Mailman 3 March 2003 - Mailman-Users

RE: [Mailman-Users] archive from text files or from .eml files
by Adam Lipson March 3, 2003

March 3, 2003

Thanks Jeff, That was way to easy and simplistic. I was thinking of a much more complex solution :) Adam -----Original Message----- From: Jeff Hahn [mailto:jeffh@gryphongardens.com] Sent: Monday, March 03, 2003 2:05 PM To: mailman-users(a)python.org Subject: Re: [Mailman-Users] archive from text files or from .eml files On Mon, 3 Mar 2003, Adam Lipson wrote: > I am setting up a new list (server as well) and my old list is on a > windows box with software by Lyris. We are moving … [View More]

1 0

FW: html emails
by Pamela Wilson March 3, 2003

March 3, 2003

I have an announce-only list that I manage with Mailman. I subscribe and unsubscribe folks--they don't have access to the admin tools. I've been trundling along fine sending twice-monthly plain-text emails to the list. Now, however, I must begin sending HTML emails. Here are my neophyte questions. 1. Where is the setting for allowing messages that aren't just text? I tried to send an HTML email to the list once and it got stripped before it was delivered. I know there's that "plain" checkbox … [View More]

2 1

archive from text files or from .eml files
by Adam Lipson March 3, 2003

March 3, 2003

After searching the archives of this list I did not see the answer to my question, so can anyone out there address this question? I am setting up a new list (server as well) and my old list is on a windows box with software by Lyris. We are moving away and have all our data saved in outlook and in a foxpro database. To the best of my knowledge neither of these can be exported to a Unix mbox file so am kinda stuck as far as using the normal import to an archive. Is there another way to do it … [View More]

2 1

Failures after Sendmail upgrade
by Bob Sully March 3, 2003

March 3, 2003

Just upgraded to Mailman 2.0.13 from 2.0.8 a couple of weeks ago. Last week I upgraded Sendmail from 8.12.3 to 8.12.7. I got a bunch of these back today (after the monthly reminders were sent out). Is this a Mailman issue or sendmail? The original message was received at Sat, 1 Mar 2003 05:00:14 -0800 from cust.64-52-19.058.ip.ebrb.net [64.52.19.58] with id h21D0E40020264 ----- The following addresses had permanent fatal errors ----- "| /var/mailman/mail/wrapper mailowner samohi74" … [View More]

3 5

"import site' failed
by Larry Hansford March 3, 2003

March 3, 2003

One of my servers crashed, and was restored, but Mailman doesn't run. I've tried re-installing Mailman (v2.1.1), and it indicates that the configuration completed with no problems. When I do 'make install' there are a number of messages that scroll by indicating that 'import site' failed. But, when I do a 'bin/check_perms' it gets the following error: 'import site' failed; use -v for traceback What am I missing that is causing this error? Thanks! Larry

2 3

(no subject)
by Lanismygirl＠aol.com March 3, 2003

March 3, 2003

I would like to unsubscribe rgds lanismygirl

1 0

RE: [Mailman-Users] mm_cfg.py question
by Neulinger, Nathan March 3, 2003

March 3, 2003

Oh... No idea then... Sorry. -- Nathan ------------------------------------------------------------ Nathan Neulinger EMail: nneul(a)umr.edu University of Missouri - Rolla Phone: (573) 341-4841 Computing Services Fax: (573) 341-4216 > -----Original Message----- > From: JvdW [mailto:r2d2@yebo.co.za] > Sent: Monday, March 03, 2003 9:09 AM > To: Neulinger, Nathan; Mailman-Users(a)python.org > Subject: Re: [Mailman-Users] … [View More]mm_cfg.py question > > > I have and the only fields I can find are > OWNERS_CAN_ENABLE_PERSONALIZATION > and VERP_PERSONALIZED_DELIVERIES. I placed this in my > mm_cfg.py file and set > both to 1. Still it stays on "No" by default. Even when removing and > re-creating the list. > > Any other ideas. > > l8r > JvdW > > > On Monday 03 March 2003 16:25, Neulinger, Nathan wrote: > > You should be able to find all of the options listed in Defaults.py > > > > -- Nathan > > > > ------------------------------------------------------------ > > Nathan Neulinger EMail: nneul(a)umr.edu > > University of Missouri - Rolla Phone: (573) 341-4841 > > Computing Services Fax: (573) 341-4216 > > > > > -----Original Message----- > > > From: JvdW [mailto:r2d2@yebo.co.za] > > > Sent: Monday, March 03, 2003 8:09 AM > > > To: Mailman-Users(a)python.org > > > Subject: [Mailman-Users] mm_cfg.py question > > > > > > > > > Hi all > > > > > > Can someone please give me the "string" to add to the > > > mm_cfg.py file that > > > would set the value of "Should Mailman personalize each > > > non-digest delivery?" > > > under the Non-Digest menu to "Yes" for all new lists? > > > > > > Thanks! > > > > > > -- > > > l8r > > > ./JvdW > > > > > > ------------------------------------------------------ > > > Mailman-Users mailing list > > > Mailman-Users(a)python.org > > > http://mail.python.org/mailman/listinfo/mailman-users > > > Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py > > > Searchable Archives: > > > http://www.mail-archive.com/mailman-users%> 40python.org/ > > > > > > This > > > message was sent to: nneul(a)umr.edu > > > > > > Unsubscribe or change your options at > > > > http://mail.python.org/mailman/options/mailman> -users/nneul%40umr.edu > > > > ------------------------------------------------------ > > Mailman-Users mailing list > > Mailman-Users(a)python.org > > http://mail.python.org/mailman/listinfo/mailman-users > > Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py > > Searchable Archives: > > http://www.mail-archive.com/mailman-users%40python.org/ > > > > This message was sent to: r2d2(a)yebo.co.za > > Unsubscribe or change your options at > > > http://mail.python.org/mailman/options/mailman> -users/r2d2%40yebo.co.za > > [View Less]

