it, do not send duplicates of the same message. + +This module keeps an in-memory dictionary of Message-ID and recipient +pairs. If a message with an identical Message-ID is about to be sent +to someone who has already received a copy, we either drop the message, +add a duplicate warning header, or pass it through, depending on the +user's preferences. +""" + +import string + +from Mailman import mm_cfg +from Mailman import Utils +from Mailman import Message +from Mailman import Errors +from Mailman.i18n import _ +from mimelib.address import getaddresses + + + +class DuplicateDetected(Errors.DiscardMessage): + """The message would have been sent multiple times to a user who + prefers not to receive duplicates.""" + +# A dictionary of dictionaries, used to store which recipients have received +# which message IDs. +recip_msgids = {} + + + +def process(mlist, msg, msgdata): + + recips = msgdata['recips'] + msgid = msg.get('message-id') + + if not recips or not msgid: + return + + # This dictionary will hold recips who want their mail to have + # the X-Mailman-Duplicate: yes header. + if not msgdata.has_key('add-dupe-header'): + msgdata['add-dupe-header'] = {} + + # Happily borrowed from mimelib.getaddresses() example + tos = msg.getall('to') + ccs = msg.getall('cc') + resent_tos = msg.getall('resent-to') + resent_ccs = msg.getall('resent-cc') + external_recips = getaddresses(tos + ccs + resent_tos + resent_ccs) + + # Anyone mentioned in the to/cc/resent-to/resent-cc headers should + # not get a duplicate of the message. + for (name, email) in external_recips: + + # If getaddresses fails, email could be null. Skip those. + if not email: + continue + + # Initialize the external recipient's msgid hash if this is the + # first email they've received with this message-id. + if not recip_msgids.has_key(email): + recip_msgids[email] = {} + + # We don't do anything except record that that address has + # gotten or will get a copy of this email externally. + recip_msgids[email][msgid] = 1 + + newrecips = [] + + for r in recips: + if not recip_msgids.has_key(r): + recip_msgids[r] = {} + + # If they have received a message with this message-id already, + # see if they don't want duplicates. + if recip_msgids[r].has_key(msgid): + send_duplicate = 1 + + # If the member wants to receive duplicates, or if the recipient + # is not a member at all, just flag the X-Mailman-Duplicate: yes + # header. + try: + if mlist.getMemberOption(r, mm_cfg.DontReceiveDuplicates): + send_duplicate = 0 + except Errors.NotAMemberError: + pass + + # We'll send a duplicate unless the user doesn't wish it. + # If personalization is enabled, the add-dupe-header flag will + # add a X-Mailman-Duplicate: yes header for this user's message. + if send_duplicate: + msgdata['add-dupe-header'][r] = 1 + newrecips.append(r) + + else: + # Otherwise, this is the first time they've been in the recips + # list. Add them to the newrecips list and flag them as having + # received this message. + recip_msgids[r][msgid] = 1 + newrecips.append(r) + + msgdata['recips'] = newrecips diff -x CVS -x messages -ruN mailman.orig/Mailman/Handlers/Personalize.py mailman/Mailman/Handlers/Personalize.py --- mailman.orig/Mailman/Handlers/Personalize.py Sat Aug 18 06:20:58 2001 +++ mailman/Mailman/Handlers/Personalize.py Tue Aug 28 21:10:17 2001 @@ -46,11 +46,23 @@ msg['To'] = '%s (%s)' % (member, name) else: msg['To'] = member + + # We can flag the mail as a duplicate for each member, if + # they've already received that message. (See AvoidDuplicates.py) + if msgdata['add-dupe-header'].has_key(member): + msg['X-Mailman-Duplicate'] = 'yes' + elif msg.has_key('X-Mailman-Duplicate'): + del msg['X-Mailman-Duplicate'] + inq.enqueue(msg, metadatacopy, listname=mlist.internal_name()) # Restore the original To: line del msg['To'] msg['To'] = originalto + + # The original message is not a duplicate. + if msg.has_key('X-Mailman-Duplicate'): + del msg['X-Mailman-Duplicate'] # Don't let the normal ToOutgoing processing actually send the original # copy. diff -x CVS -x messages -ruN mailman.orig/Mailman/MailCommandHandler.py mailman/Mailman/MailCommandHandler.py --- mailman.orig/Mailman/MailCommandHandler.py Fri Aug 17 14:37:15 2001 +++ mailman/Mailman/MailCommandHandler.py Tue Aug 28 21:19:44 2001 @@ -80,27 +80,36 @@ you get digests in MIME format, which are much better if you have a mail reader that supports MIME.""") -option_desc = {'hide' : HIDE, - 'nomail' : NOMAIL, - 'ack' : ACK, - 'notmetoo': NOTMETOO, - 'digest' : DIGEST, - 'plain' : PLAIN, +NODUPES = _("""When turned on, you do *not* receive duplicate mails if mail is +sent to multiple lists that you belong to. This option will let you avoid +duplicate mails; if you turn it on, you will never receive multiple copies +of the same message. Also, if you *and* the list are mentioned explicitly +in the To: or Cc: headers of a message, you will not receive duplicates if +this is turned on.""") + +option_desc = {'hide' : HIDE, + 'nomail' : NOMAIL, + 'ack' : ACK, + 'notmetoo' : NOTMETOO, + 'digest' : DIGEST, + 'plain' : PLAIN, + 'nodupes' : NODUPES, } # jcrey: and then the real one _ = Mailman.i18n._ -option_info = {'hide' : mm_cfg.ConcealSubscription, - 'nomail' : mm_cfg.DisableDelivery, - 'ack' : mm_cfg.AcknowledgePosts, - 'notmetoo': mm_cfg.DontReceiveOwnPosts, - 'digest' : 0, - 'plain' : mm_cfg.DisableMime, +option_info = {'hide' : mm_cfg.ConcealSubscription, + 'nomail' : mm_cfg.DisableDelivery, + 'ack' : mm_cfg.AcknowledgePosts, + 'notmetoo' : mm_cfg.DontReceiveOwnPosts, + 'digest' : 0, + 'plain' : mm_cfg.DisableMime, + 'nodupes' : mm_cfg.DontReceiveDuplicates } # ordered list -options = ('hide', 'nomail', 'ack', 'notmetoo', 'digest', 'plain') +options = ('hide', 'nomail', 'ack', 'notmetoo', 'digest', 'plain', 'nodupes') # strip just the outer layer of quotes quotecre = re.compile(r'["\'`](?P<cmd>.*)["\'`]') diff -x CVS -x messages -ruN mailman.orig/templates/en/help.txt mailman/templates/en/help.txt --- mailman.orig/templates/en/help.txt Sat May 19 06:28:54 2001 +++ mailman/templates/en/help.txt Tue Aug 28 21:21:56 2001 @@ -79,6 +79,10 @@ Conceals your address when people look at who is on this list. + nodupes: + Turn this on if you do not want to receive duplicate mail + from the list, in case you are explicitly in the To: or Cc: + fields already or are included in multiple lists in one message. options Show the current values of your list options. diff -x CVS -x messages -ruN mailman.orig/templates/en/options.html mailman/templates/en/options.html --- mailman.orig/templates/en/options.html Thu Jul 19 06:54:40 2001 +++ mailman/templates/en/options.html Tue Aug 28 22:09:46 2001 @@ -280,6 +280,26 @@ <mm-receive-nonmatching-topics>Yes </td></tr> + <tr><td bgcolor="#cccccc"> + Avoid duplicate copies of messages? + + When you are listed explicitly in the To: or Cc: headers + of a list message, or a message is sent to multiple lists + that you are a member of, you can opt to not receive another + copy from the mailing list. Select Yes to avoid + receiving duplicate copies from the mailing list; select + No to receive duplicate copies. + + If the list has per-message personalization + enabled, every duplicate mail will have a + <tt>X-Mailman-Duplicate: yes</tt> header added to it. + + </td><td bgcolor="#cccccc"> + <mm-receive-duplicates-button>No + <mm-dont-receive-duplicates-button>Yes + <mm-global-nodupes-button>Set globally + </td></tr> + <tr><TD colspan="2"> <center><MM-options-Submit-button></center> </td></tr> -- Brought to you by the letters M and V and the number 8. "Hoosh is a kind of soup." Debian GNU/Linux maintainer of Gimp and GTK+ -- http://www.debian.org/

2 3