Mailman 3 May 2004 - Mailman-Users

How to change charecter coding in general list information page?
by Victor Komarov 06 May '04

06 May '04

Hello all. I see one bug in my general list information page http://schooner.coastlandtech.com/mailman/listinfo/speleo-info Each time when user look this page, it is in ASCII-USA charecter coding, not in correct Cyrillic (KOI-8R). So russian (cyrillic) text in the page is unreadable... The page must be reloaded again after changing charecter coding to KOI-8R for reading cyrillic text. How can I fixed this bug? Thank you. -- Victor Komarov

1 0

Re: Emails not processing
by Paul H Byerly 06 May '04

06 May '04

Steffan Noord wrote: >I did a fresh install of version 2.1.4 >Installation went fine browser is up >Cron is running aliases is set That version runs as a daemon, not from cron - did you do <[prefix>/mailman/ bin/mailmanctl start? <>< Paul

2 1

Moderator
by Sacha H. Dick 06 May '04

06 May '04

Sorry to bother you, but I can't find an answer to my question and have not gotten a response from a couple other emails to other people. I am the moderator of a list and need to be able to send out emails to the list from me as a moderator with out it having to be "approved" first. I just want to send it directly. Also, is there a way to set it up to send something out at a specific day/time in the future? Sacha H. Dick Southeastern Association of Fire Chiefs 785/423-1818 (work/cell) 785/542-3511 (Fax) seafc(a)iafc.org www.seafc.org

3 2

Changing the web_page_url parameter
by Ed Greenberg 06 May '04

06 May '04

Is it possible to change the web_page_url parameter using the mailman/admin/listname website? If so, where... I don't see it. If not, how do I change it? Thanks, </edg> Ed Greenberg

2 1

Question on Mailman site list.
by Kevin W. Gagel 06 May '04

06 May '04

Some time ago I setup mailman, followed some instructions on creating the mailman site list. Now I find I can't access its admin page and I'm not sure what I did. Each time I try to get to the admin page of the mailman list I am redirected back to the list index page for all of the lists. Any ideas? -------------------------------------------------------------- The College of New Caledonia, Visit us at http://www.cnc.bc.ca Virus scanning is done on all incoming and outgoing email. --------------------------------------------------------------

2 1

URL in List info text is suddenly "quoted" HTML
by Martin Maechler 06 May '04

06 May '04

It's probably easiest to see what I mean when you look at https://www.stat.math.ethz.ch/mailman/listinfo/ess-help one of the lists I manage. The link "<A HREF=.... ............</A>" is suddenly `shown' (because the "<" etc are quoted in the html source). How can this happen? As ML administrator, I've simply edited the list information [text box] shown on the ...../mailman/admin/ess-help page. Any ideas ? Could it be a problem of the web server software (apache)? --- Please continue CC'ing me on the subject, since I'm not subscribed to mailman-users. Regards, Martin Maechler <maechler(a)stat.math.ethz.ch> http://stat.ethz.ch/~maechler/ Seminar fuer Statistik, ETH-Zentrum LEO C16 Leonhardstr. 27 ETH (Federal Inst. Technology) 8092 Zurich SWITZERLAND phone: x-41-1-632-3408 fax: ...-1228 <><

5 5

Emails not processing
by Tik & Klik Internetdiensten 06 May '04

06 May '04

Hello, I did a fresh install of version 2.1.4 Installation went fine browser is up Cron is running aliases is set Sending a mail to the list is picked up but doesnt be processed. Sendmail says: May 6 16:32:28 www sendmail[19329]: i46EWRA19328: to="|/home/mailman/mail/mailman post netwerk", ctladdr=<netwerk(a)XXXXX.com> (8/0), delay=00:00:01, xdelay=00:00:00, mailer=prog, pri=31148, dsn=2.0.0, stat=Sent So no error Anyone has any idees ? thnx Steffan Noord

2 1

Re: [Mailman-Users] Moderator
by Kevin W. Gagel 06 May '04

06 May '04

----- Original Message Follows ----- From: "Sacha H. Dick" <sachafire(a)worldnet.att.net> To: <mailman-users(a)python.org> Subject: [Mailman-Users] Moderator Date: Wed, 5 May 2004 13:10:48 -0500 > > Sorry to bother you, but I can't find an answer to my question and have not > gotten a response from a couple other emails to other people. > > > > I am the moderator of a list and need to be able to send out emails to the > list from me as a moderator with out it having to be "approved" first. I > just want to send it directly. Also, is there a way to set it up to send > something out at a specific day/time in the future? Since you are the moderator of the list go into the administrative interface. Under the Members section locate your email address and then remove the mod check mark. Then when you send to the list it will go out with out requiring you to approve it. As for sending at specific day or time, I don't the know the answer to it. Perhaps someone more familiar with mailman can help. ==================== Kevin W. Gagel Network Administrator (250) 561-5848 local 448 (250) 562-2131 local 448 -------------------------------------------------------------- The College of New Caledonia, Visit us at http://www.cnc.bc.ca Virus scanning is done on all incoming and outgoing email. --------------------------------------------------------------

1 0

(no subject)
by Anthony Diak 06 May '04

06 May '04

Hello all. I am having some problems with a mailman list I am trying to setup. First let me tell you my configuration: Xserve G4 10.3 Server Mailman 2.1.2 (os x package-part of the server) Everything is up to date - all patches and updates What the people who want the list setup want is to have every post be moderated, no matter what. I figured out how to do this simply enough. They also want the moderator to receive emails whenever a post is submitted so that they can approve it asap. I set a password different from the admin password for the moderator, and supplied a moderator in the moderator field. I turned on "Should the list moderators get immediate notice of new requests, as well as daily notices about collected ones" to Yes, and to my understanding, the moderator should get messages whenever I send a message to the list. The posts are being send to the moderation que and await moderation, but the moderator never gets an email saying there are requests waiting. Is there something I'm missing, a bug in this version, or something else? Any help would be greatly appreciated. Thank you, Anthony.

1 0

Headers in Digests
by Charles Little 06 May '04

06 May '04

Hello- In the digests for my list, I am getting unwanted headers, i.e. To: [To header omitted] Message-ID: <5.1.0.14.0.20040505220249.031b6c20@[censored]> Content-Type: text/plain; charset="us-ascii"; format=flowed I placed the following in mm_cfg.py: MIME_DIGEST_KEEP_HEADERS = ['message', 'date', 'from', 'subject'] PLAIN_DIGEST_KEEP_HEADERS = ['message', 'date', 'from', 'subject'] But the settings are only applied during manual generation of the digest, not during autogeneration. What am I doing wrong? Thanks! -------------------------------------------- Charles Little | President/Sr. Developer Infinite Visions Studios | http://corp.ivs.cc clittle(a)corp.ivs.cc | (404) 606-0455 | (770) 879-3628 ...there are no limits...

1 0