1 0

RE: [Mailman-Users] mm_cfg.py question
by Neulinger, Nathan March 3, 2003

March 3, 2003

You should be able to find all of the options listed in Defaults.py -- Nathan ------------------------------------------------------------ Nathan Neulinger EMail: nneul(a)umr.edu University of Missouri - Rolla Phone: (573) 341-4841 Computing Services Fax: (573) 341-4216 > -----Original Message----- > From: JvdW [mailto:r2d2@yebo.co.za] > Sent: Monday, March 03, 2003 8:09 AM > To: Mailman-Users(a)python.org > Subject: [… [View More]

2 1

mm_cfg.py question
by JvdW March 3, 2003

March 3, 2003

Hi all Can someone please give me the "string" to add to the mm_cfg.py file that would set the value of "Should Mailman personalize each non-digest delivery?" under the Non-Digest menu to "Yes" for all new lists? Thanks! -- l8r ./JvdW

1 0

RE : [Mailman-Users] wrapper executing, but doing NOTHING
by Frederic Perrouin March 3, 2003

March 3, 2003

I've got same problem, did you found some solutions ??? -----Message d'origine----- De : Joel Glickman [mailto:joel_m@joelglickman.com] Envoyé : jeudi 5 décembre 2002 15:43 À : mailman-users(a)python.org Objet : [Mailman-Users] wrapper executing, but doing NOTHING - Running RH7.2, sendmail, mailman 2.0.12 - mailman user & group exist -- /home/mailman exists with correct permissions - ./configure --with-mail-gid=mail --with-cgi-gid=apache, (When configuration script runs, it properly … [View More]converts mail to 12 and apache to 48, which reflect what's in my /etc/group file) - make install - ln -s /home/mailman/mail/wrapper /etc/smrsh/wrapper - /home/mailman/bin/check_perms returns "No problems found" - Added "tmh" mailling list, added some list members, including joel_m(a)joelglickman.com -- checkbox options are "subscr and plain" - List members DID receive a welcome message from tmh-admin, which means that the wrapper is working properly from the web side - Now, a list member (joel_m) sends a message to tmh(a)tmh.joelglickman.com -- it gets redirected to wrapper .. and NOTHING -- wrapper isn't then sending the message along to list members. And I get no error messages whatsoever? Here's what I get in my maillog: Dec 5 09:24:49 tmh sendmail[10805]: gB5EOnB10805: from=<joel_m(a)joelglickman.com>, size=1107, class=0, nrcpts=1, msgid=<5.2.0.9.0.20021205092912.029557f0(a)192.168.1.15>, proto=ESMTP, daemon=MTA, relay=homelan.joelglickman.com [192.168.1.15] Dec 5 09:24:51 tmh sendmail[10806]: gB5EOnB10805: to="|/etc/smrsh/wrapper post tmh", ctladdr=<tmh(a)tmh.joelglickman.com> (8/0), delay=00:00:02, xdelay=00:00:01, mailer=prog, pri=30553, dsn=2.0.0, stat=Sent --- and that's it in maillog -- It doesn't then start resending the message to those on the mailing list? An email to tmh-owner yields similar disappointing results Dec 5 09:32:28 tmh sendmail[10848]: gB5EWSB10848: from=<joel_m(a)joelglickman.com>, size=1121, class=0, nrcpts=1, msgid=<5.2.0.9.0.20021205093641.029543b0(a)192.168.1.15>, proto=ESMTP, daemon=MTA, relay=homelan.joelglickman.com [192.168.1.15] Dec 5 09:32:29 tmh sendmail[10849]: gB5EWSB10848: to="|/etc/smrsh/wrapper mailowner tmh", ctladdr=tmh-admin (8/0), delay=00:00:01, xdelay=00:00:01, mailer=prog, pri=30554, dsn=2.0.0, stat=Sent --- and no message is sent to the owner .. and no error? For reference --- /etc/aliases (and yes I ran ./newaliases) ## tmh mailing list ## created: 17-Sep-2002 root # Had to modify to use /etc/smrsh secure shell directory tmh: "|/etc/smrsh/wrapper post tmh" tmh-admin: "|/etc/smrsh/wrapper mailowner tmh" tmh-request: "|/etc/smrsh/wrapper mailcmd tmh" tmh-owner: tmh-admin Also, executing /etc/smrsh/wrapper from the shell as root yields: [root@tmh mailman-2.0.12]# /etc/smrsh/wrapper post tmh Failure to exec script. WANTED gid 12, GOT gid 0. (Reconfigure to take 0?) ... which seems quite normal to me. I did recompile with-mail-gid=0 so that i could execute it as root from the prompt .. When I did, it looked for data from stdin --- so I typed a hello world message, hit control-d and just got my prompt back .. It didn't do anything, as evidenced by the maillog. Anyone have any advice? I've RTFM'd and think I've done everything right? ------------------------------------------------------ Mailman-Users mailing list Mailman-Users(a)python.org http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ This message was sent to: frederic.perrouin(a)unilog.fr Unsubscribe or change your options at http://mail.python.org/mailman/options/mailman-users/frederic.perrouin%40un… [View Less]

1 0